C-Terminal Protein Characterization by Mass Spectrometry: Isolation of C-Terminal Fragments from Cyanogen Bromide-Cleaved Protein

A sample preparation method for protein C-terminal peptide isolation from cyanogen bromide (CNBr) digests has been developed. In this strategy, the analyte was reduced and carboxyamidomethylated, followed by CNBr cleavage in a one-pot reaction scheme. The digest was then adsorbed on ZipTip_C18 pipette tips for conjugation of the homoserine lactone-terminated peptides with 2,2′-dithiobis (ethylamine) dihydrochloride, followed by reductive release of 2-aminoethanethiol from the derivatives. The thiol-functionalized internal and N-terminal peptides were scavenged on activated thiol sepharose, leaving the C-terminal peptide in the flow-through fraction. The use of reversed-phase supports as a venue for peptide derivatization enabled facile optimization of the individual reaction steps for throughput and completeness of reaction. Reagents were replaced directly on the support, allowing the reactions to proceed at minimal sample loss. By this sequence of solid-phase reactions, the C-terminal peptide could be recognized uniquely in mass spectra of unfractionated digests by its unaltered mass signature. The use of the sample preparation method was demonstrated with low-level amounts of a whole, intact model protein. The C-terminal fragments were retrieved selectively and efficiently from the affinity support. The use of covalent chromatography for C-terminal peptide purification enabled recovery of the depleted material for further chemical and/or enzymatic manipulation. The sample preparation method provides for robustness and simplicity of operation and is anticipated to be expanded to gel-separated proteins and in a scaled-up format to high-throughput protein profiling in complex biological mixtures.     

Chemical synthesis of cell-permeable apoptotic peptides from in vivo produced proteins

In vivo synthesis of peptides by bacterial expression has developed into a reliable alternative to solid-phase peptide synthesis. A significant drawback of in vivo methods is the difficulty with which gene products can be modified post-translationally. Here, we present a method for the facile modification of peptides generated in bacterial hosts after cyanogen bromide cleavage at C-terminal methionines. Reaction of the resulting homoserine lactones with propargylamine allows efficient and selective modification with a wide variety of chemicals such as fluorescent dyes, biotin derivatives, polyprenyls, lipids, polysaccharides, or peptides. Attachment of the cell penetrating peptide octa-arginine (R(8)) to peptides derived from the proapoptotic tumor suppressor Bak BH3 led to efficient cellular uptake and subsequent cytochrome c release from mitochondria, culminating in induction of apoptosis similar to that observed with peptides linked to R(8) via the peptide backbone. These results highlight the significant potential for use of such tools in live cells.     

A new chemical approach to differentiate carboxy terminal peptide fragments in cyanogen bromide digests of proteins

We present a novel approach to perform C-terminal sequence analysis by discriminating the C-terminal peptide in a mass spectral analysis of a CNBr digest. During CNBr cleavage, all Met-Xxx peptide bonds are cleaved and the generated internal peptides all end with a homoserine lactone (hsl)-derivative. The partial opening of the hsl-derivatives, by using a slightly basic buffer solution, results in the formation of m/z doublets (Δm = 18 Da) for all internal peptides and allows to identify the C-terminal peptide which appears as a singlet in the mass spectra. Using two model proteins we demonstrate that this approach can be applied to study proteins purified in gel or in solution. The chemical opening of the hsl-derivative does not require any sample clean-up and therefore, the sensitivity of the C-terminal sequencing approach is increased significantly. Finally, the new protocol was applied to characterize the C-terminal sequence of two recombinant proteins. Tandem mass spectrometry by MALDI-TOF/TOF allowed to identify the sequence of the C-terminal peptides. This novel approach will allow to perform a proteome-wide study of C-terminal proteolytic processing events in a high-throughput fashion.     

Trypsin cleaves exclusively C-terminal to arginine and lysine residues

Almost all large-scale projects in mass spectrometry-based proteomics use trypsin to convert protein mixtures into more readily analyzable peptide populations. When searching peptide fragmentation spectra against sequence databases, potentially matching peptide sequences can be required to conform to tryptic specificity, namely, cleavage exclusively C-terminal to arginine or lysine. In many published reports, however, significant numbers of proteins are identified by non-tryptic peptides. Here we use the sub-parts per million mass accuracy of a new ion trap Fourier transform mass spectrometer to achieve more than a 100-fold increased confidence in peptide identification compared with typical ion trap experiments and show that trypsin cleaves solely C-terminal to arginine and lysine. We find that non-tryptic peptides occur only as the C-terminal peptides of proteins and as breakup products of fully tryptic peptides N-terminal to an internal proline. Simulating lower mass accuracy led to a large number of proteins erroneously identified with non-tryptic peptide hits. Our results indicate that such peptide hits in previous studies should be re-examined and that peptide identification should be based on strict trypsin specificity.     

Solid-phase synthesis of C-terminally modified peptides.

In this paper, a straightforward and generic protocol is presented to label the C-terminus of a peptide with any desired moiety that is functionalized with a primary amine. Amine-functional molecules included are polymers (useful for hybrid polymers), long alkyl chains (used in peptide amphiphiles and stabilization of peptides), propargyl amine and azido propyl-amine (desirable for 'click' chemistry), dansyl amine (fluorescent labeling of peptides) and crown ethers (peptide switches/hybrids). In the first part of the procedure, the primary amine is attached to an aldehyde-functional resin via reductive amination. To the secondary amine that is produced, an amino acid sequence is coupled via a standard solid-phase peptide synthesis protocol. Since one procedure can be applied for any given amine-functional moiety, a robust method for C-terminal peptide labeling is obtained.     

Evolutionary origin and divergence of PQRFamide peptides and LPXRFamide peptides in the RFamide peptide family. Insights from novel lamprey RFamide peptides

Among the RFamide peptide groups, PQRFamide peptides, such as neuropeptide FF (NPFF) and neuropeptide AF (NPAF), share a common C-terminal Pro-Gln-Arg-Phe-NH(2) motif. LPXRFamide (X = L or Q) peptides, such as gonadotropin-inhibitory hormone (GnIH), frog growth hormone-releasing peptide (fGRP), goldfish LPXRFamide peptide and mammalian RFamide-related peptides (RFRPs), also share a C-terminal Leu-Pro-Leu/Gln-Arg-Phe-NH(2) motif. Such a similar C-terminal structure suggests that these two groups may have diverged from a common ancestral gene. In this study, we sought to clarify the evolutionary origin and divergence of these two groups, by identifying novel RFamide peptides from the brain of sea lamprey, one of only two extant groups of the oldest lineage of vertebrates, Agnatha. A novel lamprey RFamide peptide was identified by immunoaffinity purification using the antiserum against LPXRFamide peptide. The lamprey RFamide peptide did not contain a C-terminal LPXRFamide motif, but had the sequence SWGAPAEKFWMRAMPQRFamide (lamprey PQRFa). A cDNA of the precursor encoded one lamprey PQRFa and two related peptides. These related peptides, which also had the C-terminal PQRFamide motif, were further identified as mature endogenous ligands. Phylogenetic analysis revealed that lamprey PQRFamide peptide precursor belongs to the PQRFamide peptide group. In situ hybridization demonstrated that lamprey PQRFamide peptide mRNA is expressed in the regions predicted to be involved in neuroendocrine and behavioral functions. This is the first demonstration of the presence of RFamide peptides in the agnathan brain. Lamprey PQRFamide peptides are considered to have retained the most ancestral features of PQRFamide peptides.     

Primary structure of the OSCP protein that confers sensitivity to oligomycin on the mitochondrial H+-ATPase complex. I. Tryptic and cyanogen bromide peptides

Trypsin and cyanogen bromide were used for cleavage of the OSCP preparations. The peptide mixtures thus formed were separated into individual components by a combination of various chromatographic procedures: gel filtration, ion exchange and paper chromatography, as well as reversed-phase HPLC. As a result, 31 tryptic peptides and 9 out of 10 possible cyanogen bromide peptides were isolated. Determination of the amino acid sequences of these peptide allowed the alignment of cyanogen bromide fragments in the polypeptide chain that shed light on the "architecture" of the protein molecule as a whole. It also afforded the overlappings for tryptic peptides, 16 in the N-terminal and 8 in the C-terminal portions of the molecule.     

Cross-linking of collagen. Location of pyridinoline in bovine articular cartilage at two sites of the molecule.

The location of pyridinoline in 18-month-old bovine articular cartilage was investigated by fractionation of CNBr-derived peptides by ion-exchange chromatography and gel filtration. Two peptides, PCP1 and PCP2, were isolated and were shown to contain stoichiometric amounts of pyridinoline. From its amino acid composition and sequence studies, peptide PCP1 was shown to comprise two C-terminal non-helical chains (CB14) linked through pyridinoline to the alpha 1(II)-CB12 portion of the helix. The CB14 chains appeared to be labile at their C-terminal ends, resulting in lower-than-expected amounts of homoserine, and only the N-terminal portion of the peptide was sequenced. Similar studies of peptide PCP2 showed that it contained two N-terminal non-helical chains (CB4) linked to the alpha 1(II)-CB9,7 portion of the helix. The isolated peptides therefore confirmed the function of pyridinoline in stabilizing the 4D stagger of adjacent molecules. The possibility that the cross-link could act both as an intra- and an inter-microfibrillar cross-link was considered. A mechanism of formation of pyridinoline was postulated that, together with other evidence, appears to support the view that, in cartilage, pyridinoline acts primarily as an intramicrofibrillar cross-link and does not contribute to increased stability during maturation through lateral aggregation and bonding of filaments.     

Amino acid sequence studies on cyanogen bromide peptides of chicken caldesmon which bind to calmodulin

Three major calmodulin-binding cyanogen bromide peptides (fragments A, B, and D) were isolated from chicken gizzard muscle caldesmon and their amino acid sequences were determined. The molecular masses of fragments A, B, and D were estimated to 16, 12, and 9 kDa, respectively, by SDS-urea polyacrylamide gel electrophoresis. Fragment A was composed of 102 amino acid residues and contained homoserine at the C terminus. The amino acid sequence from the 37th residue of fragment A corresponds to the N-terminal sequence of the 15 kDa peptide which was obtained by thrombin digestion [Mornet, D., Audemard, E., & Derancourt, J. (1988) Biochem. Biophys. Res. Commun. 154, 564-571]. Thrombin 15 kDa peptide binds to F-actin but does not bind to calmodulin. Thus the N-terminal 36 residues and the C-terminal part from the 37th residue of fragment A are supposed to bind to calmodulin and F-actin, respectively. The sequences of fragments B and D were identical, but fragment D was composed of 64 amino acid residues and ended with tryptophan, whereas fragment B was of 98 or 99 amino acid residues and ended with proline. Both fragments B and D are supposed to be the C-terminal peptides of chicken caldesmon. Fragment B had heterogeneous sequences at the C-terminal region. These results can explain the reported heterogeneity of chicken caldesmon in charge and molecular mass.     

Isolation and characterization of the cyanogen bromide fragments of lobster arginine kinase (homarus vulgaris).

Arginine kinase was aminoethylated in order to block the five free thiol groups on the native enzyme, and then submitted to BrCN cleavage. The BrCN resulting peptides were soluble in propionic acid (10 percent) and subsequently submitted to gel-filtration. The large polypeptide subfractions were citraconylated and resubmitted to differnt gelchromatographies, whereas the short peptide subfractions were submitted to preparative paper electrochromatographies. Eight peptides of 2, 11, 17, 25, 61, 82, 86 and 132 amino acid residues were isolated, one of which is the overlapping of two peptides. The amino acid composition and the end group of all the isolated peptides were established. The short peptides (2, 11 and 17 residues) were sequenced. All peptides possess homoserine at C-terminal position because one methionyl residue is situated at the C-terminal position in the native protein. The polypeptide with 132 residues possessed N-acetylated residue at N-terminal position: therefore this polypeptide is located at the N-terminal position in the protein. The sum and account of each amino acid of the seven isolated peptides were compared to those of the intact protein: the sum of the seven peptides is 331 amino acid residues, whereas the whole protein contains 342 residues. The molecular weight of arginine kinase is revised and calculated on the basis of the present results (37, 687).     

A novel method for selective isolation of C-terminal peptides from tryptic digests of proteins by immobilized anhydrotrypsin: application to structural analyses of the tail sheath and tube proteins from bacteriophage T4

A novel method useful for selective isolation of the C-terminal peptide from a tryptic digestion mixture of a protein has been developed by taking advantage of a unique property of anhydrotrypsin, which has a strong specific affinity for the peptides containing arginine or lysine at their C-termini. Briefly, peptides produced by tryptic digestion of a protein are fractionated by affinity chromatography on a column of immobilized anhydrotrypsin. The C-terminal peptide is recovered in a breakthrough fraction, while the remainders are adsorbed on the column (unless the protein ends in arginine or lysine). The breakthrough fraction is then subjected to reversed-phase high-performance liquid chromatography in order to purify the C-terminal peptide. Using this method, we have successfully isolated the C-terminal peptides from tryptic digests of the sheath protein (gp 18) and the tube protein (gp 19) of bacteriophage T4. The analytical results on these peptides, together with the information on the N-terminal structures of the original proteins and on the nucleotide sequences of genes 18 and 19, allowed us to establish the complete primary structures of the two proteins.     

A comparative CD and fluorescence study of a series of model calcium-binding peptides

Lanthanide-saturated peptides analogous to calcium-binding loops of EF-hand proteins can be used to stabilize the alpha-helical structure of peptide or protein segments attached to their C-termini. To study conformational properties of such loop-containing hybrids it is necessary to produce them in bacteria. In peptides obtained in this way the helix will be destabilized by the negatively charged C-terminal alpha-carboxyl groups. We propose to block them by the homoserine lactone. The results presented in this paper indicate that the presence of the lactone even at the C-terminus of the loop does not have any negative effect on the loop helix-nucleation ability. On the other hand, the presence of the alpha-NH3+ at the loop N-terminus leads to a drop of metal-binding constant and loss of the rigid structure of the alpha-helical segment of the loop. The alpha-amino group separated by one glycine residue from the loop N-terminus should also be avoided because it perturbs the conformation of the N-terminal part of the loop and may reduce the loop affinity to lanthanide ions.     

Bioorganic synthesis of a recombinant HIV-1 fusion inhibitor,SC35EK,with an N-terminal pyroglutamate capping group

The bioorganic synthesis of an end-capped anti-HIV peptide from a recombinant protein was investigated. Cyanogen bromide-mediated cleavage of two Met-Gln sites across the target anti-HIV sequence generated an HIV-1 fusion inhibitor (SC35EK) analog bearing an N-terminal pyroglutamate (pGlu) residue and a C-terminal homoserine lactone (Hsl) residue. The end-capped peptide, pGlu-SC35EK-Hsl, had similar bioactivity and biophysical properties to the parent peptide, and an improved resistance to peptidase-mediated degradation was observed compared with the non-end-capped peptide obtained using standard recombinant technology.     

Processing and export of peptide pheromones and bacteriocins in Gram-negative bacteria

Cell-density-dependent gene expression is widespread in bacteria and is mediated by extracellular communication molecules. Gram-negative bacteria often use N-acyl homoserine lactones, whereas cell-cell signaling in Gram-positive bacteria is accomplished using post-translationally processed peptide pheromones. In many Gram-positive bacteria, export of these peptides requires the activity of a dedicated ATP-binding cassette (ABC) transporter, which cleaves off a typical leader peptide termed the double-glycine leader sequence concomitant with translocation across the membrane. Inspection of bacterial genome sequences has revealed the presence of similar ABC transporters, as well as genes encoding peptides with double-glycine-type leader sequences in Gram-negative bacteria, and it is suggested that the postulated transported peptides could perform a signaling function.     

Design and NMR conformational study of a beta-sheet peptide based on Betanova and WW domains

A good approach to test our current knowledge on formation of protein beta-sheets is de novo protein design. To obtain a three-stranded beta-sheet mini-protein, we have built a series of chimeric peptides by taking as a template a previously designed beta-sheet peptide, Betanova-LLM, and incorporating N- and/or C-terminal extensions taken from WW domains, the smallest natural beta-sheet domain that is stable in absence of disulfide bridges. Some Betanova-LLM strand residues were also substituted by those of a prototype WW domain. The designed peptides were cloned and expressed in Escherichia coli. The ability of the purified peptides to adopt beta-sheet structures was examined by circular dichroism (CD). Then, the peptide showing the highest beta-sheet population according to the CD spectra, named 3SBWW-2, was further investigated by 1H and 13C NMR. Based on NOE and chemical shift data, peptide 3SBWW-2 adopts a well defined three-stranded antiparallel beta-sheet structure with a disordered C-terminal tail. To discern between the contributions to beta-sheet stability of strand residues and the C-terminal extension, the structural behavior of a control peptide with the same strand residues as 3SBWW-2 but lacking the C-terminal extension, named Betanova-LYYL, was also investigated. beta-Sheet stability in these two peptides, in the parent Betanova-LLM and in WW-P, a prototype WW domain, decreased in the order WW-P > 3SBWW-2 > Betanova-LYYL > Betanova-LLM. Conclusions about the contributions to beta-sheet stability were drawn by comparing structural properties of these four peptides.     

Identification of kinin-related peptides in the disease vector, Rhodnius prolixus

We have used an in silico approach to identify a gene from the blood-gorging vector, Rhodnius prolixus, that is predicted to produce an insect kinin prepropeptide. The prepropeptide is 398 amino acids in length and can potentially produce a large number of kinin-related peptides following post-translational processing. A comparison with other insect kinin precursor sequences demonstrates greatest conservation at the C-terminal region of the kinin peptides. Multiple peptides predicted from the kinin gene are phenotypically expressed in R. prolixus, as revealed by MALDI-TOF MS MS, including 12 kinins and one kinin precursor peptide (KPP). Six of these peptides are characterized by the typical insect kinin C-terminal motif FX₁X₂WGamide and five of these are also found as truncated forms. Five peptides were identified with an atypical, though similar, FX₁X₂WAamide C-terminus. There is also peptide with a C-terminal DDNGamide motif and a number of non-amidated peptides.     

Repeating covalent structure and protective immunogenicity of native and synthetic polypeptide fragments of type 24 streptococcal M protein. Mapping of protective and nonprotective epitopes with monoclonal antibodies

The complete amino acid sequences of three cyanogen bromide peptide fragments (CB3, CB4, and CB50 of type 24 M protein extracted from Streptococcus pyogenes by limited pepsin digestion were determined by automated Edman degradation of the uncleaved peptides and their tryptic peptides. CB3 and CB4 each contain 35 amino acid residues, whereas CB5 contains 37. The sequence of CB3 was found to be: (formula: see text) (where Hse represents homoserine). The sequence of CB4 was identical except for amino acid substitutions of arginine and glutamine at positions 23 and 24, respectively. The sequence of CB5 also was identical with that of CB3 except for substitutions of aspartic acids at positions 28 and 29; leucine, glutamic acid, and glycine at positions 33, 34, and 35, respectively; and an additional two amino acids, alanine and homoserine, at positions 36 and 37, respectively. A comparison of the structures of these three peptide fragments with those previously reported for CB6 and CB7 revealed as few as one to six amino acid substitutions among the five repeating peptides; CB4 and CB6 differed only by a single Asp/Glu substitution at position 26. When covalently linked to polylysine and injected as an emulsion in complete Freund's adjuvant, CB3, CB4, and CB5 each evoked high titers of type-specific opsonic and bactericidal antibodies in rabbits. A chemically synthesized peptide identical with native CB3 except that it contained methionine instead of homoserine at its COOH terminus was similarly immunogenic. None of the conjugated native or synthetic peptides raised antibodies at reacted in immunofluorescence tests with sarcolemmal membranes of human heart tissue. Mapping studies with monoclonal antibodies revealed a number of distinct protective and nonprotective epitopes. The single Asp/Glu substitution between CB4 and CB4 rendered the 35-residue peptide unrecognizable by protective monoclonal antibodies but recognizable by a nonprotective one. Our studies demonstrate that the repeating covalent structures of native and chemically synthesized polypeptide fragments of streptococcal M protein possess several unique as well as repeating epitopes that evoke opsonic and presumably protective, but not heart cross-reactive, antibodies against a rheumatogenic strain of S. pyogenes.     

Structure-activity analysis of quorum-sensing signaling peptides from Streptococcus mutans

Streptococcus mutans secretes and utilizes a 21-amino-acid signaling peptide pheromone to initiate quorum sensing for genetic competence, biofilm formation, stress responses, and bacteriocin production. In this study, we designed and synthesized a series of truncated peptides and peptides with amino acid substitutions to investigate their structure-activity relationships based on the three-dimensional structures of S. mutans wild-type signaling peptide UA159sp and C-terminally truncated peptide TPC3 from mutant JH1005 defective in genetic competence. By analyzing these peptides, we demonstrated that the signaling peptide of S. mutans has at least two functional domains. The C-terminal structural motif consisting of a sequence of polar hydrophobic charged residues is crucial for activation of the signal transduction pathway, while the core alpha-helical structure extending from residue 5 to the end of the peptide is required for receptor binding. Peptides in which three or more residues were deleted from the C terminus did not induce genetic competence but competitively inhibited quorum sensing activated by UA159sp. Disruption of the amphipathic alpha-helix by replacing the Phe-7, Phe-11, or Phe-15 residue with a hydrophilic residue resulted in a significant reduction in or complete loss of the activity of the peptide. In contrast to the C-terminally truncated peptides, these peptides with amino acid substitutions did not compete with UA159sp to activate quorum sensing, suggesting that disruption of the hydrophobic face of the alpha-helical structure results in a peptide that is not able to bind to the receptor. This study is the first study to recognize the importance of the signaling peptide C-terminal residues in streptococcal quorum sensing.     

Determination of the cleavage site involved in C-terminal processing of penicillin-binding protein 3 of Escherichia coli.

Chromatographic peptide mapping of lysyl endopeptidase digests of penicillin-binding protein 3 (PBP 3) of Escherichia coli revealed peptides that differed in retention time between the precursor and mature forms. The peptides were purified from a processing-defective (prc) mutant and a wild-type (prc+) strain. These peptides were identified as the C-terminal region of the precursor form and mature PBP 3 by amino acid sequencing. Each of the C-terminal peptides was cleaved into two fragments by trypsin digestion. By sequencing the resultant carboxyl-side fragment derived from the mature form, it was concluded that the C-terminal residue of mature PBP 3 was Val-577, and thus the Val-577-Ile-578 bond is the cleavage site for processing. This conclusion was consistent with the amino acid compositions of the relevant peptides, which suggested that the peptide from the cleavage site to the end of the deduced sequence (Ile-578-Ser-588) was present in the precursor but absent in the mature form. One lysyl peptide bond resisted both lysyl endopeptidase and trypsin and remained uncleaved in the peptide analyzed above.     

Affinity alkylation of 3-oxo-delta 5-steroid isomerase by steroidal 3 beta-oxiranes: identification of the modified amino acid by reduction with hydroxyborohydride

The steroidal 3 beta-oxirane (3S)-spiro[5 alpha-androstane-3,2'-oxiran]-17 beta-ol (1 beta) is an active site directed irreversible inhibitor of the 3-oxo-delta 5-steroid isomerase from Pseudomonas testosteroni. Two steroid-bound peptides (TPS1 and TPS2) were isolated by high-performance liquid chromatography (HPLC) from the trypsin digest of enzyme inactivated with 1 beta. The modified tryptic peptides (residues 14-45 of the enzyme) were further digested with chymotrypsin, each giving rise to a single steroid-containing product (CPS1 and CPS2, respectively) derived from residues 31 to 45 of the enzyme. The modified chymotryptic peptides were isolated by HPLC, and the peptide-steroid ester linkage was reduced with sodium hydroxyborohydride. Amino acid analysis of the reduced peptides gave ca. 0.5 residue of homoserine and one less residue of aspartic acid than the corresponding unreduced peptides. Sequence analysis of both reduced chymotryptic peptides revealed that homoserine was located at position 8 in the peptide sequence, corresponding to residue 38 of the enzyme. The finding that the steroidal 3 beta-oxirane, like the 17 beta-oxiranes, inactivates the isomerase via esterification of aspartic acid-38 is strong evidence that this enzyme binds steroids in at least two orientations.