Alu element-mediated gene silencing

The Alu elements are conserved approximately 300-nucleotide-long repeat sequences that belong to the SINE family of retrotransposons found abundantly in primate genomes. Pairs of inverted Alu repeats in RNA can form duplex structures that lead to hyperediting by the ADAR enzymes, and at least 333 human genes contain such repeats in their 3'-UTRs. Here, we show that a pair of inverted Alus placed within the 3'-UTR of egfp reporter mRNA strongly represses EGFP expression, whereas a single Alu has little or no effect. Importantly, the observed silencing correlates with A-to-I RNA editing, nuclear retention of the mRNA and its association with the protein p54(nrb). Further, we show that inverted Alu elements can act in a similar fashion in their natural chromosomal context to silence the adjoining gene. For example, the Nicolin 1 gene expresses multiple mRNA isoforms differing in the 3'-UTR. One isoform that contains the inverted repeat is retained in the nucleus, whereas another lacking these sequences is exported to the cytoplasm. Taken together, these results support a novel role for Alu elements in human gene regulation.     

A novel and rapid method for isolating sequences adjacent to rare cutting sites and their use in physical mapping.

We describe a simple PCR based technique which can be used to isolate sequences adjacent to rare cutter sites and can subsequently be employed for the construction of long range physical maps. The method involves the ligation of an adaptor to rare cutter sequences and its use as a target for forward priming in PCR. Primers to Alu repeat elements initiate synthesis of the reverse strand. Using this technique any rare cutter site which has a repeat element within amplification range can be cloned. We have isolated six unique sequences around NotI sites from an irradiation reduced hybrid containing a fragment of human chromosome 22 and are using these for physical mapping around the Ewing's sarcoma translocation breakpoint on chromosome 22.     

Isolation and characterization of a human p53 cDNA clone: expression of the human p53 gene.

A cDNA clone for human p53 cellular tumor antigen has been isolated and characterized. This clone contains the complete 3'-untranslated region and most of the open reading frame for the protein. Nucleotide sequence analysis revealed that p53 mRNA contains an Alu repeat in the 3'-untranslated region. Hybridization selection experiments showed this clone was capable of selectively binding p53 mRNA. In vitro translation of SV80 mRNA resulted in the synthesis of two immunoreactive p53 polypeptide species. Northern blot analysis showed that human p53 mRNA was 2.8 kb in length and was present in cell lines containing high and low levels of p53 protein. There appears to be only a single p53 gene in human cells and Southern blot analysis demonstrated no major genomic rearrangements or amplification of the p53 gene in the transformed cell lines examined.     

Rapid isolation of DNA probes within specific chromosome regions by interspersed repetitive sequence polymerase chain reaction

A method was recently developed for the specific amplification of human DNA sequences from interspecific somatic cell hybrids by the polymerase chain reaction (PCR) using primers directed to Alu, a short interspersed repeat element (SINE). We now show human-specific amplification using a primer to the 3' end of the human long interspersed repeat element L1Hs (LINE). A monochromosomal hybrid containing an intact human X chromosome yielded approximately 25 discrete products, ranging in size from 800 to 4500 bp. Combination of a single Alu primer and the L1Hs primer yielded a large number of smaller products (300-1000 bp) distinct from those observed with either primer alone. Inspection of ethidium bromide-stained gels showed one Alu-Alu and three Alu-L1Hs products which were present in an intact X chromosome but absent in a hybrid containing an X chromosome deleted for the single metaphase band q28. These four fragments were isolated from the gel and used as probes on Southern blots which confirmed their localization to Xq28. These results demonstrate that primers can be constructed to a variety of interspersed repetitive sequences (IRS) and used individually or in combination for the rapid isolation of DNA fragments from defined chromosomal regions by IRS-PCR.     

Analysis of repetitive element DNA methylation by MethyLight

Repetitive elements represent a large portion of the human genome and contain much of the CpG methylation found in normal human postnatal somatic tissues. Loss of DNA methylation in these sequences might account for most of the global hypomethylation that characterizes a large percentage of human cancers that have been studied. There is widespread interest in correlating the genomic 5-methylcytosine content with clinical outcome, dietary history, lifestyle, etc. However, a high-throughput, accurate and easily accessible technique that can be applied even to paraffin-embedded tissue DNA is not yet available. Here, we report the development of quantitative MethyLight assays to determine the levels of methylated and unmethylated repeats, namely, Alu and LINE-1 sequences and the centromeric satellite alpha (Satα) and juxtacentromeric satellite 2 (Sat2) DNA sequences. Methylation levels of Alu, Sat2 and LINE-1 repeats were significantly associated with global DNA methylation, as measured by high performance liquid chromatography, and the combined measurements of Alu and Sat2 methylation were highly correlative with global DNA methylation measurements. These MethyLight assays rely only on real-time PCR and provide surrogate markers for global DNA methylation analysis. We also describe a novel design strategy for the development of methylation-independent MethyLight control reactions based on Alu sequences depleted of CpG dinucleotides by evolutionary deamination on one strand. We show that one such Alu-based reaction provides a greatly improved detection of DNA for normalization in MethyLight applications and is less susceptible to normalization errors caused by cancer-associated aneuploidy and copy number changes.     

DNA sequence polymorphisms in Alu repeats

We have developed an efficient method for detection of sequence differences in genomic DNA based on a new principle (M. Orita et al., 1989, Genomics 5: 874-879). Using this method, we show here that approximately half the Alu repeats interspersed in the human genome are significantly polymorphic. Analysis of Alu repeat polymorphism should be useful in construction of a high-resolution map and also in identifying genotypes of individuals for clinical and other purposes because the repeats are ubiquitous and the technique for their detection is simple.     

Cloning and polymerase chain reaction-single-strand conformation polymorphism analysis of anonymous Alu repeats on chromosome 11.

We have shown that many of the Alu repeats found in the GenBank database are polymorphic and that this polymorphism can be detected by a simple technique, single-strand conformation polymorphism (SSCP) analysis, after polymerase chain reaction (PCR) amplification of each repeat from DNA of individuals. Here, we describe a method for collecting many anonymous Alu repeats and their flanks in a chromosome-specific phage library and cloning them into plasmids. The flanking single-copy sequences of each repeat in the plasmid were then determined, and 20mer to 30mer segments of these sequences were used as primers for the PCR-SSCP analysis. Many new polymorphic DNA markers on chromosome 11 were obtained with this method. These markers can also serve as sequence-tagged sites for physical mapping of the genome.     

A trinucleotide repeat-associated increase in the level of Alu RNA-binding protein occurred during the same period as the major Alu amplification that accompanied anthropoid evolution.

Nearly 1 million Alu elements in human DNA were inserted by an RNA-mediated retroposition-amplification process that clearly decelerated about 30 million years ago. Since then, Alu sequences have proliferated at a lower rate, including within the human genome, in which Alu mobility continues to generate genetic variability. Initially derived from 7SL RNA of the signal recognition particle (SRP), Alu became a dominant retroposon while retaining secondary structures found in 7SL RNA. We previously identified a human Alu RNA-binding protein as a homolog of the 14-kDa Alu-specific protein of SRP and have shown that its expression is associated with accumulation of 3'-processed Alu RNA. Here, we show that in early anthropoids, the gene encoding SRP14 Alu RNA-binding protein was duplicated and that SRP14-homologous sequences currently reside on different human chromosomes. In anthropoids, the active SRP14 gene acquired a GCA trinucleotide repeat in its 3'-coding region that produces SRP14 polypeptides with extended C-terminal tails. A C-->G substitution in this region converted the mouse sequence CCA GCA to GCA GCA in prosimians, which presumably predisposed this locus to GCA expansion in anthropoids and provides a model for other triplet expansions. Moreover, the presence of the trinucleotide repeat in SRP14 DNA and the corresponding C-terminal tail in SRP14 are associated with a significant increase in SRP14 polypeptide and Alu RNA-binding activity. These genetic events occurred during the period in which an acceleration in Alu retroposition was followed by a sharp deceleration, suggesting that Alu repeats coevolved with C-terminal variants of SRP14 in higher primates.     

Serial Alu sequence transposition interrupting a human B creatine kinase pseudogene.

We have isolated, sequenced, and characterized a single-copy B creatine kinase pseudogene. The chromosomal assignment of this gene is 16p13 and a unique sequence probe from this locus detects EcoRI restriction fragment length polymorphisms of 7.8 and 5.4 kb. In 26 unrelated individuals, the frequencies for the 7.8- and 5.4-kb B creatine kinase pseudogene alleles were calculated to be 17.3 and 82.7%, respectively. The B creatine kinase pseudogene is interrupted by a 904-bp DNA insertion composed of three Alu repeat sequences in tandem flanked by an 18-bp direct repeat, derived from the pseudogene sequence. Nucleotide sequence analysis of the Alu elements suggests that the Alu sequences were incorporated into this locus in three separate integration events. Several complex clustered Alu repeat sequences without defined integration borders have been previously identified at different genomic loci. This is the first evidence that complex tandem Alu elements can integrate in an apparently serial manner in the human genome and supports the contention that Alu repeats integrate nonrandomly into the human genome.     

Recently integrated human Alu repeats: finding needles in the haystack

Alu elements undergo amplification through retroposition and integration into new locations throughout primate genomes. Over 500,000 Alu elements reside in the human genome, making the identification of newly inserted Alu repeats the genomic equivalent of finding needles in the haystack. Here, we present two complementary methods for rapid detection of newly integrated Alu elements. In the first approach we employ computational biology to mine the human genomic DNA sequence databases in order to identify recently integrated Alu elements. The second method is based on an anchor-PCR technique which we term Allele-Specific Alu PCR (ASAP). In this approach, Alu elements are selectively amplified from anchored DNA generating a display or 'fingerprint' of recently integrated Alu elements. Alu insertion polymorphisms are then detected by comparison of the DNA fingerprints generated from different samples. Here, we explore the utility of these methods by applying them to the identification of members of the smallest previously identified subfamily of Alu repeats in the human genome termed Ya8. This subfamily of Alu repeats is composed of about 50 elements within the human genome. Approximately 50% of the Ya8 Alu family members have inserted in the human genome so recently that they are polymorphic, making them useful markers for the study of human evolution. This revised version was published online in July 2006 with corrections to the Cover Date.     

Interspersed repeated sequences in the African green monkey genome that are homologous to the human Alu family.

The dominant family of interspersed repetitive DNA sequences in the human genome has been termed the Alu family. We have found that more than 75% of the lambda phage in a recombinant library representing an African green monkey genome hybridize with a human Alu sequence under stringent conditions. A group of clones selected from the monkey library with probes other than the Alu sequence were analyzed for the presence and distribution of Alu family sequences. The analyses confirm the abundance of Alu sequences and demonstrate that more than one repeat unit is present in some phages. In the clones studied, the Alu units are separated by an average of 8 kilobase pairs of unrelated sequences. The nucleotide sequence of one monkey Alu sequence is reported and shown to resemble the human Alu sequences closely. Hence, the sequence, dispersion pattern, and copy number of the Alu family members are very similar in the African green monkey and human genomes. Among the clones investigated were two that contain segments of the satellite DNA term alpha-component joined to non alpha-component DNA. The experiments indicate that in the monkey genome Alu sequences can occur close to regions of alpha-component DNA.     

Sequence of an expressed human beta-tubulin gene containing ten Alu family members

The complete sequence of a functionally expressed human beta-tubulin gene (5 beta) is presented. The amino acid sequence encoded by this gene constitutes a distinct isotype, differing from a previously described human beta-tubulin sequence at 21 positions throughout the polypeptide chain. The beta-tubulin coding sequence in 5 beta is interrupted by three intervening sequences of 1014, 117 and 4826 nucleotides. The largest of these contains ten members of the Alu family of middle repetitive sequences. Together, these regions account for sixty percent of this intervening sequence. Two of the Alu elements are juxtaposed head to tail, and share the same flanking direct repeat. The ten Alu sequences are substantially divergent, both from each other and from an Alu consensus sequence, and several contain deletions of up to half the entire sequence.     

Rapid cloning and characterization of new chromosome 10 DNA markers by Alu element-mediated PCR

Alu element-mediated polymerase chain reaction is a strategy for rapidly cloning and mapping human DNA markers from mixed DNA sources. A novel primer homologous to the 3' end of the human Alu repeat element provides the basis for preferential synthesis of human DNA fragments from human/rodent somatic cell hybrid DNA template. This approach has been used to isolate a series of new markers from chromosome 10. The Alu element-mediated PCR probes were regionally assigned on chromosome 10 by hybridization to Southern blots of Alu PCR-synthesized DNA derived from somatic cell hybrid template DNA. Alu element-mediated PCR is generally applicable and makes possible the analysis of complex genomes with a speed and sensitivity that has not been previously possible.     

A high frequency of length polymorphisms in repeated sequences adjacent to Alu sequences

We describe a new class of DNA length polymorphism that is due to a variation in the number of tandem repeats associated with Alu sequences (Alu sequence-related polymorphisms). The polymerase chain reaction was used to selectively amplify a (TTA)n repeat identified in the 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA) reductase gene from genomic DNA of 41 human subjects, and the size of the amplified products was determined by gel electrophoresis. Seven alleles were found that differed in size by integrals of three nucleotides. The allele frequencies ranged from 1.5% to 52%, and the overall heterozygosity index was 62%. The polymorphic TTA repeat was located adjacent to a repetitive sequence of the Alu family. A homology search of human genomic DNA sequences for the trinucleotide TTA (at least five members in length) revealed tandem repeats in six other genes. Three of the six (TTA)n repeats were located adjacent to Alu sequences, and two of the three (in the genes for beta-tubulin and interleukin-1 alpha) were found to be polymorphic in length. Tandemly repetitive sequences found in association with Alu sequences may be frequent sites of length polymorphism that can be used as genetic markers for gene mapping or linkage analysis.