A neutron Laue diffraction study of endothiapepsin: implications for the aspartic proteinase mechanism.

Current proposals for the catalytic mechanism of aspartic proteinases are largely based on X-ray structures of bound oligopeptide inhibitors possessing nonhydrolyzable analogues of the scissile peptide bond. However, the positions of protons on the catalytic aspartates and the ligand in these complexes have not been determined with certainty. Thus, our objective was to locate crucial protons at the active site of an inhibitor complex since this will have major implications for a detailed understanding of the mechanism of action. We have demonstrated that high-resolution neutron diffraction data can be collected from crystals of the fungal aspartic proteinase endothiapepsin bound to a transition state analogue (H261). The neutron structure of the complex has been refined at a resolution of 2.1 A to an R-factor of 23.5% and an R(free) of 27.4%. This work represents the largest protein structure studied to date by neutron crystallography at high resolution. The neutron data demonstrate that 49% of the main chain nitrogens have exchanged their hydrogen atoms with D2O in the mother liquor. The majority of residues resisting exchange are buried within core beta-sheet regions of the molecule. The neutron maps confirm that the protein has a number of buried ionized carboxylate groups which are likely to give the molecule a net negative charge even at very low pH, thereby accounting for its low pI. The functional groups at the catalytic center have clearly undergone H-D exchange despite being buried by the inhibitor occupying the active site cleft. Most importantly, the data provide convincing evidence that Asp 215 is protonated and that Asp 32 is the negatively charged residue in the transition state complex. This has an important bearing on mechanistic proposals for this class of proteinase.     

Five atomic resolution structures of endothiapepsin inhibitor complexes: implications for the aspartic proteinase mechanism

Endothiapepsin is derived from the fungus Endothia parasitica and is a member of the aspartic proteinase class of enzymes. This class of enzyme is comprised of two structurally similar lobes, each lobe contributing an aspartic acid residue to form a catalytic dyad that acts to cleave the substrate peptide bond. The three-dimensional structures of endothiapepsin bound to five transition state analogue inhibitors (H189, H256, CP-80,794, PD-129,541 and PD-130,328) have been solved at atomic resolution allowing full anisotropic modelling of each complex. The active sites of the five structures have been studied with a view to studying the catalytic mechanism of the aspartic proteinases by locating the active site protons by carboxyl bond length differences and electron density analysis. In the CP-80,794 structure there is excellent electron density for the hydrogen on the inhibitory statine hydroxyl group which forms a hydrogen bond with the inner oxygen of Asp32. The location of this proton has implications for the catalytic mechanism of the aspartic proteinases as it is consistent with the proposed mechanism in which Asp32 is the negatively charged aspartate. A number of short hydrogen bonds (approximately 2.6 A) with ESD values of around 0.01 A that may have a role in catalysis have been identified within the active site of each structure; the lengths of these bonds have been confirmed using NMR techniques. The possibility and implications of low barrier hydrogen bonds in the active site are considered.     

Atomic resolution analysis of the catalytic site of an aspartic proteinase and an unexpected mode of binding by short peptides

The X-ray structures of native endothiapepsin and a complex with a hydroxyethylene transition state analog inhibitor (H261) have been determined at atomic resolution. Unrestrained refinement of the carboxyl groups of the enzyme by using the atomic resolution data indicates that both catalytic aspartates in the native enzyme share a single negative charge equally; that is, in the crystal, one half of the active sites have Asp 32 ionized and the other half have Asp 215 ionized. The electron density map of the native enzyme refined at 0.9 A resolution demonstrates that there is a short peptide (probably Ser-Thr) bound noncovalently in the active site cleft. The N-terminal nitrogen of the dipeptide interacts with the aspartate diad of the enzyme by hydrogen bonds involving the carboxyl of Asp 215 and the catalytic water molecule. This is consistent with classical findings that the aspartic proteinases can be inhibited weakly by short peptides and that these enzymes can catalyze transpeptidation reactions. The dipeptide may originate from autolysis of the N-terminal Ser-Thr sequence of the enzyme during crystallization.     

Crystal structure of aspartic proteinase from Irpex lacteus in complex with inhibitor pepstatin

The crystal structure of Irpex lacteus aspartic proteinase (ILAP) in complex with pepstatin (a six amino acid residue peptide-like inhibitor) was determined at 1.3A resolution. ILAP is a pepsin-like enzyme, widely distributed in nature, with high milk-clotting activity relative to proteolytic activity. The overall structure was in good topological agreement with pepsin and other aspartic proteases. The structure and interaction pattern around the catalytic site were conserved, in agreement with the other aspartic proteinase/inhibitor complex structures reported previously. The high-resolution data also supported the transition state model, as proposed previously for the catalytic mechanism of aspartic proteinase. Unlike the other aspartic proteinases, ILAP was found to require hydrophobic residues either in the P(1) or P(1') site, and also in the P(4) and/or P(3) site(s) for secondary interactions. The inhibitor complex structure also revealed the substrate binding mechanism of ILAP at the P(3) and P(4) site of the substrate, where the inserted loop built up the unique hydrophobic pocket at the P(4) site.     

Crystal structures of Aspergillus oryzae aspartic proteinase and its complex with an inhibitor pepstatin at 1.9A resolution

The X-ray structures of Aspergillus oryzae aspartic proteinase (AOAP) and its complex with inhibitor pepstatin have been determined at 1.9A resolution. AOAP was crystallized in an orthorhombic system with the space group P2(1)2(1)2(1) and cell dimensions of a=49.4A, b=79.4A, and c=93.6A. By the soaking of pepstatin, crystals are transformed into a monoclinic system with the space group C2 and cell dimensions of a=106.8A, b=38.6A, c=78.7A, and beta=120.3 degrees. The structures of AOAP and AOAP/pepstatin complex were refined to an R-factor of 0.177 (R(free)=0.213) and of 0.185 (0.221), respectively. AOAP has a crescent-shaped structure with two lobes (N-lobe and C-lobe) and the deep active site cleft is constructed between them. At the center of the active site cleft, two Asp residues (Asp33 and Asp214) form the active dyad with a hydrogen bonding solvent molecule between them. Pepstatin binds to the active site cleft via hydrogen bonds and hydrophobic interactions with the enzyme. The structures of AOAP and AOAP/pepstatin complex including interactions between the enzyme and pepstatin are very similar to those of other structure-solved aspartic proteinases and their complexes with pepstatin. Generally, aspartic proteinases cleave a peptide bond between hydrophobic amino acid residues, but AOAP can also recognize the Lys/Arg residue as well as hydrophobic amino acid residues, leading to the activation of trypsinogen and chymotrypsinogen. The X-ray structure of AOAP/pepstatin complex and preliminary modeling show two possible sites of recognition for the positively charged groups of Lys/Arg residues around the active site of AOAP.     

A structural comparison of 21 inhibitor complexes of the aspartic proteinase from Endothia parasitica.

The aspartic proteinases are an important family of enzymes associated with several pathological conditions such as hypertension (renin), gastric ulcers (pepsin), neoplastic disease (cathepsins D and E), and AIDS (HIV proteinase). Studies of inhibitor binding are therefore of great importance for design of novel inhibitors for potential therapeutic applications. Numerous X-ray analyses have shown that transition-state isostere inhibitors of aspartic proteinases bind in similar extended conformations in the active-site cleft of the target enzyme. Upon comparison of 21 endothiapepsin inhibitor complexes, the hydrogen bond lengths were found to be shortest where the isostere (P1-P'1) interacts with the enzyme's catalytic aspartate pair. Hydrogen bonds with good geometry also occur at P'2, and more so at P3, where a conserved water molecule is involved in the interactions. Weaker interactions also occur at P2, where the side-chain conformations of the inhibitors appear to be more variable than at the more tightly held positions. At P2 and, to a lesser extent, P3, the side-chain conformations depend intriguingly on interactions with spatially adjacent side chains, namely P'1 and P1, respectively. The tight binding at P1-P'1, P3, and P'2 is also reflected in the larger number of van der Waals contacts and the large decreases in solvent-accessible area at these positions, as well as their low temperature factors. Our analysis substantiates earlier proposals for the locations of protons in the transition-state complex. Aspartate 32 is probably ionized in the complexes, its charge being stabilized by 1, or sometimes 2, hydrogen bonds from the transition-state analogues at P1. The detailed comparison also indicates that the P1 and P2 residues of substrate in the ES complex may be strained by the extensive binding interactions at P3, P'1, and P'2 in a manner that would facilitate hydrolysis of the scissile peptide bond.     

Structure of bovine mitochondrial F(1)-ATPase inhibited by Mg(2+) ADP and aluminium fluoride

BACKGROUND: The globular domain of the membrane-associated F(1)F(o)-ATP synthase complex can be detached intact as a water-soluble fragment known as F(1)-ATPase. It consists of five different subunits, alpha, beta, gamma, delta and epsilon, assembled with the stoichiometry 3:3:1:1:1. In the crystal structure of bovine F(1)-ATPase determined previously at 2.8 A resolution, the three catalytic beta subunits and the three noncatalytic alpha subunits are arranged alternately around a central alpha-helical coiled coil in the gamma subunit. In the crystals, the catalytic sites have different nucleotide occupancies. One contains the triphosphate form of the nucleotide, the second contains the diphosphate, and the third is unoccupied. Fluoroaluminate complexes have been shown to mimic the transition state in several ATP and GTP hydrolases. In order to understand more about its catalytic mechanism, F(1)-ATPase was inhibited with Mg(2+)ADP and aluminium fluoride and the structure of the inhibited complex was determined by X-ray crystallography. RESULTS: The structure of bovine F(1)-ATPase inhibited with Mg(2+)ADP and aluminium fluoride determined at 2.5 A resolution differs little from the original structure with bound AMP-PNP and ADP. The nucleotide occupancies of the alpha and beta subunits are unchanged except that both aluminium trifluoride and Mg(2+)ADP are bound in the nucleotide-binding site of the beta(DP) subunit. The presence of aluminium fluoride is accompanied by only minor adjustments in the surrounding protein. CONCLUSIONS: The structure appears to mimic a possible transition state. The coordination of the aluminofluoride group has many features in common with other aluminofluoride-NTP hydrolase complexes. Apparently, once nucleotide is bound to the catalytic beta subunit, no additional major structural changes are required for catalysis to occur.     

New probes of the F1-ATPase catalytic transition state reveal that two of the three catalytic sites can assume a transition state conformation simultaneously

MgADP in combination with fluoroscandium (ScFx) is shown to form a potently inhibitory, tightly bound, noncovalent complex at the catalytic sites of F(1)-ATPase. The F(1).MgADP.ScFx complex mimics a catalytic transition state. Notably, ScFx caused large enhancement of MgADP binding affinity at both catalytic sites 1 and 2, with little effect at site 3. These results indicate that sites 1 and 2 may form a transition state conformation. A new direct optical probe of F(1)-ATPase catalytic transition state conformation is also reported, namely, substantial enhancement of fluorescence emission of residue beta-Trp-148 observed upon binding of MgADP.ScFx or MgIDP. ScFx. Using this fluorescence signal, titrations were performed with MgIDP.ScFx which demonstrated that catalytic sites 1 and 2 can both form a transition state conformation but site 3 cannot. Supporting data were obtained using MgIDP-fluoroaluminate. Current models of the MgATP hydrolysis mechanism uniformly make the assumption that only one catalytic site hydrolyzes MgATP at any one time. The fluorometal analogues demonstrate that two sites have the capability to form the transition state simultaneously.     

Structural insights into the activation and inhibition of histo-aspartic protease from Plasmodium falciparum

Histo-aspartic protease (HAP) from Plasmodium falciparum is a promising target for the development of novel antimalarial drugs. The sequence of HAP is highly similar to those of pepsin-like aspartic proteases, but one of the two catalytic aspartates, Asp32, is replaced with histidine. Crystal structures of the truncated zymogen of HAP and of the complex of the mature enzyme with inhibitor KNI-10395 have been determined at 2.1 and 2.5 ? resolution, respectively. As in other proplasmepsins, the propeptide of the zymogen interacts with the C-terminal domain of the enzyme, forcing the N- and C-terminal domains apart, thereby separating His32 and Asp215 and preventing formation of the mature active site. In the inhibitor complex, the enzyme forms a tight domain-swapped dimer, not previously seen in any aspartic proteases. The inhibitor is found in an unprecedented conformation resembling the letter U, stabilized by two intramolecular hydrogen bonds. Surprisingly, the location and conformation of the inhibitor are similar to those of the fragment of helix 2 comprising residues 34p-38p in the prosegments of the zymogens of gastric aspartic proteases; a corresponding helix assumes a vastly different orientation in proplasmepsins. Each inhibitor molecule is in contact with two molecules of HAP, interacting with the carboxylate group of the catalytic Asp215 of one HAP protomer through a water molecule, while also making a direct hydrogen bond to Glu278A' of the other protomer. A comparison of the shifts in the positions of the catalytic residues in the inhibitor complex presented here with those published previously gives further hints regarding the enzymatic mechanism of HAP.     

How similar are enzyme active site geometries derived from quantum mechanical theozymes to crystal structures of enzyme‐inhibitor complexes? Implications for enzyme design

Quantum mechanical optimizations of theoretical enzymes (theozymes), which are predicted catalytic arrays of biological functionalities stabilizing a transition state, have been carried out for a set of nine diverse enzyme active sites. For each enzyme, the theozyme for the rate-determining transition state plus the catalytic groups modeled by side-chain mimics was optimized using B3LYP/6-31G(d) or, in one case, HF/3-21G(d) quantum mechanical calculations. To determine if the theozyme can reproduce the natural evolutionary catalytic geometry, the positions of optimized catalytic atoms, i.e., covalent, partial covalent, or stabilizing interactions with transition state atoms, are compared to the positions of the atoms in the X-ray crystal structure with a bound inhibitor. These structure comparisons are contrasted to computed substrate-active site structures surrounded by the same theozyme residues. The theozyme/transition structure is shown to predict geometries of active sites with an average RMSD of 0.64 A from the crystal structure, while the RMSD for the bound intermediate complexes are significantly higher at 1.42 A. The implications for computational enzyme design are discussed.     

The crystal structure of Escherichia coli class II fructose-1, 6-bisphosphate aldolase in complex with phosphoglycolohydroxamate reveals details of mechanism and specificity

The structure of a class II fructose-1,6-bisphosphate aldolase in complex with the substrate analogue and inhibitor phosphoglycolohydroxamate (PGH) has been determined using X-ray diffraction terms to a resolution of 2.0 A (1 A=0.1 nm). The crystals are trigonal, space group P3121 with a=b=78.24 A, c=289.69 A. The asymmetric unit is a homodimer of (alpha/beta)8 barrels and the model has refined to give R-work 19.2 %, R-free (based on 5 % of the data) 23.0 %. PGH resembles the ene-diolate transition state of the physiological substrate dihydroxyacetone phosphate. It is well ordered and bound in a deep polar cavity at the C-terminal end of the (alpha/beta)8 barrel, where it chelates the catalytic zinc ion using hydroxyl and enolate oxygen atoms. Trigonal bipyramidal coordination of the zinc ion is completed by three histidine residues. The complex network of hydrogen bonds at the catalytic centre is required to organise the position of key functional groups and metal ion ligands. A well-defined monovalent cation-binding site is observed following significant re-organisation of loop structures. This assists the formation of a phosphate-binding site on one side of the barrel that tethers PGH in the catalytic site. The positions of functional groups of substrate and putative interactions with key amino acid residues are identified. Knowledge of the complex structure complements the results of spectroscopic and site-directed mutagenesis studies, and contributes to our understanding of the mechanism and substrate specificity of this family of enzymes. A reaction mechanism distinct from that proposed for other class II aldolases is discussed. The results suggest that the class II aldolases should be sub-divided into two groups on the basis of both distinct folds and mechanism.     

Stereochemical analysis of peptide bond hydrolysis catalyzed by the aspartic proteinase penicillopepsin

The X-ray crystal structures of native penicillopepsin and of its complex with a synthetic analogue of the inhibitor pepstatin have been refined recently at 1.8-A resolution. These highly refined structures permit a detailed examination of peptide hydrolysis in the aspartic proteinases. Complexes of penicillopepsin with substrate and catalytic intermediates were modeled, by using computer graphics, with minimal perturbation of the observed inhibitor complex. A thallium ion binding experiment shows that the position of solvent molecule O39, between Asp-33(32) and Asp-213(215) in the native structure, is favorable for cations, a fact that places constraints on possible mechanisms. A mechanism for hydrolysis is proposed in which Asp-213(215) acts as an electrophile by protonating the carbonyl oxygen of the substrate, thereby polarizing the carbon-oxygen bond, a water molecule bound to Asp-33(32) (O284 in the native structure) attacks the carbonyl carbon as the nucleophile in a general-base mechanism, the newly pyramidal peptide nitrogen is protonated, either from the solvent after nitrogen inversion or by an internal proton transfer via Asp-213(215) from a hydroxyl of the tetrahedral carbon, and the tetrahedral intermediate breaks down in a manner consistent with the stereoelectronic hypothesis. The models permit the rationalization of observed subsite preferences for substrates and may be useful in predicting subsite preferences of other aspartic proteinases.     

Experimental evidence for a metallohydrolase mechanism in which the nucleophile is not delivered by a metal ion: EPR spectrokinetic and structural studies of aminopeptidase from Vibrio proteolyticus

Metallohydrolases catalyse some of the most important reactions in biology and are targets for numerous chemotherapeutic agents designed to combat bacterial infectivity, antibiotic resistance, HIV infectivity, tumour growth, angiogenesis and immune disorders. Rational design of inhibitors of these enzymes with chemotherapeutic potential relies on detailed knowledge of the catalytic mechanism. The roles of the catalytic transition ions in these enzymes have long been assumed to include the activation and delivery of a nucleophilic hydroxy moiety. In the present study, catalytic intermediates in the hydrolysis of L-leucyl-L-leucyl-L-leucine by Vibrio proteolyticus aminopeptidase were characterized in spectrokinetic and structural studies. Rapid-freeze-quench EPR studies of reaction products of L-leucyl-L-leucyl-L-leucine and Co(II)-substituted aminopeptidase, and comparison of the EPR data with those from structurally characterized complexes of aminopeptidase with inhibitors, indicated the formation of a catalytically competent post-Michaelis pre-transition state intermediate with a structure analogous to that of the inhibited complex with bestatin. The X-ray crystal structure of an aminopeptidase-L-leucyl-L-leucyl-L-leucine complex was also analogous to that of the bestatin complex. In these structures, no water/hydroxy group was observed bound to the essential metal ion. However, a water/hydroxy group was clearly identified that was bound to the metal-ligating oxygen atom of Glu152. This water/hydroxy group is proposed as a candidate for the active nucleophile in a novel metallohydrolase mechanism that shares features of the catalytic mechanisms of aspartic proteases and of B2 metallo-beta-lactamases. Preliminary studies on site-directed variants are consistent with the proposal. Other features of the structure suggest roles for the dinuclear centre in geometrically and electrophilically activating the substrate.     

The 2.0 A structure of human hypoxanthine-guanine phosphoribosyltransferase in complex with a transition-state analog inhibitor.

The structure of human HGPRT bound to the transition-state analog immucillinGP and Mg2+-pyrophosphate has been determined to 2.0 A resolution. ImmucillinGP was designed as a stable analog with the stereoelectronic features of the transition state. Bound inhibitor at the catalytic site indicates that the oxocarbenium ion of the transition state is stabilized by neighboring-group participation from MgPPi and O5'. A short hydrogen bond forms between Asp 137 and the purine ring analog. Two Mg2+ ions sandwich the pyrophosphate and contact both hydroxyls of the ribosyl analog. The transition-state analog is shielded from bulk solvent by a catalytic loop that moves approximately 25 A to cover the active site and becomes an ordered antiparallel beta-sheet.     

Complexes of glucoamylase with maltoside heteroanalogues: bound ligand conformations by use of transferred NOE experiments and molecular modeling

Transferred nuclear Overhauser effect (trNOE) experiments have been performed to investigate the conformations of the competitive inhibitors, methyl 5'-thio-4-N-alpha-maltoside 3a and methyl 5'-thio-4-S-alpha-maltoside 4 when bound to the catalytic subunit of the enzyme glucoamylase. These NMR data suggest that, although each of the free ligands populates two conformational families, both heteroanalogues are bound by the enzyme in conformations in the area of the global energy minimum. These conformations have been used as initial points for docking into the active site of the enzyme taken from a X-ray crystal structure of the related glucoamylase-D-gluco-dihydroacarbose 2 complex. Minimization of the resulting complexes has yielded structures for the bound complexes. Corroboration of the structures is provided by fast T(1)(rho)-relaxation effects for certain ligand protons as a result of close contacts with protons in the enzyme active site. The results auger well for the combined use of transferred NOE spectroscopy and molecular modeling based on X-ray crystal structures of complexes of suitable congeners for the rapid analysis of ligand-receptor interactions.     

Prodomain processing of Asp1 (BACE2) is autocatalytic

Generation of the amyloid peptide through proteolytic processing of the amyloid precursor protein by beta- and gamma-secretases is central to the etiology of Alzheimer's disease. The highly elusive beta-secretase was recently identified as a transmembrane aspartic proteinase, Asp2 (BACE). The Asp2 homolog Asp1 (BACE2/DRAP) has also been reported to exhibit beta-secretase cleavage of amyloid precursor protein. Most aspartic proteinases are generated as inactive proenzymes, requiring removal of the prodomain to generate active proteinase. Here we show that prodomain processing of Asp1 occurs between Leu(62) and Ala(63) and is autocatalytic. Asp1 cleaved a maltose-binding protein-Asp1 prodomain fusion protein and a synthetic peptide at this site. Mutation of one of the conserved catalytic aspartic acid residues in the active site of Asp1 to asparagine (D110N) abolished this cleavage. Mutation of P(1)' and P(2)' residues in the substrate to phenylalanine reduced cleavage at this site. Asp1 expressed in cells was the mature form, and prodomain processing occurred intramolecularly within the endoplasmic reticulum/early Golgi. Interestingly, a proportion of mature Asp1 was expressed on the cell surface. When full-length Asp1(D110N) was expressed in COS-7 cells, it was not processed, suggesting that no other proteinase can activate Asp1 in these cells.     

Crystal structure of the lytic transglycosylase from bacteriophage lambda in complex with hexa-N-acetylchitohexaose

The three-dimensional structure of the lytic transglycosylase from bacteriophage lambda, also known as bacteriophage lambda lysozyme, complexed to the hexasaccharide inhibitor, hexa-N-acetylchitohexaose, has been determined by X-ray crystallography at 2.6 A resolution. The unit cell contains two molecules of the lytic transglycosylase with two hexasaccharides bound. Each enzyme molecule is found to interact with four N-acetylglucosamine units from one hexasaccharide (subsites A-D) and two N-acetylglucosamine units from the second hexasaccharide (subsites E and F), resulting in all six subsites of the active site of this enzyme being filled. This crystallographic structure, therefore, represents the first example of a lysozyme in which all subsites are occupied, and detailed protein-oligosaccharide interactions are now available for this bacteriophage lytic transglycosylase. Examination of the active site furthermore reveals that of the two residues that have been implicated in the reaction mechanism of most other c-type lysozymes (Glu35 and Asp52 in hen egg white lysozyme), only a homologous Glu residue is present. The lambda lytic transglycosylase is therefore functionally closely related to the Escherichia coli Slt70 and Slt35 lytic transglycosylases and goose egg white lysozyme which also lack the catalytic aspartic acid.     

Direct observation by X-ray analysis of the tetrahedral "intermediate" of aspartic proteinases.

We report the X-ray analysis at 2.0 A resolution for crystals of the aspartic proteinase endothiapepsin (EC 3.4.23.6) complexed with a potent difluorostatone-containing tripeptide renin inhibitor (CP-81,282). The scissile bond surrogate, an electrophilic ketone, is hydrated in the complex. The pro-(R) (statine-like) hydroxyl of the tetrahedral carbonyl hydrate is hydrogen-bonded to both active-site aspartates 32 and 215 in the position occupied by a water in the native enzyme. The second hydroxyl oxygen of the hydrate is hydrogen-bonded only to the outer oxygen of Asp 32. These experimental data provide a basis for a model of the tetrahedral intermediate in aspartic proteinase-mediated cleavage of the amide bond. This indicates a mechanism in which Asp 32 is the proton donor and Asp 215 carboxylate polarizes a bound water for nucleophilic attack. The mechanism involves a carboxylate (Asp 32) that is stabilized by extensive hydrogen bonding, rather than an oxyanion derivative of the peptide as in serine proteinase catalysis.     

Shewasin A, an active pepsin homolog from the bacterium Shewanella amazonensis

The view has been widely held that pepsin-like aspartic proteinases are found only in eukaryotes, and not in bacteria. However, a recent bioinformatics search [Rawlings ND & Bateman A (2009) BMC Genomics10, 437] revealed that, in seven of ～ 1000 completely sequenced bacterial genomes, genes were present encoding polypeptides that displayed the requisite hallmark sequence motifs of pepsin-like aspartic proteinases. The implications of this theoretical observation prompted us to generate biochemical data to validate this finding experimentally. The aspartic proteinase gene from one of the seven identified bacterial species, Shewanella amazonensis, was expressed in Escherichia coli. The recombinant protein, termed shewasin A, was produced in soluble form, purified to homogeneity, and shown to display properties remarkably similar to those of pepsin-like aspartic proteinases. Shewasin A was maximally active at acidic pH values, cleaving a substrate that has been widely used for assessment of the proteolytic activity of other aspartic proteinases, and displayed a clear preference for cleaving peptide bonds between hydrophobic residues in the P1*P1' positions of the substrate. It was completely inhibited by the general inhibitor of aspartic proteinases, pepstatin, and mutation of one of the catalytic Asp residues (in the Asp-Thr-Gly motif of the N-terminal domain) resulted in complete loss of enzymatic activity. It can thus be concluded unequivocally that this Shewanella gene encodes an active pepsin-like aspartic proteinase. It is now beyond doubt that pepsin-like aspartic proteinases are not confined to eukaryotes, but are encoded within some species of bacteria. The distinctions between the bacterial and eukaryotic polypeptides are discussed and their evolutionary relationships are outlined.     

Crystallographic analysis of transition state mimics bound to penicillopepsin: difluorostatine- and difluorostatone-containing peptides.

Difluorostatine- and difluorostatone-containing peptides have been evaluated as potent inhibitors of penicillopepsin, a member of the aspartic proteinase family of enzymes. Isovaleryl-Val-Val-StaF2NHCH3 [StaF2 = (S)-4-amino-2,2-difluoro-(R)-3-hydroxy-6-methylheptanoic acid] and isovaleryl-Val-Val-StoF2NHCH3 [StoF2 = (S)-4-amino-2,2-difluoro-3-oxo-6-methylheptanoic acid] have measured Ki's of 10 x 10(-9) and 1 x 10(-9) M, respectively, with this fungal proteinase. The StoF2-containing peptide binds 32-fold more tightly to the enzyme than the analogous peptide containing the non-fluorinated statine ethyl ester. Each compound was cocrystallized with penicillopepsin, intensity data were collected to 1.8-A resolution, and the atomic coordinates were refined to an R factor [formula: see text] of 0.131 for both complexes. The inhibitors bind in the active site of penicillopepsin in much the same fashion as do other statine-containing inhibitors of penicillopepsin analyzed earlier [James, M. N. G., Sielecki, A. Salituro, F., Rich, D. H., & Hofmann, T. (1982) Proc. Natl. Acad. Sci. U.S.A. 79, 6137-6141; James, M.N.G., Sielecki, A., & Hofmann, T. (1985) in Aspartic Proteinases and their Inhibitors (Kosta, V., Ed.) pp 163-177, Walter deGruyter, Berlin]. The (R)-3-hydroxyl group in StaF2 binds between the active site carboxyl groups of Asp33 and Asp213, making hydrogen-bonding contacts to each one. The ketone functional group of the StoF2 inhibitor is bound as a hydrated species, with the gem-diol situated between the two aspartic acid carboxyl groups in a manner similar to that predicted for the tetrahedral intermediate expected during the catalytic hydrolysis of a peptide bond [James, M. N. G., & Sielecki, A. (1985) Biochemistry 24, 3701-3713]. One hydrogen-bonding interaction from the "outer" hydroxyl group is made to O delta 1 of Asp33, and the "inner" hydroxyl group forms two hydrogen-bonding contacts, one to each of the carboxyl groups of Asp33 (O delta 2) and Asp213 (O delta 2). The only structural difference between the StaF2 and StoF2 inhibitors that accounts for the factor of 10 in their Ki's is the additional (R)-3-OH group on the tetrahedral sp3 carbon atom of the hydrated StoF2 inhibitor. The intermolecular interactions involving the fluorine atoms of each inhibitor are normal van der Waals contacts to one of the carboxyl oxygen atoms of Asp213 (F2-O delta 2 Asp213, 2.9 A). The observed stereochemistry of the bound StoF2 group in the active site of penicillopepsin has stimulated our reappraisal of the catalytic pathway for the aspartic proteinases.(ABSTRACT TRUNCATED AT 400 WORDS)