Effect of signal peptide changes on the extracellular processing of streptokinase from Escherichia coli : requirement for secondary structure at the cleavage junction

Streptokinase (SK), an extracellular protein from Streptococcus equisimilis, is secreted post-translationally by Escherichia coli using both its native and E. coli-derived transport signals. In this communication we report that cleavage specificity of signal peptidase I, and thus efficiency of secretion, varies in E. coli when SK export is directed by different transport signals. The native (+1) N-terminus of mature SK was retained when it was transported under the control of its own, PelB or LamB signal peptide. However, when translocation of SK was controlled by the OmpA or MalE signal peptide, Ala2 of mature SK was preferred as a cleavage site for the pre-SK processing. Our results indicate that compatibility of the leader peptide with the mature sequences of SK, which fulfils the requirement for a given secondary structure within the cleavage region, is essential for maintaining the correct processing of pre-SK. An OmpA-SK fusion, which results in the deletion of two N-terminal amino acid residues of mature SK, was further studied with respect to the recognition of alternative cleavage site in E. coli. The alanine at +2 in mature SK was changed to glycine or its relative position was changed to +3 by introducing a methionine residue at the +1 position. Both alterations resulted in the correct cleavage of pre-SK at the original OmpA fusion site. In contrast, introduction of an additional alanine at +4, creating three probable cleavage sites (Ala-x-Ala-x-Ala-x-Ala), resulted in the recognition of all three target sites for cleavage, with varying efficiency. The results indicate that the nature of the secondary structure generated at the cleavage junction of pre-SK, resulting from the fusion of different signal peptides, modulates the cleavage specificity of signal peptidase I during extracellular processing of SK. Based on these findings it is proposed that flexibility in the interaction of the active site of signal peptidase I with the cleavage sites of signal peptides may occur when it encounters two or more juxtaposed cleavage sites. Preference for one cleavage site over another, then, may depend on fulfillment of secondary structure requirements in the vicinity of the pre-protein cleavage junction. Received: 22 September 1997 / Accepted: 17 December 1997     

Structural requirement at the cleavage site for efficient processing of the lipoprotein secretory precursor of Escherichia coli

A phenotypically silent mutation in the signal peptide of the Escherichia coli outer membrane prolipoprotein was combined with other mutations in the mature lipoprotein structure. Under conditions where the individual mutations permit normal lipoprotein secretion, the prolipoprotein with both mutations was unable to be normally modified or processed. These results demonstrate that a given signal peptide is fully functional only if it is structurally compatible with the protein to be secreted. This structural compatibility between the signal peptide and the secretory protein is considered to be dependent on the secondary structure formed at or near the signal peptide cleavage site.     

Effect of amino acid substitutions at the signal peptide cleavage site of the Escherichia coli major outer membrane lipoprotein

The requirement for the glycine residue at the COOH terminus of the signal peptide of the precursor of the major Escherichia coli outer membrane lipoprotein was examined. Using oligonucleotide-directed site-specific mutagenesis, this residue was replaced by residues of increasing side chain size. Substitution by serine had no effect on the modification or processing of the prolipoprotein. Substitution by valine or leucine resulted in the accumulation of the unmodified precursor, whereas threonine substitution resulted in slow lipid modification and no detectable processing of the lipid modified precursor. The results indicate that serine is the upper limit on size for the residue at the cleavage site. Larger residues at this position prevent the action of both the glyceride transferase and signal peptidase II enzymes, indicating that the cleavage site residue plays a role in events prior to proteolytic cleavage. The upper limit on size of the cleavage site residue is similar to that found for exported proteins cleaved by signal peptidase I, as well as eucaryotic exported proteins. The possibility that the cleavage site residue may have a role other than active site recognition by the signal peptidase is discussed.     

An alternate pathway for the processing of the prolipoprotein signal peptide in Escherichia coli

Previous studies showed that when the signal sequence plus 9 amino acid residues from the amino terminus of the major lipoprotein of Escherichia coli was fused to beta-lactamase, the resulting hybrid protein was modified, proteolytically processed, and assembled into the outer membrane as was the wild-type lipoprotein (Ghrayeb, J., and Inouye, M. (1983) J. Biol. Chem. 259, 463-467). We have constructed several hybrid proteins with mutations at the cleavage site of the prolipoprotein signal peptide. These mutations are known to block the lipid modification of the lipoprotein at the cysteine residue, resulting in the accumulation of unprocessed, unmodified prolipoprotein in the outer membrane. The mutations blocked the lipid modification of the hybrid protein. However, in contrast to the mutant lipoproteins, the cleavage of the signal peptides for the mutant hybrid proteins did occur, although less efficiently than the unaltered prolipo-beta-lactamase. The mutant prolipo-beta-lactamase proteins were cleaved at a site 5 amino acid residues downstream of the prolipoprotein signal peptide cleavage site. This new cleavage between alanine and lysine residues was resistant to globomycin, a specific inhibitor for signal peptidase II. This indicates that signal peptidase II, the signal peptidase which cleaves the unaltered prolipo-beta-lactamase, is not responsible for the new cleavage. The results demonstrate that the cleavage of the signal peptide is a flexible process that can occur by an alternative pathway when the normal processing pathway is blocked.     

Escherichia coli hemolysin is released extracellularly without cleavage of a signal peptide.

A 110-kilodalton polypeptide isolated from cell-free culture supernatants of hemolytic Escherichia coli was shown to be associated with hemolytic activity. The relative amount of the extracellular 110-kilodalton species detected directly reflects the extracellular hemolysin activity associated with Escherichia coli strains harboring different hemolysin recombinant plasmids. The predicted molecular mass of the hemolysin structural gene (hlyA) based on DNA sequence analysis was 109,858 daltons. Amino-terminal amino acid sequence analysis of the 110-kilodalton polypeptide provided direct evidence that it was encoded by hlyA. Based on this information, it was also demonstrated that the HlyA polypeptide was released extracellularly without signal peptidase-like cleavage. An examination of hemolysin-specific polypeptides detected by use of recombinant plasmids in a minicell-producing strain of Escherichia coli was performed. These studies demonstrated how hemolysin-associated 110- and 58-kilodalton polypeptides detected in the minicell background could be misinterpreted as a precursor-product relationship.     

Effects of signal peptide changes on the secretion of bovine somatotropin (bST) from Escherichia coli.

Bovine somatotropin (bST) was secreted from Escherichia coli at moderate levels of 1-2 micrograms/ml/OD using expression vectors in which the bST gene was fused to the lamB secretion signal. To study the secretion properties of bST in E.coli further, two approaches for modifying the secretion signal were employed. In the first case, fusion proteins were constructed with six alternative bacterial secretion signals: three from E.coli proteins (HisJ, MalE and OmpA), two from bacteriophage proteins (M13 coat protein and PA-2 Lc) and one from the chitinase A protein of Serratia marcescens. The results, as monitored by Western blot analysis of both total cell protein and the periplasmic fraction, showed that these changes in the secretion signal did not significantly affect the secretion properties of bST. In the second approach, a library of random mutations was created in the lamB secretion signal and 200 independent clones were screened. The level of secreted bST was determined by growing individual clones in duplicate in microtiter wells, inducing protein expression and measuring the bST released by osmotic shock using a particle concentration fluorescent immunoassay. The secretion properties of several novel variants in the LamB signal peptide are presented.     

Prolipoprotein signal peptidase of Escherichia coli requires a cysteine residue at the cleavage site

A signal peptidase specifically required for the secretion of the lipoprotein of the Escherichia coli outer membrane cleaves off the signal peptide at the bond between a glycine and a cysteine residue. This cysteine residue was altered to a glycine residue by guided site-specific mutagenesis using a synthetic oligonucleotide and a plasmid carrying an inducible lipoprotein gene. The induction of mutant lipoprotein production was lethal to the cells. A large amount of the prolipoprotein was accumulated in the outer membrane fraction. No protein of the size of the mature lipoprotein was detected. These results indicate that the prolipoprotein signal peptidase requires a glyceride modified cysteine residue at the cleavage site.     

Pressure-induced changes in the secondary structure of the Escherichia coli methionine repressor protein

The effect of hydrostatic pressure on the conformational properties of the E. coli methionine repressor protein in aqueous solution was investigated by infrared spectroscopy. Changes in hydrostatic pressure produce dramatic changes in the spectral region of the conformation-sensitive amide I band. As the pressure is raised up to 18 kbar, the protein undergoes a rearrangement of alpha-helical segments into beta-type structures; after the pressure is released the beta-strands reconvert into less ordered alpha-helical or random segments.     

Mechanism of signal peptide cleavage in the biosynthesis of the major lipoprotein of the Escherichia coli outer membrane

On treatment of Escherichia coli cells with globomycin, a glyceride-containing precursor of the major outer membrane lipoprotein accumulates in the cytoplasmic membrane (Hussain, M., Ichihara, S., and Mizushima, S. (1980) J. Biol. Chem. 255, 3707-3712). When the envelope fraction from such cells was incubated in a suitable buffer, this precursor could be processed to the mature lipoprotein. The processing involved removal of the signal peptide and subsequent acylation of the NH2 terminus thus bared. Two types of peptidase and an acylation enzyme(s) were found to be involved in these processes. The enzyme that cleaves the signal peptide, called signal peptidase in this paper, had many unique properties: being highly resistant to high temperature, having a wide optimum pH range, and being highly sensitive to detergents. The other peptidase(s), called signal peptide peptidase in this paper, was assumed to be responsible for the digestion of the signal peptide that had been cleaved from the precursor lipoprotein. This enzyme was rather heat-sensitive. Thus the processing from the precursor to the mature lipoprotein at a high temperature resulted in accumulation of a peptide that was most probably the intact signal peptide. The third enzyme(s) involved in the processing was the one that is responsible for acylation of the newly bared NH2 terminus of the lipoprotein. The enzyme activity was also lost at 80 degrees C. In the light of these findings, the biosynthetic pathway of the lipoprotein is discussed.     

Preliminary identification of the secondary structure of the trp repressor from Escherichia coli

The probable secondary structure content of the trp repressor from Escherichia coli has been inferred from NMR and circular dichroic measurements; the results are compared with those of prediction algorithms. 70% of the amide protons have exchange rate constants orders of magnitude smaller than the intrinsic rate constants, identifying them as participating in hydrogen bonds. The exchange rate constants fall into two distinct classes, one having half-lives of 20 min and the other more than 24 h. The latter class, consisting of 50% of all amide protons, indicates a stable core. The exchange data are consistent with circular dichroism and predictions that suggest that about 55% of the peptides from alpha helix, and 20% form beta sheets and turns. The NMR spectrum further indicates that there is little beta sheet, suggesting that the secondary structure class is alpha.     

The periplasmic nitrate reductase from Escherichia coli: a heterodimeric molybdoprotein with a double-arginine signal sequence and an unusual leader peptide cleavage site

The periplasmic nitrate reductase, NapA, from Escherichia coli was identified as a 90 kDa molybdoprotein which comigrated during polyacrylamide gel electrophoresis with the di-haem c-type cytochrome, NapB. The DNA sequence of the 5' end of the napA gene and the N-terminal amino acid sequences of both NapA and NapB were determined. The 36 residue leader peptide for NapA includes the double-arginine motif typical of proteins to which complex redox cofactors are attached in the cytoplasm prior to targeting to the periplasm. The pre-NapA leader sequence is both unexpectedly long and, unless two successive proteolysis steps are involved, is cleaved at the unprecedented sequence G-Q-Q-. Nap activity was suppressed during growth in the presence of tungstate and was absent from a mutant unable to synthesise the molybdopterin cofactor.     

Two precursors of the heat-stable enterotoxin of Escherichia coli: evidence of extracellular processing

Expression of the gene of the methanol-soluble, heat-stable enterotoxin of Escherichia coli (STA) allowed the identification by SDS-PAGE of a cell-associated 7500 Dalton STA-related peptide; when similar experiments were performed with a phosphate buffer SDS-PAGE system, an additional Mr 9800 band became apparent. The 9800 Dalton form, pre-pro-STA, accumulated as an intracellular species when the experiments were performed in the presence of the proton ionophore CCCP (carbonylcyanide m-chlorophenylhydrazone); by pulse-chase experiments, it was shown that pre-pro-STA became a periplasmic Mr 7500 pro-STA and this form was chased to the culture supernatant; periplasmic and extracellular pro-STA showed the same electrophoretic mobility. A short time after the pulse, pro-STA was converted extracellularly to mature STA (Mr 4500). It is proposed that STA is synthesized as pre-pro-STA, a 72-amino-acid peptide that is subsequently cleaved between amino acids 19 and 20 as it is translocated across the inner membrane. The resulting 53-amino-acid pro-STA is first detected in the periplasm and is then secreted to the culture supernatant. Pro-STA is cleaved extracellularly to yield mature STA (Mr 4500).     

Crystal structure of the Escherichia coli peptide methionine sulphoxide reductase at 1.9 A resolution

BACKGROUND: Peptide methionine sulphoxide reductases catalyze the reduction of oxidized methionine residues in proteins. They are implicated in the defense of organisms against oxidative stress and in the regulation of processes involving peptide methionine oxidation/reduction. These enzymes are found in numerous organisms, from bacteria to mammals and plants. Their primary structure shows no significant similarity to any other known protein. RESULTS: The X-ray structure of the peptide methionine sulphoxide reductase from Escherichia coli was determined at 3 A resolution by the multiple wavelength anomalous dispersion method for the selenomethionine-substituted enzyme, and it was refined to 1.9 A resolution for the native enzyme. The 23 kDa protein is folded into an alpha/beta roll and contains a large proportion of coils. Among the three cysteine residues involved in the catalytic mechanism, Cys-51 is positioned at the N terminus of an alpha helix, in a solvent-exposed area composed of highly conserved amino acids. The two others, Cys-198 and Cys-206, are located in the C-terminal coil. CONCLUSIONS: Sequence alignments show that the overall fold of the peptide methionine sulphoxide reductase from E. coli is likely to be conserved in many species. The characteristics observed in the Cys-51 environment are in agreement with the expected accessibility of the active site of an enzyme that reduces methionine sulphoxides in various proteins. Cys-51 could be activated by the influence of an alpha helix dipole. The involvement of the two other cysteine residues in the catalytic mechanism requires a movement of the C-terminal coil. Several conserved amino acids and water molecules are discussed as potential participants in the reaction.     

Unusual signal peptide directs penicillin amidase from Escherichia coli to the Tat translocation machinery

The recently described Tat protein translocation system in Escherichia coli recognizes its protein substrates by the consensus twin arginine (SRRXFLK) motif in the signal peptide. The signal sequence of E. coli pre-pro-penicillin amidase bears two arginine residues separated by one aspargine and does not resemble the Tat-targeting motif but can nevertheless target the precursor to the Tat pathway. Mutational studies have shown that the hydrophobic core region acts in synergism with the positive charged N-terminal part of the signal peptide as a Tat recognition signal and contributes to the efficient Tat targeting of the pre-pro-penicillin amidase.     

Penetration of the signal sequence of Escherichia coli PhoE protein into phospholipid model membranes leads to lipid-specific changes in signal peptide structure and alterations of lipid organization

In order to obtain more insight in the initial steps of the process of protein translocation across membranes, biophysical investigations were undertaken on the lipid specificity and structural consequences of penetration of the PhoE signal peptide into lipid model membranes and on the conformation of the signal peptide adopted upon interaction with the lipids. When the monolayer technique and differential scanning calorimetry are used, a stronger penetration is observed for negatively charged lipids, significantly influenced by the physical state of the lipid but not by temperature or acyl chain unsaturation as such. Although the interaction is principally electrostatic, as indicated also by the strong penetration of N-terminal fragments into negatively charged lipid monolayers, the effect of ionic strength suggests an additional hydrophobic component. Most interestingly with regard to the mechanism of protein translocation, the molecular area of the peptide in the monolayer also shows lipid specificity: the area in the presence of PC is consistent with a looped helical orientation, whereas in the presence of cardiolipin a time-dependent conformational change is observed, most likely leading from a looped to a stretched orientation with the N-terminus directed toward the water. This is in line also with the determined peptide-lipid stoichiometry. Preliminary 31P NMR and electron microscopy data on the interaction with lipid bilayer systems indicate loss of bilayer structure.     

An experimentally-derived model for the secondary structure of the 16S ribosomal RNA from Escherichia coli

Ribonucleoprotein fragments are isolated by mild ribonuclease digestion of E. coli 30S ribosomal subunits, and are deproteinized and subjected to a second partial digestion. Base-pairing between the resulting small RNA fragments is investigated using the two-dimensional gel electrophoresis procedure already reported (see Ref. 1). The interactions thus found are incorporated into a secondary structure model covering approximately 80% of the 16S RNA.     

Crystal structure of the gamma-glutamyltranspeptidase precursor protein from Escherichia coli. Structural changes upon autocatalytic processing and implications for the maturation mechanism

Gamma-glutamyltranspeptidase (GGT) is an extracellular enzyme that plays a key role in glutathione metabolism. The mature GGT is a heterodimer consisting of L- and S-subunits that is generated by posttranslational cleavage of the peptide bond between Gln-390 and Thr-391 in the precursor protein. Thr-391, which becomes the N-terminal residue of the S-subunit, acts as the active residue in the catalytic reaction. The crystal structure of a mutant GGT, T391A, that is unable to undergo autocatalytic processing, has been determined at 2.55-A resolution. Structural comparison of the precursor protein and mature GGT demonstrates that the structures of the core regions in the two proteins are unchanged, but marked differences are found near the active site. In particular, in the precursor, the segment corresponding to the C-terminal region of the L-subunit occupies the site where the loop (residues 438-449) forms the lid of the gamma-glutamyl group-binding pocket in the mature GGT. This result demonstrates that, upon cleavage of the N-terminal peptide bond of Thr-391, the newly produced C terminus (residues 375-390) flips out, allowing the 438-449 segment to form the gamma-glutamyl group-binding pocket. The electron density map for the T391A protein also identified a water molecule near the carbonyl carbon atom of Gln-390. The spatial arrangement around the water and Thr-391 relative to the scissile peptide bond appears suitable for the initiation of autocatalytic processing, as in other members of the N-terminal nucleophile hydrolase superfamily.     

Characterization of the cleavage of signal peptide at the C-terminus of hepatitis C virus core protein by signal peptide peptidase

Production of hepatitis C virus (HCV) core protein requires the cleavages of polyprotein by signal peptidase and signal peptide peptidase (SPP). Cleavage of signal peptide at the C-terminus of HCV core protein by SPP was characterized in this study. The spko mutant (mutate a.a. 189–193 from ASAYQ to PPFPF) is more efficient than the A/F mutant (mutate a.a 189 and 191 from A to F) in blocking the cleavage of signal peptide by signal peptidase. The cleavage efficiency of SPP is inversely proportional to the length of C-terminal extension of the signal peptide: the longer the extension, the less efficiency the cleavage is. Thus, reducing the length of C-terminal extension of signal peptide by signal peptidase cleavage could facilitate further cleavage by SPP. The recombinant core protein fused with signal peptide from the C-terminus of p7 protein, but not those from the C-termini of E1 and E2, could be cleaved by SPP. Therefore, the sequence of the signal peptide is important but not the sole determinant for its cleavage by SPP. Replacement of the HCV core protein E.R.-associated domain (a.a. 120–150) with the E.R.-associated domain (a.a.1–50) of SARS-CoV membrane protein results in the failure of cleavage of this recombinant protein by SPP, though this protein still is E.R.-associated. This result suggests that not only E.R.-association but also specific protein sequence is important for the HCV core protein signal peptide cleavage by SPP. Thus, our results suggest that both sequences of the signal peptide and the E.R.-associated domain are important for the signal peptide cleavage of HCV core protein by SPP. Electronic Supplementary MaterialThe online version of this article (doi: ) contains supplementary material, which is available to authorized users.