Lignin esters for use in unsaturated thermosets: lignin modification and solubility modeling

Kraft lignins from hardwood and softwood were esterified with several anhydrides to alter their solubility behavior in nonpolar solvents, such as styrene-containing thermoset resins. The esterification reaction was facile, it reduced the amount of waste products, and can be readily scaled up. Increasing the carbon chain length on the ester group improved the solubility of kraft lignin in nonpolar solvents, with butyrated lignin being completely soluble in styrene. Esterification with unsaturated groups such as methacrylic anhydride, improved the solubility to a lesser extent than the saturated analogues. The solubility behavior of the modified lignin was described using the Flory-Huggins solubility theory, combined with the predictive method of Hoy. The main goal to obtain a styrene soluble kraft lignin that could be used in unsaturated polyesters and vinyl esters was achieved with fully butyrated kraft lignin and a butyrated/methacrylated kraft lignin. The solubility of the latter is governed by the butyrate/methacrylate ratio. The reaction rate constants for the butyration and methacrylation reactions were also determined and the aromatic hydroxyl groups were found to be consistently three times more reactive than the aliphatic ones.     

Use of lipases in the resolution of racemic ibuprofen

Summary Resolution of (R,S)-ibuprofen enantiomers by esterification in different organic solvents was studied using Candida cylindracea lipase. This enzyme preparation had high enantiospecificity for S(+)-ibuprofen in the esterification reaction of a racemic ibuprofen with primary alcohols. The esterification yields of secondary alcohols were much lower than those of primary alcohols. Esterification with tertiary alcohols was not observed. The synthesis of esters was profoundly affected by the amount of water in the reaction mixture. C. cylindracea lipase was active only in very hydrophobic solvents. The esterification activity of the lipase was reduced significantly by addition of water. The R- and S-enantiomers of ibuprofen were determined without derivatization by HPLC using a chiral column.     

Lipase-catalyzed esterification of hydrophilic diols in organic solvents

Summary The direct, lipase-catalyzed esterification of hydrophilic diols in organic solvents was achieved by first adsorbing the hydrophilic, solvent immiscible substrate onto a solid support with high internal surface, namely silica gel and reacting the solid mixture with fatty acid vinyl esters in an appropriate organic solvent and in presence of an immobilized lipase fromMucor miehei (Lipozyme). Quantitative conversions of the acyl donors and very high reaction rates were observed in these transformations. Furthermore, mono- or diesters of these diols could be selectively produced by this method.     

Effect of fatty acid chain length on initial reaction rates and regioselectivity of lipase-catalysed esterification of disaccharides

In a reaction medium mixture of 9:11 t-BuOH and pyridine (v/v) the effect of fatty acid chain length (C-4-C-12) on C. antarctica lipase B (Novozym 435, EC 3.1.1.3) catalysed esterification was studied. alpha and beta maltose 6'-O-acyl esters in an anomeric molar ratio of 1.0:1.1 were synthesised independently of the chain length, but the initial specific reaction rate increased with decreasing chain length of the acyl donor. The product yield followed the same trend with a lauryl ester yield of 1.1% (mol/mol) and a butyl ester yield of 27.6% (mol/mol) after 24 h of reaction. With sucrose as the acyl acceptor the 6'-O-acyl and 6-O-acyl monoesters were formed with fatty acids of chain length C-4 and C-10 while the 6',6-O-acyl diester was formed only with butanoic acid (C-4:0) as acyl donor. The 6'-O-acyl and 6-O-acyl monoesters and the 6',6-O-acyl diester of butanoic acid were produced in a molar ratio of 1.0:0.5:0.2 and with decanoic acid (C-10:0) the 6'-O-acyl and 6-O-acyl monoesters were formed in the ratio of 1.0:0.3. The highest initial reaction rate and yield were obtained with the shortest chain length of the acyl donor. Initial reaction rates and ester yields were affected by the solubility of the disaccharide, with higher reaction rates and yields with maltose than with sucrose, while no formation of esters were observed with either cellobiose or lactose as acyl acceptors.     

An esterase on the outer membrane of Pseudomonas aeruginosa for the hydrolysis of long chain acyl esters.

A new esterase activity which hydrolyzes palmitoyl-CoA was found in the membrane fraction of Pseudomonas aeruginosa. All the 11 strains of P. aeruginosa tested possessed this esterase activity. The esterase was constitutive and was fully active on the intact cell bodies toward substrates in the medium. It was located on the outer membrane of the cell envelope, and was not released into the culture medium. This activity was designated as OM (outer membrane) esterase. OM esterase was solubilized from the cell envelope with EDTA-Triton X-100 and purified 690-fold. It was a minor component of the outer membrane. Its molecular weight was approximately 55,000. The activity was rather stable to heat, a wide range of pH, and treatment with detergents and organic solvents. No cofactors were required. The pH optimum of the reaction was 8.5. Among various acyl-CoAs, only long chain (C12--C18) thioesters were hydrolyzed. OM esterase also hydrolyzed some kinds of oxy-esters such as p-nitrophenyl acyl esters, monoacyl esters of sucrose and Tween 80 (polyoxyethylene sorbitan monooleate). On the other hand, triglycerides, phospholipids, or hydrophobic monoesters were not hydrolyzed at all. Thus, this enzyme seems to have specificity for long chain acyl esters with hydrophilic groups, whether thio- or oxy-ester. Mutants deficient in this esterase activity were isolated. These mutants were unable to grow on Tween 80 as a sole carbon source. This suggests a possible role of OM esterase in the utilization of acyl esters as carbon sources.     

Peptide synthesis using proteases dissolved in organic solvents

Organic solvent-soluble -chymotrypsin (CT) and subtilisin Carlsberg (SC) are effective catalysts for peptide synthesis in homogeneous organic solutions. The soluble enzymes have values of k_cat/K_m for the reaction of N-Bz-L-Tyr-OEt with L-Leu-NH₂ to yield the dipeptide N-Bz-L-Tyr-L-Leu-NH₂ that are over 3 orders of magnitude higher than their suspended counterparts in isooctane (containing 30% (v/v) tetrahydrofuran (THF) to aid in substrate solubility). Both enzymes are substantially more active in hydrophobic organic solvents than hydrophilic solvents. Adding small concentrations of water (<0.2% and 1% (v/v) in isooctane-THF and ethyl acetate, respectively) results in up to a 150-fold activation of -chymotrypsin-catalyzed peptide synthesis. Importantly, added water does not promote hydrolysis in either isooctane-THF or ethyl acetate; thus, -chymotrypsin is highly selective toward peptide synthesis in the nearly anhydrous organic solutions. Unlike CT, the activation of subtilisin Carlsberg upon partial hydration of isooctane-THF or ethyl acetate was not significant and actually resulted in substantial hydrolysis. Using -chymotrypsin, a variety of tripeptides were produced from dipeptide amino acid esters. Reactivity of D-amino acid amides as acyl acceptors and partially unblocked amino acid acyl donors further expands the generality of the use of organic solvent-soluble enzymes as peptide synthesis catalysts.     

Determination of log P for pressurized carbon dioxide and its characterization as a medium for enzyme reaction

The log P value of pressurized CO(2) at 50 degrees C was determined from the solubility of 1-octanol in CO(2) and compared with other solvent parameters such as permittivity, epsilon, and polarity parameter, E(T)(30). The log P indicated that pressurized CO(2) is rather hydrophilic although it seems hydrophobic being judged from epsilon(r) and E(T)(30). With a change in pressure from 3 to 11.8 MPa, the log P changed from 0.9 to 2.0 while epsilon(r) and E(T)(30) changed only slightly. The log P was linearly correlated to the logarithm of the solubility of water among organic solvents. Pressurized CO(2) was located close to the linear correlation line among the solvents at high pressure (>11 MPa) but its location deviated to the hydrophilic side with a decrease in pressure. Lipase-catalyzed esterification of stearic acid with ethanol and hydrolysis of ethyl stearate were carried out in pressurized CO(2), benzene (log P = 2.0), and n-hexane (log P = 3.5). In spite of the lowest log P value for CO(2), the reaction rate in CO(2) was the highest among solvents tested in pressure range over 10 MPa. The reaction rate was strongly dependent on pressure of CO(2).     

Surfactant-protease complex as a novel biocatalyst for peptide synthesis in hydrophilic organic solvents*

The peptide synthesis from N-acetyl-L-phenylalanine ethyl ester with alaninamide catalyzed by a surfactant-protease complex has been performed in anhydrous hydrophilic organic solvents. Proteases derived from various sources were converted to surfactant-coated complexes with a nonionic surfactant. The surfactant-subtilisin Carlsberg (STC) complex had a higher enzymatic activity than the other protease complexes and the initial reaction rate in tert-amyl alcohol was 26-fold that of STC lyophilized from an optimum aqueous buffer solution. Native STC hardly catalyzed the same reaction. The addition of water to the reaction medium activated the lyophilized STC, however, the reaction rate was much lower than that of the STC complex, and a hydrolysis reaction preferentially proceeded. The STC complex exhibited a high catalytic activity in hydrophilic organic solvents (e.g. tertiary alcohol). The addition of dimethylformamide as a cosolvent improved the solubility of amino acid amides and further activated the STC complex due to the water mimicking effect. When hydrophilic amino acid amides were employed as an acyl acceptor, the peptide formation proceeded efficiently compared to that using hydrophobic substrates. The surfactant-STC complex is a powerful biocatalyst for peptide synthesis because the STC complexes display a high catalytic activity in anhydrous hydrophilic organic solvents and did not require the excess amount of water. Thus the side (hydrolysis) reaction is effectively suppressed and the yield in the dipeptide formation is considerably high.     

Lipase-catalyzed enantioselective esterification of (S)-naproxen hydroxyalkyl ester in organic media

A lipase-catalyzed, enantioselective esterification process in organic solvents was developed for the synthesis of (S)-naproxen hydroxyalkyl ester. With the selection of lipase (Candida rugosa lipase) and reaction medium (isooctane and cyclohexane), a high enantiomeric ratio of <100 for the enzyme was obtained. 1,4-Butanediol was the best acyl acceptor. The carbon chain length of the alcohol had a major effect on the enzyme activity and enantioselectivity of lipase-catalyzed esterification.     

Isolation of choline esters from aqueous solutions by extraction with sodium tetraphenylboron in organic solvents

1. The method is based on the observation that choline esters and sodium tetraphenylboron (Kalignost) form complexes that are insoluble in water but soluble in organic solvents such as nitriles, higher ketones and benzyl alcohol. 2. The extraction procedure is an example of liquid cation exchange where tetraphenylboron is the cation-exchange group. 3. The proportion of choline esters extracted depends on the type and total amount of cation in the aqueous phase and the amount of sodium tetraphenylboron in the organic solvent. 4. The proportion of choline esters extracted is independent of the choline ester concentration, the pH (between 8 and 3) and the relative volumes of the two phases. 5. The affinity of sodium tetraphenylboron for choline esters increases with an increase in the size of the acyl group. 6. The choline ester extracted can be released into an aqueous solution by treatment with strong acids, silver salts and anion-exchange resins.     

Polyethylene Glycol-Modified Lipase Soluble and Active in Organic Solvents

A new approach in biotechnological processes is to use lipase modified with polyethylene glycol(PEG) which has both hydrophilic and hydrophobic properties. The PEG-lipase is soluble in organic solvents such as benzene and chlorinated hydrocarbons and exhibits high enzymic activity in organic solvents. The PEG-lipase catalyses the reverse reaction of hydrolysis in organic solvents; ester synthesis and ester exchange reactions. The PEG-lipase can also be conjugated to magnetite (Fe₃O₄). The magnetic lipase catalyses ester synthesis in organic solvents and can be readily recovered by magnetic force without loss of enzymic activity.     

Anhydrous tert-pentanol as a novel media for the efficient enzymatic synthesis of amoxicillin

The efficient enzymatic synthesis of amoxicillin using anhydrous tert-pentanol as a novel media has been demonstrated for the first time. p-OH-Phenylglycine methyl ester (HPGM) was selected as the activated acyl donor due to its good solubility in organic solvents. The screening results of 21 organic solvents showed that solvents with either strong polarity or poor substrate solubility were unfavorable. Remarkable catalytic activity of the immobilized penicillin acylase (IPA) from Escherichia coli was retained in tert-pentanol, and high yield could be obtained. Effects of various parameters such as acyl donor, water content or cosolvents of tert-pentanol, substrate concentration, temperature, etc., on the enzymatic synthesis of amoxicillin in tert-pentanol were investigated systematically. The best reaction medium, the optimal temperature, initial concentration of 6-APA and HPGM and concentration of enzyme were tert-pentanol, 15 °C, 100, 200 mM and 20 IU/mL, respectively. Under the optimal conditions, the yield of amoxicillin was as high as 88% after a reaction time of 20 h.     

Influence of hydrophobic amino acid residues on the esterification of dipeptides by papain

Summary Esterification of dipeptide was performed with papain immobilized on XAD-7 with methylene chloride as the organic solvent. The esterification of a peptide substrate Box-X-Y-OH is promoted by the presence of a hydrophobic aminoacid residue (e.g., Phe, Leu) in the X (P2) position. Good yields were observed for example with Boc-Phe-Glu-OH and Boc-Ala-Glu-OH. With a hydrophilic aminoacid residue in the X position no esterification of the dipeptide takes place. Instead hydrolysis of the peptide bond occurs. This is also the case with glycine as the aminoacid; for instance Boc-Leu-Gly-OH gives a 80% yield of esterification whereas Boc-Gly-Leu-OH gives only the aminoester Boc-Gly-OR.     

Alginate as immobilization matrix and stabilizing agent in a two-phase liquid system: application in lipase-catalysed reactions.

Alginate was evaluated as an immobilization matrix for enzyme-catalyzed reactions in organic solvents. In contrast to most hydrogels, calcium alginate was found to be stable in a range of organic solvents and to retain the enzyme inside the gel matrix. In hydrophobic solvents, the alginate gel (greater than 95% water) thus provided a stable, two-phase liquid system. The lipase from Candida cylindracea, after immobilization in alginate beads, catalysed esterification and transesterification in n-hexane under both batch and continuous-flow conditions. The operational stability of the lipase was markedly enhanced by alginate entrapment. In the esterification of butanoic acid with n-butanol, better results were obtained in the typical hydrophilic calcium alginate beads than in less hydrophilic matrices. The effects of substrate concentration, matrix area, and polarity of the substrate alcohols and of the organic solvent on the esterification activity were examined. The transesterification of octyl 2-bromopropanoate with ethanol was less efficient than that of ethyl 2-bromopropanoate with octanol. By using the hydrophilic alginate gel as an immobilization matrix in combination with a mobile hydrophobic phase, a two-phase liquid system was achieved with definite advantages for a continuous, enzyme-catalysed process.     

Peptide synthesis by proteases in organic solvents: medium effect on substrate specificity.

The substrate specificities of alpha-chymotrypsin and subtilisins for peptide synthesis in hydrophilic organic solvents were investigated. Chymotrypsin exhibited high specificity to aromatic amino acids as acyl donors, while subtilisin Carlsberg and subtilisin BPN' were specific to aromatic and neutral aliphatic amino acids, in accordance with the S1 specificities of the enzymes for peptide hydrolysis in aqueous solutions. On the contrary, chymotrypsin exhibited higher specificities to hydrophilic amino acid amides as acyl acceptors (nucleophiles) for peptide synthesis with N-acetyl-L-tyrosine ethyl ester, in contrast to the S1' specificity for peptide hydrolysis and peptide synthesis in aqueous solutions. Furthermore, nucleophile specificity changed with the change in water-organic solvent composition; the increase in water content led to increase in relative reactivity of leucinamide to that of alaninamide. It was also found that protection of the carboxyl group of alanine by amidation is much preferable to protection by esterification in terms of reactivity as nucleophiles.     

Multiple controls exerted on in vivo expression of the pepN gene in Escherichia coli: studies with pepN-lacZ operon and protein fusion strains.

Lipoteichoic acid (LTA) from Lactobacillus casei contains poly(glycerophosphate) substituted with D-alanyl ester residues. The distribution of these residues in the in vitro-synthesized polymer is uniform. Esterification of LTA with D-alanine may occur in one of two modes: (i) addition at random or (ii) addition at a defined locus in the poly(glycerophosphate) chain followed by redistribution of the ester residues. A time-dependent transacylation of these residues from D-[14C]alanyl-lipophilic LTA to hydrophilic acceptor was observed. The hydrophilic acceptor was characterized as D-alanyl-hydrophilic LTA. This transacylation requires neither ATP nor the D-alanine incorporation system, i.e., the D-alanine activating enzyme and D-alanine:membrane acceptor ligase. No evidence for an enzyme-catalyzed transacylation reaction was observed. We propose that this process of transacylation may be responsible for the redistribution of D-alanyl residues after esterification to the poly(glycerophosphate). As a result, it is difficult to distinguish between these proposed modes of addition.     

Enzymatic production of enantiopure ketoprofen in a solvent-free two-phase system

Enzymatic hydrolysis conducted in a medium composed of solely substrate is considered to resolve racemic ketoprofen esters. In a system composed of two components, the pure liquid substrate (organic phase) and water (aqueous phase), hydrolysis products can be efficiently removed from the reaction mixtures. Accordingly, in this study we designed a solvent-free two-phase system for the enantioselective enzymatic hydrolysis of ketoprofen esters. In order to further optimize this system, the influences of various factors, such as the pH of the aqueous phase, temperature, enzyme content, and the alcohol chain length of esters, were examined on conversion and enantiomeric excess. 1N NaHCO₃ was identified as the most efficient aqueous phase for the extraction of ketoprofen. Changes in the amount of enzyme did not significantly affect the maximum conversion or the enantiomeric excess. On the other hand, ketoprofen esters with shorter alcohol chains displayed higher initial reaction rates and conversions in solventless media. In the case of ketoprofen propyl ester, for example, the productivity of the solvent-free two-phase system was about 10–100 times higher than that obtained to date for ketoprofen esterification with alcohols in organic solvents. The enantioselectivities obtained in solvent-free media were similar to those obtained for the enantioselective esterification of ketoprofen in organic solvents.     

Enzymatic synthesis of short‐chain esters in n‐hexane and supercritical carbon dioxide: Effect of the acid chain length

Enzymatic synthesis is the preferred way to produce so‐called “natural products.” Hydrolases have been used for short‐chain ester synthesis. These esters present a pleasant flavor and they have a lot of applications in different industries. Novozym 435 from Candida antarctica (EC 3.1.1.3, triacylglycerol lipase) was used for hexyl ester synthesis in n‐hexane and supercritical carbon dioxide (SCCO₂). Direct esterification provided higher yields than transesterification for the synthesis of esters. Several carboxylic acids of different chain lengths were tested for the esterification reactions: acetic, propionic, butyric, caproic and caprylic acids. The reactions were carried out at 40°C and the amount of enzyme used was 13.8 g/mol alcohol. Substrates were added at equimolar concentrations, with sufficient stirring to avoid external diffusion control. Different substrate concentrations up to 1.5 M were used. The working pressure was 14 MPa in the case of SCCO₂ and atmospheric pressure in the case of organic solvent. The results in both solvents show that the reaction rate increases with the chain length of the acid, but the final yields were similar. However, some of the reactions prove to be faster in SCCO₂, except for hexyl acetate and propionate synthesis, in which acetic and propionic acid presented a lower solubility in SCCO₂ due to its high polarity. Moreover, an acetic acid concentration of 1.5 M brought about a strong inhibition of the enzyme activity.     

Immobilized lipase Candida sp. 99-125 catalyzed methanolysis of glycerol trioleate: solvent effect

The immobilized lipase Candida sp. 99-125 catalyzed methanolysis of glycerol trioleate was studied in twelve different solvents in order to deduce the solvent effect through an attempt to correlate the highest yield with such solvent properties as hydrophobicity (log P), dielectric constant (epsilon), and Hildebrand solubility parameter (delta). The results showed that the conversion of glycerol trioleate and yield of oleic acid methyl ester were quite dependent on the solvent. The catalyst lipase in various solvents also needed different optimum amount of water to keep its maximum activity, and generally this lipase in more hydrophobic solvents required more water. The correlation between the highest yield and log P value was found to be reasonable except deviation of data points of certain solvents, while no obvious correlation existed between the other two parameters, dielectric constant (epsilon) and Hildebrand solubility parameter (delta), and the enzyme activity. The study revealed that more hydrophobic solvents such as n-hexane or cyclohexane were more suitable solvents for Candida sp. 99-125 catalyzed transesterification of glycerol trioleate to oleic acid methyl ester.     

Rapid esterification of wheat straw hemicelluloses induced by microwave irradiation

Esterification of wheat straw hemicelluloses with acetyl chloride, propionyl chloride, n-octanoyl chloride, lauroyl chloride, palmitoyl chloride, stearoyl chloride, and oleoyl chloride, respectively, using N-bromosuccinimide (NBS) as a catalyst was achieved in DMF/LICl medium by microwave irradiation. The effects of various acyl chlorides and the molar ratios of xylose units in hemicelluloses/acyl chloride on the degree of substitution (DS) were investigated and DS reached up to 1.34 by a few minutes. ¹³C NMR studies showed that the esterification occurred preferentially at the C-3 and C-2 positions. On the other hand, microwave irradiation brought a partial degradation of the polymer, and therefore resulted in a slight decrease in thermal stability of the hemicellulosic derivatives in comparison with conventional heating technique.