Development and structure of a novel barrier membrane composed of drug-loaded poly(lactic-co-glycolic acid) particles for guided bone regeneration

A novel barrier membrane composed of poly(lactic-co-glycolic acid) particles loaded with dexamethasone (DEX) as a bioactive molecule was produced via a modified nanoprecipitation method without any mixing. The particle membranes had a bilayer structure: one side was smooth and had a compact surface that was connected to larger particles, while the opposite side was rough, porous and connected to smaller particles. Additionally, a cross-section of the particle membrane had a porous structure with nano and micro sized irregular pores. Process optimization revealed that NaCl concentration in the water phase, with acetone as solvent and water as a non-solvent, played critical roles in determining the properties of the particle membranes, such as DEX encapsulation efficiency, thickness and surface morphologies of the particle membranes. A novel barrier membrane containing DEX using polymer particle drug capture technology has been successfully developed.     

Preparation of chitosan-nylon-6 blended membranes containing silver ions as antibacterial materials

Chitosan-nylon-6 blended membranes were prepared by combining solvent evaporation and a phase inversion technique, and then used to chelate silver ions. Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli) were used to study the antibacterial properties of the membranes. Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) indicated hydrogen-bond interactions between chitosan and nylon-6. From the scanning electron microscopy (SEM) pictures, it was observed that with the increase of nylon-6 content, the blended membrane gradually became a material with porous morphology. After chelating silver ions, the tensile strength of the membranes increased. The antibacterial activity with the variation of chitosan content, the pH value and the concentration of the silver nitrate solution used to prepare Ag(+)-loaded membranes were investigated systematically. The results indicated that the chitosan-nylon-6 blended membranes with Ag(+) were antibacterial to both Gram-positive bacteria and Gram-negative bacteria. The antibacterial activity improved with the increased chitosan content due to the larger amount of silver ions loaded. The antibacterial property of the chitosan-nylon-6 blended membranes could be primarily attributed to the content of chitosan and silver ions as well as the surface morphology of the membranes.     

The Novelty in Fabrication of Poly Vinyl Alcohol/κ-Carrageenan Hydrogel with <Emphasis Type="Italic">Lactobacillus bulgaricus</Emphasis> Extract as Anti-inflammatory Wound Dressing Agent

Material barrier properties to microbes are an important issue in many pharmaceutical applications like wound dressings. A wide range of biomaterials has been used to manage the chronic inflamed wounds. Eight hydrogel membranes of poly vinyl alcohol (PVA) with κ-carrageenan (KC) and Lactobacillus bulgaricus extract (LAB) have been prepared by using freeze–thawing technique. To evaluate the membranes efficiency as wound dressing agents, various tests have been done like gel fraction, swelling behavior, mechanical properties, etc. The antibacterial activities of the prepared membranes were tested against the antibiotic-resistant bacterial isolates. In addition, the safety usage of the prepared hydrogel was checked on human dermal fibroblast cells. The anti-inflammatory properties of the prepared hydrogel on LPS-PBMC cell inflammatory model were quantified using enzyme-linked immunosorbent assay (ELISA) and real-time polymerase chain reaction (RT-qPCR). The analysis data of TGA, SEM, gel fraction, and swelling behavior showed changes in properties of prepared PVA\KC\LAB hydrogel membrane than pure PVA hydrogel membrane. The antibacterial activities of the prepared membranes augmented in LAB extract-prepared membranes. Out of the eight used hydrogel membranes, the PVAKC4 hydrogel membrane is the safest one on fibroblast cellular proliferation with a maximum proliferation percentage 97.3%. Also, all the used hydrogel membrane showed abilities to reduce the concentration of IL-2 and IL-8 compared with both negative and positive control. In addition, almost all the prepared hydrogel membrane showed variable abilities to downregulate the expression of TNF-α gene with superior effect of hydrogel membrane KC1. PVA/KC/LAB extract hydrogel membrane may be a promising material for wound dressing application and could accelerate the healing process of the chronic wound because of its antimicrobial and anti-inflammatory properties.     

Design,in vitro bioactivity and in vivo influence on oxidative stress and matrix metalloproteinases of bioglasses in experimental skin wound

BackgroundThe bioactive glasses (BGs) are very attractive materials increasingly used in healing skin lesions due to their antibacterial effect and stimulation of collagen deposition and angiogenesis. In this study, three specimens of bioactive glasses (BG1, BG2 and BG3) have been synthesized and characterized.MethodsIn order to evaluate their in vitro bioactivity, the pH measurements, zeta potential and the concentration of Ca²⁺ and fluor ions released after immersion in phosphate buffered saline (PBS) followed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy, inductively coupled plasma optical emission spectrometry (ICP-OES) and for BG1 and BG3, X-ray powder diffraction analysis, were performed. X-ray photoelectron spectroscopy (XPS) was also used for detection of different ions in the solid bioglasses before immersion in PBS. The impact of BG1 and BG3 on skin healing mechanisms was evaluated by oxidative stress and matrix metalloproteases (MMP)-2 and -9 and by histopathological analysis.ResultsThe results have shown that all the BGs tested are characterized by a very high degradation rate and a very fast Ca²⁺, fluor and boron releases and displayed changed surface morphology at SEM, after 7 and 14 days of immersion in PBS. In addition, BG1 and BG3 reduced in vivo the lipid peroxidation, increased the nitric oxide, especially at 14 days and improved superoxide dismutase activity, mainly in BG1 treated animals. In parallel, both BG1 and BG3, diminished MMP-9 at 14 days and increased the proportion of normal collagen in the bed of the wound, particularly BG3.ConclusionThese results suggested that due to the antioxidant and anti-inflammatory properties of components released from BGs and regulatory properties on MMPs activities, BGs can exert beneficial effects in wound healing.     

Effect of novel curcumin‐encapsulated chitosan–bioglass drug on bone and skin repair after gamma radiation: experimental study on a Wistar rat model

Radiation therapy contributes to a significant increase in bone osteoporosis and skin loss. Various natural health products might be beneficial to reduce bone and skin alterations. Curcumin (CUR) medicines derived from natural plants have played an important role in health care. This study aims at synthesizing and evaluating the performance therapy of CUR‐encapsulated bioglass–chitosan (CUR–BG–CH). In vitro, the antioxidant assay was evaluated by using 1,1‐diphenyl‐2‐picrylhydrazyl free‐radical (DPPH) scavenging and the nitroblue tetrazolium reduction. The CUR–BG–CH antimicrobial effects were tested in liquid media. In vivo, after rat ⁶⁰Co γ‐radiation, the tissue wound‐healing process was studied by grafting CUR and CUR–BG–CH in femoral condyle and dorsal skin rat tissue. The antioxidant studies indicated that CUR–BG–CH quenches free radicals more efficiently than unmodified CUR and had effective DPPH (91%) and superoxide anion (51%) radical scavenging activities. The CUR–BG–CH biomaterial exhibited an important antimicrobial activity against Staphylococcus aureus. The histomorphometric parameters showed amelioration in CUR–BG–CH‐treated rats. An improved mechanical property was noticed (33.16 ± 5.0 HV) when compared with that of unmodified CUR group (23.15 ± 4.9 HV). A significant decrease in tumour necrosis factor‐α cytokine production was noted in the CUR–BG–CH rats (90 pg/ml) as compared with that of unmodified CUR group (240 pg/ml). The total amount of hydroxyproline was significantly enhanced (33.5%) in CUR–BG–CH group as compared with that of control. Our findings suggested that CUR–BG–CH might have promising potential applications for wound healing. Copyright © 2015 John Wiley & Sons, Ltd.     

In vitro antistaphylococcal effects of a novel 45S5 bioglass/agar–gelatin biocomposite films

Aims

To assess the antibacterial efficacy of new composite materials developed from microparticles of 45S5 bioactive glass (BG) and agar–gelatin films.

Methods and Results

In vitro antibacterial activity was evaluated against Staphylococcus spp. because of the importance of this pathogen in damaged tissues and in failures associated with biomaterial implants. To our knowledge, this is the first paper reporting on the suitable combination of BG and agar–gelatin for bioactive and antibacterial films. Bacterial suspensions up or below 10⁵ CFU ml^?1 reflecting situations of wound infection and of noninfection, respectively, were prepared and then put in contact with the biomaterials at 37°C. After 24 and 48 h of incubation, the pH value was measured and the staphylococci strains viability was determined by counting in Mueller–Hinton agar plates. Moreover, the biomaterials were prepared for observation under scanning electron microscopy (SEM). Biocomposites (BCs) showed a strong antibacterial effect against all staphylococci strains tested. Some differences were found depending on the strain, the inoculum size and the contact time. This effect was correlated with an alkalinization of the media. By SEM analyses, no bacterial presence was observed on the surface of BCs in any of the cell concentrations tested at any time.

Conclusions

Overall, the coating of 45S5 BG on agar–gelatin films promoted BCs with strong antistaphylococcal activity. The effect was efficient under bacterial concentration up or below 10⁵ CFU ml^?1. Additionally, none of the strains were found on BCs surfaces.

Significance and Impact of Study

45S5 bioglass/agar–gelatin biocomposite films are reported for the first time. The results suggest a potential application as wound dressing.     

Basic fibroblast growth factor-loaded, mineralized biopolymer-nanofiber scaffold improves adhesion and proliferation of rat mesenchymal stem cells

Nanofibrous matrices are attractive scaffolding platforms for tissue regeneration. Modification of the nanofiber surface, particularly with biological proteins, improves cellular interactions. Here, we loaded basic fibroblast growth factor (bFGF) onto mineralized nanofibers and investigated the effect on adhesion and proliferation of rat mesenchymal stem cells. bFGF loading was significantly higher on the mineralized nanofiber than on the non-mineralized one. Release of bFGF from the mineralized nanofibers was continuous over 2 weeks. Cells cultured on the bFGF-loaded nanofiber attached and proliferated in significantly higher numbers than those on the bFGF-free nanofiber. bFGF-receptor inhibition study confirmed the biological role played by the loaded bFGF. This study details the advantages of the mineralized nanofiber surface for the loading and delivery bFGF, and thus the bFGF-loaded nanofiber scaffold may be useful for tissue repair and regeneration.     

A new concept in polymeric thin-film composite nanofiltration membranes with antibacterial properties

A new, thin film, biofouling resistant, nanofiltration (NF) membrane was fabricated with two key characteristics, viz. a low rate of silver (Ag) release and long-lasting antibacterial properties. In the new approach, nanoparticles were embedded completely in a polymeric thin-film layer. A comparison was made between the new thin-film composite (TFC), NF membrane and thin-film nanocomposite (TFN), and antibacterial NF membranes. Both types of NF membrane were fabricated by interfacial polymerization on a polysulphone sublayer using m-phenylenediamine and trimesoyl chloride as an amine monomer and an acid chloride monomer, respectively. Energy dispersive X-ray (EDX) microanalysis demonstrated the presence of Ag nanoparticles. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to study the cross-sectional and surface morphological properties of the NF membranes. Permeability and salt rejection were tested using a dead-end filtration cell. Ag leaching from the membranes was measured using inductively coupled mass spectrometry (ICP–MS). Morphological studies showed that the TFC NF membranes had better thin-film formation (a more compact structure and a smoother surface) than TFN NF membranes. Performance experiments on TFC NF membranes revealed that permeability was good, without sacrificing salt rejection. The antibacterial properties of the fabricated membranes were tested using the disk diffusion method and viable plate counts. The antibiofouling properties of the membranes were examined by measuring the quantity of bacterial cells released from the biofilm formed (as a function of the amount of biofilm present). A more sensitive surface was observed compared to that of a typical antibacterial NF membrane. The Ag leaching rates were low, which will likely result in long-lasting antibacterial and biofouling resistant properties.     

Wound-dressing materials with antibacterial activity from electrospun polyurethane-dextran nanofiber mats containing ciprofloxacin HCl

Dextran is a versatile biomacromolecule for preparing electrospun nanofibrous membranes by blending with either water-soluble bioactive agents or hydrophobic biodegradable polymers for biomedical applications. In this study, an antibacterial electrospun scaffold was prepared by electrospinning of a solution composed of dextran, polyurethane (PU) and ciprofloxacin HCl (CipHCl) drug. The obtained nanofiber mats have good morphology. The mats were characterized by various analytical techniques. The interaction parameters between fibroblasts and the PU-dextran and PU-dextran-drug scaffolds such as viability, proliferation, and attachment were investigated. The results indicated that the cells interacted favorably with the scaffolds especially the drug-containing one. Moreover, the composite mat showed good bactericidal activity against both of Gram-positive and Gram-negative bacteria. Overall, our results conclude that the introduced scaffold might be an ideal biomaterial for wound dressing applications.     

FTIR and XPS studies of protein adsorption onto functionalized bioactive glass

Adsorption and structural changes that occur upon interaction between methemoglobin (MetHb) and 5-methyl-aminomethyl-uridine forming enzyme (MnmE) with the surface of a bioactive glass (BG) were investigated by Fourier Transform Infrared (FTIR) spectroscopy and X-ray Photoelectron Spectroscopy (XPS). The effect of glutaraldehyde (GA) as a coupling agent for protein adsorption on BG was also investigated. The comparative analysis of FTIR spectra recorded from lyophilized proteins and from bioactive glass surface after protein adsorption was considered in order to obtain information about the changes in the secondary structure of the proteins. XPS data were used to determine the surface coverage. The unfolding of adsorbed proteins due to interactions between the internal hydrophobic protein domains and the hydrophobic BG surface was evidenced. After adsorption, the amount of α-helix decreases and less ordered structures (turns, random coils and aggregates) are preponderant. These changes are less pronounced on the BG functionalized with GA, suggesting that the treatment with GA preserves significantly larger amounts of α-helices in the structure of both proteins after adsorption.     

A simple approach to constructing antibacterial and anti-biofouling nanofibrous membranes

In this work, antibacterial and anti-adhesive polymeric thin films were constructed on polyacrylonitrile (PAN) nanofibrous membranes in order to extend their applications. Polyhexamethylene guanidine hydrochloride (PHGH) as an antibacterial agent and heparin (HP) as an anti-adhesive agent have been successfully coated onto the membranes via a layer-by-layer (LBL) assembly technique confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), energy-dispersive spectroscopy (EDS) and scanning electron microscopy (SEM). The antibacterial properties of LBL-functionalized PAN nanofibrous membranes were evaluated using the Gram-positive bacterium Staphylococcus aureus and the Gram-negative Escherichia coli. Furthermore, the dependence of the antibacterial activity and anti-biofouling performance on the number of layers in the LBL films was investigated quantitatively. It was found that these LBL-modified nanofibrous membranes possessed high antibacterial activities, easy-cleaning properties and stability under physiological conditions, thus qualifying them as candidates for anti-biofouling coatings.     

Surface modification of poly(L-lactic acid) membrane via layer-by-layer assembly of silver nanoparticle-embedded polyelectrolyte multilayer

The improvement of hydrophilicity, antibacterial activity, hemocompatibility, and cytocompatibility of poly(L-lactic acid) (PLLA) membrane was developed via polyelectrolyte multilayer (PEM) immobilization. Colloidal silver nanoparticles were prepared by using dextran sulfate (DS) as a stabilizer to precede chemical reduction by dextrose. The polysaccharide PEMs, including chitosan (CH) and dextran sulfate (DS)-stabilized silver nanosized colloid (DSS), were successfully deposited on the aminolyzed PLLA membrane in a layer-by-layer (LBL) self-assembly manner. The obtained results showed that the contact angle of PLLA membranes decreased with PEMs grafting layers and reached a steady value after four bilayers of coating, hence suggesting that full coverage was achieved. The PLLA-PEM membranes with DSS as the outermost layer could resist platelet adhesion and human plasma fibrinogen (HPF) adsorption, while prolonging the blood coagulation time. The PLLA-PEM membranes could possess antibacterial activity against Methicilin-resistant Staphylococus aureus (MRSA). In addition, the proliferation and viability of human endothelial cells (ECs) on PLLA-PEM membranes could be significantly improved. Overall results demonstrated that such a fast, easy processing and shape-independent method for an antithrombogenic coating can be used for applications in hemodialysis devices.     

大肠杆菌菌蜕装载质粒DNA实验方法的优化

目的:优化大肠杆菌菌蜕装载质粒的效率,并将装载质粒的菌蜕转染抗原提呈细胞,以提高核酸疫苗的递送水平。方法:将质粒pHH43转化大肠杆菌DH5α,制备大肠杆菌菌蜕;优化菌蜕装载质粒时菌蜕、质粒和膜囊的比例,获得更高的装载效率,通过扫描及透射电镜、流式细胞术观察其形态变化及装载效率;将装载质粒的菌蜕与抗原提呈细胞——巨噬细胞RAW264.7和树突状细胞DC2.4共孵育,观察吞噬效果。结果:优化了大肠杆菌菌蜕装载质粒的效率,当菌蜕、质粒、膜囊的比例为7∶10∶4时效率达到最佳,装载DNA效率达98%以上;抗原提呈细胞吞噬装载了质粒的菌蜕,效率达100%。结论:大肠杆菌菌蜕可高效装载核酸疫苗,且高效被抗原提呈细胞捕获,有助于提高核酸疫苗的递送和免疫效果的提高。     

The Osteogenic Potential of Mesoporous Bioglasses/Silk and Non-Mesoporous Bioglasses/Silk Scaffolds in Ovariectomized Rats: In vitro and In vivo Evaluation

Silk-based scaffolds have been introduced to bone tissue regeneration for years, however, their local therapeutic efficency in bone metabolic disease condition has been seldom reported. According to our previous report, mesoporous bioactive glass (MBG)/silk scaffolds exhibits superior in vitro bioactivity and in vivo osteogenic properties compared to non-mesoporous bioactive glass (BG)/silk scaffolds, but no information could be found about their efficiency in osteoporotic (OVX) environment. This study investigated a biomaterial-based approach for improving MSCs behavior in vitro, and accelerating OVX defect healing by using 3D BG/silk and MBG/silk scaffolds, and pure silk scaffolds as control. The results of SEM, CCK-8 assay and quantitative ALP activity showed that MBG/silk scaffolds can improve attachment, proliferation and osteogenic differentiation of both O-MSCs and sham control. In vivo therapeutic efficiency was evaluated by μCT analysis, hematoxylin and eosin staining, safranin O staining and tartrate-resistant acid phosphatase, indicating accelerated bone formation with compatible scaffold degradation and reduced osteoclastic response of defect healing in OVX rats after 2 and 4 weeks treatment, with a rank order of MBG/silk > BG/silk > silk group. Immunohistochemical markers of COL I, OPN, BSP and OCN also revealed that MBG/silk scaffolds can better induce accelerated collagen and non-collagen matrix production. The findings of this study suggest that MBG/silk scaffolds provide a better environment for cell attachment, proliferation and differentiation, and act as potential substitute for treating local osteoporotic defects.     

Synthesis and characterization of chitosan/ZnO nanoparticle composite membranes

Novel chitosan/ZnO nanoparticle (CS/nano-ZnO) composite membranes were prepared via the method of sol-cast transformation and studied by UV-vis absorption spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray fluorescence spectrometry (EDX). The characterization revealed that ZnO nanoparticles dispersed homogeneously within the chitosan matrix. The mechanical and antibacterial properties of the product were investigated. The results showed that the ZnO content had an effect on the mechanical properties of CS/nano-ZnO composite membranes, and that the antibacterial activities of CS membranes for Bacillus subtilis, Escherichia coli, and Staphylococcus aureus were enhanced by the incorporation of ZnO. Further, CS/nano-ZnO composite membranes with 6-10 wt % ZnO exhibited high antibacterial activities.     

A Novel Injectable Borate Bioactive Glass Cement as an Antibiotic Delivery Vehicle for Treating Osteomyelitis

Background

A novel injectable cement composed of chitosan-bonded borate bioactive glass (BG) particles was evaluated as a carrier for local delivery of vancomycin in the treatment of osteomyelitis in a rabbit tibial model.

Materials and Methods

The setting time, injectability, and compressive strength of the borate BG cement, and the release profile of vancomycin from the cement were measured in vitro. The capacity of the vancomycin-loaded BG cement to eradicate methicillin-resistant Staphylococcus aureus (MRSA)-induced osteomyelitis in rabbit tibiae in vivo was evaluated and compared with that for a vancomycin-loaded calcium sulfate (CS) cement and for intravenous injection of vancomycin.

Results

The BG cement had an injectability of >90% during the first 3 minutes after mixing, hardened within 30 minutes and, after hardening, had a compressive strength of 18±2 MPa. Vancomycin was released from the BG cement into phosphate-buffered saline for up to 36 days, and the cumulative amount of vancomycin released was 86% of the amount initially loaded into the cement. In comparison, vancomycin was released from the CS cement for up 28 days and the cumulative amount released was 89%. Two months post-surgery, radiography and microbiological tests showed that the BG and CS cements had a better ability to eradicate osteomyelitis when compared to intravenous injection of vancomycin, but there was no significant difference between the BG and CS cements in eradicating the infection. Histological examination showed that the BG cement was biocompatible and had a good capacity for regenerating bone in the tibial defects.

Conclusions

These results indicate that borate BG cement is a promising material both as an injectable carrier for vancomycin in the eradication of osteomyelitis and as an osteoconductive matrix to regenerate bone after the infection is cured.     

Developing an antibacterial super-hydrophilic barrier between bacteria and membranes to mitigate the severe impacts of biofouling

Biofouling produces concentrated microbial populations with highly resistive biofilms and is considered to be a serious obstacle for a wide range of membrane technology applications. An antibacterial super-hydrophilic barrier could help to reduce biofouling by preventing direct contact between membranes and bacteria. In this study, an antibacterial super-hydrophilic barrier consisting of a layer of TiO₂ nanoparticles (NPs) was developed on polyvinylidene fluoride (PVDF)-based membrane via a facile technique. The results demonstrated that the presence of TiO₂ NPs eliminated the first step of biofouling, ie bacterial adhesion to the membrane. In addition, after bacterial deposition onto the membrane during ultrafiltration (UF), the TiO₂ NPs significantly retarded bacterial growth and reproduction (the second step of biofouling). During UF, the membrane flux decreased due to bacterial deposition, but 85% of the flux was recovered through physical cleaning using water. This study sheds light on the potential advantages of antibacterial super-hydrophilic membranes for biofouling mitigation.     

Functionalization of Titanium with Chitosan via Silanation: Evaluation of Biological and Mechanical Performances

Complications in dentistry and orthopaedic surgery are mainly induced by peri-implant bacterial infections and current implant devices do not prevent such infections. The coating of antibacterial molecules such as chitosan on its surface would give the implant bioactive properties. The major challenge of this type of coating is the attachment of chitosan to a metal substrate. In this study, we propose to investigate the functionalization of titanium with chitosan via a silanation. Firstly, the surface chemistry and mechanical properties of such coating were evaluated. We also verified if the coated chitosan retained its biocompatibility with the peri-implant cells, as well as its antibacterial properties. FTIR and Tof-SIMS analyses confirmed the presence of chitosan on the titanium surface. This coating showed great scratch resistance and was strongly adhesive to the substrate. These mechanical properties were consistent with an implantology application. The Chitosan-coated surfaces showed strong inhibition of Actinomyces naeslundii growth; they nonetheless showed a non significant inhibition against Porphyromonas gingivalis after 32 hours in liquid media. The chitosan-coating also demonstrated good biocompatibility to NIH3T3 fibroblasts. Thus this method of covalent coating provides a biocompatible material with improved bioactive properties. These results proved that covalent coating of chitosan has significant potential in biomedical device implantation.     

Towards optimization of odonto/osteogenic bioengineering: in vitro comparison of simvastatin,sodium fluoride,melanocyte-stimulating hormone

Tissue engineering has emerged as a potential therapeutic option for dental problems in recent years. One of the policies in tissue engineering is to use both scaffolds and additive factors for enhancing cell responses. This study aims to evaluate and compare the effect of three types of biofactors on poly-caprolactone-poly-ethylene glycol-poly caprolactone (PCL-PEG-PCL) nanofibrous scaffold on human dental pulp stem cell (hDPSCs) engineering. The PCL-PEG-PCL copolymer was synthesized with ring opening polymerization method, and its nanofiber scaffold was prepared by electrospinning method. Nanofibrous scaffold-seeded hDPSCs were treated with sodium fluoride (NaF), melanocyte-stimulating hormone (MSH), or simvastatin (SIM). Non-treated nanofiber seeded cells were utilized as control. The viability, biocompatibility, adhesion, proliferation rate, morphology, osteo/odontogenic potential, and the expression of tissue-specific genes were studied. The results showed that significant higher results demonstrated significant higher adhesive behavior, viability, alizarin red activity, and dentin specific gene expression in MSH- and SIM-treated cells (p < 0.05). This study is unique; in that, it compares the effects of different treatments for optimization of dental tissue engineering.