Characterization of operating parameters for XMuLV inactivation by low pH treatment

To ensure the viral safety of protein therapeutics made in mammalian cells, purification processes include dedicated viral clearance steps to remove or inactivate adventitious and endogenous viruses. One such dedicated step is low pH treatment, a robust and effective method commonly used in monoclonal antibody production to inactivate enveloped viruses. To characterize the operating space for low pH viral inactivation, we performed a statistically designed experiment evaluating the effect of pH, temperature, hold duration, acid type, and buffer concentration on inactivation of the retrovirus model, XMuLV. An additional single factor experiment was performed to study the effect of protein concentration. These data were used to generate predictive models of inactivation at each time point studied, which can be used to identify conditions for robust and effective XMuLV inactivation. At pH 3.6, XMuLV inactivation was rapid, robust, and relatively unaffected by the other factors studied, providing support for this as a generic viral inactivation condition for products that can tolerate this low pH. At pH 3.7 and 3.8, other factors besides pH affected XMuLV inactivation. By understanding the impact of each factor on inactivation, the factors can be manipulated within the operating space to ensure effective inactivation while achieving desired product quality goals. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 32:89–97, 2016     

Real time quantitative PCR as a method to evaluate xenotropic murine leukemia virus removal during pharmaceutical protein purification

Chinese hamster ovary cells used for pharmaceutical protein production express noninfectious retrovirus-like particles. To assure the safety of pharmaceutical proteins, validation of the ability of manufacturing processes to clear retrovirus-like particles is required for product registration. Xenotropic murine leukemia virus (X-MuLV) is often used as a model virus for clearance studies. Traditionally, cell-based infectivity assay has been the standard virus quantification method. In this article, a real time quantitative PCR (Q-PCR) method has been developed for X-MuLV detection/quantification. This method provides accurate and reproducible quantification of X-MuLV particle RNA (pRNA) over a linear dynamic range of at least 100,000-fold with a quantification limit of approximately 1.5 pRNA copies microL(-1). It is about 100-fold more sensitive than the cell-based infectivity assay. High concentrations of protein and cellular DNA present in test samples have been demonstrated to have no impact on X-MuLV quantification. The X-MuLV clearance during chromatography and filtration procedures determined by this method is highly comparable with that determined by the cell-based infectivity assay. X-MuLV clearance measured by both methods showed that anion exchange chromatography (QSFF) and DV50 viral filtration are robust retroviral removal steps. In addition, combination of the two methods was able to distinguish the viral removal from inactivation by the Protein A chromatography, and fully recognize the viral clearance capacity of this step. This new method offers significant advantages over cell-based infectivity assays. It could be used to substitute cell-based infectivity assays for process validation of viral removal procedures, but not inactivation steps. Its availability should greatly facilitate and reduce the cost of viral clearance evaluations for new biologic product development.     

Low pH inactivation for xenotropic gamma retrovirus in recombinant human TNF-α receptor immunoglobulin G and mechanism of inactivation

CHO-derived recombinant proteins for human therapeutic are used commonly. There are noninfectious endogenous retroviruses in CHO cells. Validation study for inactivation process is required. Murine xenotropic gamma retrovirus (X-MulV) is a model virus in validation study. In our previous study, optimum conditions for X-MulV inactivation were sifted. In this study, we performed a further research on low pH inactivation for evaluation of X-MulV clearance in manufacturing of recombinant human TNF-α receptor immunoglobulin G fusion proteins (rhTNF-α) for injection. Cell-based infectivity assay was used for the evaluation of X-MulV clearance. RhTNF-α were spiked with X-MulV and were inactivated at pH 3.60 ∼ 3.90, 25 ± 2 °C, and 0 ∼ 240 min, respectively. Samples incubated at the conditions for 15 ∼ 180 min were not inactivated effectively. For 4 h incubation, log₁₀ reductions were achieved 5.0 log₁₀. Biological activity of rhTNF-α incubated at pH 3.60, 25 °C for 4 h, which was assayed on murine L929 fibroblasts cells, was not affected by low pH. Env gene of X-MulV, which was detected by conventional PCR method for the first time, was not detected after incubation at pH 3.60, and it may be the mechanism of low pH inactivation.     

Assessment of viral inactivation during pH 3.3 pepsin digestion and caprylic acid treatment of antivenoms

Antivenoms are manufactured by the fractionation of animal plasma which may possibly be contaminated by infectious agents pathogenic to humans. This study was carried out to determine whether pre-existing antivenom production steps, as carried out by EgyVac in Egypt, may reduce viral risks. Two typical manufacturing steps were studied by performing down-scaled viral inactivation experiments: (a) a pH 3.3 pepsin digestion of diluted plasma at 30 degrees C for 1h, and (b) a caprylic acid treatment of a purified F(ab')2 fragment fraction at 18 degrees C for 1h. Three lipid-enveloped (LE) viruses [bovine viral diarrhoea virus (BVDV), pseudorabies virus (PRV), and vesicular stomatitis virus (VSV)] and one non-lipid-enveloped (NLE) virus [encephalomyocarditis virus (EMC)] were used as models. Kinetics of inactivation was determined by taking samples at 3 time-points during the treatments. The pH 3.3 pepsin digestion resulted in complete clearance of PRV (>7.0 log(10)) and in almost complete reduction of VSV (>4.5 but < or =6.4 log(10)), and in a limited inactivation of BVDV (1.7 log(10)). EMC inactivation was > or =2.5 but < or =5.7 log(10). The caprylic acid treatment resulted in complete inactivation of the 3 LE viruses tested: BVDV (>6.6 log(10)), PRV (>6.6 log(10)), and VSV (>7.0 log(10)). For EMC no significant reduction was obtained (0.7 log(10)). Cumulative reduction was >13.6, >11.5, >8.3 and > or =2.5 for PRV, VSV, BVDV and EMC, respectively. Therefore the current manufacturing processes of at least some animal antisera already include production steps that can ensure robust viral inactivation of LE viruses and moderate inactivation of a NLE virus.     

Simulation of continuous low pH viral inactivation inside a coiled flow inverter

Continuous production of monoclonal antibodies is gaining more and more importance. To ensure continuous flow through the entire process as well as viral safety, continuous viral clearance needs to be investigated as well. This study focuses on low pH viral inactivation inside a coiled flow inverter (CFI). Computational fluid dynamics (CFD) simulation is used to gain further insight into the inactivation process inside the apparatus. The influence of viruses in comparison to different tracer elements on the residence time distribution (RTD) behavior is investigated. Finally, the viral inactivation kinetics are implemented into the CFD simulation and real process conditions are simulated. These are compared to experimental results. To the authors' knowledge, this study represents the first successful simulation of continuous viral inactivation inside a CFI. It allows the detailed analysis of processes inside the apparatus and the prediction of experimental virus study results and will therefore contribute to the effective planning of future validation studies.     

Viral clearance in end-to-end integrated continuous process for mAb purification: Total flow-through integrated polishing on two columns connected to virus filtration

There are few reports of the adoption of continuous processes in bioproduction, particularly the implementation of end-to-end continuous or integrated processes, due to difficulties such as feed adjustment and incorporating virus filtration. Here, we propose an end-to-end integrated continuous process for a monoclonal antibody (mAb) with three integrated process segments: upstream production processes with pool-less direct connection, pooled low pH virus inactivation with pH control and a total flow-through integrated polishing process in which two columns were directly connected with a virus filter. The pooled virus inactivation step defines the batch, and high impurities reduction and mAb recovery were achieved for batches conducted in succession. Viral clearance tests also confirmed robust virus reduction for the flow-through two-column chromatography and the virus filtration steps. Additionally, viral clearance tests with two different hollow fiber virus filters operated at flux ranging from 1.5 to 40 LMH (liters per effective surface area of filter in square meters per hour) confirmed robust virus reduction over these ranges. Complete clearance with virus logarithmic reduction value ≥4 was achieved even with a process pause at the lowest flux. The end-to-end integrated continuous process proposed in this study is amenable to production processes, and the investigated virus filters have excellent applicability to continuous processes conducted at constant flux.     

Application of machine learning methods to pathogen safety evaluation in biological manufacturing processes

The production of recombinant therapeutic proteins from animal or human cell lines entails the risk of endogenous viral contamination from cell substrates and adventitious agents from raw materials and environment. One of the approaches to control such potential viral contamination is to ensure the manufacturing process can adequately clear the potential viral contaminants. Viral clearance for production of human monoclonal antibodies is achieved by dedicated unit operations, such as low pH inactivation, viral filtration, and chromatographic separation. The process development of each viral clearance step for a new antibody production requires significant effort and resources invested in wet laboratory experiments for process characterization studies. Machine learning methods have the potential to help streamline the development and optimization of viral clearance unit operations for new therapeutic antibodies. The current work focuses on evaluating the usefulness of machine learning methods for process understanding and predictive modeling for viral clearance via a case study on low pH viral inactivation.     

Characterizing the impact of pressure on virus filtration processes and establishing design spaces to ensure effective parvovirus removal

Virus filtration provides robust removal of potential viral contaminants and is a critical step during the manufacture of biotherapeutic products. However, recent studies have shown that small virus removal can be impacted by low operating pressure and depressurization. To better understand the impact of these conditions and to define robust virus filtration design spaces, we conducted multivariate analyses to evaluate parvovirus removal over wide ranges of operating pressure, solution pH, and conductivity for three mAb products on Planova? BioEX and 20N filters. Pressure ranges from 0.69 to 3.43 bar (10.0–49.7 psi) for Planova BioEX filters and from 0.50 to 1.10 bar (7.3 to 16.0 psi) for Planova 20N filters were identified as ranges over which effective removal of parvovirus is achieved for different products over wide ranges of pH and conductivity. Viral clearance at operating pressure below the robust pressure range suggests that effective parvovirus removal can be achieved at low pressure but that Minute virus of mice (MVM) logarithmic reduction value (LRV) results may be impacted by product and solution conditions. These results establish robust design spaces for Planova BioEX and 20N filters where high parvovirus clearance can be expected for most antibody products and provide further understanding of viral clearance mechanisms. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1294–1302, 2017     

Using high throughput screening to define virus clearance by chromatography resins

High throughput screening (HTS) of chromatography resins can accelerate downstream process development by rapidly providing information on product and impurity partitioning over a wide range of experimental conditions. In addition to the removal of typical product and process‐related impurities, chromatography steps are also used to remove potential adventitious viral contaminants and non‐infectious retrovirus‐like particles expressed by rodent cell lines used for production. This article evaluates the feasibility of using HTS in a 96‐well batch‐binding format to study removal of the model retrovirus xenotropic murine leukemia virus (xMuLV) from product streams. Two resins were examined: the anion exchange resin Q Sepharose Fast Flow? (QSFF) and Capto adhere?, a mixed mode resin. QSFF batch‐binding HTS data was generated using two mAbs at various pHs, NaCl concentrations, and levels of impurities. Comparison of HTS data to that generated using the column format showed good agreement with respect to virus retentation at different pHs, NaCl concentrations and impurity levels. Results indicate that NaCl concentration and impurity level, but not pH, are key parameters that can impact xMuLV binding to both resins. Binding of xMuLV to Capto adhere appeared to tolerate higher levels of NaCl and impurity than QSFF, and showed some product‐specific impact on binding that was not observed with QSFF. Overall, the results demonstrate that the 96‐well batch‐binding HTS technique can be an effective tool for rapidly defining conditions for robust virus clearance on chromatographic resins. Biotechnol. Bioeng. 2013; 110: 1984–1994. © 2013 Wiley Periodicals, Inc.     

Virus study for continuous low pH viral inactivation inside a coiled flow inverter

Continuous processing for the production of monoclonal antibodies (mAb) gains more and more importance. Several solutions exist for all the necessary production steps, leading to the possibility to build fully continuous processes. Low pH viral inactivation is a part of the standard platform process for mAb production. Consequently, Klutz et al. introduced the coiled flow inverter (CFI) as a tool for continuous low pH viral inactivation. Besides theoretical calculations of viral reduction, no viral clearance study has been presented so far. In addition, the validation of continuous viral clearance is often neglected in the already existing studies for continuous processing. This study shows in detail the development and execution of a virus study for continuous low pH viral inactivation inside a CFI. The concept presented is also valid for adaptation to other continuous viral clearance steps. The development of this concept includes the technical rationale for an experimental setup, a valid spiking procedure, and finally a sampling method. The experimental results shown represent a viral study using xenotropic murine leukemia virus as a model virus. Two different protein A (ProtA) chromatography setups with varying pH levels were tested. In addition, one of these setups was tested against a batch experiment utilizing the same process material. The results show that sufficient low pH viral inactivation (decadic logarithm reduction value >4) was achieved in all experiments. Complete viral inactivation took place within the first 14.5 min for both continuous studies and the batch study, hence showing similar results. This study therefore represents a successful virus study concept and experiment for a continuous viral inactivation step. Moreover, it was shown that the transfer from batch results to the continuous process is possible. This is accomplished by the narrow residence time distribution of the CFI, showing how close the setup approaches the ideal plug flow and with that batch operation.     

Validation and optimization of viral clearance in a downstream continuous chromatography setting

Continuous bioprocessing holds the potential to improve product consistency, accelerate productivity, and lower cost of production. However, switching a bioprocess from traditional batch to continuous mode requires surmounting business and regulatory challenges. A key regulatory requirement for all biopharmaceuticals is virus safety, which is assured through a combination of testing and virus clearance through purification unit operations. For continuous processing, unit operations such as capture chromatography have aspects that could be impacted by a change to continuous multicolumn operation, for example, do they clear viruses as well as a traditional batch single column. In this study we evaluate how modifying chromatographic parameters including the linear velocity and resin capacity utilization could impact virus clearance in the context of moving from a single column to multicolumn operation. A Design of Experiment (DoE) approach was taken with two model monoclonal antibodies (mAbs) and two bacteriophages used as mammalian virus surrogates. The DoE enabled the identification of best and worst-case scenario for virus clearance overall. Using these best and worst-case conditions, virus clearance was tested in single column and multicolumn modes and found to be similar as measured by Log Reduction Values (LRV). The parameters identified as impactful for viral clearance in single column mode were predictive of multicolumn modes. Thus, these results support the hypothesis that the viral clearance capabilities of a multicolumn continuous Protein A system may be evaluated using an appropriately scaled-down single mode column and equipment.     

Bracketed generic inactivation of rodent retroviruses by low pH treatment for monoclonal antibodies and recombinant proteins

Viral safety is a predominant concern for monoclonal antibodies (mAbs) and other recombinant proteins (RPs) with pharmaceutical applications. Certain commercial purification modules, such as nanofiltration and low-pH inactivation, have been observed to reliably clear greater than 4 log(10) of large enveloped viruses, including endogenous retrovirus. The concept of "bracketed generic clearance" has been proposed for these steps if it could be prospectively demonstrated that viral log(10) reduction value (LRV) is not impacted by operating parameters that can vary, within a reasonable range, between commercial processes. In the case of low-pH inactivation, a common step in mAb purification processes employed after protein A affinity chromatography, these parameters would include pH, time and temperature of incubation, the content of salts, protein concentration, aggregates, impurities, model protein pI, and buffer composition. In this report, we define bracketed generic clearance conditions, using a prospectively defined bracket/matrix approach, where low-pH inactivation consistently achieves >or=4.6 log(10) clearance of xenotropic murine leukemia virus (X-MLV), a model for rodent endogenous retrovirus. The mechanism of retrovirus inactivation by low-pH treatment was also investigated.     

Development of a modular virus clearance package for anion exchange chromatography operated in weak partitioning mode

Anion exchange chromatography (AEX) operated under weak partitioning mode has been proven to be a powerful polishing step as well as a robust viral clearance step in Pfizer's monoclonal antibody (mAb) platform purification process. A multivariate design of experiment (DoE) study was conducted to understand the impact of operating parameters and feedstream impurity levels on viral clearance by weak partitioning mode AEX. Bacteriophage was used initially as a surrogate for neutral and acidic isoelectric point mammalian viruses (e.g., retrovirus and parvovirus). Five different mAbs were used in the evaluation of process parameters such as load challenge (both product and impurities), load pH, load conductivity, and contact time (bed height and flow‐rate). The operating ranges obtained from phage clearance studies and Pfizer's historical data were used to define an appropriate operating range for a subsequent clearance study with model retrovirus and parvovirus. Both phage and virus clearance evaluations included feedstreams containing different levels of impurities such as high molecular mass species (HMMS), host cell proteins (HCPs), and host cell DNA. For all the conditions tested, over 5 log₁₀ of clearance for both retrovirus and parvovirus was achieved. The results demonstrated that weak partitioning mode AEX chromatography is a robust step for viral clearance and has the potential to be included as part of the modular viral clearance approach. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:750–757, 2015     

Arginine-enveloped virus inactivation and potential mechanisms

Arginine synergistically inactivates enveloped viruses at a pH or temperature that does little harm to proteins, making it a desired process for therapeutic protein manufacturing. However, the mechanisms and optimal conditions for inactivation are not fully understood, and therefore, arginine viral inactivation is not used industrially. Optimal solution conditions for arginine viral inactivation found in the literature are high arginine concentrations (0.7–1 M), a time of 60 min, and a synergistic factor of high temperature (≥40°C), low pH (≤pH 4), or Tris buffer (5 mM). However, at optimal conditions full inactivation does not occur over all enveloped viruses. Enveloped viruses that are resistant to arginine often have increased protein stability or membrane stabilizing matrix proteins. Since arginine can interact with both proteins and lipids, interaction with either entity may be key to understanding the inactivation mechanism. Here, we propose three hypotheses for the mechanisms of arginine induced inactivation. Hypothesis 1 describes arginine-induced viral inactivation through inhibition of vital protein function. Hypothesis 2 describes how arginine destabilizes the viral membrane. Hypothesis 3 describes arginine forming pores in the virus membrane, accompanied by further viral damage from the synergistic factor. Once the mechanisms of arginine viral inactivation are understood, further enhancement by the addition of functional groups, charges, or additives may allow the inactivation of all enveloped viruses in mild conditions.     

Understanding mAb aggregation during low pH viral inactivation and subsequent neutralization

Monoclonal antibodies (mAbs) and related recombinant proteins continue to gain importance in the treatment of a great variety of diseases. Despite significant advances, their manufacturing can still present challenges owing to their molecular complexity and stringent regulations with respect to product purity, stability, safety, and so forth. In this context, protein aggregates are of particular concern due to their immunogenic potential. During manufacturing, mAbs routinely undergo acidic treatment to inactivate viral contamination, which can lead to their aggregation and thereby to product loss. To better understand the underlying mechanism so as to propose strategies to mitigate the issue, we systematically investigated the denaturation and aggregation of two mAbs at low pH as well as after neutralization. We observed that at low pH and low ionic strength, mAb surface hydrophobicity increased whereas molecular size remained constant. After neutralization of acidic mAb solutions, the fraction of monomeric mAb started to decrease accompanied by an increase on average mAb size. This indicates that electrostatic repulsion prevents denatured mAb molecules from aggregation under acidic pH and low ionic strength, whereas neutralization reduces this repulsion and coagulation initiates. Limiting denaturation at low pH by d -sorbitol addition or temperature reduction effectively improved monomer recovery after neutralization. Our findings might be used to develop innovative viral inactivation procedures during mAb manufacturing that result in higher product yields.     

Novel spiking methods developed for anion exchange chromatography operating in a continuous process

Many manufacturers of biopharmaceuticals are moving from batch to continuous processing. While this approach offers advantages over batch processing, demonstration of viral clearance for continuous processes is challenging. Fluctuating output from a continuous process chromatography column results in a nonhomogeneous load for the subsequent column and must be considered when designing viral clearance studies. One approach to clearance studies is to downscale the connected unit operations and introduce virus by in-line spiking. This is challenging to be implemented at the contract research organization performing the clearance study given the complexity of systems and level of expertise required. Alternately, each unit operation could be evaluated in traditional batch mode but the spiking and loading conditions be modified to mimic the variance introduced by the transition between two connected columns. Using a standard chromatography system, we evaluated a flow-through anion exchange chromatography step in a monoclonal antibody (mAb) manufacturing process using five different methods to introduce the virus to the column. Our data show that whether the virus or the mAbs were introduced in concentrated peaks, or as a homogeneous batch, the clearance of mouse minute virus was similar. This study introduces an alternative way to evaluate viral clearance in a continuous process and demonstrates the robustness of anion exchange chromatography unit operating in continuous processing.     

Low pH, caprylate incubation as a second viral inactivation step in the manufacture of albumin. Parametric and validation studies.

Caprylate has long been used as a stabiliser for albumin solutions, as well as a precipitation agent for immunoglobulins, ceruloplasmin and more recently in removing contaminants during albumin purification. Its virucidal properties have been explored and it has been proposed that the non-ionised form of the caprylate acid disrupts the integrity of the lipid bilayer and membrane associated proteins of enveloped viruses. The studies reported here further explore the use of this fatty acid to inactivate lipid-enveloped viruses in albumin manufactured for therapeutic use.Caprylate concentrations considered above solubility limits were adopted. Acidic pH was used to maximise the percentage of non-ionised caprylate and elevated temperatures were used to enhance inactivation rates. Parameters were manipulated to determine the relationship between pH, temperature and caprylate: protein ratio.These studies demonstrated that elevated temperature and low pH were critical in achieving significant reduction in virus infectivity and that the rate and extent of inactivation was sensitive to changes in caprylate:protein ratio and to changes in pH. Final inactivation conditions of 10% w/v protein, 16 mM caprylate, pH 4.5 and 30 degrees C were chosen to minimise protein dimerisation and to achieve greater than 4 log(10)inactivation of the most resistant virus tested, bovine viral diarrhoea virus.Validation studies using both model and relevant blood borne viruses demonstrated this to be a robust and effective viral inactivation step and is complementary to the commonly used pasteurisation viral inactivation step, thus providing an additional margin of safety to this valuable therapeutic blood product.     

Multiplex RT Q-PCR assay for simultaneous quantification of three viruses used for validation of virus clearance by biopharmaceutical production

Virus removal studies are used to insure the safety of biopharmaceutical products by quantitatively estimating the viral clearance capacity by the manufacturing process. Virus quantification assays are used to measure the log₁₀ clearance factor of individual purification unit operations in spike recovery studies. We have developed a multiplex RT Q-PCR assay that detects and quantifies three commonly used model viruses X-MuLV, SV40, and MMV simultaneously. This RT Q-PCR multiplex assay has a 6 log₁₀ dynamic range with a limit of detection (LOD) of ≈1 genome copy/μL. Amplification profiles are similar to existing singleplex assays. Overall, this RT Q-PCR multiplex assay is highly quantitative, accurately identifies multiple viruses simultaneously, and may prove useful to validate viral clearance of biological products in small scale studies.     

Enveloped virus inactivation by caprylate: a robust alternative to solvent-detergent treatment in plasma derived intermediates.

Solvent-detergent treatment, although used routinely in plasma product processing to inactivate enveloped viruses, substantially reduces product yield from the human plasma resource. To improve yields in plasma product manufacturing, a new viral reduction process has been developed using the fatty acid caprylate. As licensure of plasma products warrants thorough evaluation of pathogen reduction capabilities, the present study examined susceptibility of enveloped viruses to inactivation by caprylate in protein solutions with varied pH and temperature. In the immunoglobin-rich solutions from Cohn Fraction II+III, human immunodeficiency virus, Type-1, bovine viral diarrhea virus (BVDV), and pseudorabies virus were inactivated by caprylate concentrations of >/=9 mM, >/=12 mM, and >/=9 mM, respectively. Compared to solvent-detergent treatment, BVDV inactivation in Fraction II+III solution was significantly faster (20-60 fold) using 16 mM caprylate. Caprylate-mediated inactivation of BVDV was not noticeably affected by temperature within the range chosen manufacturing the immunoglobulin product. In Fraction II+III solutions, IgG solubility was unaffected by 相似文献