Pulsed Doppler ultrasound system for the measurement of velocity distributions and flow disturbances in arterial prostheses

For the investigation of flow through prosthetic arteries a pulsed Doppler ultrasound system has been characterized. Preliminary in vitro experiments using this system are described; they verify its suitability for making velocity profile and flow disturbance measurements. The output from a frequency tracker is compared with spectral analysis of Doppler signals for both laminar and turbulent flow regimes and the root mean square fluctuations on the tracker output signal are used to identify transition from laminar to turbulent flow. In addition, the turbulent itensity of poststenotic flow is quantified at several axial locations and for different rates of flow. Finally, we present velocity profile measurements which were obtained using a deconvolution technique to account for the finite size of the sample volume.     

Single cell analysis using surface enhanced Raman scattering (SERS) tags

Fluorescence is a mainstay of bioanalytical methods, offering sensitive and quantitative reporting, often in multiplexed or multiparameter assays. Perhaps the best example of the latter is flow cytometry, where instruments equipped with multiple lasers and detectors allow measurement of 15 or more different fluorophores simultaneously, but increases beyond this number are limited by the relatively broad emission spectra. Surface enhanced Raman scattering (SERS) from metal nanoparticles can produce signal intensities that rival fluorescence, but with narrower spectral features that allow a greater degree of multiplexing. We are developing nanoparticle SERS tags as well as Raman flow cytometers for multiparameter single cell analysis of suspension or adherent cells. SERS tags are based on plasmonically active nanoparticles (gold nanorods) whose plasmon resonance can be tuned to give optimal SERS signals at a desired excitation wavelength. Raman resonant compounds are adsorbed on the nanoparticles to confer a unique spectral fingerprint on each SERS tag, which are then encapsulated in a polymer coating for conjugation to antibodies or other targeting molecules. Raman flow cytometry employs a high resolution spectral flow cytometer capable of measuring the complete SERS spectra, as well as conventional flow cytometry measurements, from thousands of individual cells per minute. Automated spectral unmixing algorithms extract the contributions of each SERS tag from each cell to generate high content, multiparameter single cell population data. SERS-based cytometry is a powerful complement to conventional fluorescence-based cytometry. The narrow spectral features of the SERS signal enables more distinct probes to be measured in a smaller region of the optical spectrum with a single laser and detector, allowing for higher levels of multiplexing and multiparameter analysis.     

Ship Breaking and the Steel Industry in Bangladesh: A Material Flow Perspective

Bangladesh has emerged as a leading ship breaking nation. We conducted a material flow analysis of steel in Bangladesh with an emphasis on the ship breaking industry (SBI). The total aggregate domestic steel consumption in fiscal year (FY) 2010 was 2,930,000 tonnes (t) in Bangladesh; SBI met approximately 51% of the demand for raw materials and 37% of the demand for finished steel products. Rolling industries output in FY2010 was 1,451,000 t; 23% of the input for this production was from ship breaking sources. Dismantled ships also generate high‐quality reusable steel scraps. SBI was found to be the sole source of scraps for small rerolling industries in Bangladesh, and their output in 2008 more than doubled as compared to 2005. Larger rolling industries fulfilled their input needs for steel scraps by using both SBI and imported materials. We found a sharp increase in input imports during the global ship breaking recession in 2003–2007 and when Bangladesh's SBI faced a temporary ban in 2010. Induction furnaces in Bangladesh in FY2010 produced a total of 787,000 t of billets; more than 40% was from ship‐sourced scraps. In 2008, the country's steel consumption was 3,220,000 t, that is, 22 kilograms per person, and the intensity of steel use was 40 grams per U.S. dollar, which was much higher than that of other developing countries with a similar per capita gross domestic product (GDP). The country exhibited a high level of steel consumption relative to its GDP, which is indicative of the contribution of SBI.     

Evaluation of laser-Doppler flowmetry as a measure of tissue blood flow

In this study the technique of laser-Doppler flowmetry was evaluated for the measurement of tissue blood flow by comparing laser-Doppler flow (LDF) signal in the renal cortex, gracilis muscle, and cremaster muscle of anesthetized rats to whole-organ blood flow measured with an electromagnetic flowmeter or radioactive microspheres. In vitro, LDF signal was closely correlated (r = 0.99) to changes in erythrocyte velocity generated with a rotating wheel. Although individual LDF readings varied in situ, mean LDF signal calculated from multiple readings on the tissue surface were significantly correlated (r = 0.74-0.95) with tissue blood flows measured at various perfusion pressures. However, significant differences in the slope of the LDF signal vs. blood flow relationship were observed in different tissues and with different methods of measurement in the same tissue. This study indicates that mean laser-Doppler flow signal provides a good estimate of tissue blood flow, provided a sufficient number of points is scanned. However, there appears to be no universal calibration factor for the method.     

Chronic measurement, using a Doppler probe, of uterine artery flow in the gravid guinea-pig

A chronic animal model is described which permits for the first time the continuous measurement of uterine artery blood flow velocity in the pregnant guinea-pig by using a miniaturized Doppler flow probe. Preliminary validation revealed that alterations in actual blood flow are directly and proportionally related to the change in the Doppler shift (r = 0.984) from 0 to 100 ml/h. The velocity signal baseline was as stable as that of systemic blood pressure. Depending upon the individual animal's flow velocity, a deviation of 2-5% from baseline was statistically significant. With experience, greater than 90% of preparations were successful and a 30-day interval was often available for study. Uterine artery flow velocity increased steadily between 45 and 55 days of gestation. Instrumentation did not result in fetal growth retardation. A reduction in flow velocity occurred during general anaesthesia using ketamine and the antianxietal xylazine. In agreement with the reports of other investigators using a different model, both hydralazine and angiotensin II increased uterine blood velocity and adrenaline reduced it.     

搭桥冠脉内超声多普勒血流信号的仿真分析

为研究搭桥冠脉内血流状况与移植管结构因素的关系,采用基于计算流体动力学模型的信号仿真方法合成不同缝合角度、不同缝合距离的搭桥冠脉内的超声多普勒血流信号,并分析其频谱随两个结构因素变化的规律。结果表明:缝合角度越小,缝合前端及下游仿真信号的频谱宽度越小,说明搭桥手术的效果越好;缝合位置距离狭窄越近,缝合后端附近血流信号的频谱宽度越大,缝合前端及下游的频谱宽度则越小,说明手术应折中选取缝合位置。结论与血液动力学研究结果一致,可以为手术方案的设计和术后效果的监测提供参考。     

Nontraumatic aortic blood flow sensing by use of an ultrasonic esophageal probe.

The measurement of blood velocity fields, volume flow, and arterial wall motion in the descending thoracic aorta provides essential hemodynamic information for both research and clinical diagnosis. The close proximity of the esophagus to the aorta in the dog makes it possible to obtain such data nonsurgically using an ultrasonic esophageal probe; however, the accuracy of such a probe is limited if the angle between the sound beam and the flow axis, known as the Doppler angle, is not precisely known. By use of a pulsed Doppler velocity meter (PUDVM) and a triangulation procedure, accurate empirical measurement of the Doppler angle has been obtained, allowing quantification of blood velocity scans across the aorta. Volume flow is obtained by integration of blood velocity profiles and arterial wall motion is measured with an ultrasonic echo tracking device. Accuracy of the probe was substantiated by comparison with ultrasonic and electromagnetic implanted flow cuff measurements. Use of the probe in measurement of blood velocity, volume flow and arterial wall motion at various locations along the 8- and 10-cm length of the descending thoracic aorta in adult beagle dogs is detailed. The simplicity, accuracy, and nontraumatic aspect of the technique should allow increasing use of such a probe in numerous research and clinical applications.     

Some characteristics of laminar flow velocity spectra detected by a 20 MHz pulsed ultrasound Doppler

For the purpose of improving accuracy of noninvasive flow measurements in small (1–2 mm diameter) blood vessels, an existing 20 MHz pulsed ultrasound Doppler velocimeter (PUDVM) has been augmented to allow fast Fourier transformation (FFT) of its Doppler shift signal. The modified instrument was used to collect velocity spectra for a benchtop test section delivering precise Poiseuille flows at velocities in the range of physiological interest. The velocity spectra demonstrated a substantial degree of broadening, much of which was attributable to the geometry of the finite sample volume size. Several spectral indices were studied as a function of flow field variables. Results showed that the intensity-weighted mean Doppler shift frequency, when converted to its corresponding velocity v_M, agreed very closely with the theoretically predicted local fluid velocity. Measurement linearity and repeatability were evaluated for a number of system variables, indicating that FFT performance was essentially unaffected by several parameters capable of causing major degradation of (phasic) Doppler shift signals produced by conventional zero-crossing-counter circuitry. As presently configured, the augmented PUDVM instrument is fully capable of detailed flow field mapping in small subcutaneous vessels such as human digital arteries.     

Autocorrelation analysis of hydrophobic ion current noise in lipid bilayer membranes.

The autocorrelation function of a given process is related to its spectral density by the Wiener-Khintchine theorem, and both expressions contain the same information. We report here a measurement of the current noise produced in a lipid bilayer membrane doped with hydrophobic anions of dipicrylamine. The results are in good agreement both with relaxation measurements on the same membrane and with an analysis of the spectral density of the current noise for this system which has been presented by other workers. Although measurement of the spectral density function is generally more complete for technical reasons, the autocorrelation function provides, for the case studied here, more physical insight into the underlying charge transport mechanism. We find that the measured autocorrelation function is negative at short, but nonzero, times. This is a consequence of the operative conductance mechanism in this case, which cannot carry current continuously in the same direction without compensatory reverse flow.     

Doppler Optical Coherence Tomography of Retinal Circulation

Noncontact retinal blood flow measurements are performed with a Fourier domain optical coherence tomography (OCT) system using a circumpapillary double circular scan (CDCS) that scans around the optic nerve head at 3.40 mm and 3.75 mm diameters. The double concentric circles are performed 6 times consecutively over 2 sec. The CDCS scan is saved with Doppler shift information from which flow can be calculated. The standard clinical protocol calls for 3 CDCS scans made with the OCT beam passing through the superonasal edge of the pupil and 3 CDCS scan through the inferonal pupil. This double-angle protocol ensures that acceptable Doppler angle is obtained on each retinal branch vessel in at least 1 scan. The CDCS scan data, a 3-dimensional volumetric OCT scan of the optic disc scan, and a color photograph of the optic disc are used together to obtain retinal blood flow measurement on an eye. We have developed a blood flow measurement software called "Doppler optical coherence tomography of retinal circulation" (DOCTORC). This semi-automated software is used to measure total retinal blood flow, vessel cross section area, and average blood velocity. The flow of each vessel is calculated from the Doppler shift in the vessel cross-sectional area and the Doppler angle between the vessel and the OCT beam. Total retinal blood flow measurement is summed from the veins around the optic disc. The results obtained at our Doppler OCT reading center showed good reproducibility between graders and methods (<10%). Total retinal blood flow could be useful in the management of glaucoma, other retinal diseases, and retinal diseases. In glaucoma patients, OCT retinal blood flow measurement was highly correlated with visual field loss (R²>0.57 with visual field pattern deviation). Doppler OCT is a new method to perform rapid, noncontact, and repeatable measurement of total retinal blood flow using widely available Fourier-domain OCT instrumentation. This new technology may improve the practicality of making these measurements in clinical studies and routine clinical practice.     

左室心功能综合指数的全自动评估

目的探讨一种采用计算机处理医学信号的方法,实现利用计算机,对超声血流声谱图自动测量,以及Tei指数的计算,评价采用计算机获得心指数方法的性能。方法由图像的方式获得二尖瓣和主动脉瓣处的血流声谱图,利用图像形态学处理的方法和工程数学的方法计算出Tei指数的值。结果采集30个病人信息,与医生手工测量结果比较,结论采用计算机直接测量心指数的方法,方便,快捷,与医生手工比较能较为准确的反映实际心功能的情况。     

Dynamic evaluation of blood flow microcirculation by combined use of the laser Doppler flowmetry and high‐speed videocapillaroscopy methods

The dynamic light scattering methods are widely used in biomedical diagnostics involving evaluation of blood flow. However, there exist some difficulties in quantitative interpretation of backscattered light signals from the viewpoint of diagnostic information. This study considers the application of the high‐speed videocapillaroscopy (VCS) method that provides the direct measurement of the red blood cells (RBCs) velocity into a capillary. The VCS signal presents true oscillation nature of backscattered light caused by moving RBCs. Thus, the VCS signal can be assigned as a reference one with respect to more complicated signals like in laser Doppler flowmetry (LDF). An essential correlation between blood flow velocity oscillations in a separate human capillary and the integral perfusion estimate obtained by the LDF method has been found. The observation of blood flow by the VCS method during upper arm occlusion has shown emergence of the reverse blood flow effect in capillaries that corresponds to the biological zero signal in the LDF. The reverse blood flow effect has to be taken into account in interpretation of LDF signals.      

Study of plasma fluctuations in the Tuman-3m tokamak using microwave reflectometry with an obliquely incident probing beam

Plasma fluctuations in the Tuman-3M tokamak are studied experimentally by analyzing backscattered radiation for different angles of incidence of the probing beam from the normal to the cut-off surface. The poloidal rotation velocity of the plasma fluctuations is determined from the Doppler shift of the reflected radiation spectrum measured on the edge of the tokamak during the transition to the H-mode. It is shown that, before the transition to the H-mode, the rotation velocity can be estimated quantitatively from the spectral shift or from the rate at which the phase of the reflected signal grows. The experimental data obtained during the transition to the H-mode provide evidence for the onset of a sheared poloidal flow. The shear makes it difficult to correctly estimate the poloidal rotation velocity in the improved confinement regime. The main mechanisms responsible for the broadening of the backscattered radiation spectra are considered. The turbulent diffusion coefficients determined under the assumption that the spectral broadening is diffusive in character are found to be close to those determined from the charged-particle balance.     

Dual-fiber laser Doppler velocimeter and its application to the measurements of coronary blood velocity

To obtain a smaller sample volume and a suitable sample position for the measurement of blood velocity, we fabricated a laser Doppler velocimeter (LDV) with a dual-fiber pickup. The two fibers (clad: 62.5 micron and core: 50 micron) were placed side by side. An He-Ne laser was introduced into the blood through one fiber and the backscattered light was collected by the other fiber. The Doppler signal was analyzed by a spectrum analyzer. The spectrum of the Doppler shift frequency showed a sharp peaked pattern for both forward and reverse flows and exhibited an excellent correlation with the known blood velocity. The blood velocity in the poststenotic portion of canine coronary artery was successfully measured by the dual-fiber LDV. These results indicate that the dual-fiber LDV is useful for measuring blood velocity accurately with a small sample volume even in disturbed flow fields.     

Near-bottom performance of the Acoustic Doppler Velocimeter (ADV) – a comparative study

In a laboratory flume, a comparative study on the near-bottom performance of the Acoustic Doppler Velocimeter (ADV) was conducted. Two different ADV systems were tested for different configurations and two flow velocities (9 cm s⁻¹, 18 cm s⁻¹). The results were compared with synchronous measurements with a Laser Doppler Anemometer (LDA). Near-bottom velocity measurements with the ADV have to be interpreted carefully as the ADV technique underestimates flow velocities in a zone close to the sediment. The height of this zone above the sediment varies with different ADV systems and configurations. The values for nominal sampling volume height (SVH) given by the software often underestimate the true, effective sampling volume heights. Smaller nominal SVH improve the ADV near-bottom performance, but the vertical extent of the zone in which the ADV underestimates flow by more than 20% may be larger than true SVH/2 by a factor of 2 (=true SVH). When the measurement volume approaches the bottom, ADV data quality parameters (signal-to-noise-ratio (SNR) and signal amplitude) exceeding the average ‘open water’ level, are clear indicators that the ADV has begun to underestimate the flow velocity. Unfortunately, this is not a safe indicator for the range of reliable measurements as the ADV may begin to underestimate velocities even with unchanged ‘open water’ data quality parameters. Thus, one can only recommend avoiding measurements below a distance from the bottom that was defined empirically comparing the ADV and the LDA velocity profiles. This distance is 2.5 times nominal sampling volume height for the tested ADV systems and experimental settings.     

Biophoton emission of a lichen species Parmelia tinctorum

The properties of biophoton signals emitted by samples of lichen species P. tinctorum are investigated. The shape of a light induced signal is determined from 5 ms onwards using successively the bin resolution of 1, 10 and 100 ms; 1000 measurements in successive bins are made at each resolution. The measurement of the shape is repeated at various temperatures in the range (1 degree-40 degrees C) in steps of 1 degree C. It is found that a biophoton signal is very sensitive to temperature and different portions of the signal show different sensitivity. The temperature dependence of the decaying part is even qualitatively different from that of the non-decaying part. The signal responds to temperature changes of 0.1 degrees C in less than 1 ms. The effect of monochromatic stimulation on the strengths of the signal and its red, blue and green spectral components are determined in the wavelength range (400-700) nm in steps of 10 nm. The signal and its broad spectral components have similar excitation curves. The relative strength of spectral component appears independent of the stimulating wavelength. The shape of the decaying portion of the signal and its red, blue and green components is also determined. The character of decay in all four cases is non-exponential. The measurements with various interference filters spanning the entire visible region are made with the bin size of 20 s. These measurements are qualitative because of large fluctuations but suggest that the spectral components of a biophoton signal are distributed in the entire visible region. The probabilities of detecting different number of photons in the non-decaying portion are determined by making 30,000 measurements in each set with the bin size of 50, 100, 200, 300, 400, 500 and 700 ms. The probabilities determine the parameters of a squeezed state of light--the magnitude of its displacement parameter is different but the phase of its displacement parameter and its squeezing parameter are same for different sizes of a bin. These measurements further indicate that the average signal strength remains constant for 19 hr.     

A new approach for the evaluation of the severity of coarctation of the aorta using Doppler velocity index and effective orifice area: in vitro validation and clinical implications

Early detection and accurate estimation of COA severity are the most important predictors of successful long-term outcome. However, current clinical parameters used for the evaluation of the severity of COA have several limitations and are flow dependent. The objectives of this study are to evaluate the limitations of current existing parameters for the evaluation of the severity of coarctation of the aorta (COA) and suggest two new parameters: COA Doppler velocity index and COA effective orifice area. Three different severities of COAs were tested in a mock flow circulation model under various flow conditions and in the presence of normal and stenotic aortic valves. Catheter trans-COA pressure gradients and Doppler echocardiographic trans-COA pressure gradients were evaluated. COA Doppler velocity index was defined as the ratio of pre-COA to post-COA peak velocities measured by Doppler echocardiography. COA Doppler effective orifice area was determined using continuity equation. The results show that peak-to-peak trans-COA pressure gradient significantly increased with flow rate (from 83% to 85%). Peak Doppler pressure gradient also significantly increased with flow rate (80-85%). A stenotic or bicuspid aortic valve increased peak Doppler pressure gradient by 20-50% for a COA severity of 75%. Both COA Doppler velocity index and COA effective orifice area did not demonstrate significant flow dependence or dependence upon aortic valve condition. As a conclusion, COA Doppler velocity index and COA effective orifice area are flow independent and do not depend on aortic valve conditions. They can, then, more accurately predict the severity of COA.     

The influence of vessel wall elasticity and peripheral resistance on the carotid artery flow wave form: a CFD model compared to in vivo ultrasound measurements

The Doppler flow wave form and its derived measures such as the pulsatility index provide clinically important tools for the investigation of arterial disease. The typical shape of Doppler flow wave forms is physiologically known to be largely determined by both peripheral resistance and elastic properties of the arterial wall. In the present study we systematically investigate the influence of both vessel wall elasticity and peripheral resistance on the flow wave form obtained from a CFD-simulation of blood flow in the carotid bifurcation. Numerical results are compared to in vivo ultrasound measurements. The in vivo measurement provides a realistic geometry, local elasticities and an input flow wave form for the numerical experiment. Numerical and experimental results are compared at three different sites in the carotid branches. Peripheral resistance has a profoundly decreasing effect on velocities in the external carotid artery. If elasticity is taken into account, the computed peak systolic velocities are considerably lower and a more realistic smoothing of the flow wave form is found. Together, the results indicate that only if both vessel wall elasticity and positive peripheral resistance are taken into account, experimentally obtained Doppler flow wave forms can be reproduced numerically.     

Hyperspectral imaging system using acousto-optic tunable filter for flow cytometry applications.

A major advantage of flow cytometry is its flexible and open instrument configuration, which is highly suitable for systems integration. This flexibility permits the coupling of auxiliary instrumentation that may offer the measurement of parameters other than those typically measured by this multiparameter measurement technique. On the basis of this advantage, we explore the principle and application of hyperspectral imaging (HSI), which has the potential to be a useful add-on feature to flow cytometry applications. Application of HSI to flow cytometry involves the acquisition of spatial information and rendering it in spectral form. In this work, we describe the development and application of an HSI system which provides both spectral and spatial information. Spectral information was generated by obtaining an entire spectrum of a single sample site within a wavelength region of interest, while spatial information was generated by recording a two-dimensional (2D) image of an area of the sample of interest at one specific wavelength. HSI is a promising additional feature to flow cytometry since it can provide both spatial (image format) and spectral information in addition to the multiparameter information already available from flow cytometry measurements.     

Adaptive wavelet analysis of oscillations in the human peripheral blood flow

The main principles are outlined for spectral timing analysis of the peripheral blood flow oscillations obtained by laser Doppler flowmetry. The oscillations can be studied in a wide frequency range both in stationary and nonstationary conditions during functional tests. The potential of the method has been demonstrated in experiments with the reaction of the microvascular bed to transcutaneous iontophoretic introduction of acetylcholine chloride. The major advantage of the method over conventional wavelet analysis is a significant increase in the “effective” length of the signal analyzed, which allows correct analysis of low-frequency components in much shorter LDF recordings than those commonly used.