Postexcision transposition of the transposon Tn10 in Escherichia coli K12

An experimental analysis of the fate of transposon Tn10 after excision from a proA::Tn10 site localized on the plasmid F' leads to the conclusions: 1. The precise excision is a progressive process. Its probability is estimated per time unit. 2. An excised Tn10 is always integrated into a different genetic locus. 2. An excised Tn10 is always integrated into a different genetic locus. 3. The kinetics of postexcision transposition are sometimes very slow. The excised transposon is inherited in one cell line in spite of cell multiplication. 4. The processes of excision and secondary insertion have no absolute requirement for the recA+ genotype but they are strongly enhanced in recA+ cells. 5. The kinetics of postexcision transposition are strongly dependent on the genetic site from which the transposon was excised. 6. The probability of postexcision transposition is fully determined by the probability of excision and depends on the genotype of the host and many other factors.     

A system of transposon mutagenesis for bacteriophage T4

We have developed a system of transposon mutagenesis for bacteriophage T4. The transposon is a plasmid derivative of Tn5 which contains the essential T4 gene 24, permitting a direct selection for transposition events into a gene 24-deleted phage. The transposition occurred at a frequency of only 10(-7) per progeny phage, even though a dam- host was used to increase transposition frequency. Phage strains with a transposon insert were distinguished from most pseudorevertants of the gene 24 deletion by plaque hybridization using a transposon-specific probe. Mapping analysis showed that the transposon inserts into a large number of sites in the T4 genome, probably with a preference for certain regions. The transposon insertions in four strains were analysed by DNA sequencing using primers that hybridize to each end of the transposon and read out into the T4 genome. In each case, a 9 bp T4 target sequence had been duplicated and the insertions had occurred exactly at the IS50 ends of the transposon, demonstrating that bona fide transposition had occurred. Finally, the transposon insert strains were screened on the TabG Escherichia coli strain, which inhibits the growth of T4 motA mutants, and a motA transposon insert strain was found.     

Integration of plasmids into E. coli K12 chromosomes, caused by a Bordetella transposon

Transposition of Bordetella pertussis transposon in E. coli chromosome has been studied on a model of exclusion of donor multicopy pKK3 plasmid with coumermicin. TnBP3 induced the formation of co-integrates between the plasmid and chromosome. The structure of co-integrate was determined. Facts of exclusion of integrated structure and transposon transposition within integrated plasmid into new sites on a recipient chromosome were detected. Relationship between these processes and activity of bacterial cell recombination system has been determined.     

Genetic organization of the bacterial conjugative transposon Tn916.

Tn916, which encodes resistance to tetracycline, is a 16.4-kilobase conjugative transposon originally identified on the chromosome of Streptococcus faecalis DS16. The transposon has been cloned in Escherichia coli on plasmid vectors, where it expresses tetracycline resistance; it can be reintroduced into S. faecalis via protoplast transformation. We have used a lambda::Tn5 bacteriophage delivery system to introduce Tn5 into numerous sites within Tn916. The Tn5 insertions had various effects on the behavior of Tn916. Some insertions eliminated conjugative transposition but not intracellular transposition, and others eliminated an excision step believed to be essential for both types of transposition. A few inserts had no effect on transposon behavior. Functions were mapped to specific regions on the transposon.     

Molecular cloning into Tn5 and integration in the Pseudomonas aeruginosa chromosome: a tool for heterologous gene expression

The DNA primase gene of the promiscuous IncP-1 conjugative plasmid RP1, encoding two polypeptides of 118 and 80 kDa, was inserted into the transposon Tn5 in Escherichia coli. The derivative transposon, Tn2523, was then transposed to a temperature-sensitive replication mutant of the promiscuous IncP-1 conjugative plasmid R68 at permissive temperature and the plasmid transferred to Pseudomonas aeruginosa strain PAO. The latter strain was then grown at non-permissive temperature to identify transposition of Tn2523 into the P. aeruginosa chromosome. Immunological and enzymic analysis showed the expression of functional primase polypeptides in the constructed P. aeruginosa strain. This strain also restored wild-type conjugational transfer proficiency, by complementation, to mutants of the IncP-1 plasmid R18 affected in transfer from P. aeruginosa to P. stutzeri or to Acinetobacter calcoaceticus due to transposon Tn7 insertion mutations in the primase gene. This strategy of cloning into a transposon and integration into the bacterial chromosome should facilitate genetic manipulation and studies of gene expression in a range of Gram-negative bacteria.     

ISPpy1, a novel mobile element of the ancient Psychrobacter maritimus permafrost strain: translocations in Escherichia coli K-12 cells and formation of composite transposons

It was shown that IS element ISPpyl isolated earlier in the permafrost strain Psychrobacter maritimus MR29-12 has a high level of functional activity in cells of the heterologous host Escherichia coli K-12. ISPpyl can be translocated in E. coli cells by itself and mobilize adjacent genes and can also form composite transposons flanked by two copies of this element. Apart from translocations between different plasmids, the composite ISPpyl-containing transposon Tn5080a is capable of translocation from the plasmid into the E. coli chromosome with high frequency and from the chromosome into the plasmid. Among products of Tn5080a transposition into plasmid R388, simple insertions were predominantly formed together with cointegrates. Upon mobilization of adjacent genes with the use of one ISPpyl copy, only cointegrates arise.     

The role of tandem IS dimers in IS911 transposition

Using a combined in vivo and in vitro approach, we demonstrated that the transposition products generated by IS911 from a dimeric donor plasmid are different from those generated from a plasmid monomer. When carried by a monomeric plasmid donor, free IS911 transposon circles are generated by intra-IS recombination in which one IS end undergoes attack by the other. These represent transposition intermediates that undergo integration using the abutted left (IRL) and right (IRR) ends of the element, the active IRR-IRL junction, to generate simple insertions. In contrast, the two IS911 copies carried by a dimeric donor plasmid not only underwent intra-IS recombination to generate transposon circles but additionally participated in inter-IS recombination. This also creates an active IRR-IRL junction by generating a head-to-tail IS tandem dimer ([IS]2) in which one of the original plasmid backbone copies is eliminated in the formation of the junction. Both transposon circles and IS tandem dimers are generated from an intermediate in which two transposon ends are retained by a single strand joint to generate a figure 8 molecule. Inter-IS figure 8 molecules generated in vitro could be resolved into the [IS]2 form following introduction into a host strain by transformation. Resolution did not require IS911 transposase. The [IS]2 structure was stable in the absence of transposase but was highly unstable in its presence both in vivo and in vitro. Previous studies had demonstrated that the IRR-IRL junction promotes efficient intermolecular integration and intramolecular deletions both in vivo and in vitro. Integration of the [IS]2 derivative would result in a product that resembles a co-integrate structure. It is also shown here that the IRR-IRL junction of the [IS]2 form and derivative structures can specifically target one of the other ends in an intramolecular transposition reaction to generate transposon circles in vitro. These results not only demonstrate that IS911 (and presumably other members of the IS3 family) is capable of generating a range of transposition products, it also provides a mechanistic framework which explains the formation and activity of such structures previously observed for several other unrelated IS elements. This behaviour is probably characteristic of a large number of IS elements.     

Low target site specificity of an IS6100-based mini-transposon, Tn1792, developed for transposon mutagenesis of antibiotic-producing Streptomyces

To improve transposon mutagenesis of antibiotic-producing Streptomyces, a mini-transposon, Tn1792, was constructed, based on IS6100, originally isolated from Mycobacterium fortuitum. Easily manageable transposition assays were developed to demonstrate inducible transposition of Tn1792 into the Streptomyces genome from a temperature-sensitive delivery plasmid. Introduction of the selectable aac1 gene between the inverted repeats in Tn1792 allowed for both reliable identification of transposition events in Streptomyces, and also subsequent cloning of transposon-tagged sequences in Escherichia coli. This enabled the target site specificity of Tn1792 to be determined at nucleotide resolution, revealing no significant shared homology between different target sites. Consequently, Tn1792 is well suited for random mutagenesis of Streptomyces.     

In vitro transposition of ISY100, a bacterial insertion sequence belonging to the Tc1/mariner family

The Synechocystis sp. PCC6803 insertion sequence ISY100 (ISTcSa) belongs to the Tc1/mariner/IS630 family of transposable elements. ISY100 transposase was purified and shown to promote transposition in vitro. Transposase binds specifically to ISY100 terminal inverted repeat sequences via an N-terminal DNA-binding domain containing two helix-turn-helix motifs. Transposase is the only protein required for excision and integration of ISY100. Transposase made double-strand breaks on a supercoiled DNA molecule containing a mini-ISY100 transposon, cleaving exactly at the transposon 3' ends and two nucleotides inside the 5' ends. Cleavage of short linear substrates containing a single transposon end was less precise. Transposase also catalysed strand transfer, covalently joining the transposon 3' end to the target DNA. When a donor plasmid carrying a mini-ISY100 was incubated with a target plasmid and transposase, the most common products were insertions of one transposon end into the target DNA, but insertions of both ends at a single target site could be recovered after transformation into Escherichia coli. Insertions were almost exclusively into TA dinucleotides, and the target TA was duplicated on insertion. Our results demonstrate that there are no fundamental differences between the transposition mechanisms of IS630 family elements in bacteria and Tc1/mariner elements in higher eukaryotes.     

Intramolecular transposition and inversion in plasmid R6K

Selection was made in Escherichia coli K-12 recA hosts carrying plasmid R6K for ampicillin hyperresistance. Twenty-two selected strains were found to carry mutant plasmids, which, from electron microscopy and restriction enzyme analysis, were concluded to arise by a duplication of transposon Tn2660, which confers ampicillin resistance, in all cases the duplicate transposon being in an inverted orientation with respect to the resident Tn2660. A mutant of R6K, pSJC301, which was temperature sensitive for ampicillin resistance was produced by in vitro hydroxylamine treatment of R6K deoxyribonucleic acid. A plasmid hybrid, pSJC102, was constructed by cloning the EcoRI R6K fragment carrying the wild-type beta-lactamase gene into the EcoRI site of ColE1. pSJC301 and pSJC102 were transformed into the same recA host strain to form a stable biplasmid strain. Ampicillin-hyperresistant mutants were selected from this strain and screened for plasmids with a duplication of transposon Tn2660, which occurred with equal frequency in either pSJC301 or pSJC102; of 12 characterized, all were inverse repeats of the resident transposon. All six Tn2660 inserts into pSJC301 determined temperature-sensitive ampicillin resistance, and all six inserts into pSJC102 determined wild-type ampicillin resistance, from which it was inferred that transposition of a duplicate Tn2660 occurs predominantly as an intramolecular event, at least in the multicopy R6K plasmid. In all 28 insertion mutants of R6K, there was an inversion of the deoxyribonucleic acid between the two transposons, whereas in only one of six insertion mutants of pSJC102, inversion had occurred. These results are discussed in terms of current models of transposition.     

Site-directed and transposon-mediated mutagenesis with pfd-plasmids by electroporation of Erwinia amylovora and Escherichia coli cells.

The suicide plasmid pfdA31-Tn5 was constructed to mutagenize Erwinia amylovora and Escherichia coli strains by electorporation. This vector carries the bacteriophage fd replication origin, a beta-lactamase gene and the transposon Tn5. For propagation the plasmid depends on host cells producing fd gene-2 protein. Electroporation of E.amylovora or E.coli cells with plasmid pfdA31-Tn5 yielded more than 10(4) transposition events per micrograms DNA. We have produced and characterized transposon mutants of E.amylovora affecting either galactose metabolism or the synthesis of the phytotoxin (L)-2,5-dihydrophenylalanine. A Tn5-insertion in a gene, involved in exopolysaccharide synthesis of E.amylovora strain Ea7/74, was subcloned into vector pfdA31 and used to mutagenize E.amylovora strain Ea1/79 by site-directed recombination.     

Subunit-specific phenotypes of Salmonella typhimurium HU mutants.

Salmonella hupA and hupB mutants were studied to determine the reasons for the high degree of conservation in HU structure in bacteria. We found one HU-1-specific effect; the F'128 plasmid was 25-fold less stable in hupB compared with hupA or wild-type cells. F' plasmids were 120-fold more unstable in hupA hupB double mutants compared with wild-type cells, and the double mutant also had a significant alteration in plasmid DNA structure. pBR322 DNA isolated from hupA hupB strains was deficient in supercoiling by 10 to 15% compared with wild-type cells, and the topoisomer distribution was significantly more heterogeneous than in wild-type or single-mutant strains. Other systems altered by HU inactivation included flagellar phase variation and phage Mu transposition. However, Mu transposition rates were only about fourfold lower in Salmonella HU double mutants. One reason that Salmonella HU double mutants may be less defective for Mu transposition than E. coli is the synthesis in double mutants of a new, small, basic heat-stable protein, which might partially compensate for the loss of HU. The results indicate that although either HU-1 or HU-2 subunit alone may accommodate the cellular need for general chromosomal organization, the selective pressure to conserve HU-1 and HU-2 structure during evolution could involve specialized roles of the individual subunits.     

Counterselection and Co-Delivery of Transposon and Transposase Functions for <Emphasis Type="Italic">Sleeping Beauty</Emphasis>-Mediated Transposition in Cultured Mammalian Cells

Sleeping Beauty (SB) is a gene-insertion system reconstructed from transposon sequences found in teleost fish and is capable of mediating the transposition of DNA sequences from transfected plasmids into the chromosomes of vertebrate cell populations. The SB system consists of a transposon, made up of a gene of interest flanked by transposon inverted repeats, and a source of transposase. Here we carried out a series of studies to further characterize SB-mediated transposition as a tool for gene transfer to chromosomes and ultimately for human gene therapy. Transfection of mouse 3T3 cells, HeLa cells, and human A549 lung carcinoma cells with a transposon containing the neomycin phosphotransferase (NEO) gene resulted in a several-fold increase in drug-resistant colony formation when co-transfected with a plasmid expressing the SB transposase. A transposon containing a methotrexate-resistant dihydrofolate reductase gene was also found to confer an increased frequency of methotrexate-resistant colony formation when co-transfected with SB transposase-encoding plasmid. A plasmid containing a herpes simplex virus thymidine kinase gene as well as a transposon containing a NEO gene was used for counterselection against random recombinants (NEO+TK+) in medium containing G418 plus ganciclovir. Effective counterselection required a recovery period of 5 days after transfection before shifting into medium containing ganciclovir to allow time for transiently expressed thymidine kinase activity to subside in cells not stably transfected. Southern analysis of clonal isolates indicated a shift from random recombination events toward transposition events when clones were isolated in medium containing ganciclovir as well as G418. We found that including both transposon and transposase functions on the same plasmid substantially increased the stable gene transfer frequency in Huh7 human hepatoma cells. The results from these experiments contribute technical and conceptual insight into the process of transposition in mammalian cells, and into the optimal provision of transposon and transposase functions that may be applicable to gene therapy studies.     

Transformation of Mycoplasma pulmonis and Mycoplasma hyorhinis: transposition of Tn916 and formation of cointegrate structures

A procedure for transformation of the murine pathogen Mycoplasma pulmonis with plasmid pAM120 was developed. This plasmid replicates in Escherichia coli and contains the gram-positive transposon Tn916. The transformation protocol also proved effective for the swine pathogen Mycoplasma hyorhinis. The tetracycline resistance determinant of Tn916 was expressed in transformed myocoplasma cells, and Tn916 was found inserted into numerous sites in the recipient chromosomes of M. pulmonis and M. hyorhinis, indicating that transposition had occurred. Interestingly, some transformants of M. pulmonis and M. hyorhinis contained cointegrate structures which apparently had a complete copy of the entire donor plasmid (pAM120) inserted into the recipient chromosome. Subsequent transposition of inserted Tn916 was observed in passaged clones of transformed M. pulmonis.     

Formation of recombinants of F' plasmids in recombination-defective E. coli cells and their properties]

As a result of mating of cells carrying plasmid F' lac with cells carrying plasmid F'his merodiploids carrying plasmid complex F'lacF'his were isolated. The plasmid genes of the isolated merodiploids are donated together into the recipient cells and are eliminated jointly from host-cells both spontaneously and by acridine orange. As the formation of the plasmid complex took place in E. coli cells carrying mutation in rec A gene the recombination of plasmids F' is supposed to take place in the absence of the product of gene rec. A.     

Direct selection of IS903 transposon insertions by use of a broad-host-range vector: isolation of catalase-deficient mutants of Actinobacillus actinomycetemcomitans

Transposon mutagenesis in bacteria generally requires efficient delivery of a transposon suicide vector to allow the selection of relatively infrequent transposition events. We have developed an IS903-based transposon mutagenesis system for diverse gram-negative bacteria that is not limited by transfer efficiency. The transposon, IS903phikan, carries a cryptic kan gene, which can be expressed only after successful transposition. This allows the stable introduction of the transposon delivery vector into the host. Generation of insertion mutants is then limited only by the frequency of transposition. IS903phikan was placed on an IncQ plasmid vector with the transposase gene located outside the transposon and expressed from isopropyl-beta-D-thiogalactopyranoside (IPTG)-inducible promoters. After transposase induction, IS903phikan insertion mutants were readily selected in Escherichia coli by their resistance to kanamycin. We used IS903phikan to isolate three catalase-deficient mutants of the periodontal pathogen Actinobacillus actinomycetemcomitans from a library of random insertions. The mutants display increased sensitivity to hydrogen peroxide, and all have IS903phikan insertions within an open reading frame whose predicted product is closely related to other bacterial catalases. Nucleotide sequence analysis of the catalase gene (designated katA) and flanking intergenic regions also revealed several occurrences of an 11-bp sequence that is closely related to the core DNA uptake signal sequence for natural transformation of Haemophilus influenzae. Our results demonstrate the utility of the IS903phikan mutagenesis system for the study of A. actinomycetemcomitans. Because IS903phikan is carried on a mobilizable, broad-host-range IncQ plasmid, this system is potentially useful in a variety of bacterial species.     

THE EVOLUTION OF TRANSPOSABLE ELEMENTS: CONDITIONS FOR ESTABLISHMENT IN BACTERIAL POPULATIONS

Previous theoretical studies have shown that bacterial transposons can become established in populations by infectious transfer, even if they reduce the fitness of their host cells. Conditions for the persistence of “parasitic” transposons are, however, restrictive: i) transposition must be replicative, rather than conservative; ii) the rate of transposition must be greater than the loss in host fitness caused by the transposon; and iii) cells must exchange plasmids at rates greater than the fitness cost of the transposon. I sought to test the validity of the model underlying this theory by performing experiments with laboratory populations of the bacterium Escherichia coli, the conjugative plasmid R100, and the transposons Tn3 and Tn5. A plasmid-borne transposon was introduced at low frequency into a population of bacteria carrying the same plasmid without the transposon in a habitat where the transposon offered no benefit to its host. The fate of the invading transposon was followed by tracking the various bacterial populations appearing in the cultures. Using independent estimates of the parameters of the model, predicted population changes were generated with numerical solutions of the model, and these were compared to experimental results. Plasmids transferred into new hosts as predicted by the model, and the resulting transconjugant populations either maintained a steady low density or rose slowly in abundance. Transposition appeared to play no role in population changes. Abundance of all cell types fit theoretical predictions of a system with no transposition, despite evidence that transposition was taking place. This is exactly what the model predicted. It thus appears unlikely that deleterious or neutral transposons have much impact on the genetics of bacterial populations. This is consistent with the hypothesis that most bacterial transposons are not parasitic DNA, but rather invade and persist in populations by providing a fitness advantage to cells carrying them.