Starch-based extruded plastic films and evaluation of their biodegradable properties

Plastic formulations containing up to 40% starch were prepared and blown into thin films using extrusion methods. Extruded films were evaluated for their biodegradability by exposing them to a consortium of starch degrading bacteria in the laboratory for 45 days and in the ‘La Silla’ river located in Monterrey, N.L. Mexico for up to 60 days. Biodegradability was assessed by measuring changes in weight loss and chemical composition of the films using Fourier transform infrared (FTIR) spectroscopy. While little or no degradation was apparent in control films made up of 100% low density polyethylene (LDPE) or 100% poly-(ethylene-co-acrylic acid) (EAA), most of the starch was depleted in starch-containing films exposed in the river. Starch degradation in films exposed to amylolytic bacteria in the laboratory was relatively slower. Also, increasing the amount of EAA from 25% to 50% substantially reduced starch depletion in these films.     

Starch-based extruded plastic films and evaluation of their biodegradable properties

Plastic formulations containing up to 40% starch were prepared and blown into thin films using extrusion methods. Extruded films were evaluated for their biodegradability by exposing them to a consortium of starch degrading bacteria in the laboratory for 45 days and in the La Silla river located in Monterrey, N.L. Mexico for up to 60 days. Biodegradability was assessed by measuring changes in weight loss and chemical composition of the films using Fourier transform infrared (FTIR) spectroscopy. While little or no degradation was apparent in control films made up of 100% low density polyethylene (LDPE) or 100% poly-(ethylene-co-acrylic acid) (EAA), most of the starch was depleted in starch-containing films exposed in the river. Starch degradation in films exposed to amylolytic bacteria in the laboratory was relatively slower. Also, increasing the amount of EAA from 25% to 50% substantially reduced starch depletion in these films.Abbreviations FTIR Fourier transform infrared - LDPE low density poly-(ethylene) - EAA poly-(ethyleneco-acrylic acid) - SEM Scanning electron microscopy The mention of firms names or trade products does not imply that they are endorsed or recommended by the U. S. Department of Agriculture over the firms or similar products not mentioned. All programs and services of the U. S. Department of Agriculture are offered on a nondiscriminatory basis without regard to race, color, national origin, religion, sex, marital status, or handicap.     

Adhesion of an Amylolytic Arthrobacter sp. to Starch-Containing Plastic Films

Cells of the amylolytic bacterium KB-1 (thought to be an Arthrobacter sp.) adhered (~70%) to the surface of plastic films composed of starch-poly (methylacrylate) graft copolymer (starch-PMA), but did not adhere (<10%) to films composed of polymethylacrylate (PMA), polyethylene (PE), carboxymethyl cellulose, or a mixture of PE plus poly (ethylene-coacrylic acid) (EAA), starch plus PE, or starch plus PE and EAA. About 30% of the cells adhered to gelatinized insoluble starch. Dithiothreitol (5 mM), EDTA (5 mM), and soluble starch (1%, wt/vol) had little effect on the adhesion of KB-1 cells to starch-PMA films. However, glutaraldehyde-fixed cells, azide-treated cells, and heat-killed cells did not bind to starch-PMA plastic, suggesting that the observed adhesion required cell viability. Culture supernatant from 5-day-old KB-1 cultures contained a proteolytic enzyme that inhibited cell adhesion to starch-PMA plastics. Trypsin-treated KB-1 cells also lost their ability to bind to starch-PMA plastic. When washed free of trypsin and suspended in fresh medium, trypsin-treated bacteria were able to recover adhesion activity in the absence, but not in the presence, of the protein synthesis inhibitor chloramphenicol. These results suggested that adhesion of KB-1 to starch-PMA plastic may be mediated by a cell surface protein. Although KB-1 bacteria bound to starch-PMA plastic, they did not appear to degrade starch in these films. Evidence of starch degradation was observed for starch-PE-EAA plastics, where <10% of the bacteria was bound, suggesting that cell adhesion may not be a prerequisite for degradation of some starch-containing plastics.     

The use of CP/MAS 13C-NMR for evaluating starch degradation in injection molded starch-plastic composites

Summary Cross-polarization/magic angle spinning (CP/MAS) ¹³C solid-state-NMR was utilized to evaluate the extent of hydrolysis and structure of starch in enzymatically digested injection molded starch-polyethylene-co-acrylic acid (EAA)-polyethylene (PE) plastic composites. It is a simple, quick and semi-quantitative method. Results are in agreement with reducing sugar assays routinely used for measuring starch degradation.     

High-Molecular-Weight Amylase Activities from Bacteria Degrading Starch-Plastic Films

Amylases having unusually high molecular weights (M_r, >150,000) were found in culture supernatants of an environmentally derived microbial mixed culture selected for its ability to utilize starch-containing plastic films as sole carbon sources. The mixed culture produced amylases active at pHs 5.5 and 8.0.     

Glycerol-plasticized films prepared from starch—poly(vinyl alcohol) mixtures: effect of poly(ethylene-co-acrylic acid)

Equations were obtained from response surface models to show how the ultimate tensile strength (UTS) and percent elongation at break (%E) of solution-cast films vary with relative amounts of starch, poly(vinyl alcohol) (PVA), poly(ethylene-co-acrylic acid) (EAA) and glycerol in the formulation. Equations found from the response surface methodology were used to optimize the relative amounts of the four components with respect to the physical properties of cast films. The model showed that only glycerol content was important to predict the UTS of the films. The model for %E was more complicated, since there was a three-way interaction between EAA, PVA and glycerol. This model also contained two other terms: a two-way interaction evolving glycerol and EAA. and a (PVA)³ term. In general, %E increased as EAA, PVA and glycerol were increased together. However, increased amounts of EAA could decrease %E if EAA was the only component increased. It is believed that EAA forms complexes with both starch and PVA, thereby increasing compatibility of the two polyhydroxy polymers. As %E increases, UTS of the films decreases. All the films produced in this paper were made with starch contents above 50% to insure an optimum film formulation with at least 50% starch. A mixture of 55·6% starch, 2·8% EAA, 28·3% PVA and 13·3% glycerol is believed to be close to the optimum formulation to obtain films having at least 100%E and UTS of 25 MPA, while still maintaining starch concentrations above 50%.     

Biofilm development of the polyethylene-degrading bacterium Rhodococcus ruber

We have recently isolated a biofilm-producing strain (C208) of Rhodococcus ruber that degraded polyethylene at a rate of 0.86% per week (r ²=0.98). Strain C208 adheres to polyethylene immediately upon exposure to the polyolefin. This initial biofilm differentiates (in a stepwise process that lasts about 20 h) into cell-aggregation-forming microcolonies. Further organization yields “mushroom-like” three-dimensional structures on the mature biofilm. The ratio between the population densities of the biofilm and the planktonic C208 cells after 10 days of incubation was about 60:1, indicating a high preference for the biofilm mode of growth. Analysis of extracellular polymeric substances (EPS) in the biofilm of C208 revealed that the polysaccharides level was up to 2.5 folds higher than that of the protein. The biofilm showed a high viability even after 60 days of incubation, apparently due to polyethylene biodegradation.     

大麦虫及其肠道微生物对聚乙烯的生物降解

【背景】废旧塑料聚乙烯因具有较高的化学惰性,不易被自然降解而形成长期污染。【目的】探究聚乙烯泡沫塑料对大麦虫生长发育的影响,为大麦虫作为降解聚乙烯泡沫塑料的昆虫推广提供理论依据。【方法】以大麦虫幼虫为研究对象,选用常见的泡沫塑料(聚乙烯),采用4种不同的饲喂方式T1 (麦麸)、T2 (泡沫塑料)、T3 (泡沫塑料+麦麸)、T4 (不饲喂)进行驯化,处理30 d后对大麦虫进行解剖,取肠道内容物于LB培养基中进行富集培养,将富集培养后的菌液加入以聚乙烯(polyethylene,PE)为唯一碳源的LCFBM培养基进行选择性培养,从中筛选分离得到对PE塑料有降解能力的菌株。【结果】取食泡沫塑料30d后,与单一饲喂PE相比,麦麸和PE混合饲喂后大麦虫幼虫的存活率为76%。采用傅里叶变换红外光谱检测发现虫粪组分中主要官能团中峰值明显变化,表明PE长链有断裂现象,并从肠道中分离得到3株可以对PE薄膜边缘造成明显侵蚀的菌株。【结论】大麦虫可取食并消化PE塑料,其肠道内的微生物对PE塑料的降解起到关键作用,研究结果为塑料污染的生物降解提供了科学证据。     

Prolonged cultivation of an anaerobic bacterial community producing hydrogen

This paper studies various methods of long-term maintenance of the process of hydrogen evolution during the growth of an anaerobic bacterial community on a starch-containing medium. Continuos fermentation with periodic feeding and effluent removal for 72 days, allow to obtain from 0.10 to 0.23 H₂/l of medium/day. The regime of regular transfer lasted more than 100 days, forming an average of 0.81 l H₂/l of medium/day. The advantages and disadvantages of different methods of microbial hydrogen production during a dark starch fermentation process are presented. From the obtained H₂-producing microbial community, we isolated an anaerobic spore-forming bacterium (strain BF). Phylogenetic analysis of the 16S PNA gene sequence of the new strain showed that according to its genotype it belongs to the Clostridium butyricum species.     

Prolonged cultivation of an anaerobic bacterial community producing hydrogen

This paper studies various methods of long-term maintenance of the process of hydrogen evolution during the growth of an aerobic bacterial community on a starch-containing environment. When cultured in separable trip fermentation mode for 72 days, from 0.10 to 0.23 H2/l of medium/day was formed. The regime of regular reseeding lasted more than 100 days, forming an average of 0.81 1 H2/l of medium/day. The advantages and disadvantages of different methods of microbial hydrogen production during a dark starch fermentation process are presented. From the obtained H2 forming microbial communities, we isolated an anaerobic spore-forming bacterium (strain BF). Phylogenetic analysis of the 16S RNA gene sequence of the new strain showed that according to its genotype it belongs to the Clostridium butyricum species.     

Isolation and bioaugmentation of an estradiol-degrading bacterium and its integration into a mature biofilm

Bioaugmentation can alter the potential activity as well as the composition of the naturally occurring microbial biota during bioremediation of a contaminated site. The focus of the current study is the pollutant 17β-estradiol (E2), which can cause endocrine effects and is potentially harmful to aquatic biota and to public health. The community composition and function of biofilms, originating from a wetland system, as affected by augmentation of an estradiol-degrading bacterium (EDB-LI1) under different conditions, were investigated. EDB-LI1 inoculation into biofilm from two wetland ponds representing early and advanced water treatment stages, respectively, yielded three significant observations, as follows: (i) EDB-LI1, enriched from a biofilm of a constructed wetland wastewater treatment system, was detected (by quantitative PCR [qPCR] analysis) in this environment in the augmented biofilm only; (ii) the augmented biofilm acquired the ability to remove estradiol; and (iii) the bacterial community composition (analyzed by PCR-denaturing gradient gel electrophoresis [DGGE]) of the augmented biofilm differed from that of the control biofilm. Furthermore, EDB-LI1 bioaugmentation showed a higher level of removal of estradiol with biofilms that originated from the advanced-treatment-stage wetland pond than those from the early-treatment-stage pond. Hence, the bioaugmentation efficiency of EDB-LI1 depends on both the quality of the feed water and the microbial community composition in the pond.     

Environmental Inactivation of <Emphasis Type="Italic">Cryptosporidium parvum</Emphasis> Oocysts in Waste Stabilization Ponds

The survival of Cryptosporidium parvum oocysts in a waste stabilization pond system in northwestern Spain and the effects of sunlight and the depth and type of pond on oocyst viability were evaluated using an assay based on the exclusion or inclusion of two fluorogenic vital dyes, 4′,6-diamidino-2-phenylindole (DAPI) and propidium iodide (PI). All tested factors had significant effects (P < 0.01) over time on C. parvum oocyst viability. Sunlight exposure was the most influential factor for oocyst inactivation. A 40% reduction was observed after 4 days exposure to sunlight conditions compared with dark conditions. The type of pond also caused a significant reduction in C. parvum oocyst viability (P < 0.01). Inactivation rates reflected that the facultative pond was the most aggressive environment for oocysts placed both at the surface (presence of sunlight) and at the bottom (absence of sunlight) of the pond, followed by the maturation pond and the anaerobic pond. The mean inactivation rates of oocysts in the ponds ranged from 0.0159 to 0.3025 day⁻¹.     

Biodegradation of starch–polyethylene films in soil and by microbial cultures

Among the starch-containing low density polyethylene films tested for biodegradation, films containing 30% starch showed maximum biodegradation leading to a loss of 6.3% in weight and 84.5% starch upon burial in a soil–compost mixture for 48weeks. Biodegradation of this film was accelerated by incubation with an acclimatized culture in a shake-flask showing 11.2% and 68.9% loss of weight and starch respectively, after only 6 weeks. FTIR and 13C NMR analysis revealed that the loss of starch in biodegraded films is accompanied by structural changes in polyethylene in terms of reduction in the peak area of polyethylene backbone and short chain branches.     

Temporal and Spatial Distribution of the Microbial Community of Winogradsky Columns

Winogradsky columns are model microbial ecosystems prepared by adding pond sediment to a clear cylinder with additional supplements and incubated with light. Environmental gradients develop within the column creating diverse niches that allow enrichment of specific bacteria. The enrichment culture can be used to study soil and sediment microbial community structure and function. In this study we used a 16S rRNA gene survey to characterize the microbial community dynamics during Winogradsky column development to determine the rate and extent of change from the source sediment community. Over a period of 60 days, the microbial community changed from the founding pond sediment population: Cyanobacteria, Chloroflexi, Nitrospirae, and Planctomycetes increased in relative abundance over time, while most Proteobacteria decreased in relative abundance. A unique, light-dependent surface biofilm community formed by 60 days that was less diverse and dominated by a few highly abundant bacteria. 67–72% of the surface community was comprised of highly enriched taxa that were rare in the source pond sediment, including the Cyanobacteria Anabaena, a member of the Gemmatimonadetes phylum, and a member of the Chloroflexi class Anaerolinea. This indicates that rare taxa can become abundant under appropriate environmental conditions and supports the hypothesis that rare taxa serve as a microbial seed bank. We also present preliminary findings that suggest that bacteriophages may be active in the Winogradsky community. The dynamics of certain taxa, most notably the Cyanobacteria, showed a bloom-and-decline pattern, consistent with bacteriophage predation as predicted in the kill-the-winner hypothesis. Time-lapse photography also supported the possibility of bacteriophage activity, revealing a pattern of colony clearance similar to formation of viral plaques. The Winogradsky column, a technique developed early in the history of microbial ecology to enrich soil microbes, may therefore be a useful model system to investigate both microbial and viral ecology.     

Production of ethanol at 45°C on starch-containing media by mixed cultures of the thermotolerant,ethanol-producing yeast Kluyveromyces marxianus IMB3 and the thermophilic filamentous fungus Talaromyces emersonii CBS 814.70

 The thermotolerant, ethanol-producing yeast strain, Kluyveromyces marxianus IMB3, was shown to produce ethanol at 45°C on starch-containing media supplemented with a crude amylase preparation derived from the thermophilic, filamentous fungus Talaromyces emersonii CBS 813.70. Ethanol production on media containing 4% (w/v) starch increased to a maximum of 15 g/l with 40 h, and this represented 74% of the maximum theoretical yield. Subsequent experimentation involving growth of both organisms in fermentations on starch-containing media (4% w/v) demonstrated that the mixed-culture system was capable of ethanol production at 45°C with maximum yields at 12 g/l obtained with 65 h. The advantages associated with ethanol production by this system are discussed. Received: 16 May 1994/Accepted: 22 October 1994     

Microbially enhanced dissolution of HgS in an acid mine drainage system in the California Coast Range

Mercury sulfides (cinnabar and metacinnabar) are the main ores of Hg and are relatively stable under oxic conditions (K_sp = 10^?54 and 10^?52, respectively). However, until now their stability in the presence of micro‐organisms inhabiting acid mine drainage (AMD) systems was unknown. We tested the effects of the AMD microbial community from the inoperative Hg mine at New Idria, CA, present in sediments of an AMD settling pond adjacent to the main waste pile and in a microbial biofilm on the surface of this pond, on the solubility of crystalline HgS. A 16S rRNA gene clone library revealed that the AMD microbial community was dominated by Fe‐oxidizing (orders Ferritrophicales and Gallionellas) and S‐oxidizing bacteria (Thiomonas sp.), with smaller amounts (≤6%) being comprised of the orders Xanthomondales and Rhodospirillales. Though the order Ferritrophicales dominate the 16S rRNA clones (>60%), qPCR results of the microbial community indicate that the Thiomonas sp. represents ~55% of the total micro‐organisms in the top 1 cm of the AMD microbial community. Although supersaturated with respect to cinnabar and metacinnabar, microcosms inoculated with the AMD microbial community were capable of releasing significantly more Hg into solution compared to inactivated or abiotic controls. Four different Hg‐containing materials were tested for bacterially enhanced HgS dissolution: pure cinnabar, pure metacinnabar, mine tailings, and calcine material (processed ore). In the microcosm with metacinnabar, the presence of the AMD microbial community resulted in an increase of dissolved Hg concentrations up to 500 μg L^‐1 during the first 30 days of incubation. In abiotic control microcosms, dissolved Hg concentrations did not increase above 100 ng L^?1. When Hg concentrations were below 50 μg L^‐1, the Fe‐oxidizing bacteria in the AMD microbial community were still capable of oxidizing Fe(II) to Fe(III) in the AMD solution, whereas concentrations above 50 μg L^?1 resulted in inhibition of microbial iron oxidation. Our experiments show that the AMD microbial community contributes to the dissolution of mercury sulfide minerals. These findings have major implications for risk assessment and future management of inoperative Hg mines worldwide.     

Shelf-life extension of fresh-cut iceberg lettuce (Lactuca sativa L) by different antimicrobial films

This study was conducted to investigate the antibacterial activity and shelf-life extension effect of iceberg lettuce packed in BN/PE film. The BN/PE film has a strong microbial suppression effect on pathogenic bacteria such as Escherichia coli, Salmonella enteritidis, and S. typhimurium. The number of psychrophiles and mesophiles during 5 days of cold storage of fresh-cut iceberg lettuce at 10 degrees C packaged in BN/PE film was strictly suppressed in comparison with other tested films (OPP, PE, and PET film). When fresh processed iceberg lettuce was processed and stored under the current conditions, the shelf-life of the product was longer than 5 days in the BN/PE film package, whereas the shelf-life when using the other films tested, PE, OPP and PET, was no longer than 3-4 days. The decay rates of the iceberg lettuce packed in the BN/PE film was maintained at 29.8 +/- 2.1% on the 5th day of preservation. The samples packed in BN/PE film maintained an excellent visual quality during the 3 days of storage without significant differences in comparison with the initial visual quality. No browning was observed in the samples packed in BN/PE film for up to 3 days. The texture of shredded iceberg lettuce packaged in BN/PE film remained unchanged up to 3 days, and then a moderate decrease in texture was observed after 4 days of storage. In addition, the overall acceptability of fresh-cut iceberg lettuce packaged in BN/PE film did not change for up to 3 days, whereas the samples packaged in the other films were inedible by 3 days of storage. In conclusion, the shelf-life of fresh-cut iceberg lettuce packaged in the BN/PE film was extended to more than 5 days at 10 degres C, whereas that in the other films was 2 days at 10 degrees C. Therefore, the shelf-life extension effect of the fresh-cut iceberg lettuce in BN/PE film packaging was very effective compared with the other films tested.     

Effect of age on reproductive attributes of an aphidophagous ladybird, Cheilomenes sexmaculata

The effect of both male and female age was investigated on certain reproductive attributes, viz. mating incidence, mating duration, fecundity, percent egg viability, ratio of reproductive and non‐reproductive periods and reproductive rate, of an aphidophagous ladybird, Cheilomenes sexmaculata (Fabricius). Females started mating at the age of 8 hours post‐emergence (PE) and males at the age of 2 days PE. Mating in the laboratory was a male‐dominated phenomenon. The mating duration and reproductive rate of 10‐day‐old females when mated with males of varying ages increased up to the male age of 60 days, and thereafter decreased, whereas, fecundity, egg viability and ratio of reproductive and non‐reproductive periods increased up to the male age of 50 days, and thereafter declined. However, when females of varying ages were mated with 10‐day‐old males, fecundity and reproductive rate increased up to 40 days of female age, respectively, then decreased. The ratio of reproductive and non‐reproductive periods increased with increasing age of females. Mating age for optimal reproductive output was 10J50‐day‐old males and NE to 40‐day‐old females. Reproductive cessation in males was recorded after 50 days PE, whereas in females at the age of 40 days PE. Higher mating durations lead to elevated reproductive rates. Delay in the reproductive phase was positively correlated with longevity. The results of this study may aid mass multiplication of this ladybird by identifying and promoting usage of adults of optimal age. Our results also enhance our understanding of the effect of age on reproductive attributes in ladybirds.     

Repeated-batch fermentation in biofilm reactors with plastic-composite supports for lactic acid production

Novel plastic supports consisting of polypropylene blended with oat hulls/soybean flour or oat hulls/zein were evaluated as supports for mixed- and pure-culture, repeated-batch, lactic acid fermentations in biofilm reactors. Streptomyces viridosporus T7A (ATCC 39115) was used to form a biofilm for mixed-culture fermentations, and Lactobacillus casei subsp. rhamnosus (ATCC 11443) was used for L-lactic acid production. The pure- and mixed-culture biofilm reactors were operated as repeated-batch fermentors with pH controlled at 5 for more than 2 months in which each reactor's medium was changed every 3 days for 24 batches. The plastic-composite supports performed better than polypropylene-alone supports. Significantly (P<0.05) higher concentrations of lactic acid were produced by the mixed- and pure-culture biofilm bioreactors with corresponding plastic-composite supports (55 g/l and 60 g/l respectively) than with polypropylene-alone supports (48 g/l for both mixed and pure culture). However, the percentage yields, maximum productivity, glucose consumption rates, and growth rates (based on the mass of suspended cells only) were not significantly different between reactors. Maximum lactic acid concentration was consistently greater for the plastic-composite support biofilm reactors. In the suspension culture at pH 5 without plastic supports, maximum lactic acid concentration at days 3 and 5 was 48 g/l and 60 g/l, respectively. These results confirm that the use of plastic-composite supports is recommended for pure-culture lactic acid production in long-term repeated-batch fermentation, and that cell immobilization was occurring.Journal Paper No. J-15813 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa, Projects No. 3253 and 0178