Atomic force spectroscopy-based study of antibody pesticide interactions for characterization of immunosensor surface

Development of immunobiosensor detector surfaces involves the immobilization of active antibodies on the capture surface without any significant loss of antigen binding activity. An atomic force microscope (AFM) was used to directly evaluate specific interactions between pesticides and antibodies on a biosensor surface. Oriented immobilization of antibodies against two herbicide molecules 2,4-dichlorophenoxyacetic acid (2,4-D) and atrazine, on gold, was carried out to create the active immunobiosensor surfaces. The adhesive forces between immobilized antibodies and their respective antigens were measured by force spectroscopy using hapten-carrier protein functionalized AFM cantilevers. Relative functional affinity (avidity) measurements of the antibodies carried out prior to immobilization, well correlated with subsequent AFM force measurement observations. Analysis showed that immobilization had not compromised the reactivity of the surface immobilized antibody molecules for antigen nor was there any change in their relative quality with respect to each other. The utility of the immunoreactive surface was further confirmed using a Surface Plasmon Resonance (SPR) based detection system. Our study indicates that AFM can be utilized as a convenient immunobiosensing tool for confirming the presence and also assessing the strength of antibody-hapten interactions on biosensor surfaces under development.     

Surface plasmon resonance immunosensor for the detection of Salmonella typhimurium

An immunosensor based on surface plasmon resonance (SPR) using protein G was developed for the detection of Salmonella typhimurium. A protein G layer was fabricated by binding chemically to self-assembly monolayer (SAM) of 11-mercaptoundecanoic acid (MUA) on gold (Au) surface. The formation of protein G layer on Au surface modified with 11-MUA and the binding of antibody and antigen in series were confirmed by SPR spectroscopy. The effect of detergent such as Tween-20 on binding efficiency of antibody and antigen was investigated by SPR. The binding efficiency of antigen to the antibody immobilized on Au surface was improved up to about 85% and 100% by using protein G and Tween-20, respectively. The surface morphology analyses of 11-MUA monolayer on Au substrate, protein G layer on 11-MUA monolayer and antibody layer immobilized on protein G layer were performed by atomic force microscope (AFM). Consequently, an immunosensor based on SPR for the detection of S. typhimurium using protein G was developed with a detection range of 10(2) to 10(9)CFU/ml. The current fabrication technique of a SPR immunosensor for the detection of S. typhimurium could be applied to construct other immnosensors or protein chips.     

Cell immobilization using self-assembled synthetic oligopeptide and its application to biological toxicity detection using surface plasmon resonance

The immobilized cell using self-assembled synthetic oligopeptide was applied to the biological toxicity detection of environmental pollutant. Thin films based on cysteine-terminated synthetic oligopeptides were fabricated for the immobilization of Escherichia coli O157:H7 on gold (Au) substrate. Layer formation and immobilization of E. coli O157:H7 were investigated with surface plasmon resonance (SPR) and atomic force microscopy (AFM). Experimental results showed that the thin film of cysteine-terminated synthetic oligopeptide was successfully fabricated and it could be applied for the immobilization of E. coli O157:H7. The attached living cell was exposed to toxic chemical such as phenol, which induced the change of SPR angle. As the exposed concentration of phenol was increased, the change of plasmon resonance angle was increased, which indicates the decrease of cell viability. The detection limit based on SPR was determined as 5 ppm. The proposed cell immobilization method using self-assembly technique can be applied to construct the cell microarray for the diagnosis, drug detection, and on-site monitoring.     

Nanocrystalline diamond modified gold electrode for glucose biosensing

Boron-doped diamond has drawn much attention in electrochemical sensors. However there are few reports on non-doped diamond because of its weak conductivity. Here, we reported a glucose biosensor based on electrochemical pretreatment of non-doped nanocrystalline diamond (N-NCD) modified gold electrode for the selective detection of glucose. N-NCD was coated on gold electrode and glucose oxidase (GOx) was immobilized onto the surfaces of N-NCD by forming amide linkages between enzyme amine residues and carboxylic acid groups on N-NCD. The anodic pretreatment of N-NCD modified electrode not only promoted the electron transfer rate in the N-NCD thin film, but also resulted in a dramatic improvement in the reduction of the dissolved oxygen. This performance could be used to detect glucose at negative potential through monitoring the current change of oxygen reduction. The biosensor effectively performs a selective electrochemical analysis of glucose in the presence of common interferents, such as ascorbic acid (AA), acetaminophen (AP) and uric acid (UA). A wide linear calibration range from 10 microM to 15 mM and a low detection limit of 5 microM were achieved for the detection of glucose.     

Caseinate-Induced Competitive Displacement of Whey Protein from Interfaces

The caseinate-induced competitive displacement of whey protein from planar air-water interfaces was investigated based on atomic force microscopy (AFM) imaging and that from the surfaces of oil droplets immersed in aqueous solution based on AFM force spectroscopy. After the addition of sodium caseinate to the sub-phase, the surface pressure of planar interfacial films of pre-adsorbed whey protein increased from 8 mN/m to up to 21 mN/m. The thicknesses of interfacial films were uniform and remained to be approximately 2 nm at relatively low surface pressures up to 18 mN/m, while they became uneven at higher surface pressures and increased to up to 7.1 nm, presumably due to the compression of interfacial whey protein networks by adsorbed caseinate. The rigidity of oil droplets coated with protein adsorbed to their surfaces was then evaluated based on the slope of approximately linear force-distance curves obtained by pressing an oil droplet against another. The adsorption of whey protein to oil droplet surfaces increased droplets’ rigidity. The subsequent addition of caseinate to the bulk solution surrounding oil droplets coated with pre-adsorbed whey protein further increased droplets’ rigidity. The present results suggest that caseinate adsorbed to an interface to which whey protein had adsorbed in advance did not completely expel pre-adsorbed whey protein molecules into the aqueous phase but caused a compaction of interfacial whey protein networks and thereby strengthened the interfacial film.     

Immunosensor for detection of Legionella pneumophila using surface plasmon resonance

Immunosensor using surface plasmon resonance (SPR) onto self-assembled protein G layer was developed for the detection of Legionella pneumophila. A self-assembled protein G layer on gold (Au) surface was fabricated by adsorbing a mixture of 11-mercaptoundecanoic acid (MUA) and hexanethiol (molar ratio of 1:2) and the activation process for chemical binding between free amine (-NH(2)) of protein G and 11-(MUA) using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDAC) in series. The formation of self-assembled protein G layer on Au substrate and the binding of antibody and antigen in series were confirmed by SPR spectroscopy. The surface morphology analyses of self-assembled protein G layer on Au substrate and monoclonal antibody against L. pneumophila immobilized on protein G were performed by atomic force microscope (AFM). The immunosensor for detection of L. pneumophila using SPR was developed and its detection limit could find up to 10(5) cells/ml.     

Pretransition and progressive softening of bovine carbonic anhydrase II as probed by single molecule atomic force microscopy

To develop a simple method for probing the physical state of surface adsorbed proteins, we adopted the force curve mode of an atomic force microscope (AFM) to extract information on the mechanical properties of surface immobilized bovine carbonic anhydrase II under native conditions and in the course of guanidinium chloride-induced denaturation. A progressive increase in the population of individually softened molecules was probed under mildly to fully denaturing conditions. The use of the approach regime of force curves gave information regarding the height and rigidity of the molecule under compressive stress, whereas use of the retracting regime of the curves gave information about the tensile characteristics of the protein. The results showed that protein molecules at the beginning of the transition region possessed slightly more flattened and significantly more softened conformations compared with that of native molecules, but were still not fully denatured, in agreement with results based on solution studies. Thus the force curve mode of an AFM was shown to be sensitive enough to provide information concerning the different physical states of single molecules of globular proteins.     

Improvement of antibody immobilization using hyperbranched polymer and protein A

For the construction of a well-defined antibody surface, protein A was used as a binding material to immobilize antibodies onto gold-derivatized transducers. The traditional method tends to assemble protein A directly onto the gold-derivatized transducers. In this paper, we tried to indirectly bind protein A onto sensors through hyperbranched polymer (HBP) which was synthesized from p-phenylenediamine and trimesic acid. The three-dimensional structure of HBP and the characteristics including orientation control and biocompatibility of protein A led to highly efficient immunoreactions and enhanced detection system performance. With this strategy, cysteamine monolayer was first assembled onto Au electrodes associated with the piezoelectric quartz crystal; secondly, the cysteamine-modified gold electrode was further modified by the activated HBP; thirdly, protein A was immobilized onto the HBP film; and finally, antibodies were immobilized onto the surface of protein A film for detecting the corresponding antigen. The quartz crystal microbalance immunosensor thus fabricated was applied to detect hepatitis B surface antigen in solutions that ranged from 0.71 to 300 μg mL⁻¹. The detection limit was estimated to be 0.53 μg mL⁻¹. The immunosensor holds good selectivity, sensitivity, and repeatability.     

Atomic force microscopy fishing of GP120 on immobilized aptamers and its mass spectrometry identification

A method of atomic force microscopy-based fishing (AFM fishing) has been developed for protein detection in the analyte solution using a chip with an immobilized aptamer. This method is based on the biospecific fishing of a target protein from a bulk solution onto the small AFM chip area with the immobilized aptamer to this protein used as the molecular probe. Such aptamer-based approach allows to increase an AFM image contrast compared to the antibody-based approach. Mass spectrometry analysis used after the biospecific fishing to identify the target protein on the AFM chip has proved complex formation. Use of the AFM chip with the immobilized aptamer avoids interference of the antibody and target protein peaks in a mass spectrum.     

Development of surface plasmon resonance immunosensor through metal ion affinity and mixed self-assembled monolayer

An immunosensor based on surface plasmon resonance (SPR) with enhanced performance was developed through a mixed self-assembled monolayer. A mixture of 16- mercaptohexadecanic acid (16-MHA) and 1-undecanethiol with various molar ratios was self-assembled on gold (Au) surface and the carboxylic acid groups of 16-MHA were then coordinated to Zn ions by exposing the substrate to an ethanolic solution of Zn(NO(3))(2)d6H2O. The antibody was immobilized on the SPR surface by exposing the functionalized substrate to the desired solution of antibody in phosphatebuffered saline (PBS) molecules. The film formation in series was confirmed by SPR and atomic force microscopy (AFM). The functionalized surface was applied to develop an SPR immunosensor for detecting human serum albumin (HSA) and the estimated detection limit (DL) was 4.27 nM. The limit value concentration can be well measured between ill and healthy conditions.     

Visualization and identification of hepatitis C viral particles by atomic force microscopy combined with MS/MS analysis

A possibility of detection and identification of hepatitis C viral (HCV) particles by atomic force microscopy (AFM) in combination with mass spectrometry (MS) has been investigated. The AFM/MS approach is based on two technologies: 1. AFM-biospecific fishing that allows to detect, concentrate from solution and to count protein complexes on the surface of a AFM-nanochip; 2. mass spectrometric identification of these complexes. AFM-biospecific fishing of HCVcoreAg from solution was carried onto the surface of AFM-nanochips with immobilized anti-HCVcoreAg. It was shown that HCVcoreAg/anti-HCVcore_im complexes were formed on AFM-nanochips in quantity sufficient for their subsequent mass spectrometric identification. Thus, the AFM/MS approach allows to identify fragments of hepatitis C virus fished on the surface of AFM-nanochip from serum.     

Methods for reducing nonspecific interaction in antibody-antigen assay via atomic force microscopy

We developed a method to measure the rupture forces between antibody and antigen by atomic force microscopy (AFM). Previous studies have reported that in the measurement of antibody–antigen interaction using AFM, the specific intermolecular forces are often obscured by nonspecific adhesive binding forces between antibody immobilized cantilever and substrate surfaces on which antigen or nonantigen are fixed. Here, we examined whether detergent and nonreactive protein, which have been widely used to reduce nonspecific background signals in ordinary immunoassay and immunoblotting, could reduce the nonspecific forces in the AFM measurement. The results showed that, in the presence of both nonreactive protein and detergent, the rupture forces between anti-ferritin antibodies immobilized on a tip of cantilever and ferritin (antigen) on the substrate could be successfully measured, distinguishing from nonspecific adhesive forces. In addition, we found that approach/retraction velocity of the AFM cantilever was also important in the reduction of nonspecific adhesion. These insights will contribute to the detection of specific molecules at nanometer scale region and the investigation of intermolecular interaction by the use of AFM.     

Electrochemical immunoanalysis of cardiac myoglobin

Methods of myoglobin determination based on electrochemical analysis by means of analysis of electrochemical parameters of modified electrodes have been proposed. The method of direct detection is based on interaction of myoglobin with anti-myoglobin with subsequent electrochemical registration of this hemoprotein. The electrode surface was modified by a membrane-like synthetic didodecyldimethylammonium bromide (DDAB), gold nanoparticles and antibodies to human cardiac myoglobin the electrochemical reduction of myoglobin heme was registered provided that the antigen (myoglobin) was present in the samples. The reaction of myoglobin binding to antibodies immobilized on the electrode surface was also registered using electrochemical impedance spectroscopy. The study of electro analytical characteristics revealed high specificity and sensitivity of the developed method. The biosensor was characterized by low detection limit and a high working range of the detected concentrations from 17.8 to 1780 ng/ml (from 1 to 100 nM). The method of myoglobin determination based on a signal of gold nanoparticles has also been proposed. The signal was detected with stripping voltammetry. There was a change in the cathodic peak area and the peak height of gold oxide reduction for the electrodes with antibodies and the electrodes with the antibody-myoglobin complex.     

Surface plasmon resonance immunosensor using self-assembled protein G for the detection of Salmonella paratyphi

A surface plasmon resonance (SPR) based immunosensor using self-assembled protein G was developed for the detection of Salmonella paratyphi. In order to endow a solid substrate binding affinity to protein G, the free amine (-NH2) of protein G was substituted into thiol (-SH) using 2-iminothiolane. Thus, self-assembled protein G was fabricated on gold (Au) substrate. The formation of protein G layer on Au surface, and the binding of antibody and antigen in series were confirmed by SPR spectroscopy. The surface morphology analysis of the protein G layer on Au surface was performed by atomic force microscope (AFM). Consequently, an immunosensor based on SPR for the detection of S. paratyphi using self-assembled protein G was developed with a detection range of 10(2)-10(7) CFU/ml. The current fabrication technique of a SPR immunosensor for the detection of S. paratyphi could be applied to construct other immnosensors or protein chips.     

Amplification of antigen-antibody interactions based on biotin labeled protein-streptavidin network complex using impedance spectroscopy.

Antibody was covalently immobilized by amine coupling method to gold surfaces modified with a self-assembled monolayer of thioctic acid. The electrochemical measurements of cyclic voltammetry and impedance spectroscopy showed that the hexacyanoferrate redox reactions on the gold surface were blocked due to the procedures of self-assembly of thioctic acid and antibody immobilization. The binding of a specific antigen to antibody recognition layer could be detected by measurements of the impedance change. A new amplification strategy was introduced for improving the sensitivity of impedance measurements using biotin labeled protein-streptavidin network complex. This amplification strategy is based on the construction of a molecular complex between streptavidin and biotin labeled protein. This complex can be formed in a cross-linking network of molecules so that the amplification of response signal will be realized due to the big molecular size of complex. The results show that this amplification strategy causes dramatic improvement of the detection sensitivity of hIgG and has good correlation for detection of hIgG in the range of 2-10 microg/ml.     

A piezoelectric quartz crystal biosensor: the use of two single cysteine mutants of the periplasmic Escherichia coli glucose/galactose receptor as target proteins for the detection of glucose

We have examined the potential utility of a glucose biosensor that employs the glucose/galactose receptor of Escherichia coli with a quartz crystal microbalance (QCM). Two different genetically engineered mutant proteins were utilized, each involving the incorporation of a single cysteine into the amino acid sequence of the protein. The proteins were immobilized on the surface of a piezoelectric crystal by a direct sulfur-gold linkage. Since the cysteines were located at different positions in the sequence, the receptors attach to the surface with different orientations. Considering only mass effects, the target sugars for this receptor are predicted to be too small to be detectable with a QCM. However, our sensors indicated measurable and reproducible frequency responses when immobilized receptor was exposed to sugar. This unexpectedly large frequency response occurs because the protein film is transformed from a viscous layer to a more rigid nondissipative film. The QCM can detect these changes because of the direct linkage of the proteins to the surface. Calculations of the frequency response expected for a viscoelastic film with different rheological characteristics support this hypothesis. This study is significant because it illustrates a widened applicability for the QCM methodology to protein systems that bind small molecules and undergo ligand-induced conformational changes.     

Patterning of photosensitive polyimide LB film and its application in the fabrication of biomolecular microphotodiode array

Ultra thin film of photosensitive polyimide having benzene and sulfonyloxyimide moieties in the main chain was prepared using a Langmuir-Blodgett (LB) technique, and then micro array pattern of the polyimide LB film on a gold substrate was obtained by deep UV lithographic technique. In order to array cytochrome c molecules along the micro-patterned gold substrate, the well-characterized monolayer of cytochrome c was immobilized with a mixed monolayer of 11-mercaptoundecanoic acid (11-MUDA) and decanethiol. The redox activity and electron transfer between cytochrome c molecular center and gold electrode interface for the self-assembled cytochrome c monolayer were investigated by cyclic voltammetry measurement. Biomolecular photodiode consisting of cytochrome c and green fluorescent protein (GFP) onto the patterned gold substrate was fabricated by self-assembly process. The integration and morphology of cytochrome c and GFP were studied from the measurements of atomic force microscopy (AFM) and fluorescence emission. Especially, current-voltage characteristics of the protein multilayers were investigated by scanning tunneling microscopy (STM) and its application in biomolecular photodiode was also examined.     

A label-free immunosensor for determination of salbutamol based on localized surface plasmon resonance biosensing

We developed a localized surface plasmon resonance (LSPR)-based label-free optical biosensor for detection of salbutamol (Sal). Hollow gold nanoparticles (HGNs) which deposited on transparent indium tin oxide (ITO) film coated glass was used to sensing platform. Antibody against Sal was immobilized on HGN surface to recognize the target Sal molecules. Thus, the change of LSPR peak was proportional to the concentration of Sal in the solution. The experimental results demonstrated that the LSPR immunosensor possessed a good sensitivity and a high selectivity for Sal. The detection range for Sal was from 0.05 to 0.8 μg/mL with a correlation coefficient of 0.996. The biosensor was applied for the detection for Sal in spiked animal feed and pork liver samples, and the recoveries were in the range of 97–105 %. Therefore, it is expected that this approach may offer a new method in designing label-free LSPR immunosensor for detection of small molecules.     

Nanoscale fabrication of protein A on self-assembled monolayer and its application to surface plasmon resonance immunosensor

The fabrication of protein A film on self-assembled monolayer was done for the construction of immunosensor using surface plasmon resonance (SPR) measurement. The layer of heterobifunctional linker, N-succinimidyl-3-(2-pyridyldithio)propionate (SPDP) was self-assembled on the gold (Au) surface. Due to the succinimidyl functional group in SPDP to be reacted with amine (NH₂) group of protein A, the covalent immobilization of protein A was subsequently induced toward Au surface. The characteristics of film formation were investigated using SPR with respect to the various concentrations of SPDP and protein A. The optimal concentration for the film formation was found to be 0.1 mg/mL of SPDP and 0.1 mg/mL of protein A, respectively. The surface topography of protein A layer using atomic force microscopy showed that the heteromolecular layer was formed successfully. The antibody, anti-bovine serum albumin (BSA), was immobilized onto protein A layer, and the fabricated antibody layer was applied for the detection of BSA. The extent of BSA–antibody binding was measured using SPR and its lower detection limit of BSA was 100 pM.     

Immobilized protein films for assessing surface proteolysis kinetics

Enzymatic cleavage of protein substrates at solid surfaces is important in the food and detergent industries, and in biomedical applications. Creation of a reproducible protein substrate to study surface proteolysis is difficult as protein monolayers may not necessarily provide complete coverage of the surface, and protein multilayer systems are often unstable and nonuniform. We present a method to form a reproducible, immobilized, multilayer protein substrate. A 100-nm ovalbumin protein film is spin-cast onto an amine-functionalized silicon wafer and chemically cross-linked using glutaraldehyde to create a multilayer film. This protein film is stable in the presence of non-protease components such as detergents, and can be tailored to include different proteins and their mixtures, and varying degrees of susceptibility to proteolysis. Ellipsometry was used to measure the protein-film thickness as the substrate is cleaved by the protease subtilisin Carlsberg. The decrease in film thickness over time was found to be linear, indicating the depth-homogeneity of the model substrates. Lateral-homogeneity of the substrates was corroborated by atomic force microscopy (AFM) and by the reproducibility of the ellipsometric film thickness measured across different spots on the sample substrates. AFM of the multilayer protein surface before and after exposure to enzyme suggests uniform areal surface cleavage by the protease.