Intermediate filaments exchange subunits along their length and elongate by end-to-end annealing

Actin filaments and microtubules lengthen and shorten by addition and loss of subunits at their ends, but it is not known whether this is also true for intermediate filaments. In fact, several studies suggest that in vivo, intermediate filaments may lengthen by end-to-end annealing and that addition and loss of subunits is not confined to the filament ends. To test these hypotheses, we investigated the assembly dynamics of neurofilament and vimentin intermediate filament proteins in cultured cells using cell fusion, photobleaching, and photoactivation strategies in combination with conventional and photoactivatable fluorescent fusion proteins. We show that neurofilaments and vimentin filaments lengthen by end-to-end annealing of assembled filaments. We also show that neurofilaments and vimentin filaments incorporate subunits along their length by intercalation into the filament wall with no preferential addition of subunits to the filament ends, a process which we term intercalary subunit exchange.     

Actin filament uncapping localizes to ruffling lamellae and rocketing vesicles

Regulated actin filament assembly is critical for eukaryotic cell physiology. Actin filaments are polar structures, and those with free high affinity or barbed ends are crucial for actin dynamics and cell motility. Actin filament barbed-end-capping proteins inhibit filament elongation after binding, and their regulated disassociation is proposed to provide a source of free filament ends to drive processes dependent on actin polymerization. To examine whether dissociation of actin filament capping proteins occurs with the correct spatio-temporal constraints to contribute to regulated actin assembly in live cells, I measured the dissociation of an actin capping protein, gelsolin, from actin in cells using a variation of fluorescence resonance energy transfer (FRET). Uncapping was found to occur in cells at sites of active actin assembly, including protruding lamellae and rocketing vesicles, with the correct spatio-temporal properties to provide sites of actin filament polymerization during protrusion. These observations are consistent with models where uncapping of existing filaments provides sites of actin filament elongation.     

COP9 signalosome controls the Carma1–Bcl10–Malt1 complex upon T‐cell stimulation

The Carma1–Bcl10–Malt1 (CBM) complex connects T‐cell receptor (TCR) signalling to the canonical IκB kinase (IKK)/NF (nuclear factor)‐κB pathway. Earlier studies have indicated that the COP9 signalosome (CSN), a pleiotropic regulator of the ubiquitin/26S proteasome system, controls antigen responses in T cells. The CSN is required for the degradation of the NF‐κB inhibitor IκBα, but other molecular targets involved in T‐cell signalling remained elusive. Here, we identify the CSN subunit 5 (CSN5) as a new interactor of Malt1 and Carma1. T‐cell activation triggers the recruitment of the CSN to the CBM complex, and CSN downregulation impairs TCR‐induced IKK activation. Furthermore, the CSN is required for maintaining the stability of Bcl10 in response to T‐cell activation. Taken together, our data provide evidence for a functional link between the evolutionarily conserved CSN and the adaptive immunoregulatory CBM complex in T cells.     

Ena/VASP proteins capture actin filament barbed ends

Ena/VASP (vasodialator-stimulated protein) proteins regulate many actin-dependent events, including formation of protrusive structures, fibroblast migration, neurite extension, cell-cell adhesion, and Listeria pathogenesis. In vitro, Ena/VASP activities on actin are complex and varied. They promote actin assembly, protect filaments from cappers, bundle filaments, and inhibit filament branching. To determine the mechanisms by which Ena/VASP proteins regulate actin dynamics at barbed ends, we monitored individual actin filaments growing in the presence of VASP and profilin using total internal reflection fluorescence microscopy. Filament growth was unchanged by VASP, but filaments grew faster in profilin-actin and VASP than with profilin-actin alone. Actin filaments were captured directly by VASP-coated surfaces via interactions with growing barbed ends. End-attached filaments transiently paused but resumed growth after becoming bound to the surface via a filament side attachment. Thus, Ena/VASP proteins promote actin assembly by interacting directly with actin filament barbed ends, recruiting profilin-actin, and blocking capping.     

Thin filaments elongate from their pointed ends during myofibril assembly in Drosophila indirect flight muscle.

Tropomodulin (Tmod) is an actin pointed-end capping protein that regulates actin dynamics at thin filament pointed ends in striated muscle. Although pointed-end capping by Tmod controls thin filament lengths in assembled myofibrils, its role in length specification during de novo myofibril assembly is not established. We used the Drosophila Tmod homologue, sanpodo (spdo), to investigate Tmod's function during muscle development in the indirect flight muscle. SPDO was associated with the pointed ends of elongating thin filaments throughout myofibril assembly. Transient overexpression of SPDO during myofibril assembly irreversibly arrested elongation of preexisting thin filaments. However, the lengths of thin filaments assembled after SPDO levels had declined were normal. Flies with a preponderance of abnormally short thin filaments were unable to fly. We conclude that: (a) thin filaments elongate from their pointed ends during myofibril assembly; (b) pointed ends are dynamically capped at endogenous levels of SPDO so as to allow elongation; (c) a transient increase in SPDO levels during myofibril assembly converts SPDO from a dynamic to a permanent cap; and (d) developmental regulation of pointed-end capping during myofibril assembly is crucial for specification of final thin filament lengths, myofibril structure, and muscle function.     

Essential role for IkappaB kinase beta in remodeling Carma1-Bcl10-Malt1 complexes upon T cell activation

T cell receptor (TCR) signaling to IkappaB kinase (IKK)/NF-kappaB is controlled by PKCtheta-dependent activation of the Carma1, Bcl10, and Malt1 (CBM) complex. Antigen-induced phosphorylation of Bcl10 has been reported, but its physiological function is unknown. Here we show that the putative downstream kinase IKKbeta is required for initial CBM complex formation. Further, upon engagement of IKKbeta/Malt1/Bcl10 with Carma1, IKKbeta phosphorylates Bcl10 in the C terminus and thereby interferes with Bcl10/Malt1 association and Bcl10-mediated IKKgamma ubiquitination. Mutation of the IKKbeta phosphorylation sites on Bcl10 enhances expression of NF-kappaB target genes IL-2 and TNFalpha after activation of primary T cells. Thus, our data provide evidence that IKKbeta serves a dual role upstream of its classical substrates, the IkappaB proteins. While being essential for triggering initial CBM complex formation, IKKbeta-dependent phosphorylation of Bcl10 exhibits a negative regulatory role in T cell activation.     

Actin dynamics at pointed ends regulates thin filament length in striated muscle

Regulation of actin dynamics at filament ends determines the organization and turnover of actin cytoskeletal structures. In striated muscle, it is believed that tight capping of the fast-growing (barbed) ends by CapZ and of the slow-growing (pointed) ends by tropomodulin (Tmod) stabilizes the uniform lengths of actin (thin) filaments in myofibrils. Here we demonstrate for the first time that both CapZ and Tmod are dynamic on the basis of the rapid incorporation of microinjected rhodamine-labelled actin (rho-actin) at both barbed and pointed ends and from the photobleaching of green fluorescent protein (GFP)-labelled Tmod. Unexpectedly, the inhibition of actin dynamics at pointed ends by GFP-Tmod overexpression results in shorter thin filaments, whereas the inhibition of actin dynamics at barbed ends by cytochalasin D has no effect on length. These data demonstrate that the actin filaments in myofibrils are relatively dynamic despite the presence of capping proteins, and that regulated actin assembly at pointed ends determines the length of thin filaments.     

Interactions of ADF/cofilin, Arp2/3 complex, capping protein and profilin in remodeling of branched actin filament networks

BACKGROUND: Cellular movements are powered by the assembly and disassembly of actin filaments. Actin dynamics are controlled by Arp2/3 complex, the Wiskott-Aldrich syndrome protein (WASp) and the related Scar protein, capping protein, profilin, and the actin-depolymerizing factor (ADF, also known as cofilin). Recently, using an assay that both reveals the kinetics of overall reactions and allows visualization of actin filaments, we showed how these proteins co-operate in the assembly of branched actin filament networks. Here, we investigated how they work together to disassemble the networks. RESULTS: Actin filament branches formed by polymerization of ATP-actin in the presence of activated Arp2/3 complex were found to be metastable, dissociating from the mother filament with a half time of 500 seconds. The ADF/cofilin protein actophorin reduced the half time for both dissociation of gamma-phosphate from ADP-Pi-actin filaments and debranching to 30 seconds. Branches were stabilized by phalloidin, which inhibits phosphate dissociation from ADP-Pi-filaments, and by BeF3, which forms a stable complex with ADP and actin. Arp2/3 complex capped pointed ends of ATP-actin filaments with higher affinity (Kd approximately 40 nM) than those of ADP-actin filaments (Kd approximately 1 microM), explaining why phosphate dissociation from ADP-Pi-filaments liberates branches. Capping protein prevented annealing of short filaments after debranching and, with profilin, allowed filaments to depolymerize at the pointed ends. CONCLUSIONS: The low affinity of Arp2/3 complex for the pointed ends of ADP-actin makes actin filament branches transient. By accelerating phosphate dissociation, ADF/cofilin promotes debranching. Barbed-end capping proteins and profilin allow dissociated branches to depolymerize from their free pointed ends.     

Molecular dynamics study of interactions between polymorphic actin filaments and gelsolin segment-1

The assembly of protein actin into double-helical filaments promotes many eukaryotic cellular processes that are regulated by actin-binding proteins (ABPs). Actin filaments can adopt multiple conformations, known as structural polymorphism, which possibly influences the interaction between filaments and ABPs. Gelsolin is a Ca²⁺-regulated ABP that severs and caps actin filaments. Gelsolin binding modulates filament structure; however, it is not known how polymorphic actin filament structures influence an interaction of gelsolin S1 with the barbed-end of filament. Herein, we investigated how polymorphic structures of actin filaments affect the interactions near interfaces between the gelsolin segment 1 (S1) domain and the filament barbed-end. Using all-atom molecular dynamics simulations, we demonstrate that different tilted states of subunits modulate gelsolin S1 interactions with the barbed-end of polymorphic filaments. Hydrogen bonding and interaction energy at the filament-gelsolin S1 interface indicate distinct conformations of filament barbed ends, resulting in different interactions of gelsolin S1. This study demonstrates that filament's structural multiplicity plays important roles in the interactions of actin with ABPs.     

Direct electron microscopic visualization of barbed end capping and filament cutting by intestinal microvillar 95-kdalton protein (villin): a new actin assembly assay using the Limulus acrosomal process

We have re-examined the Ca(++)-dependent interaction of an intestinal microvillar 95- kdalton protein (MV-95K) and actin using the isolated acrosomal process bundles from limulus sperm. Making use of the processes as nuclei for assembling actin filaments, we quantitatively and qualitatively examined MV-95K’s effect on filament assembly and on F- actin, both in the presence and in the absence of Ca(++). The acrosomal processes are particularly advantageous for this approach because they nucleate large numbers of filaments, they are extremely stable, and their morphology can be used to determine the polarity of any nucleated filaments. When filament nucleation was initiated in the presence of MV-95K and the absence of Ca(++), there was biased filament assembly from the bundle ends. The calculated elongation rates from both the barbed and pointed filament ends were virtually indistinguishable from control preparations. In the presence of Ca(++), MV-95K completely inhibited filament assembly from the barbed filament end without affecting the initial rate of assembly from the pointed filament end. The inhibition of assembly results from MV-95K binding to and capping the barbed filament end, thereby preventing monomer addition. This indicates that, while MV-95K is a potent nucleator of actin assembly, it is also a potent inhibitor of actin filament elongation. To examine the effects of MV-95K on F-actin in the presence of Ca(++), we developed an assay where MV-95K is added to filaments previously assembled from acrosomal processes without causing filament breakage during mixing. These results clearly demonstrated that rapid filament shortening by MV-95K results through a mechanism of disrupting intrafilament monomer-monomer interactions. Finally, we show that tropomyosin-containing actin filaments are insensitive to cutting, but not to capping, by MV-95K in the presence of Ca(++).     

The organization and regulation of the macrophage actin skeleton

To move, leukocytes extend portions of their cortical cytoplasm as pseudopods. These pseudopods are filled with a three-dimensional actin filament skeleton, the reversible assembly of which in response to receptor stimulation is thought to play a major role in providing the mechanical force for these protrusive movements. The organization of this actin skeleton occurs at different levels within the cell, and a number of macrophage proteins have been isolated and shown to affect the architecture, assembly, stability, and length of actin filaments in vitro. The architecture of cytoplasmic actin is regulated by proteins that cross-link filaments in higher-order structures. Actin-binding protein plays a major role in defining network structure by cross-linking actin filaments into orthogonal networks. Gelsolin may have a central role in regulating network structure. It binds to the sides of actin filaments and severs them, and binds the "barbed" filament end, thereby blocking monomer addition at this end. Gelsolin is activated to bind actin filaments by microM calcium. Dissociation of gelsolin bound on filament ends occurs in the presence of the polyphosphoinositides, PIP and PIP2. Calcium and PIP2 have been shown to be intracellular messengers of cell stimulation.     

Polarity of enteropathogenic Escherichia coli EspA filament assembly and protein secretion

Type III secretion systems (TTSS) are sophisticated macromolecular structures that play an imperative role in bacterial infections and human disease. The TTSS needle complex is conserved among bacterial pathogens and shows broad similarity to the flagellar basal body. However, the TTSS of enteropathogenic and enterohemorrhagic Escherichia coli, two important human enteric pathogens, is unique in that it has an approximately 12-nm-diameter filamentous extension to the needle that is composed of the secreted translocator protein EspA. EspA filaments and flagellar structures have very similar helical symmetry parameters. In this study we investigated EspA filament assembly and the delivery of effector proteins across the bacterial cell wall. We show that EspA filaments are elongated by addition of EspA subunits to the tip of the growing filament. Moreover, EspA filament length is modulated by the availability of intracellular EspA subunits. Finally, we provide direct evidence that EspA filaments are hollow conduits through which effector proteins are delivered to the extremity of the bacterial cell (and subsequently into the host cell).     

Coactosin-Like 1 Antagonizes Cofilin to Promote Lamellipodial Protrusion at the Immune Synapse

Actin depolymerizing factor-homology (ADF-H) family proteins regulate actin filament dynamics at multiple cellular locations. Herein, we have investigated the function of the ADF-H family member coactosin-like 1 (COTL1) in the regulation of actin dynamics at the T cell immune synapse (IS). We initially identified COTL1 in a genetic screen to identify novel regulators of T cell activation, and subsequently found that it associates with F-actin and localizes at the IS in response to TCR+CD28 stimulation. Live cell microscopy showed that depletion of COTL1 protein impaired T cell spreading in response to TCR ligation and abrogated lamellipodial protrusion at the T cell – B cell contact site, producing only a band of F-actin. Significantly, re-expression of wild type COTL1, but not a mutant deficient in F-actin binding could rescue these defects. In addition, COTL1 depletion reduced T cell migration. In vitro studies showed that COTL1 and cofilin compete with each other for binding to F-actin, and COTL1 protects F-actin from cofilin-mediated depolymerization. While depletion of cofilin enhanced F-actin assembly and lamellipodial protrusion at the IS, concurrent depletion of both COTL1 and cofilin restored lamellipodia formation. Taken together, our results suggest that COTL1 regulates lamellipodia dynamics in part by protecting F-actin from cofilin-mediated disassembly.     

Actin-filament stochastic dynamics mediated by ADF/cofilin

BACKGROUND: The rapid dynamics of actin filaments is a fundamental process that powers a large number of cellular functions. However, the basic mechanisms that control and coordinate such dynamics remain a central question in cell biology. To reach beyond simply defining the inventory of molecules that control actin dynamics and to understand how these proteins act synergistically to modulate filament turnover, we combined evanescent-wave microscopy with a biomimetic system and followed the behavior of single actin filaments in the presence of a physiologically relevant mixture of accessory proteins. This approach allows for the real-time visualization of actin polymerization and age-dependent filament severing. RESULTS: In the presence of actin-depolymerizing factor (ADF)/cofilin and profilin, actin filaments with a processive formin attached at their barbed ends were observed to oscillate between stochastic growth and shrinkage phases. Fragmentation of continuously growing actin filaments by ADF/cofilin is the key mechanism modulating the prominent and frequent shortening events. The net effect of continuous actin polymerization, driven by a processive formin that uses profilin-actin, and of ADF/cofilin-mediating severing that trims the aged ends of the growing filaments is an up to 155-fold increase in the rate of actin-filament turnover in vitro in comparison to that of actin alone. Lateral contact between actin filaments dampens the dynamics and favors actin-cable formation. A kinetic simulation accurately validates these observations. CONCLUSIONS: Our proposed mechanism for the control of actin dynamics is dominated by ADF/cofilin-mediated filament severing that induces a stochastic behavior upon individual actin filaments. When combined with a selection process that stabilizes filaments in bundles, this mechanism could account for the emergence and extension of actin-based structures in cells.     

Mechanisms of formin-mediated actin assembly and dynamics

Cellular viability requires tight regulation of actin cytoskeletal dynamics. Distinct families of nucleation-promoting factors enable the rapid assembly of filament nuclei that elongate and are incorporated into diverse and specialized actin-based structures. In addition to promoting filament nucleation, the formin family of proteins directs the elongation of unbranched actin filaments. Processive association of formins with growing filament ends is achieved through continuous barbed end binding of the highly conserved, dimeric formin homology (FH) 2 domain. In cooperation with the FH1 domain and C-terminal tail region, FH2 dimers mediate actin subunit addition at speeds that can dramatically exceed the rate of spontaneous assembly. Here, I review recent biophysical, structural, and computational studies that have provided insight into the mechanisms of formin-mediated actin assembly and dynamics.     

Antigen-specific CD4 effector T cells: Analysis of factors regulating clonal expansion and cytokine production: Clonal expansion and cytokine production by CD4 effector T cells

In order to fully understand T cell-mediated immunity, the mechanisms that regulate clonal expansion and cytokine production by CD4⁺ antigen-specific effector T cells in response to a wide range of antigenic stimulation needs clarification. For this purpose, panels of antigen-specific CD4⁺ T cell clones with different thresholds for antigen-induced proliferation were generated by repeated stimulation with high- or low-dose antigen. Differences in antigen sensitivities did not correlate with expression of TCR, CD4, adhesion or costimulatory molecules. There was no significant difference in antigen-dependent cytokine production by TG40 cells transfected with TCR obtained from either high- or low-dose-responding T cell clones, suggesting that the affinity of TCRs for their ligands is not primary determinant of T cell antigen reactivity. The proliferative responses of all T cell clones to both peptide stimulation and to TCRβ crosslinking revealed parallel dose-response curves. These results suggest that the TCR signal strength of effector T cells and threshold of antigen reactivity is determined by an intrinsic property, such as the TCR signalosome and/or intracellular signaling machinery. Finally, the antigen responses of high- and low-peptide-responding T cell clones reveal that clonal expansion and cytokine production of effector T cells occur independently of antigen concentration. Based on these results, the mechanisms underlying selection of high “avidity” effector and memory T cells in response to pathogen are discussed.