Bacteriophage T4 and human type I DNA ligases relax DNA under joining conditions.

Both bacteriophage T4 and human type I DNA ligases in the presence of a mixture of ATP, AMP and PPi altered the topological properties of a supercoiled substrate by a step-wise reaction eventually leading to a population of fully relaxed, covalently closed products. In the presence of only AMP and PPi DNA products containing nicks with 3'OH/5'P termini accumulated in the presence of bacteriophage T4 DNA ligase, suggesting reversal of the entire joining reaction, but not in the presence of human DNA ligase I. Both DNA ligases became deoxyadenylylated in the presence of dATP, but the joining reaction did not proceed to completion. However, with both enzymes the full relaxing reaction took place in the presence of dAMP alone and in the presence of a mixture of dATP, dAMP and PPi. In no case could the joining reaction be reversed by dAMP and PPi. Related experiments with modified derivatives of deoxyribonucleoside 5'-triphosphates and PPi gave results in accord with these observations. The AMP dependent DNA relaxation catalysed by DNA ligases was insensitive to the presence of exonuclease III. These results indicate that controlled relaxation of the substrate by both DNA ligases occurs as a separate reaction rather than by simple reversal of the joining reaction. These findings support the hypothesis that in vivo the DNA topoisomerising ligases relax their substrate at the replication fork both during and separately from ligation of a pre-existing nick.     

DNA ligases from rat liver. Purification and partial characterization of two molecular forms

The differential ability of mammalian DNA ligases to use oligo(dT).poly(rA) as a substrate has been used to detect, and thereby extensively purify, two immunologically distinct forms of DNA ligase from rat liver. The activity of DNA ligase I, which is unable to use this template, is uniquely increased during liver regeneration, while that of DNA ligase II remains at a low level. Both enzymes require ATP and Mg2+ for activity and form an adenylylated intermediate which is stable and reactive. After SDS-PAGE, such radiolabeled complexes correspond to polypeptides of 130,000 and 80,000 Da for DNA ligase I and to 100,000 Da for DNA ligase II. That these labeled polypeptides do indeed correspond to active polypeptides of two different forms of DNA ligase is shown by the removal of the radiolabeled AMP, only when the intermediate is incubated with an appropriate substrate. In contrast to other eukaryotic DNA ligases, rat liver DNA ligase II has a lower Km for ATP (1.2 X 10(-5) M) than DNA ligase I (6 X 10(-5) M). Also, DNA ligase II can use ATP alpha S as a cofactor in the ligation reaction much more efficiently than DNA ligase I, further discriminating the ATP binding sites of these enzymes. Finally, antibodies raised against the 130,000-Da polypeptide of DNA ligase I specifically recognize this species in an immunoblot and inhibit only the activity of DNA ligase I.     

Purification of wheat germ RNA ligase. II. Mechanism of action of wheat germ RNA ligase

The mechanism of action of purified wheat germ RNA ligase has been examined. ATP was absolutely required for the ligation of substrates containing 5'-OH or 5'-P and 2',3'-cyclic P or 2'-P termini. Ligation of 1 mol of 5'-P-2',3'-cyclic P-terminated poly(A) was accompanied by the hydrolysis of 1 mol of ATP to 1 mol each of AMP and PPi. Purified RNA ligase catalyzed an ATP-PPi exchange reaction, specific for ATP and dATP, and formed a covalent enzyme-adenylate complex that was detected by autoradiography following incubation with [alpha-32P]ATP and separation of the products by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. A protein doublet with a molecular weight of approximately 110 kDa, the major product detected by silver staining, was labeled in these reactions. Isolated E-AMP complex was dissociated by the addition of ligatable poly(A), containing 5'-P-2',3'-cyclic P termini, to yield AMP and by the addition of PPi to yield ATP. The unique feature of the reactions leading to an exchange reaction between ATP and PPi and to the formation of an E-AMP complex was their marked stimulation (up to 400-fold) by the addition of RNA. This property distinguishes the wheat germ RNA ligase from other known RNA and DNA ligases which catalyze ATP-PPi exchange reactions and form E-AMP complexes in the absence of substrate. Thus, RNA appears to function in two capacities in the wheat germ system: as a cofactor, to stimulate the reaction of the enzyme with ATP, and as an authentic substrate for ligation.     

Repair of DNA strand gaps and nicks containing 3'-phosphate and 5'-hydroxyl termini by purified mammalian enzymes.

A putative role for mammalian polynucleotide kinases that possess both 5'-phosphotransferase and 3'-phosphatase activity is the restoration of DNA strand breaks with 5'-hydroxyl termini or 3'-phosphate termini, or both, to a form that supports the subsequent action of DNA repair polymerases and DNA ligases, i.e. 5'-phosphate and 3'-hydroxyl termini. To further assess this possibility, we compared the activity of the 3'-phosphatase of purified calf thymus polynucleotide kinase towards a variety of substrates. The rate of removal of 3'-phosphate groups from nicked or short (1 nt) gapped sites in double-stranded DNA was observed to be similar to that of 3'-phosphate groups from single-stranded substrates. Thus this activity of polynucleotide kinase does not appear to be influenced by steric accessibility of the phosphate group. We subsequently demonstrated that the concerted reactions of polynucleotide kinase and purified human DNA ligase I could efficiently repair DNA nicks possessing 3'-phosphate and 5'-hydroxyl termini, and similarly the combination of these two enzymes together with purified rat DNA polymerase beta could seal a strand break with a 1 nt gap. With a substrate containing a nick bounded by 3'- and 5'-OH termini, the rate of gap filling by polymerase beta was significantly enhanced in the presence of polynucleotide kinase and ATP, indicating the positive influence of 5'-phosphorylation. The reaction was further enhanced by addition of DNA ligase I to the reaction mixture. This is due, at least in part, to an enhancement by DNA ligase I of the rate of 5'-phosphorylation catalyzed by polynucleotide kinase.     

DNA and RNA ligases: structural variations and shared mechanisms

DNA and RNA ligases join 3' OH and 5' PO4 ends in polynucleotide substrates using a three-step reaction mechanism that involves covalent modification of both the ligase enzyme and the polynucleotide substrate with AMP. In the past three years, several polynucleotide ligases have been crystallized in complex with nucleic acid, providing the introductory views of ligase enzymes engaging their substrates. Crystal structures for two ATP-dependent DNA ligases, an NAD+-dependent DNA ligase, and an ATP-dependent RNA ligase demonstrate how ligases utilize the AMP group and their multi-domain architectures to manipulate nucleic acid structure and catalyze the end-joining reaction. Together with unliganded crystal structures of DNA and RNA ligases, a more comprehensive and dynamic understanding of the multi-step ligation reaction mechanism has emerged.     

Development of a fluorescence resonance energy transfer assay for measuring the activity of Streptococcus pneumoniae DNA ligase,an enzyme essential for DNA replication,repair, and recombination

DNA ligase is an enzyme essential for DNA replication, repair, and recombination in all organisms. Bacterial DNA ligases catalyze a NAD(+)-dependent DNA ligation reaction, i.e., the formation of a phosphodiester bond between adjacent 3'-OH and 5'-phosphate termini of dsDNA. Due to their essential nature, unique cofactor requirement, and widespread existence in nature, bacterial DNA ligases appear to be valuable targets for identifying novel antibacterial agents. To explore bacterial DNA ligases as antibacterial targets and further characterize them, we developed a simple, robust, homogeneous time-resolved fluorescence resonance energy transfer assay (TR-FRET) for measuring Streptococcus pneumoniae DNA ligase activity. This assay involves the use of one dsDNA molecule labeled with biotin and another dsDNA molecule labeled with Cy5, an acceptor fluorophore. During ligation reactions, the donor fluorophore europium (Eu(3+)) labeled with streptavidin was added to the assay mixtures, which bound to the biotin label on the ligated products. This in turn resulted in the FRET from Eu(3+) to Cy5 due to their close proximity. The formation of ligation products was measured by monitoring the emission at 665nm. This assay was validated by the experiments showing that the DNA ligase activity required NAD(+) and MgCl(2), and was inhibited by NMN and AMP, products of the ligase reaction. Using this assay, we determined the K(m) values of the enzyme for dsDNA substrates and NAD(+), and the IC(50) values of NMN and AMP, examined the effects of MgCl(2) and PEG(8000) on the enzyme activity, optimized the concentrations of Eu(3+) in the assay, and validated its utilities for high-throughput screening and biochemical characterizations of this class of enzymes.     

Influence of polyethylene glycol on the ligation reaction with calf thymus DNA ligases I and II

High concentrations of the nonspecific macromolecule polyethylene glycol 6000 (PEG 6000) enabled DNA ligases I and II from calf thymus to catalyze intermolecular blunt-end ligation of duplex DNA. Intermolecular cohesive-end ligation with these enzymes was markedly stimulated in the presence of 10-16% (w/v) PEG 6000. The effect of PEG 6000 (4-16%) on the sealing of single-stranded breaks in duplex DNA with DNA ligases I and II was not appreciably stimulatory but rather inhibitory. PEG 6000 (15%) enhanced more twofold the rate of DNA ligase II-AMP complex formation, but moderately suppressed the rate of formation of DNA ligase 1-AMP complex. Polyamines and KCl inhibited blunt-end and cohesive-end ligations with DNA ligases I and II in the presence of PEG 6000.     

Determination of the free-energy change for repair of a DNA phosphodiester bond

The repair of phosphodiester bonds in nicked DNA is catalyzed by DNA ligases. Ligation is coupled to cleavage of a phosphoanhydride bond in a nucleotide cofactor resulting in a thermodynamically favorable process. A free energy value for phosphodiester bond formation was calculated using the reversibility of the T4 DNA ligase reaction. The relative number of DNA nicks to phosphodiester bonds in a circular plasmid DNA, formed during this reaction at fixed concentrations of ATP to AMP and PP(i), was quantified. At 25 degrees C, pH 7, the equilibrium constant (K(eq)) for the ligation reaction is 3.89 x 10(4) m. This value corresponds to a standard free energy (DeltaG degrees ') of -6.3 kcal mol(-1). By subtracting the known energy contribution due to hydrolysis of ATP to AMP and PP(i), DeltaG degrees ' for the hydrolysis of a DNA phosphodiester bond is -5.3 kcal mol(-1).     

Identification of essential residues in Thermus thermophilus DNA ligase.

DNA ligases play a pivotal role in DNA replication, repair and recombination. Reactions catalyzed by DNA ligases consist of three steps: adenylation of the ligase in the presence of ATP or NAD+, transferring the adenylate moiety to the 5'-phosphate of the nicked DNA substrate (deadenylation) and sealing the nick through the formation of a phosphodiester bond. Thermus thermophilus HB8 DNA ligase (Tth DNA ligase) differs from mesophilic ATP-dependent DNA ligases in three ways: (i) it is NAD+ dependent; (ii) its optimal temperature is 65 instead of 37 degrees C; (iii) it has higher fidelity than T4 DNA ligase. In order to understand the structural basis underlying the reaction mechanism of Tth DNA ligase, we performed site-directed mutagenesis studies on nine selected amino acid residues that are highly conserved in bacterial DNA ligases. Examination of these site-specific mutants revealed that: residue K118 plays an essential role in the adenylation step; residue D120 may facilitate the deadenylation step; residues G339 and C433 may be involved in formation of the phosphodiester bond. This evidence indicates that a previously identified KXDG motif for adenylation of eukaryotic DNA ligases [Tomkinson, A.E., Totty, N.F., Ginsburg, M. and Lindahl, T. (1991) Proc. Natl. Acad. Sci. USA, 88, 400-404] is also the adenylation site for NAD+-dependent bacterial DNA ligases. In a companion paper, we demonstrate that mutations at a different Lys residue, K294, may modulate the fidelity of Tth DNA ligase.     

Kinetic mechanism of the Mg2+-dependent nucleotidyl transfer catalyzed by T4 DNA and RNA ligases.

The Mg(2+)-dependent adenylylation of the T4 DNA and RNA ligases was studied in the absence of a DNA substrate using transient optical absorbance and fluorescence spectroscopy. The concentrations of Mg(2+), ATP, and pyrophosphate were systematically varied, and the results led to the conclusion that the nucleotidyl transfer proceeds according to a two-metal ion mechanism. According to this mechanism, only the di-magnesium-coordinated form Mg(2)ATP(0) reacts with the enzyme forming the covalent complex E.AMP. The reverse reaction (ATP synthesis) occurs between the mono-magnesium-coordinated pyrophosphate form MgP(2)O(7)(2-) and the enzyme.MgAMP complex. The nucleotide binding rate decreases in the sequence ATP(4-) > MgATP(2-) > Mg(2)ATP(0), indicating that the formation of the non-covalent enzyme.nucleotide complex is driven by electrostatic interactions. T4 DNA ligase shows notably higher rates of ATP binding and of subsequent adenylylation compared with RNA ligase, in part because it decreases the K(d) of Mg(2+) for the enzyme-bound Mg(2)ATP(0) more than 10-fold. To elucidate the role of Mg(2+) in the nucleotidyl transfer catalyzed by T4 DNA and RNA ligases, we propose a transition state configuration, in which the catalytic Mg(2+) ion coordinates to both reacting nucleophiles: the lysyl moiety of the enzyme that forms the phosphoramidate bond and the alpha-beta-bridging oxygen of ATP.     

DNA ligase I from Saccharomyces cerevisiae: physical and biochemical characterization of the CDC9 gene product.

Genetic studies have previously demonstrated that the Saccharomyces cerevisiae CDC9 gene product, which is functionally homologous to mammalian DNA ligase I, is required for DNA replication and is also involved in DNA repair and genetic recombination. In the present study we have purified the yeast enzyme. When measured under denaturing conditions, Cdc9 protein has a polypeptide molecular mass of 87 kDa. The native form of the enzyme is an 80-kDa asymmetric monomer. Both estimates are in good agreement with the M(r) = 84,406 predicted from the translated sequence of the CDC9 gene. Cdc9 DNA ligase acts via the same basic reaction mechanism employed by all known ATP-dependent DNA ligases. The catalytic functions reside in a 70-kDa C-terminal domain that is conserved in mammalian DNA ligase I and in Cdc17 DNA ligase from Schizosaccharomyces pombe. The ATP analog ATP alpha S inhibits the ligation reaction, although Cdc9 protein does form an enzyme-thioadenylate intermediate. Since Cdc9 DNA ligase exhibited the same substrate specificity as mammalian DNA ligase I, this enzyme can be considered to be the DNA ligase I of S. cerevisiae. There is genetic evidence suggesting that DNA ligase may be directly involved in error-prone DNA repair. We examined the ability of Cdc9 DNA ligase to join nicks with mismatches at the termini. Mismatches at the 5' termini of nicks had very little effect on ligation, whereas mismatches opposite a purine at 3' termini inhibited DNA ligation. The joining of DNA molecules with mismatched termini by DNA ligase may be responsible for the generation of mutations.     

Effects of deletion and site-directed mutations on ligation steps of NAD+-dependent DNA ligase: a biochemical analysis of BRCA1 C-terminal domain

DNA strand joining entails three consecutive steps: enzyme adenylation to form AMP-ligase, substrate adenylation to form AMP-DNA, and nick closure. In this study, we investigate the effects on ligation steps by deletion and site-directed mutagenesis of the BRCA1 C-terminal (BRCT) domain using NAD(+)-dependent DNA ligase from Thermus species AK16D. Deletion of the BRCT domain resulted in substantial loss of ligation activity, but the mutant was still able to form an AMP-ligase intermediate, suggesting that the defects caused by deletion of the entire BRCT domain occur primarily at steps after enzyme adenylation. The lack of AMP-DNA accumulation by the domain deletion mutant as compared to the wild-type ligase indicates that the BRCT domain plays a role in the substrate adenylation step. Gel mobility shift analysis suggests that the BRCT domain and helix-hairpin-helix subdomain play a role in DNA binding. Similar to the BRCT domain deletion mutant, the G617I mutant showed a low ligation activity and lack of accumulation of AMP-DNA intermediate. However, the G617I mutant was only weakly adenylated, suggesting that a point mutation in the BRCT domain could also affect the enzyme adenylation step. The significant reduction of ligation activity by G634I appears to be attributable to a defect at the substrate adenylation step. The greater ligation of mismatched substrates by G638I is accountable by accelerated conversion of the AMP-DNA intermediate to a ligation product at the final nick closure step. The mutational effects of the BRCT domain on ligation steps in relation to protein-DNA and potential protein-protein interactions are discussed.     

Mechanistic and kinetic study of the ATP-dependent DNA ligase of Neisseria meningitidis

The gene from Neisseria meningitidis serogroup A, encoding a putative, secreted ATP-dependent DNA ligase was cloned and overexpressed, and the soluble protein was purified. Mass spectrometry indicated that the homogeneous protein was adenylated as isolated, and sedimentation velocity experiments suggested that the enzyme exists as a monomer in solution. The 31.5 kDa protein can catalyze the ATP-dependent ligation of a singly nicked DNA duplex but not blunt-end joining. The first step of the overall reaction, the ATP-dependent formation of an adenylated ligase, was studied by measuring the formation of the covalent intermediate and isotope exchange between [alpha-32P] ATP and PPi. Mg2+ was absolutely required for this reaction and was the best divalent cation to promote catalysis. Electrophoretic gel mobility shift assays revealed that the enzyme bound both unnicked and singly nicked double stranded DNA with equivalent affinity (Kd approximately 50 nM) but cannot bind single stranded DNA. Preadenylated DNA was synthesized by transferring the AMP group from the enzyme to the 5'-phosphate of a 3'-dideoxy nicked DNA. The rate of phosphodiester bond formation at the preadenylated nick was also Mg(2+)-dependent. Kinetic data showed that the overall rate of ligation, which occurred at 0.008 s(-1), is the result of three chemical steps with similar rate constants (approximately 0.025 s(-1)). The Km values for ATP and DNA substrates, in the overall ligation reaction, were 0.4 microM and 30 nM, respectively.     

The enzymatic conversion of 3'-phosphate terminated RNA chains to 2',3'-cyclic phosphate derivatives

The enzyme, RNA cyclase, has been purified from cell-free extracts of HeLa cells approximately 6000-fold. The enzyme catalyzes the conversion of 3'-phosphate ends of RNA chains to the 2',3'-cyclic phosphate derivative in the presence of ATP or adenosine 5'-(gamma-thio)triphosphate (ATP gamma S) and Mg2+. The formation of 1 mol of 2',3'-cyclic phosphate ends is associated with the disappearance of 1 mol of 3'-phosphate termini and the hydrolysis of 1 mol of ATP gamma S to AMP and thiopyrophosphate. No other nucleotides could substitute for ATP or ATP gamma S in the reaction. The reaction catalyzed by RNA cyclase was not reversible and exchange reactions between [32P]pyrophosphate and ATP were not detected. However, an enzyme-AMP intermediate could be identified that was hydrolyzed by the addition of inorganic pyrophosphate or 3'-phosphate terminated RNA chains but not by 3'-OH terminated chains or inorganic phosphate. 3'-[32P](Up)10Gp* could be converted to a form that yielded, (Formula: see text) after degradation with nuclease P1, by the addition of wheat germ RNA ligase, 5'-hydroxylpolynucleotide kinase, RNA cyclase, and ATP. This indicates that the RNA cyclase had catalyzed the formation of the 2',3'-cyclic phosphate derivative, the kinase had phosphorylated the 5'-hydroxyl end of the RNA, and the wheat germ RNA ligase had catalyzed the formation of a 3',5'-phosphodiester linkage concomitant with the conversion of the 2',3'-cyclic end to a 2'-phosphate terminated residue.     

A high-throughput assay for the adenylation reaction of bacterial DNA ligase

DNA ligase catalyzes the closure of single-strand nicks in double-stranded DNA that arise during replication and recombination. Inhibition of bacterial ligase is expected to cause chromosome degradation and cell death, making it an attractive target for new antibacterials. The prototypical bacterial ligase couples the hydrolysis of NAD(+) to phosphodiester bond formation between an adjacent 3'OH and 5'-terminal phosphate of nicked duplex DNA. The first step is the reversible formation of a ligase-adenylate from the reaction between apoenzyme and NAD(+). Inhibitors that compete with NAD(+) are expected to be bacterial specific because eukaryotic DNA ligases use ATP and differ in the sequence composition of their adenylation domain. We report here a high-throughput assay that measures the adenylation reaction specifically by monitoring ligase-AMP formation via scintillation proximity technologies. Escherichia coli DNA ligase was biotinylated in vivo; after reaction with radiolabeled NAD(+), ligase-[(3)H]AMP could be captured onto the streptavidin-coated surface of the solid scintillant. The method was ideal for high-throughput screening because it required minimal manipulations and generated a robust signal with minimal scatter. Certain adenosine analogs were found to inhibit the adenylation assay and had similar potency of inhibition in a DNA ligation assay.     

Structure-function analysis of Methanobacterium thermoautotrophicum RNA ligase - engineering a thermostable ATP independent enzyme

ABSTRACT: BACKGROUND: RNA ligases are essential reagents for many methods in molecular biology including NextGen RNA sequencing. To prevent ligation of RNA to itself, ATP independent mutant ligases, defective in self-adenylation, are often used in combination with activated pre-adenylated linkers. It is important that these ligases not have de-adenylation activity, which can result in activation of RNA and formation of background ligation products. An additional useful feature is for the ligase to be active at elevated temperatures. This has the advantage or reducing preferences caused by structures of single-stranded substrates and linkers. RESULTS: To create an RNA ligase with these desirable properties we performed mutational analysis of the archaeal thermophilic RNA ligase from Methanobacterium thermoautotrophicum. We identified amino acids essential for ATP binding and reactivity but dispensable for phosphodiester bond formation with 5' pre-adenylated donor substrate. The motif V lysine mutant (K246A) showed reduced activity in the first two steps of ligation reaction. The mutant has full ligation activity with pre-adenylated substrates but retained the undesirable activity of deadenylation, which is the reverse of step 2 adenylation. A second mutant, an alanine substitution for the catalytic lysine in motif I (K97A) abolished activity in the first two steps of the ligation reaction, but preserved wild type ligation activity in step 3. The activity of the K97A mutant is similar with either pre-adenylated RNA or single-stranded DNA (ssDNA) as donor substrates but we observed two-fold preference for RNA as an acceptor substrate compared to ssDNA with an identical sequence. In contrast, truncated T4 RNA ligase 2, the commercial enzyme used in these applications, is significantly more active using pre-adenylated RNA as a donor compared to pre-adenylated ssDNA. However, the T4 RNA ligases are ineffective in ligating ssDNA acceptors. CONCLUSIONS: Mutational analysis of the heat stable RNA ligase from Methanobacterium thermoautotrophicum resulted in the creation of an ATP independent ligase. The K97A mutant is defective in the first two steps of ligation but retains full activity in ligation of either RNA or ssDNA to a pre-adenylated linker. The ability of the ligase to function at 65 deg C should reduce the constraints of RNA secondary structure in RNA ligation experiments.     

Transcriptional activation of microRNA-34a by NF-kappa B in human esophageal cancer cells

Background

RNA ligases are essential reagents for many methods in molecular biology including NextGen RNA sequencing. To prevent ligation of RNA to itself, ATP independent mutant ligases, defective in self-adenylation, are often used in combination with activated pre-adenylated linkers. It is important that these ligases not have de-adenylation activity, which can result in activation of RNA and formation of background ligation products. An additional useful feature is for the ligase to be active at elevated temperatures. This has the advantage or reducing preferences caused by structures of single-stranded substrates and linkers.

Results

To create an RNA ligase with these desirable properties we performed mutational analysis of the archaeal thermophilic RNA ligase from Methanobacterium thermoautotrophicum. We identified amino acids essential for ATP binding and reactivity but dispensable for phosphodiester bond formation with 5’ pre-adenylated donor substrate. The motif V lysine mutant (K246A) showed reduced activity in the first two steps of ligation reaction. The mutant has full ligation activity with pre-adenylated substrates but retained the undesirable activity of deadenylation, which is the reverse of step 2 adenylation. A second mutant, an alanine substitution for the catalytic lysine in motif I (K97A) abolished activity in the first two steps of the ligation reaction, but preserved wild type ligation activity in step 3. The activity of the K97A mutant is similar with either pre-adenylated RNA or single-stranded DNA (ssDNA) as donor substrates but we observed two-fold preference for RNA as an acceptor substrate compared to ssDNA with an identical sequence. In contrast, truncated T4 RNA ligase 2, the commercial enzyme used in these applications, is significantly more active using pre-adenylated RNA as a donor compared to pre-adenylated ssDNA. However, the T4 RNA ligases are ineffective in ligating ssDNA acceptors.

Conclusions

Mutational analysis of the heat stable RNA ligase from Methanobacterium thermoautotrophicum resulted in the creation of an ATP independent ligase. The K97A mutant is defective in the first two steps of ligation but retains full activity in ligation of either RNA or ssDNA to a pre-adenylated linker. The ability of the ligase to function at 65°C should reduce the constraints of RNA secondary structure in RNA ligation experiments.     

Fingerprinting of near-homogeneous DNA ligase I and II from human cells. Similarity of their AMP-binding domains

DNA ligases play obligatory roles during replication, repair, and recombination. Multiple forms of DNA ligase have been reported in mammalian cells including DNA ligase I, the high molecular mass species which functions during replication, and DNA ligase II, the low molecular mass species which is associated with repair. In addition, alterations in DNA ligase activities have been reported in acute lymphocytic leukemia cells, Bloom's syndrome cells, and cells undergoing differentiation and development. To better distinguish the biochemical and molecular properties of the various DNA ligases from human cells, we have developed a method of purifying multiple species of DNA ligase from HeLa cells by chromatography through DEAE-Bio-Gel, CM-Bio-Gel, hydroxylapatite, Sephacryl S-300, Mono P, and DNA-cellulose. DNA-cellulose chromatography of the partially purified enzymes resolved multiple species of DNA ligase after labeling the enzyme with [alpha-32P]ATP to form the ligase-[32P]AMP adduct. The early eluting enzyme activity (0.25 M NaCl) contained a major 67-kDa-labeled protein, while the late eluting activity (0.48 M NaCl) contained two major labeled proteins of 90 and 78 kDa. Neutralization experiments with antiligase I antibodies indicated that the early and late eluting activity peaks were DNA ligase II and I, respectively. The three major ligase-[32P]AMP polypeptides (90, 78, and 67 kDa) were subsequently purified to near homogeneity by elution from preparative sodium dodecyl sulfate-polyacrylamide gels. All three polypeptides retained DNA ligase activities after gel elution and renaturation. To further reveal the relationship between these enzymes, partial digestion by V8-protease was performed. All three purified polypeptides gave rise to a common 22-kDa-labeled fragment for their AMP-binding domains, indicating that the catalytic sites of ligase I and II are quite similar, if not identical. Similar findings were obtained from the two-dimensional gel electrophoresis of their AMP-binding domains in the trypsin-digested protein fragments. The results also suggested that these isozymes have been derived from the same primordial DNA sequence or from the same precursor protein. The purification scheme and the data obtained will be instrumental for the further elucidation of the biological roles of various DNA ligases from human cells.     

DNA ligases in the repair and replication of DNA

DNA ligases are critical enzymes of DNA metabolism. The reaction they catalyse (the joining of nicked DNA) is required in DNA replication and in DNA repair pathways that require the re-synthesis of DNA.Most organisms express DNA ligases powered by ATP, but eubacteria appear to be unique in having ligases driven by NAD(+). Interestingly, despite protein sequence and biochemical differences between the two classes of ligase, the structure of the adenylation domain is remarkably similar. Higher organisms express a variety of different ligases, which appear to be targetted to specific functions. DNA ligase I is required for Okazaki fragment joining and some repair pathways; DNA ligase II appears to be a degradation product of ligase III; DNA ligase III has several isoforms, which are involved in repair and recombination and DNA ligase IV is necessary for V(D)J recombination and non-homologous end-joining. Sequence and structural analysis of DNA ligases has shown that these enzymes are built around a common catalytic core, which is likely to be similar in three-dimensional structure to that of T7-bacteriophage ligase. The differences between the various ligases are likely to be mediated by regions outside of this common core, the structures of which are not known. Therefore, the determination of these structures, along with the structures of ligases bound to substrate DNAs and partner proteins ought to be seen as a priority.     

NAD+ is not utilized as a co-factor for DNA ligation by human DNA ligase IV

As nucleotidyl transferases, formation of a covalent enzyme-adenylate intermediate is a common first step of all DNA ligases. While it has been shown that eukaryotic DNA ligases utilize ATP as the adenylation donor, it was recently reported that human DNA ligase IV can also utilize NAD⁺ and, to a lesser extent ADP-ribose, as the source of the adenylate group and that NAD⁺, unlike ATP, enhances ligation by supporting multiple catalytic cycles. Since this unexpected finding has significant implications for our understanding of the mechanisms and regulation of DNA double strand break repair, we attempted to confirm that NAD⁺ and ADP-ribose can be used as co-factors by human DNA ligase IV. Here, we provide evidence that NAD⁺ does not enhance ligation by pre-adenylated DNA ligase IV, indicating that this co-factor is not utilized for re-adenylation and subsequent cycles of ligation. Moreover, we find that ligation by de-adenylated DNA ligase IV is dependent upon ATP not NAD⁺ or ADP-ribose. Thus, we conclude that human DNA ligase IV cannot use either NAD⁺ or ADP-ribose as adenylation donor for ligation.