Myelin Impregnation: An Improved Golgi-Cox Modification

Optic tecta of goldfish were coated with egg yolk and immersed for only one week in one of the following impregnation fluids: a) Solution A + B; A = 1 g K₂Cr₂O₇ and 1 g HgCl₂ boiled for 15 min in 85 ml distilled water and allowed to cool; B = 0.8 g K₂Cr₂O₇ and 0.5 g KWO₄ dissolved in 20 ml distilled water, b) Solution A + B two volumes diluted with boiled distilled water, c) Solution A + B four volumes diluted with boiled distilled water. Each tectum was immersed 6 hr in 100 ml distilled water containing 0.5 g LiOH and 15 g KNO₃, washed 18 hr in 500 ml 0.2% acetic acid, dehydrated with ethanol, and embedded in low viscosity nitro cellulose. Sections were cut at 100 pm with a rotary microtome after clearing with cedarwood oil. Methods b) and c) have two advantages compared with method a), the original Golgi-Cox method. First, more cells are impregnated, especially in the layers extending 200-400 μm below the surface, and dendrites as well as unmyelinated axons are well impregnated. Second, myelin sheaths are impregnated and can be recognized by their peculiar chain-like appearance. The described Golgi-Cox modification offers an appropriate method to study the morphology of superficially located nervous tissue.     

Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

Basic Dye Counterstaining of Sections Impregnated by the Golgi-Cox Method

Celloidin blocks of Golgi-Cox impregnated material are cut at 50 μ, the sections collected in 70% alcohol, transferred to a 3:1 mixture of absolute alcohol and chloroform for 2 min, and then stored in xylene or toluene for at least 3 min, or up to 2 wk until processed further. Mounting is done on glass slides which have been coated with fresh egg albumen diluted in 0.2% ammonia water (or a 0.5% solution of dry powdered egg albumen) and then dried at 60°C overnight. For attachment to these coated slides, sections are first soaked for 2-3 min in a freshly prepared mixture of methyl benzoate, 50 ml; benzyl alcohol, 200 ml; chloroform, 150 ml; and then transferred quickly to the slides by means of a brush. After 2-3 min the chloroform evaporates and the celloidin softens. The slides are then immersed in toluene which hardens the celloidin and anchors the sections to the slides. Alcohols of descending concentrations to 40% are followed by alkalinizations, first in: absolute alcohol, 40 ml; strong ammonia water 60 ml, for 2 min, then in: absolute alcohol, 70 ml; strong ammonia water, 30 ml, for 1 hr. Excess alkali is then removed by 70% and 40% alcohol, 2 min each, and a 10 min wash in running tap water. Bleaching in 1% Na₂S₂O₃, for 10 min and washing again in tap water for 10 min completes the process preliminary to staining. The preparations are then stained for 90 min in an aqueous solution of either 0.5% cresylecht violet, neutral red, or Darrow red, buffered at pH 3.6. Dehydration and differentiation in ascending grades of alcohol, clearing with toluene or xylene, and applying a cover glass with a mounting medium having a refractive index of about 1.61 completes the process.     

Perfusion method for preparing pig brain cortex for Golgi-Cox impregnation

The perfusion procedure described in this paper produces high quality impregnation of pig visual and somatosensory cortical neurons with a Golgi-Cox solution. Starting within 30 min after death, pig heads were perfused with a fixative solution composed of a mixture (v/v) of liquid phenol, 5%; formalin, 14%; ethylene glycol, 25%; methanol, 28%; and water, 28% for two periods of 4 hr each. After perfusion, the heads were chilled for at least 18 hr. The entire brain was removed from the skull and then placed in 10% buffered formalin, where it remained for at least 10 days before taking the blocks that were to be immersed in the Golgi-Cox solution. Three weeks spent in the Golgi-Cox solution typically produced uniform neuron impregnation. The tissue blocks were then embedded in celloidin and sectioned at 120 micron. This procedure avoids the following difficulties: Golgi-Cox methods that produced excellent results with rodent or primate tissue were unsuccessful with pig tissue, placing fresh tissue in Golgi-Cox solution resulted in incomplete neuron impregnation, and immersion fixation in 10% buffered formalin without perfusion resulted in excessive staining of glia.     

Differentiation of Articular and Epiphysial Cartilage, Based on Resorcin-CrystaeL Violet and Picro-Fuchsin Staining of Chondroitin Sulphate and Keratosulphate

Formalin-fixed, decalcified knee joints of young vertebrates were embedded in paraffin wax and cut at 4 μ. Sections were stained in Harris' Haematoxylin, washed in tap water, then immersed in the following staining solution for 60 min: crystal violet, 1 gm; resorcin, 2 gm; distilled water, 100 ml; boiled for 3 min, with constant stirring. After adding 30 ml of 30% FeCl₃, it was boiled for 3 min more. The solution was filtered. The precipitate was washed oil with 50 ml of distilled water and 100 ml of absolute alcohol added. This was combined with the original filtrate and boiled for 5 min. The solution was filtered once more, the precipitate discarded and 2 ml of cone. HC1 added. After cooling, the solution was ready for use. Sections were then washed briefly in tap water, stained in van Gieson's picro-fuchsin for 2 min, and differentiated as they were dehydrated and brought to Xylene. The sections were mounted in a synthetic resin (D.P.X.). Articular type cartilage stains red and growth cartilage blue.     

Nile Blue Histochemical Method for Phospholipids

The technic recommended is: Fix 6-12 hr. in 10% formalin containing 1% CaCl₂. Cut frozen sections without embedding or after gelatin or carbowax. Stain 90 min. at 60°C. in saturated aqueous Nile blue sulfate, 500 ml. plus 50 ml. of 0.5% H₂SO₄, boiled 2 hr. before use. Rinse in distilled water, and place in acetone heated to 50°C. Remove the acetone from the source of heat and allow the sections to remain 30 min. Differentiate in 5% acetic acid 30 min., rinse in distilled water, and refine the differentiation in 0.5% HCl for 3 min. Wash in several changes of distilled water and mount in glycerol jelly. Results: phospholipids - blue; everything else - unstained. Counterstaining nuclei with safranin is optional, but if done, it preferably precedes the Nile blue and is then differentiated by the acetic acid. The histochemical principles on which the method is based are as follows: (1) The calcium compounds of phospholipids combine with the oxazine form of Nile blue sulfate and survive subsequent treatment; (2) neutral lipids are dissolved out by acetone; (3) proteins and other interfering substances are destained by the acetic acid and hydrochloric acid baths.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5-2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3-5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5-30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12-16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1-2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

A Copper Sulfate-Silver Nitrate Method for Nerve Fibers of Planarians

For staining in toto, planarians are fixed in a mixture of 10 ml of commercial formalin, 45 ml of 95% ethanol and 2 ml of glacial acetic acid. After treatment with 70% ethanol 3-10 days, they are washed in distilled water and immersed in 10% CuSO₄. 5H₂O for 3 hr at 50° C, transferred without washing to 1% AgNO₃ for 1.0-1.5 hr at 50° C; and then developed in: 10 ml of 1% pyrogallol, 100 ml of 56% ethanol and 1 ml of 0.2% nitric acid. Gold toning, 5% Na₂S₂O₃ and dehydration follow as usual. For staining sections, material is fixed in the same fixative, embedded in paraffin and sectioned at 10 μ. After bringing sections to water, they are immersed in 20% CuSO₄. 5H₂O for 48 hr at 37° C; then rinsed briefly in distilled water and placed in 7% AgNO₃ for 24 hr at 37° C. They are washed briefly in distilled water and reduced in: hydroquincne, 1 gm; Na₂SO₃, 5 gm and distilled water 100 ml. Gold toning, followed by 5% Na₂S₂O₃ and dehydration completes the process. Any counterstaining may follow.     

A Single solution iron-hematoxylin Stain for Intestinal Protozoa

A single solution iron-hematoxylin stain is described for staining fecal smears rapidly and simply. The stain is prepared from the following solutions: Solution A: 1% hematoxylin in 95% alcohol, prepared by diluting a stock solution of 10% hematoxylin in 95% alcohol. Solution B: Ferric ammonium sulfate (violet crystals), 4.0 g.; glacial acetic acid, 1.0 ml.; concentrated sulfuric acid (sp. gr. 1.8),0.12 ml.; distilled water, 100 ml. Mix equal parts of Solution A and Solution B; allow to stand overnight, filter and use. For maximum length of staining life, store in full, air-tight bottles. To stain fecal smears, fix in Schaudinn's, pass through iodine alcohol to 50% alcohol, stain for three minutes, wash in running tap water 5 to 15 minutes, dehydrate and mount.     

A Single solution iron-hematoxylin Stain for Intestinal Protozoa

A single solution iron-hematoxylin stain is described for staining fecal smears rapidly and simply. The stain is prepared from the following solutions: Solution A: 1% hematoxylin in 95% alcohol, prepared by diluting a stock solution of 10% hematoxylin in 95% alcohol. Solution B: Ferric ammonium sulfate (violet crystals), 4.0 g.; glacial acetic acid, 1.0 ml.; concentrated sulfuric acid (sp. gr. 1.8),0.12 ml.; distilled water, 100 ml. Mix equal parts of Solution A and Solution B; allow to stand overnight, filter and use. For maximum length of staining life, store in full, air-tight bottles. To stain fecal smears, fix in Schaudinn's, pass through iodine alcohol to 50% alcohol, stain for three minutes, wash in running tap water 5 to 15 minutes, dehydrate and mount.     

Differentiated Staining of Osmium Tetroxide-Fixed, Vestopal-w-Embedded Tissue in thin Sections

Tissues were fixed at 20° C for 1 hr in 1% OsO₄, buffered at pH 7.4 with veronal-acetate (Palade's fixative), soaked 5 min in the same buffer without OsO₄, then dehydrated in buffer-acetone mixtures of 30, 50, 75 and 90% acetone content, and finally in anhydrous acetone. Infiltration was accomplished through Vestopal-W-acetone mixtures of 1:3, 1:1, 3:1 to undiluted Vestopal. After polymerisation at 60° C for 24 hr, 1-2 μ sections were cut, dried on slides without adhesive, and stained by any of the following methods. (1) Mayer's acid hemalum: Flood the slides with the staining solution and allow to stand at 20°C for 2-3 hr while the water of the solution evaporates; wash in distilled water, 2 min; differentiate in 1% HCl; rinse 1-2 sec in 10% NH,OH. (2) Iron-trioxyhematein (of Hansen): Apply the staining solution as in method 1; wash 3-5 min in 5% acetic acid; restain for 1-12 hr by flooding with a mixture consisting of staining solution, 2 parts, and 1 part of a 1:1 mixture of 2% acetic acid and 2% H₂SO₄ (observe under microscope for staining intensity); wash 2 min in distilled water and 1 hr in tap water. (3) Iron-hematoxylin (Heidenhain): Mordant 6 hr in 2.5% iron-alum solution; wash 1 min in distilled water; stain in 1% or 0.5% ripened hematoxylin for 3-12 br; differentiate 8 min in 2.5%, and 15 min in 1% iron-alum solution; wash 1 hr in tap water. (4) Aceto-carmine (Schneider): Stain 12-24 hr; wash 0.5-1.0 min in distilled water. (5) Picrofuchsin: Stain 24-48 hr in 1% acid fuchsin dissolved in saturated aqueous picric acid; differentiate for only 1-2 sec in 96% ethanol. (6) Modified Giemsa: Mix 640 ml of a solution of 9.08 gm KH₂PO₄ in 1000 ml of distilled water and 360 ml of a solution of 11.88 gm Na₂HPO₄-2H₂O in 1000 ml of distilled water. Soak sections in this buffer, 12 hr. Dissolve 1.0 gm of azur I in 125 ml of boiling distilled water; add 0.5 gm of methylene blue; filter and add hot distilled water until a volume of 250 ml is reached (solution “AM”). Dissolve 1.5 gm of eosin, yellowish, in 250 ml of hot distilled water; filter (solution “E”). Mix 1.5 ml of “AM” in 100 ml of buffer with 3 ml of “E” in 100 ml of buffer. Stain 12-24 hr. Differentiate 3 sec in 25 ml methyl benzoate in 75 ml dioxane; 3 sec in 35 ml methyl benzoate in 65 ml acetone; 3 sec in 30 ml acetone in 70 ml methyl benzoate; and 3 sec in 5 ml acetone in 95 ml methyl benzoate. Dehydrated sections may be covered in a neutral synthetic resin (Caedax was used).     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5–2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3–5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5–30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12–16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1–2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

A new method for easy demonstration of argyrophil cells.

A new method for silver impregnation of endocrine cells of the gastrointestinal mucosa is described. It offers great reliability, eveness of impregnation, and, since it can be used on batches of slides, is also suitable for histology class and investigation material. The procedure for paraffin sections of formalin-fixed material is as follows: dewax and transfer to distilled water, leave in 0.5% silver nitrate solution for 2 hours at 60 C. Rinse in distilled water, then treat in Bodian developer (hydroquinone, 1 g; sodium sulphite, 5 g; distilled water, 100 ml) previously heated to 60 C. Rinse in running tap water, distilled water, and then re-impregnate for 10 minutes at 60 C in the same silver solution and reduce in Bodian's solution. Since the background is not impregnated by this method, sections may be counterstained by any basic anilin dye to bring out nuclei. A 0.1% kernechtrot solution was found very satisfactory in this respect. The granulations of argyrophil cells stand out sharply black against a red background.     

A New Method for Easy Demonstration of Argyrophil Cells

A new method for silver impregnation of endocrine cells of the gastrointestinal mucosa is described. It offers great reliability, eveness of impregnation, and, since it can be used on batches of slides, is also suitable for histology class and investigation material. The procedure for paraffin sections of formalin-fixed material is as follows: dewax and transfer to distilled water, leave in 0.5% silver nitrate solution for 2 hours at 60 C. Rinse in distilled water, then treat in Bodian developer (hydroquinone, 1 g; sodium sulphite, 5 g; distilled water, 100 ml) previously heated to 60 C. Rinse in running tap water, distilled water, and then re-impregnate for 10 minutes at 60 C in the same silver solution and reduoc in Bodian's solution. Sma the background is not impregnated by this method, sections may be counterstained by any basic anilin dye to bring out nuclei. A 0.1% kernechtrot solution was found very satisfactory in this respect. The granulations of argyrophil cells stand out sharply black against a red background.     

Stains recently certified

For staining in toto, planarians are fixed in a mixture of 10 ml of commercial formalin, 45 ml of 95% ethanol and 2 ml of glacial acetic acid. After treatment with 70% ethanol 3-10 days, they are washed in distilled water and immersed in 10% CuSO₄. 5H₂O for 3 hr at 50° C, transferred without washing to 1% AgNO₃ for 1.0-1.5 hr at 50° C; and then developed in: 10 ml of 1% pyrogallol, 100 ml of 56% ethanol and 1 ml of 0.2% nitric acid. Gold toning, 5% Na₂S₂O₃ and dehydration follow as usual. For staining sections, material is fixed in the same fixative, embedded in paraffin and sectioned at 10 μ. After bringing sections to water, they are immersed in 20% CuSO₄. 5H₂O for 48 hr at 37° C; then rinsed briefly in distilled water and placed in 7% AgNO₃ for 24 hr at 37° C. They are washed briefly in distilled water and reduced in: hydroquincne, 1 gm; Na₂SO₃, 5 gm and distilled water 100 ml. Gold toning, followed by 5% Na₂S₂O₃ and dehydration completes the process. Any counterstaining may follow.     

A One-Solution Triacid General Stain Which Differentiates Oxygenated from Non-Oxygenated Red Blood Corpuscles

Tissues from representative mammals, amphibia and invertebrates were fixed for 5-24 hr in either an aqueous solution of 8% p-toluene sulfonic acid (PTSA) or in 10% formalin to which 5 gm PTSA/100 ml had been added, and processed through embedding in polyethylene glycol 400 distearate in the usual manner. Sections cut at 4-6 μ were floated on 0.2% gelatin containing 1.25% formalin, and spread and dried on slides at a temperature not exceeding 25 C. Wax was removed with xylene, and the sections brought to water through ethanol as usual. The working staining solution was made from three stock solutions: A. Chlorantine fast blue 2RLL, 0.5%; B. Cibacron turquoise blue G-E, 0.5%; C. Procion red M-P, 0.5%—each of which was dissolved in 98.5 ml of distilled water to which 0.5 ml of glacial acetic acid and 0.5 ml of propylene glycol monophenyl ether (a fungicide) had been added. For use, the three solutions were mixed in the proportions: A, 3; B, 4; and C, 3 volumes. Staining time was uncritical, 10-30 min usually sufficing for 6 μ, sections. The chief feature of the staining is the differentiation of oxygenated and nonoxygenated red blood corpuscles, in reds and blues respectively. Connective tissue stained blue or blue-green and mucin, green. Nuclei and cytoplasm stain according to their condition at the time of fixation. The mixed stain keeps well, remaining active after 2 yr of storage.     

Staining Reticulin with Gold

This bromine-iodine-gold chloride-reduction sequence stains reticulin in formalin-fixed paraffin sections without risk of sections becoming detached. After hydration, sections are exposed to 0.2% bromine water containing 0.01% KBr for 1 hr, then rinsed and placed for 5 min in a solution consisting of KI, 2 gm; iodine crystals, 1 gm; and distilled water, 100 ml. After this the sections are well washed in distilled water, immersed for 5 min in 1% w/v aqueous solution of chloro-auric acid, again rinsed in distilled water, and the gold is reduced by placing in freshly made 3% H₂O₂ for 2-4 hr at 37 C, or in 2% oxalic acid for 1-3 hr at the same temperature.     

Removal of Ribonucleic Acid from Bacterial Cells by Dilute Salt Solutions

Bacterial cells were impressed upon a clean glass slide, fixed in ethyl alcohol and immersed at 37°C in either of the following two salt solutions: (A) NaCl, 7.8 gm; KCl, 0.7 gm; distilled water, 1000 ml; adjusted to pH 7.0; or (B) 0.1M NaH₂PO₄, 400 ml; 0.1M Na₂HPO₄, 600 ml; KCl, 0.7 gm. After 1-5 hr soaking to remove ribonucleic acid, the slide was stained by Giemsa's method as usual. The staining revealed slender chromatinic bodies with reasonable clarity extending the whole diameter of the moderately swollen cell. The results of this method seemed to be much like those obtained after ribonuclease digestion.     

Silver Impregnation of Degenerating Axons in the Central Nervous System: A Modified Technic

Frozen sections of formalin-fixed brains containing surgical lesions, were treated with 15% ethanol for 0.5 hr., soaked in 0.5% phosphomolybdic acid for 0.25-1.0 hr., and subsequently treated with 0.05% potassium permanganate for 4-10 min. (The duration of the latter treatment is critical and individually variable). Subsequent procedure is as follows: decolorize in a mixture of equal parts of 1% hydroquinone and 1% oxalic acid; wash thoroughly and soak sections in 1.5% silver nitrate for 20-30 min.; ammoniacal silver nitrate (silver nitrate 0.9 g., distilled water 20 ml., pure ethanol 10 ml., strong ammonia 1.8 ml., 2.5% sodium hydroxide 1.5 ml.) 0.5-1.0 min.; reduce in acidified formalin (distilled water 400 ml., pure ethanol 45 ml., 1% citric acid 13.5 ml., 10% formalin 13.5 ml.) 1 min.; wash, and pass section through 1 % sodium thiosulf ate (0.5-1.0 min.); wash thoroughly and pass sections through graded alcohols and xylene (3 changes); cover in neutral synthetic resin.     

A silver impregnation method for nervous tissue suitable for routine use with mounted sections.

A simple, reliable silver impregnation method for nervous tissue is described for tissues fixed in various fixatives including formalin, Bouin, and Susa. Sections are impregnated in a solution containing 1 g Protargol, 2 ml of a 1% Cu(NO3)2 solution, 2 ml of a 1% AgNO3 solution, and 2-4 drops 30% H2O2 in 100 ml distilled water. Sections are impregnated 2-5 days at 37 C and thereafter reduced in a hydroquinone-formalin solution. This is followed by gold toning and subsequent reduction, dehydration and mounting. This method has been found to be very reliable and selective.