Nanostructures by self-assembling peptide amphiphile as potential selective drug carriers

The self-assembling behavior, at physiological pH, of the amphiphile peptide (C18)(2)L5CCK8 in nanostructures is reported. Stable aggregates presenting a critical micellar concentration of 2 x 10(-6) mol kg(-1), and characterized by water exposed CCK8 peptide in beta-sheet conformation, are obtained. Small angle neutron scattering experiments are indicative for a 3D structure with dimensions > or =100 nm. AFM images confirm the presence of nanostructures. Fluorescence experiments indicating the sequestration of pyrene, chosen as drug model, and the anticancer Doxorubicin within the nanostructures are reported.     

Slow release and delivery of antisense oligonucleotide drug by self-assembled peptide amphiphile nanofibers

Antisense oligonucleotides provide a promising therapeutic approach for several disorders including cancer. Chemical stability, controlled release, and intracellular delivery are crucial factors determining their efficacy. Gels composed of nanofibrous peptide network have been previously suggested as carriers for controlled delivery of drugs to improve stability and to provide controlled release, but have not been used for oligonucleotide delivery. In this work, a self-assembled peptide nanofibrous system is formed by mixing a cationic peptide amphiphile (PA) with Bcl-2 antisense oligodeoxynucleotide (ODN), G3139, through electrostatic interactions. The self-assembly of PA-ODN gel was characterized by circular dichroism, rheology, atomic force microscopy (AFM) and scanning electron microscopy (SEM). AFM and SEM images revealed establishment of the nanofibrous PA-ODN network. Due to the electrostatic interactions between PA and ODN, ODN release can be controlled by changing PA and ODN concentrations in the PA-ODN gel. Cellular delivery of the ODN by PA-ODN nanofiber complex was observed by using fluorescently labeled ODN molecule. Cells incubated with PA-ODN complex had enhanced cellular uptake compared to cells incubated with naked ODN. Furthermore, Bcl-2 mRNA amounts were lower in MCF-7 human breast cancer cells in the presence of PA-ODN complex compared to naked ODN and mismatch ODN evidenced by quantitative RT-PCR studies. These results suggest that PA molecules can control ODN release, enhance cellular uptake and present a novel efficient approach for gene therapy studies and oligonucleotide based drug delivery.     

Nuclear magnetic resonance studies of amphiphile hydration.

The nuclear magnetic resonance signal of water which remains unfrozen at ?25 °C in the presence of phosphatidylcholine has been used to determine the hydration of this amphiphile. The effects of cholesterol and sodium dodecylsulfate on both the area and linewidth of this signal indicate that these molecules cause significant changes in the structure of phosphatidylcholine vesicles in solution. Studies on other amphiphiles indicate that, whereas phosphatidylethanolamine has a hydration similar to phosphatidylcholine, species with just one hydrocarbon chain such as sodium dodecylsulfate and dodecyltrimethylammonium bromide have little, if any, hydration when assayed via the nuclear magnetic resonance experiment.     

Controlled patterning of peptide nanotubes and nanospheres using inkjet printing technology.

Peptide nanostructures are expected to serve as a major tool in future nanotechnological applications owing to their excellent self-assembly properties, biological and chemical flexibility and structural simplicity. Yet one of the limiting factors for the integration of peptide assemblies into functional electro-organic hybrid devices is the controlled patterning of their assemblies. Here we report the use of inkjet technology for the application of peptide nanostructures on nonbiological surfaces. The aromatic dipeptides nanotubes (ADNT) which readily self-assemble in solution were used as an 'ink' and patterned on transparency foil and ITO plastic surfaces using a commercial inkjet printer. While inkjet technology was used in the past for the patterning of carbon nanotubes, it was not used for the deposition of biomolecular nanostructures. Furthermore, during the development of the application we were able to produce two types of nanostructures, i.e. nanotubes and nanospheres by the self-assembly of the same aromatic dipeptide, tertbutoxycarbonyl-Phe-Phe-OH (Boc-Phe-Phe-OH), under different conditions. Both spherical and tubular structures could be efficiently patterned on surfaces into predesigned patterns. The applications of such technology are discussed.     

Biofunctionalized self-assembly of peptide amphiphile induces the differentiation of bone marrow mesenchymal stem cells into neural cells

Molecular and Cellular Biochemistry - Bone marrow mesenchymal stem cells (BMSCs) are multipotential differentiation cells which can differentiate into different cell types such as osteoblasts,...     

Controlled micelle conjugation via charged peptide amphiphiles

Abstract We report the first demonstration of nonionic detergent micelle conjugation and phase separation using purpose‐synthesized, peptide amphiphiles, C₁₀‐(Asp)₅ and C₁₀‐(Lys)₅. Clustering is achieved in two different ways. Micelles containing the negatively charged peptide amphiphile C₁₀‐(Asp)₅ are conjugated (a) via a water‐soluble, penta‐Lys mediator or (b) to micelles containing the C₁₀‐(Lys)₅ peptide amphiphile. Both routes lead to phase separation in the form of oil‐rich globules visible in the light microscope. The hydrophobic nature of these regions leads to spontaneous partitioning of hydrophobic dyes into globules that were found to be stable for weeks to months. Extension of the conjugation mechanism to micelles containing a recently discovered, light‐driven proton pump King Sejong 1‐2 (KS1‐2) demonstrates that a membrane protein may be concentrated using peptide amphiphiles while preserving its native conformation as determined by characteristic UV absorption. The potential utility of these peptide amphiphiles for biophysical and biomedical applications is discussed.     

Calcium-independent cytoskeleton disassembly induced by BAPTA.

In living organisms, Ca2+ signalling is central to cell physiology. The Ca2+ chelator 1,2-bis(2-aminophenoxy)ethane-N,N,N',N'-tetraacetic acid (BAPTA) has been widely used as a probe to test the role of calcium in a large variety of cell functions. Here we show that in most cell types BAPTA has a potent actin and microtubule depolymerizing activity and that this activity is completely independent of Ca2+ chelation. Thus, the depolymerizing effect of BAPTA is shared by a derivative (D-BAPTA) showing a dramatically reduced calcium chelating activity. Because the extraordinary depolymerizing activity of BAPTA could be due to a general depletion of cell fuel molecules such as ATP, we tested the effects of BAPTA on cellular ATP levels and on mitochondrial function. We find that BAPTA depletes ATP pools and affects mitochondrial respiration in vitro as well as mitochondrial shape and distribution in cells. However, these effects are unrelated to the Ca2+ chelating properties of BAPTA and do not account for the depolymerizing effect of BAPTA on the cell cytoskeleton. We propose that D-BAPTA should be systematically introduced in calcium signalling experiments, as controls for the known and unknown calcium independent effects of BAPTA. Additionally, the concomitant depolymerizing effect of BAPTA on both tubulin and actin assemblies is intriguing and may lead to the identification of a new control mechanism for cytoskeleton assembly.     

Controlled antibody immobilization onto immunoanalytical platforms by synthetic peptide

Antibody immobilization on a solid surface is inevitable in the preparation of immunochips/sensors. Antibody-binding proteins such as proteins A and G have been extensively employed to capture antibodies on sensor surfaces with right orientations, maintaining their full functionality. Because of their synthetic versatility and stability, in general, small molecules have more advantages than proteins. Nevertheless, no small molecule has been used for oriented and specific antibody immobilization. Here is described a novel strategy to immobilize an antibody on various sensor surfaces by using a small antibody-binding peptide. The peptide binds specifically to the Fc domain of immunoglobulin G (IgG) and, therefore, affords a properly oriented antibody surface. Surface plasmon resonance analysis indicated that a peptide linked to a gold chip surface through a hydrophilic linker efficiently captured human and rabbit IgGs. Moreover, antibodies captured by the peptide exhibited higher antigen binding capacity compared with randomly immobilized antibodies. Peptide-mediated antibody immobilization was successfully applied on the surfaces of biosensor substrates such as magnetic particles and glass slides. The antibody-binding peptide conjugate introduced in this work is the first small molecule linker that offers a highly stable and specific surface platform for antibody immobilization in immunoassays.     

Effects of calcitonin gene-related peptide on synaptic acetylcholine receptor-channels in rat muscle fibres

Cultured myotubes and freshly dissociated muscle fibres from adult rats were exposed to calcitonin gene-related peptide (CGRP) and studied by patch-clamp recording during the peptide-induced maximal accumulation of cellular cyclic AMP (cAMP). Acetylcholine receptor- (AChR-) channel properties in myotubes were not modified by the presence of CGRP (10(-7) M). The peptide, applied to the non-patched membrane, significantly increased the variance of the AChR-channel amplitude distribution at the synaptic region of muscle fibres, and three classes of AChR-channels were resolved immediately after peptide application. AChR-channels at extrasynaptic regions of fibres from denervated muscles were unaffected by CGRP. It is suggested that CGRP may regulate the synaptic AChR-channel conductance through second messenger systems.     

Partial disassembly of peroxisomes

Rat liver peroxisomes were subjected to a variety of procedures intended to partially disassemble or damage them; the effects were analyzed by recentrifugation into sucrose gradients, enzyme analyses, electron microscopy, and SDS PAGE. Freezing and thawing or mild sonication released some matrix proteins and produced apparently intact peroxisomal "ghosts" with crystalloid cores and some fuzzy fibrillar content. Vigorous sonication broke open the peroxisomes but the membranes remained associated with cores and fibrillar and amorphous matrix material. The density of both ghosts and more severely damaged peroxisomes was approximately 1.23. Pyrophosphate (pH 9) treatment solubilized the fibrillar content, yielding ghosts that were empty except for cores. Some matrix proteins such as catalase and thiolase readily leak from peroxisomes. Other proteins were identified that remain in mechanically damaged peroxisomes but are neither core nor membrane proteins because they can be released by pyrophosphate treatment. These constitute a class of poorly soluble matrix proteins that appear to correspond to the fibrillar material observed morphologically. All of the peroxisomal beta-oxidation enzymes are located in the matrix, but they vary greatly in how easily they leak out. Palmitoyl coenzyme A synthetase is in the membrane, based on its co-distribution with the 22-kilodalton integral membrane polypeptide.     

Mechanisms of actin disassembly

The actin cytoskeleton is constantly assembling and disassembling. Cells harness the energy of these turnover dynamics to drive cell motility and organize cytoplasm. Although much is known about how cells control actin polymerization, we do not understand how actin filaments depolymerize inside cells. I briefly describe how the combination of imaging actin filament dynamics in cells and using in vitro biochemistry progressively altered our views of actin depolymerization. I describe why I do not think that the prevailing model of actin filament turnover—cofilin-mediated actin filament severing—can account for actin filament disassembly detected in cells. Finally, I speculate that cells might be able to tune the mechanism of actin depolymerization to meet physiological demands and selectively control the stabilities of different actin arrays.     

Accelerating the rate of disassembly of karyopherin.cargo complexes

Transport of macromolecules across the nuclear pore complex (NPC) occurs in seconds and involves assembly of a karyopherin.cargo complex and docking to the NPC, translocation of the complex across the NPC via interaction with nucleoporins (Nups), and dissociation of the complex in the nucleoplasm. To identify rate-limiting steps in the Kap95p.Kap60p-mediated nuclear import pathway of Saccharomyces cerevisiae, we reconstituted key intermediate complexes and measured their rates of dissociation and affinities of interaction. We found that a nuclear localization signal-containing protein (NLS-cargo) dissociates slowly from Kap60p monomers and Kap60p.Kap95p heterodimers with half-lives (t(12)) of 7 and 73 min, respectively; that Kap60p and Kap60p.NLS-cargo complexes dissociate slowly from Kap95p (t(12) = 36 and 73 min, respectively); and that Kap95p.Kap60p.NLS-cargo complexes and Kap95p.Kap60p heterodimers dissociate rapidly from the nucleoporin Nup1p (t(12) < or = 21 s) and other Nups. A search for factors that accelerate disassembly of the long-lived intermediates revealed that Nup1p and Nup2p accelerate 16- and 19-fold the rate of dissociation of NLS-cargo from Kap60p.Kap95p heterodimers; that Gsp1p-GTP accelerates > or = 447-fold the rate of dissociation of Kap60p.NLS-cargo from Kap95p; and that Nup2p and the Cse1p.Gsp1p-GTP complex independently accelerate > or = 22- and > or = 39-fold the rate of dissociation of NLS-cargo from Kap60p. We suggest that Nup1p, Nup2p, Cse1p, and Gsp1p accelerate disassembly of Kap95p.Kap60p.NLS-cargo complexes by triggering allosteric mechanisms within Kaps that cause rapid release of binding partners. In that way, Nup1p, Nup2p, Cse1p, and Gsp1p may function as karyopherin release factors (or KaRFs) in the nuclear basket structure of the S. cerevisiae NPC.     

Caspar carboxylates: the structural basis of tobamovirus disassembly.

Carboxylate groups have been known for many years to drive the disassembly of simple viruses, including tobacco mosaic virus (TMV). The identities of the carboxylate groups involved and the mechanism by which they initiate disassembly have not, however, been clear. Structures have been determined at resolutions between 2.9 and 3.5 A for five tobamoviruses by fiber diffraction methods. Site-directed mutagenesis has also been used to change numerous carboxylate side chains in TMV to the corresponding amides. Comparison of the stabilities of the various mutant viruses shows that disassembly is driven by a much more complex set of carboxylate interactions than had previously been postulated. Despite the importance of the carboxylate interactions, they are not conserved during viral evolution. Instead, it appears that during evolution, patches of electrostatic interaction drift across viral subunit interfaces. The flexibility of these interactions confers a considerable advantage on the virus, enabling it to change its surface structure rapidly and thus evade host defenses.     

Polymorphism of myofibrillar proteins of rabbit skeletal-muscle fibres. An electrophoretic study of single fibres.

Rabbit predominantly fast-twitch-fibre and predominantly slow-twitch-fibre skeletal muscles of the hind limbs, the psoas, the diaphragm and the masseter muscles were fibre-typed by one-dimensional polyacrylamide-gel electrophoresis of the myofibrillar proteins of chemically skinned single fibres. Investigation of the distribution of fast-twitch-fibre and slow-twitch-fibre isoforms of myosin light chains and the type of myosin heavy chains, based on peptide ''maps'' published in Cleveland. Fischer, Kirschner & Laemmli [(1977) J. Biol. Chem. 252, 1102-1106], allowed a classification of muscle fibres into four classes, corresponding to histochemical types I, IIA, IIB and IIC. Type I fibres with a pure slow-twitch-type of myosin were found to be characterized by a unique set of isoforms of troponins I, C and T, in agreement with the immunological data of Dhoot & Perry [(1979) Nature (London) 278, 714-718], by predominance of the beta-tropomyosin subunit and by the presence of a small amount of an additional tropomyosin subunit, apparently dissimilar from fast-twitch-fibre alpha-tropomyosin subunit. The myofibrillar composition of type IIB fast-twitch white fibres was the mirror image of that found for slow-twitch fibres in that the fast-twitch-fibre isoforms only of the troponin subunits were present and the alpha-tropomyosin subunit predominated. Type IIA fast-twitch red fibres showed a troponin subunit composition identical with that of type IIB fast-twitch white fibres. On the other hand, a unique type of myosin heavy chains was found to be associated with type IIA fibres. Furthermore, the myosin light-chain composition of these fibres was invariably characterized by a small amount of LC3F light chain and by a pattern that was either a pure fast-twitch-fibre light-chain pattern or a hybrid LC1F/LC2F/LC3F/LC1Sb light-chain pattern. By these criteria type IIA fibres could be distinguished from type IIC intermediate fibres, which showed coexistence of fast-twitch-fibre and slow-twitch-fibre forms of myosin light chains and of troponin subunits.     

SNARE assembly and disassembly exhibit a pronounced hysteresis.

SNARE proteins are essential for intracellular membrane fusion of eukaryotes. Their assembly into stable four-helix bundles bridges membranes and may provide the energy for initiating membrane fusion. In vitro, assembly of soluble SNARE fragments is accompanied by major structural rearrangements that can be described as a folding reaction. The pathways and the thermodynamics of SNARE protein interactions, however, are not known. Here we report that assembly and dissociation of two distantly related SNARE complexes exhibit a marked hysteresis. The assembled and disassembled native states are separated by a kinetic barrier and cannot equilibrate on biologically relevant timescales. We suggest that the hysteresis is a hallmark of all SNARE complexes and that complex assembly and disassembly follow different pathways that may be independently controlled.     

Conformational regulation of SNARE assembly and disassembly in vivo.

SNAP receptor (SNARE) proteins function in intracellular trafficking by forming complexes that bridge vesicle and target membranes prior to fusion. Biochemical studies indicate that the entry of certain SNARE proteins into complexes is inhibited by intramolecular interactions that generate a closed conformation. For example, an essential N-terminal regulatory domain of the yeast plasma membrane SNARE Sso1p sequesters the C-terminal SNARE motif and prevents it from binding to its assembly partners Sec9p and Sncp. Here, we introduce mutations into Sso1p that cause it to remain constitutively open. These open mutants can functionally substitute for wild-type Sso1p protein in vivo, demonstrating that inhibition of SNARE assembly is not the essential function of the N-terminal regulatory domain. Furthermore, the open mutants suppress sec9--4, a mutation that causes a severe defect in SNARE assembly. Elevated levels of SNARE complexes are observed in cells expressing the open mutants. In the presence of sufficient Sec9p, these complexes accumulate to levels that cause severe growth defects. Similarly, overexpression of the open mutants in yeast carrying mutations in the SNARE disassembly machinery impairs growth. Our findings indicate that elevated levels of SNARE complexes can be toxic and that these levels are normally controlled by the SNARE disassembly machinery, by the limited availability of Sec9p, and by the closed conformation of Sso1p.     

Crystallization of bacteriorhodopsin solubilized by a tripod amphiphile

Bacteriorhodopsin (bR) is solubilized efficiently as a monomer by a novel surfactant, a tripod amphiphile (TPA), which permits the formation of purple hexagonal bR crystals under several conditions. The crystals, although small, diffract to 2.5 A resolution using synchrotron radiation. TPA may be useful for the solubilization, purification, and crystallization of other membrane proteins.     

In vitro disassembly of a parvovirus capsid and effect on capsid stability of heterologous peptide insertions in surface loops

We have analyzed the in vitro disassembly of the capsid of the minute virus of mice, and the stability of capsid chimeras carrying heterologous epitope insertions. Upon heating in a physiological buffer, empty capsids formed by 60 copies of protein VP2 underwent first a reversible conformational change with a small enthalpy change detected by fluorescence. This change was associated with, but not limited to, externalization of the VP2 N terminus. Irreversible capsid dissociation as detected by changes in fluorescence, hemagglutination activity, and electrophoretic mobility occurred at much higher temperatures. Differential scanning calorimetry in the same conditions indicated that the dissociation/denaturation transition involved a high enthalpy change and proceeded through one or more intermediates. In contrast, in the presence of 1.5 M guanidinium chloride, heat-induced disassembly fitted a two-state irreversible process. Both thermally and chemically induced dissociation/denaturation yielded a form that had lost a part of the tertiary structure, but still retained the native secondary structure. Data from chemical dissociation indicates this form may correspond to a molten globule-like monomeric state of the capsid protein. All five antigenic peptide insertions attempted in exposed loops, despite being perhaps among the least disruptive, led to defects in folding/assembly of the capsid and, in most cases, to reduced capsid stability against thermal dissociation. The results with one of the simplest viral capsids reveal a complex pathway for disassembly, and a reduction in capsid assembly and stability upon insertion of peptides, even within the most exposed capsid loops.