Decolorization of sugar syrups using commercial and sugar beet pulp based activated carbons

Sugar syrup decolorization was studied using two commercial and eight beet pulp based activated carbons. In an attempt to relate decolorizing performances to other characteristics, surface areas, pore volumes, bulk densities and ash contents of the carbons in the powdered form; pH and electrical conductivities of their suspensions and their color adsorption properties from iodine and molasses solution were determined. The color removal capabilities of all carbons were measured at 1/100 (w/w) dosage, and isotherms were determined on better samples. The two commercial activated carbons showed different decolorization efficiencies; which could be related to their physical and chemical properties. The decolorization efficiency of beet pulp carbon prepared at 750 degrees C and activated for 5h using CO2 was much better than the others and close to the better one of the commercial activated carbons used. It is evident that beet pulp is an inexpensive potential precursor for activated carbons for use in sugar refining.     

Adsorption of zein on surfaces with controlled wettability and thermal stability of adsorbed zein films

Adsorption characteristics of zein protein on hydrophobic and hydrophilic surfaces have been investigated to understand the orientation changes associated with the protein structure on a surface. The protein is adsorbed by a self-assembly procedure on a monolayer-modified gold surface. It is observed that zein shows higher affinity toward hydrophilic than hydrophobic surfaces on the basis of the initial adsorption rate followed by quartz crystal microbalance studies. Reflection absorption infrared (RAIR) spectroscopic studies reveal the orientation changes associated with the adsorbed zein films. Upon adsorption, the protein is found to be denatured and the transformation of alpha-helix to beta-sheet form is inferred. This transformation is pronounced when the protein is adsorbed on hydrophobic surfaces as compared to hydrophilic surfaces. Electrochemical techniques (cyclic voltammetry and impedance techniques) are very useful in assessing the permeability of zein film. It is observed that the zein moieties adsorbed on hydrophilic surfaces are highly impermeable in nature and act as a barrier for small molecules. The topographical features of the deposits before and after adsorption are analyzed by atomic force microscopy. The protein adsorbed on hydrophilic surface shows rod- and disclike features that are likely to be the base units for the growth of cylindrical structures of zein. The thermal stability of the adsorbed zein film has been followed by variable-temperature RAIR measurements.     

Comparison of optimised isotherm models for basic dye adsorption by kudzu

This study assesses the use of dried (5% w/w moisture) kudzu (Peuraria lobata ohwi) as an adsorbent medium for the removal of two basic dyes, Basic Yellow 21 and Basic Red 22, from aqueous solutions. The extent of adsorption was measured through equilibrium sorption isotherms for the single component systems. Equilibrium was achieved after 21 days. The experimental isotherm data were analysed using Langmuir, Freundlich, Redlich-Peterson, Temkin and Toth isotherm equations. A detailed error analysis was undertaken to investigate the effect of using different error criteria for the determination of the single component isotherm parameters. The performance of the kudzu was compared with an activated carbon (Chemviron F-400). Kudzu was found to be an effective adsorbent for basic dye colour removal; though its capacity for colour removal was not as high as an activated carbon, the potential appeared to exist to use it as an alternative to activated carbon where carbon cost was prohibitive.     

Dipalmitoylphosphatidylcholine and cholesterol in monolayers spread from adsorbed films of pulmonary surfactant

Pulmonary surfactant forms a surface film that consists of a monolayer and a monolayer-associated reservoir. The extent to which surfactant components including the main component, dipalmitoylphosphatidylcholine (DPPC), are adsorbed into the monolayer, and how surfactant protein SP-A affects their adsorptions, is not clear. Transport of cholesterol to the surface region from dispersions of bovine lipid extract surfactant [BLES(chol)] with or without SP-A at 37 degrees C was studied by measuring surface radioactivities of [4-(14)C]cholesterol-labeled BLES(chol), and the Wilhelmy plate technique was used to monitor adsorption of monolayers. Results showed that transport of cholesterol was lipid concentration dependent. SP-A accelerated lipid adsorption but suppressed the final level of cholesterol in the surface. Surfactant adsorbed from a dispersion with or without SP-A was transferred via a wet filter paper to a clean surface, where the surface radioactivity and surface tension were recorded simultaneously. It was observed that 1) surface radioactivity was constant over a range of dispersion concentrations; 2) cholesterol and DPPC were transferred simultaneously; and 3) SP-A limited transfer of cholesterol.These results indicate that non-DPPC components of pulmonary surfactant can be adsorbed into the monolayer. Studies in the transfer of [1-(14)C]DPPC-labeled BLES(chol) to an equal or larger clean surface area revealed that SP-A did not increase selective adsorption of DPPC into the monolayer. Evaluation of transferred surfactant with a surface balance indicated that it equilibrated as a monolayer. Furthermore, examination of transferred surfactants from dispersions with and without prespread BLES(chol) monolayers revealed a functional contiguous association between adsorbed monolayers and reservoirs.     

Selective removal of molybdenum traces from growth media of N2-fixing bacteria

A new method for the selective removal of traces of molybdenum from growth media of N2-fixing bacteria (Rhodobacter capsulatus and Klebsiella pneumoniae) was developed. This method is based on the filtration of nutrient solutions through a layer of activated carbon (pulverized charcoal). The adsorption of Mo (molybdate) to activated carbon was optimal if a charcoal suspension (50 g/liter) was degassed by boiling before use and if the pH of the solutions, which had to be purified, was adjusted to values between 1.5 and 4. In this pH region no or only negligible amounts of other metal ions were adsorbed. The activated carbon method was compared with other Mo-eliminating procedures, including 8-hydroxyquinoline/dichloromethane extraction, Chelex 100 chromatography, and treatment with Mo-starved Azotobacter vinelandii cells. The activated carbon filtration appeared to be the most effective, specific, and rapid method. Whereas the untreated Rhodobacter growth medium was contaminated with 1.2 ppb Mo, as analyzed by inductively coupled plasma mass spectrometry (ICP-MS), the activated carbon-treated medium was below the ICP-MS detection limit (less than 0.05 ppb). A similarly effective removal of Mo impurities was obtained by the Azotobacter treatment. Even at low optical densities (2-5 at 436 nm) Mo traces were removed very rapidly within 10-15 min. However, because the Mo uptake/Mo adsorption capacity of A. vinelandii depended on freshly cultivated cells and on the growth phase at which the cells were harvested, this microbiological method was generally more time-consuming and less reproducible than the activated carbon method.(ABSTRACT TRUNCATED AT 250 WORDS)     

Physicochemical factors affecting ethanol adsorption by activated carbon

Powder and granular activated charcoal were evaluated for ethanol adsorptivity from aqueous mixtures using an adsorption isotherm. Ethanol adsorption capacity was more pronounced at 25 degrees C as compared to 5, 15, and 40 degrees C. When pH of the ethanol-buffer mixture (0.09 ionic strength) was changed from acidic (2.3) to neutral and then to alkaline (11.2), ethanol adsorption was decreased. Increasing ionic strength of the ethanol-buffer mixtures from 0.05 to 0.09 enhanced ethanol adsorption but a further increase to 0.14 showed no significant effect. Ethanol adsorption was more efficient from an aqueous ethanol mixture as compared to semidefined and nondefined fermentation worts, respectively. Heating granular charcoal to 400 degrees C for 1 h and 600 degrees C for 3 h in N(2) increased ethanol adsorptivity and heating to 1000 degrees C (1 h) in CO(2) decreased it when ethanol was removed from dilute solutions by simple pass adsorption in a carbon packed column. Granular charcoal was superior to powdered charcoal and an inverse relationship was noted between the weight of the granular carbon bed in the column and ethanol adsorbed/g carbon. Decreasing the column feed flow rate from 7.5 to 2.0 L aqueous ethanol/min increased the adsorption rate.     

Preparation and characterization of activated carbon derived from the thermo-chemical conversion of chicken manure

Physico-chemical properties of a bioorganic char were modified by pyrolysis in the presence of NaOH, and with subsequent physical activation of carbonaceous species with CO2 a value-added activated carbon was fabricated. Bioorganic char is produced as a co-product during the production of bio-fuel from the pyrolysis of chicken litter. Untreated char contains approximately 37 wt% of C and approximately 43-45 wt% of inorganic minerals containing K, Ca, Fe, P, Cu, Mg, and Si. Carbonization and chemical activation of the char at 600 degrees C in the presence of NaOH in forming gas (4% H2 balanced with Ar) produced mainly demineralized activated carbon having BET (Brunauer, Emmett, and Teller) surface area of 486 m2/g and average pore size of 2.8 nm. Further physical activation with CO2 at 800 degrees C for 30 min resulted in activated carbon with BET surface area of 788 m2/g and average pore size of 2.2 nm. The mineral content was 10 wt%. X-ray photoelectron spectroscopy (XPS) indicated that the latter activation process reduced the pyrrolic- and/or pyridonic-N, increased pyridinic-N and formed quaternary-N at the expense of pyrrolic- and/or pyridonic-N found in the untreated char.     

Thermal properties of corn gluten meal and its proteic components

Thermal properties of corn gluten meal (CGM) and of its extracted proteic components (zein and glutelin) at 0% moisture content, is studied by dynamic mechanical thermal analysis (DMTA) and modulated differential scanning calorimetry (MDSC). The glass transition temperature (T_g) on first heating, is measured at 176 and 174°C, respectively, for hot-air-dried and native CGM. For zein and glutelin isolated fractions, the measured T_g values are 164 and 209°C, respectively. The calculated T_g from using Matveev’s method (Matveev YI. Spec Publ R Soc Chem 1995;156;552) is in good agreement with experimental data for zein, a well defined protein. MDSC allows the measurement of change in heat capacity at T_g (ΔCp) with a single heating scan, avoiding sample alteration, and ΔCp values are 0.365 J/g per K for zein and 0.184 J/g per K for glutelin. The differences observed in T_g, relaxation temperatures, ΔCp and tan δ peak height are related to differences in the structure of the proteins, through the cross-linkages and hydrogen or van der Waals interactions. Experimental data from DMTA and MDSC, and the Couchman–Karasz thermodynamic approach indicate that CGM behaves as a miscible blend of its components, with high non-polar interactions between zein and glutelin proteins.     

Formation of Advanced Glycation Endproducts from Low Molecular Weight Model Compounds

The process of glycation was studied in 12 model systems containing carbohydrates (Glc, Fru) and peptides (Gly-Gly, Gly-Phe, Phe-Gly, Gly-Lys) or acetylated amino acids (Ac-Lys, Ac-Arg) in order to clarify the role of different structural elements of the reacting components. The course of reaction was followed by the changes of the UV spectra of the reaction systems. The results show that the reactivity of the NH₂ group correlates with its pK_a value. The presence of benzene ring in the amino component accelerates glycation. Strong correlation between the intensity of the fluorescence and the absorption at 325 nm was found for all reaction systems.     

Cell-Membrane Inspired Multifunctional Nanocoating for Rescuing the Active-Material Microenvironment in High-Capacity Sulfur Cathode

Achieving healthy active-material microenvironment (ME@AM) for stable and efficient electron/ion transport around each active-material particle is crucial for high-performance battery electrodes. However, this goal has been proved extremely challenging for most high-capacity AMs such as sulfur, owing to its notable volume change and severe shuttle effect. Here, a multifunctional hybrid material with zein protein reinforced catalytic single Cu atom/carbon composite (Cu─C) (zein/Cu─C) is coated onto sulfur/carbon (SC) particle, to prepare the advanced zein/Cu─C@SC core–shell particle. Similar to the multifunctional cell membrane well-known in biology, this multifunctional zein/Cu─C coating helps build a healthy and stable ME@AM within sulfur cathode. Specifically, it can simultaneously provide robust protective shell for the AM particle, adsorption and catalyst function to the dissolved polysulfides, and AM surface treatment to improve AM/conductive agent interface. All these functions are the keys to build and maintain a healthy ME@AM in sulfur cathode. This study not only brings effective solutions to the challenges in volume-change high-capacity sulfur active materials and beyond, but also helps achieve comprehensive understanding of the key factors controlling the structuring and final quality of ME@AM.     

Transformation and phosphorylation of purified molybdate-stabilized chicken oviduct progesterone receptor

The non-transformed, molybdate-stabilized chick oviduct cytosol progesterone receptor was purified approx. 7000-fold using biospecific affinity resin (NADAC-Sepharose), DEAE-Sephacel chromatography and gel filtration on Bio-Gel A-0.5m agarose. The purified preparation contained progesterone receptor which sedimented as a 7.9S molecule, had a Stokes' radius of 7.5 nm, was composed of three major peptides corresponding to Mr 108,000, 90,000 and 79,000. Upon removal of molybdate, the purified [3H]progesterone-receptor complex could be transformed from the 8S form to a 4S form by exposure to 23 degrees C or by an incubation with 10 mM ATP at 0 degrees C. The purified thermally transformed receptor could be adsorbed to columns of ATP-Sepharose. No cytosol factor(s) appeared to be required for the 8S to 4S transformation of purified receptor or for its subsequent binding to ATP-Sepharose. Incubation of purified non-transformed receptor preparation with [gamma-32P]ATP and cAMP-dependent protein kinase led to incorporation of radioactivity in all the three major peptides at serine residues. The results of this study show for the first time that purified 8S progesterone receptor can be phosphorylated in vitro by a cAMP-dependent protein kinase, and that it can be transformed to a 4S form by 0 degrees C incubation with 10 mM ATP.     

Study of soluble lipoprotein in rat liver mitochondria

1. A water-soluble lipoprotein was isolated and purified from osmotically shocked preparations of rat liver mitochondria by using a technique of Sephadex-sandwich disc electrophoresis. 2. The purified lipoprotein migrates as a distinct sharp zone in high-resolution electrophoretic systems, indicating high degree of purity. 3. The lipoprotein resembles mitochondrial membranes with respect to lipid composition and lipid/protein ratio. 4. The lipoprotein and its apoprotein fraction obtained by delipidization at -18 degrees C to -20 degrees C have common properties with respect to their fluorescence spectra, instability to storage and electrophoretic mobility. 5. The purified lipoprotein has an excitation maximum at 325nm and a fluorescence maximum at 418nm. 6. Storage at 4 degrees C for 4 days or repeated freezing and thawing results in 15-30% decrease in electrophoretic mobility. 7. The patterns of incorporation in vitro of [1-(14)C]leucine into proteins of the soluble lipoprotein and of mitochondrial membrane of isolated rat liver mitochondria suggest a probable precursor role for the apoprotein in the formation of mitochondrial membrane protein. 8. Lipoprotein preparations isolated from mitochondrial fractions of rat kidney, brain and heart and of chicken and mouse liver resemble closely that obtained from rat liver mitochondria, suggesting that the soluble lipoprotein could be a distinct entity of mitochondrial origin.     

Reversibility and competition in the adsorption of Trichoderma reesei cellulase components

Adsorption reversibility and competition between fractionated components of the Trichoderma reesei cellulase system were studied. Specific endoglucanase (EGI), nonspecific endoglucanases (EGII, EGIII), and cellobio-hydrolase (CBHI) were previously grouped according to their hydrolytic function. At 5 degrees C, direct evidence of exchange between adsorbed and free enzyme was obtained for each component using [(3)H] and [(14)C] radiolabeled tracers. No release of bound enzymes was detected upon dilution of the free enzyme solution. In simultaneous adsorption of enzyme pairs, CBHI was shown to predominate adsorption. Endoglucanase EGI was preferentially adsorbed over EGII and EGIII. Sequential adsorption studies have shown that interaction between enzyme components largely determines the degree of their adsorption. Evidence suggests that both common and distinct adsorption sites exist and that their occupation depends on which components are involved. Predominance in adsorption by any one of the enzyme components is decreased at 50 degrees C. Light microscopy and monitoring of sugar production during cellulose hydrolysis provided evidence that reduction in the ionic strength decreases the adsorption predominance of CBHI and enhances the synergism between the cellulase components.     

Removal of color from biomethanated distillery spentwash by treatment with activated carbons

This work examined 19 carbon samples prepared by acid and thermal activation of various agro-residues viz. bagasse, bagasse flyash, sawdust, wood ash and rice husk ash for color removal from biomethanated distillery effluent. Phosphoric acid carbonized bagasse B (PH) showed the maximum color removal (50%). However, commercial activated carbons AC (ME) and AC (LB) showed better performance of over 80% color removal. Besides color removal, activated carbon treatment also showed reduction in chemical oxygen demand (COD), total organic carbon (TOC), phenol and total Kjeldahl nitrogen (TKN). The performance was related to the characteristics of the investigated samples. Further, adsorption isotherms for melanoidins, which is the primary coloring compound in distillery spentwash, followed the Langmuir isotherm implying monolayer adsorption.     

Characterization of the menaquinone-dependent disulfide bond formation pathway of Escherichia coli

In the protein disulfide-introducing system of Escherichia coli, plasma membrane-integrated DsbB oxidizes periplasmic DsbA, the primary disulfide donor. Whereas the DsbA-DsbB system utilizes the oxidizing power of ubiquinone (UQ) under aerobic conditions, menaquinone (MK) is believed to function as an immediate electron acceptor under anaerobic conditions. Here, we characterized MK reactivities with DsbB. In the absence of UQ, DsbB was complexed with MK8 in the cell. In vitro studies showed that, by binding to DsbB in a manner competitive with UQ, MK specifically oxidized Cys41 and Cys44 of DsbB and activated its catalytic function to oxidize reduced DsbA. In contrast, menadione used in earlier studies proved to be a more nonspecific oxidant of DsbB. During catalysis, MK8 underwent a spectroscopic transition to develop a visible violet color (lambdamax = 550 nm), which required a reduced state of Cys44 as shown previously for UQ color development (lambdamax = 500 nm) on DsbB. In an in vitro reaction system of MK8-dependent oxidation of DsbA at 30 degrees C, two reaction components were observed, one completing within minutes and the other taking >1 h. Both of these reaction modes were accompanied by the transition state of MK, for which the slower reaction proceeded through the disulfide-linked DsbA-DsbB(MK) intermediate. The MK-dependent pathway provides opportunities to further dissect the quinone-dependent DsbA-DsbB redox reactions.     

以纸为碳源去除地下水硝酸盐的研究

研究了以纸为碳源和反应介质的生物反应器对水中硝酸盐的去除。结果表明,以纸为碳源的反应器启动快．反硝化反应受温度及水力停留时间影响大。25℃的反硝化速率是14℃的1．7倍。在室温25±1℃,进水硝酸盐氮浓度为45．2mg·L^-1、水力停留时间8．6h时,反应器对硝酸盐氮的去除率在99．6％以上,当水力停留时间为7．2h,氮去除率只有50％。反硝化反应受pH值和溶解氧的影响小,反应进行过程中,纸表面形成了生物膜,纸也被消耗了．采用反应器出水再经活性炭吸附的工艺流程处理高硝酸盐氮地下水,<33．9mg·L^-1的硝酸盐氮完全去除,没有出现NC2-N,最终出水水质DOC<11mg·L^-1。     

Analysis of Medication Off-odors Using an Electronic Nose

Packaging materials have been implicated as a source for off-odorsin pharmaceutical products. A new instrumentation method employingan array of conducting polymer gas sensors was used to identifythe offending packaging components in the canister of a pharmaceuticalinhalant. A case study is described in which tainted inhalersas well as elastomeric components of the canisters were ‘sniffed’by the electronic nose. The electronic nose was able to differentiatebetween tainted and untainted canisters. Signal processing algorithmsperformed on the raw data from the sensors suggested that specificelastomeric components were responsible for the off-odor. Afurther experiment suggested that the propellant (Freon) extractedthe odor from the elastomeric components as the medication wasexpelled from the canister. These data indicate that the electronicnose is a potential tool to solve odor problems in which humanodor assessment is not feasible due to excess exposure to themedically active ingredient. Chem. Senses 22: 119–128,1997.     

Growth-promoting Activity of an Aqueous Extract of Soybean Seeds for Some Microorganisms

The metabolic fates of the carbon skeletons of leucine, lysine, and threonine were studied in growing rats on the diets containing graded levels of protein calorie percentages (10, 20, 30, and 40PC%) by use of either gluten or zein at 4100 kcal of metabolizable energy per kg of diets. In growth experiment for 21 days, body weight gain, food intake, and body fat increased at higher PC% in the gluten diets, but rats given zein did not maintain their initial weight even at 40PC%. The concentration of plasma free lysine remained low with the zein diets, but plasma threonine increased at 10 and 20PC% in the gluten and zein diets, respectively. Plasma leucine increased as the protein level increased either dietary protein. More than 70% of ¹⁴C was incorporated into body protein 12 h after an intraperitoneal injection of labeled lysine in all groups, but little ¹⁴CO₂ was expired in rats on the gluten and zein diets. About 79% of ¹⁴C-threonine was incorporated into body protein in rats given the gluten and zein diets at 10PC%, but the values were gradually decreased with increasing the dietary protein levels. Some 40–50% of ¹⁴C-leucine was incorporated into the body protein in rats given the gluten diets, and the values for the zein diets were extensively decreased in the higher PC% groups where the expired ¹⁴CO₂ was inversely increased to a great extent. These results showed that, when a specific amino acid was limiting or deficient in the diet, the major portion of the labeled amino acid was utilized for body protein synthesis and little was oxidized to carbon dioxide, whereas the oxidative degradation of essential amino acid other than limiting one was increased and the efficiency of the amino acid utilization was relatively decreased.