Identification of lipopolysaccharide binding site on high molecular weight kininogen

Plasma kallikrein kinin system (KKS) activation along with its cellular receptors expression are increased after injury and in patients with septic shock, hypotensive bacteremia and rhesus monkey infected with Salmonella typhimurium. KKS signaling cascade is activated by activated factor XII (FXIIa, Hageman factor)- and prolylcarboxypeptidase (PRCP)-dependent pathways on endothelial cells. Among the many entities that comprise the KKS, high molecular weight kininogen (HK), a bradykinin precursor, is critical in the assembly and activation of this system. HK is primarily expressed in the liver and secreted into the bloodstream. The activation of the KKS influences the permeability of the endothelium by liberating bradykinin (BK) from HK. BK is a potent inflammatory peptide which stimulates constitutive bradykinin B2 and inducible B1 receptors to release nitric oxide and prostacyclin. Regardless of the triggers, PK can only be activated on HK bound to the artificial negatively charged or to cell membrane surfaces. Since LPS has a negatively charged moiety and the ability to induce inflammatory responses in human, we determined the interaction between LPS and HK. HKH19 (HK cell binding site) and heparin inhibited LPS binding to HK with IC₅₀s of 15 nM and 20 μg/ml, respectively. C1-inhibitor and N-acetylglucosamine glycan inhibited LPS binding to HK with IC₅₀s of about 10 μg/ml and 10 mM, respectively. This novel study underscores the implication of HK in infection. We propose that HKH19, heparin, and C1-inhibitor present therapeutic potential for the treatment of sepsis and hypotensive bacteremia.     

Solution phase conformation studies of the prekallikrein binding domain of high molecular weight kininogen

High molecular weight kininogen is a cofactor of the surface-dependent phase of the blood-clotting cascade. Unique sequence-binding sites are exposed on the surface of this glycoprotein which complex prekallikrein or factor XI with high affinity and specificity (Tait and Fujikawa, 1987). A sequence comprising 31-residues (residues 565–595 of the mature kininogen molecule) retains full binding activity for prekallikrein but the sequence 569–595 (27 residues) shows only 25% of this binding affinity (Vogelet al., 1990). Thus, the key structural features required for protein recognition reside in the 31-residue sequence but these features are likely compromised (or absent) in the 27-residue sequence. To determine the conformation of the prekallikrein-binding domain, peptides comprising the 31- and 27-residue sequences were prepared by solid-phase methods and their structures determined by circular dichroism, fluorescence polarization, and 2D-NMR techniques. Fluorescence emission spectra, polarization, and anisotropy measurements of the single Trp residue present in both peptides show that the 31-residue peptide contains an ordered microenvironment at its amino terminus, which is not present in the 27-residue peptide. This structural ordering is characterized by movement of the Trp residue into a more polar environment. Further, the 31-residue peptide possesses a higher limit anisotropy, longer rotational relaxation time, and shows a higher polarization value even at elevated temperatures. Circular dichroic spectra of both peptides in the far UV region are essentially identical and indicate that both peptides contain predominantly -turn elements, but also contain some -helix, -sheet, and random coil character. The structural elements of both peptides are unchanged in urea solution, but the negative ellipticity absorption band in the near UV region assignable to Trp is eliminated in acid solution upon protonation of the neighboring -Asp-Asp-Asp- triplet. In the two peptides, the spin system of each amino acid has been assigned through 2D-¹H scalar coupling correlated experiments; pure absorption NOESY experiments were used to determine through-space connectivities. The results are entirely consistent with the previous experiments in that both peptides contain predominantly -turn elements and the amino terminus of the 31-residue peptide is highly ordered in comparison with the 27-mer; in fact, this region is likely to be helical in nature. In addition to the turn and sheet elements, the 31-mer shows long-range connectivities which are not present in the 27-mer. Hence, the 31-mer likely folds in solution forming a unique domain. By inference, the N-terminal segment of the 31-residue peptide contributes in large part to its fourfold increase in affinity for prekallikrein.     

Studies on porcine high molecular weight kininogen. An improved method for the purification of porcine high molecular weight kininogen and cleavage of the kininogen by the action of porcine plasma kallikrein

By introduction of stepwise DEAE Sephadex A-50 and copper-Chelating Sepharose 6B column chromatographies, about 18.5 mg of high molecular weight kininogen (HK) composed of a single polypeptide chain was obtained from 500 ml of porcine plasma. Molecular weights of reduced or non-reduced preparation were estimated to be 110 kDa and 116 kDa, respectively, by SDS–PAGE. Using the preparation, cleavage of HK by porcine plasma kallikrein (KK) was investigated. A single polypeptide HK was cleaved into two chains cross-linked by disulfide bond(s), accompanying the release of kinin. Further degradation was not observed. Molecular weights of heavy-chain (H-chain) and light-chain (L-chain) were estimated to be 61 kDa and 56 kDa, respectively, by SDS–PAGE. The amino- (N-) terminal sequences of intact HK, reduced and carboxymethylated- (RCM-) H-chain, RCM-L-chain and the peptide around the kinin moiety obtained by BrCN digestion were determined. Their sequences were highly homologous with those of bovine or human HK. These results indicate that plasma KK first cleaved the Arg-Ser bond of HK, and formed nicked HK. The second cleavage yielded bradykinin (BK) and kinin-free protein, which was apparently of equal size to the nicked HK. The structure of HK was from the N-terminus to the carboxy- (C-) terminus, H-chain-BK-L-chain.     

Calorimetric and spectroscopic examination of the solution phase structures of prekallikrein binding domain peptides of high molecular weight kininogen

Unique sequence-binding sites are exposed on the surface of high molecular weight kininogen which complex prekallikrein or factor XI with high affinity and specificity. A sequence comprising 31 residues of the mature kininogen molecule (Asp565-Lys595) retains full binding activity for prekallikrein (K _D =20 nM) and assumes a complex folded structure in solution which is stabilized by long-range interactions between N- and C-terminal residues. The sequence Trp569-Lys595 (27 residues) shows only 28% of this binding affinity and lacks the key structural features required for protein recognition (Scarsale, J. N., and Harris, R. B.,J. Prot. Chem. 9, 647–659, 1990). We were thus able to predict that N- or C-terminal truncations of the binding-site sequence would disrupt the conformational integrity required for binding. Two new peptides of 20- and 22- residues have now been synthesized and their solution phase structures examined. These peptides are N- and C-terminal truncations, respectively, of the 27-residue sequence and correspond to the sequences Asp576-Lys595 and Trp569-Asp590 of high molecular weight kininogen. The results of fluorescence emission and circular dichroism (CD) spectroscopies in the range 25–90°C and from differential scanning calorimetry (DSC) all substantiate the idea that the C-terminal truncation peptide binds prekallikrein 35-fold poorer than the 31-residue peptide because it is relatively unoredered and possesses a less stable structure. Surprisingly, the N-terminal truncation peptide (20-mer) shows structural stability even at elevated temperatures and, like the 31-residue peptide, undergoes cold-induced denaturation observable in the DSC. 2D-NMR analysis of the 20-residue peptide revealed two distinct structures; one conformer possesses a more compact, folded structure than the other. However, the predicted structures assumed by either conformer are very different from those of either the 31- or 27-residue peptides. Hence, the binding affinity of the 20-residue peptide is 60-fold poorer than that for the 31-residue peptide because it assumes a nonproductive binding conformation(s).     

Isolation of a large glycopeptide from cartilage procollagen by collagenase digestion and evidence indicating the presence of glucose, galactose and mannose in the peptide.

Digestion of cartilage procollagen, pro-α1(II), with bacterial collagenase followed by fractionation of Sephadex G-150 yielded a large glycopeptide (molecular weight 13,200) which could not be demonstrated in a similarly prepared digest of α1(II) chain. Isotopic studies suggested that this glycopeptide contained, in addition to glucose and galactose, mannose, a sugar that is not found in the authentic α-chain of cartilage. The results imply that in pro-α1(II) there is a glycopeptide region differing from the α1(II) chain in amino acid composition and also in the type of carbohydrates attached.     

Studies on human high molecular weight (HMW) kininogen. II. Structural change of HMW kininogen by the action of human plasma kallikrein

We have investigated in detail the cleavage of human high molecular weight (HMW) kininogen by human plasma kallikrein and revealed the formation of a nicked kininogen and a novel kinin-free protein (KFP) as intermediate cleavage products. The cleavage of a single chain HMW kininogen (Mr=120,000) by plasma kallikrein was a three-step reaction. The first cleavage yielded a nicked kininogen composed of two disulfide-linked 62,000 and 56,000 daltons chains. The second cleavage yielded kinin and an intermediate kinin-free protein, KFP-I, which was apparently of equal size to the nicked kininogen. The third cleavage yielded a stable kinin-free protein, KFP-II, composed of two disulfide-linked 62,000 and 45,000 daltons chains. The liberation of an 8,000 daltons fragment was identified when the 56,000 daltons chain isolated by SP-Sephadex C-50 chromatography of reduced and alkylated KFP-I was cleaved by plasma kallikrein into the 45,000 daltons chain. Although the antiserum against HMW kininogen cross-reacted with low molecular weight (LMW) kininogen, the antiserum against the 45,000 daltons chain was specific for HMW kininogen. These results suggest that the antigenic determinant groups common to HMW and LMW kininogens are located in the 62,000 daltons heavy chain, while those specific for HMW kininogen are located in the 45,000 daltons light chain, which is known to retain blood coagulation activity.     

Primary structure requirements for the binding of human high molecular weight kininogen to plasma prekallikrein and factor XI

We recently identified residues 185-224 of the light chain of human high molecular weight kininogen (HMWK) as the binding site for plasma prekallikrein (Tait, J.F., and Fujikawa, K. (1986) J. Biol. Chem. 261, 15396-15401). In the present study, we have further defined the primary structure requirements for binding of HMWK to factor XI and prekallikrein. In a competitive fluorescence polarization binding assay, a 31-residue synthetic peptide (residues 194-224 of the HMWK light chain) bound to prekallikrein with a Kd of 20 +/- 6 nM, indistinguishable from the previously determined value of 18 +/- 5 nM for the light chain. We also prepared three shorter synthetic peptides corresponding to different portions of the 31-residue peptide (residues 205-224, 212-224, and 194-211), but these peptides bound to prekallikrein more than 100-fold more weakly. Factor XI also bound to the same region of the HMWK light chain, but at least 58 residues (185-242) were required for optimal binding (Kd = 69 +/- 4 nM for the light chain; Kd = 130 +/- 50 nM for residues 185-242). The four synthetic peptides inhibited kaolin-activated clotting of blood plasma with potencies paralleling their affinities for prekallikrein and factor XI. Peptide 194-224 can also be used for rapid affinity purification of prekallikrein and factor XI from plasma.     

Two-dimensional peptide mapping of fibronectins from bovine aortic endothelial cells and bovine plasma

We have made a comparison between plasma and endothelial cell fibronectin, since these cells are in intimate contact with plasma $\text{in vivo}$. Cellular and secreted fibronectins were purified from cloned lines of adult bovine aortic endothelial cells, and compared to purified bovine plasma fibronectin by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and two-dimensional peptide mapping. When unreduced, all three fibronectins migrated on gels as single bands with M_r 440,000. After reduction, cellular and secreted fibronectins migrated on gels as single bands with M_r 220,000, but plasma fibronectin migrated as two bands with M_r 220,000 and 210,000. All three fibronectins, including the two subunits of plasma fibronectin, had identical structures by peptide mapping analysis.     

Selective purification and characterization of adiponectin multimer species from human plasma

Adiponectin is an adipocyte-derived hormone and known to form several species of multimer, however, the precise components of each multimer have not been fully determined. We purified each multimer adiponectin selectively from human plasma and characterized them by affinity columns using anti-adiponectin, gelatin, or anti-albumin antibody and gel filtration. We found that adiponectin exists as four species of multimers in human plasma. According to their migrating mobility and N-terminal amino acid analysis, we defined them as a trimer, albumin-binding trimer, hexamer, and HMW. Low pH shifted HMW to hexamer, raising the possibility that HMW is a 12 mer or larger multimer. We also showed that HMW had the highest binding activity to the membrane fractions of C2C12 myocytes and activated AMPK most potently. Our results indicate that adiponectin forms diverse multimer species and at least some of the functional properties are dependent on a multimer status.     

The sequence HGLGHGHEQQHGLGHGH in the light chain of high molecular weight kininogen serves as a primary structural feature for zinc-dependent binding to an anionic surface.

The histidine-glycine-rich region of the light chain of cleaved high molecular weight kininogen (HK) is thought to be responsible for binding to negatively charged surfaces and initiation of the intrinsic coagulation, fibrinolytic, and kinin-forming systems. However, the specifically required amino acid sequences have not been delineated. An IgG fraction of a monoclonal antibody (MAb) C11C1 to the HK light chain was shown to inhibit by 66% the coagulant activity and by 57% the binding of HK to the anionic surface of kaolin at a concentration of 1.5 microM and 27 microM, respectively. Proteolytic fragments of HK were produced by successive digestion with human plasma kallikrein and factor XIa (FXIa). Those polypeptides that bound tightly (Kd = 0.77 nM) to a C11C1 affinity column were eluted at pH 3.0 and purified by membrane filtration. On 15% SDS polyacrylamide electrophoresis, the approximate M(r) was 7.3 kDa (range 6.2-8.1 kDa). Based on N-terminal sequencing, this polypeptide (1(2)), which extends from the histidine residue 459 to a lysine at position 505, 509, 511, 512, 515, or 520, inhibits by 50% the coagulant activity expressed by HK at a concentration of 22 microM. The synthetic peptide HGLGHGH representing the N-terminal of the 1(2)) fragment was synthesized, tested, and found at 4 mM to inhibit the procoagulant activity of HK 50%. A synthetic heptadecapeptide, HGLGHGHEQQHGLGHGH (residues 459-475) included within the 1(2) fragment, and with the ability to bind zinc, inhibited 50% of the HK coagulant activity at a concentration of 325 microM in the absence and presence of added Zn2+ (30 microM). The specific binding of 125I-HK to a negatively charged surface (kaolin) was inhibited 50% by unlabeled HK (5 microM). HGLGHGH, at a concentration of 7.0 mM, inhibited the binding to kaolin by 50%. The heptadecapeptide inhibited the specific binding of 125I-HK to kaolin by 50%, at a concentration of 2.3 mM, in the absence of Zn2+. In contrast, when Zn2+ was added, the concentration to achieve 50% inhibition decreased to 630 microM, indicating that Zn2+ was required to attain a favorable conformation for binding. Moreover, the 1(2) fragment was found to inhibit 50% of the 125I-HK binding to kaolin at a concentration of 380 microM. These results suggest that residues contained within the 1(2) fragment, notably HGLGHGHEQQHGLGHGH, serves as a primary structural feature for binding to a negatively charged surface.     

带芒草属物种新型高分子量谷蛋白亚基的鉴定

采用SDSPAGE方法对牧草带芒草属3个种8份材料的高分子量谷蛋白进行了检测和鉴定。结果显示,带芒草物种具有的高分子量谷蛋白亚基与普通小麦中发现的不一样,其迁移率存在较大差异。其中,x型亚基均比Dx2亚基迁移率小或接近,y型亚基均比Dx12亚基迁移率大。8份材料中共发现了4种x型亚基新类型(Tax1,Tax2,Tax3和Tax4),5种y型亚基新类型(Tay1,Tay2,Tay3,Tay4和Tay5)和6种亚基组合类型(Tax1+Tay3,Tax3+Tay2,Tax4+Tay1,Tax1+Tay1,Tax2+Tay5,Tax4+Tay2),该项研究结果揭示了带芒草属植物可能具有与普通小麦类似的高分子量谷蛋白亚基,这些亚基在小麦品质遗传改良中具有潜在的利用价值。     

Control of antibody high and low molecular weight species by depth filtration-based cell culture harvesting

Depth filtration-based harvesting is widely used in mAb manufacturing to remove cell and process-related impurities. However, it has not been studied on control of product-related impurities, which are very critical for product quality. In this article, we studied the interactions of depth filter with high and low molecular weight species (HMWs and LMWs) for their direct removal from cell culture. The process parameters (filter, loading, temperature, and flux) were evaluated for adsorption of HMWs and LMWs by depth filters. The adsorption is significantly dependent on filter media and loading capacity and is mainly on the basis of hydrophobic interaction during harvesting. The HMW and LMW species were characterized as HMW1, HMW2, LMW1, and LMW2. The increasing binding from LMW2 to LMW1, HMW1, and HMW2 is correlated with their increasing hydrophobicity score. Adsorption using enriched HMW sample demonstrated similar total protein binding capacity (36–40 g/m²) between depth filters D0HC and X0HC. However, X0HC has stronger HMW binding than D0HC (71% vs 43% of bound protein), indicating more hydrophobic interaction in X0HC. HMW2 DBC on X0HC reached 12 g/m², similar to protein binding on hydrophobic interaction membrane adsorbers. Further study showed LMW can induce HMW formation. This study provides a critical understanding of HMW and LMW interaction with depth filters. The strategy of HMW and LMW control by depth filtration-based harvesting was implemented successfully in mAb manufacturing.     

Single-chain, low molecular weight kininogen in the blood plasma of rabbits: isolation and fragmentation by porcine pancreatic kallikrein

A highly purified preparation of low molecular weight kininogen (LMrK) was isolated from the plasminogen-free rabbit blood plasma, using chromatography on DEAE-Sepharose CL-6B, gel filtration on Ultrogel AcA 34 and Sephadex G-100 as well as gradient chromatography on a hydroxylapatite column. The yield of the 320-fold purified LMrK was 16%. Trypsin released 13-14 micrograms-eq. of bradykinin (BK) from 1 mg of LMrK or 0.85-0,95 mol of BK per mol of kininogen. Rabbit LMrK consists of one polypeptide chain of Mr 69 000 and pI 4.63. Porcine pancreatic kallikrein splits off kinin from the LMrK polypeptide chain by disrupting two peptide bonds resulting in the formation of S-S-bound two chain molecule. After reduction of the S-S bonds by dithioerithritol the latter is separated into a heavy (Mr 61 000) and light (Mr 6 800) chains. A biologically active peptide was isolated from the products of CNBr cleavage of LMrK. This peptide consists of Lys-BK elongated from the C-terminal with several amino acid residues. Rabbit LMrK closely resembles human LMrK in terms of Mr, pI and location of the kinin fragment in the protein molecule.     

The isolation of high molecular weight DNA from wheat,barley and rye for analysis by pulse-field gel electrophoresis

A method is presented for the preparation of large DNA molecules from protoplasts embedded in agarose blocks of three different cereals-hexaploid bread wheat (Triticum aestivum), barley (Hordeum vulgare) and rye (Secale cereale). Pulse-field gel electrophoresis (PFGE) analysis of these DNA preparations using a contour-clamped homogeneous field (CHEF) apparatus indicated that the size of the DNA molecules was greater than 6 Mb. DNA samples prepared by this method were shown to be useful for restriction analysis using both frequent and rare cutting enzymes.