Optimization of steam explosion as a method for increasing susceptibility of sugarcane bagasse to enzymatic saccharification

The technique of autohydrolysis steam explosion was examined as a means for pretreatment of sugarcane bagasse. Treatment conditions were optimized so that following enzymatic hydrolysis, pretreated bagasse would give 65.1 g sugars/100 g starting bagasse. Released sugars comprised 38.9 g glucose, 0.6 g cellobiose, 22.1 g xylose, and 3.5 g arabinose, and were equivalent to 83% of the anhydroglucan and 84% of the anhydroxylan content of untreated bagasse. Optimum conditions were treatment for 30 S with saturated steam at 220 degrees C with a water-to-solids ratio of 2 and the addition of 1 g H(2)SO(4)/100 g dry bagasse. Bagasse treated in this manner was not inhibitory to fermentation by Saccharomyces uvarum except at low inoculum levels when fermentation time was extended by up to 24 h. Pretreated saccharified bagasse was inhibitory to Pachysolen tannophilus and this was attributed to the formation of acetate from the hydrolysis of acetyl groups present in hemicellulose. The major advantage of the pretreatment is the achievement of high total sugar yield with moderate enzyme requirement and only minor losses due to sugar decomposition.     

Efficient conversion of sugarcane stalks into ethanol employing low temperature alkali pretreatment method

An alternative route for bio-ethanol production from sugarcane stalks (juice and bagasse) featuring a previously reported low temperature alkali pretreatment method was evaluated. Test-tube scale pretreatment-saccharification experiments were carried out to determine optimal LTA pretreatment conditions for sugarcane bagasse with regard to the efficiency of enzymatic hydrolysis of the cellulose. Free fermentable sugars and bagasse recovered from 2 kg of sugarcane stalks were jointly converted into ethanol via separate enzymatic hydrolysis and fermentation (SHF). Results showed that 98% of the cellulose present in the optimally pretreated bagasse was hydrolyzed into glucose after 72-h enzymatic saccharification using commercially available cellulase and β-glucosidase preparations at relatively low enzyme loading. The fermentable sugars in the mixture of the sugar juice and the bagasse hydrolysate were readily converted into 193.5 mL of ethanol by Saccharomyces cerevisiae within 12h, achieving 88% of the theoretical yield from the sugars and cellulose.     

Extraction and characterization of wax from sugarcane bagasse and the enzymatic hydrolysis of dewaxed sugarcane bagasse

Extraction of high-value products from agricultural wastes is an important component for sustainable bioeconomy development. In this study, wax extraction from sugarcane bagasse was performed and the beneficial effect of dewaxing pretreatment on the enzymatic hydrolysis was investigated. About 1.2% (w/w) of crude sugarcane wax was obtained from the sugarcane bagasse using the mixture of petroleum ether and ethanol (mass ratio of 1:1) as the extraction agent. Results of Fourier-transform infrared characterization and gas chromatography–mass spectrometry qualitative analysis showed that the crude sugarcane wax consisted of fatty fractions (fatty acids, fatty aldehydes, hydrocarbons, and esters) and small amount of lignin derivatives. In addition, the effect of dewaxing pretreatment on the enzymatic hydrolysis of sugarcane bagasse was also investigated. The digestibilities of cellulose and xylan in dewaxed sugarcane bagasse were 18.7 and 10.3%, respectively, compared with those of 13.1 and 8.9% obtained from native sugarcane bagasse. The dewaxed sugarcane bagasse became more accessible to enzyme due to the disruption of the outermost layer of the waxy materials.     

Study of kinetic parameters in a mechanistic model for enzymatic hydrolysis of sugarcane bagasse subjected to different pretreatments

The goal of this work is to evaluate the influence of different pretreatments in the kinetics of enzymatic hydrolysis of sugarcane bagasse and to propose a reliable methodology to easily perform sensitivity analysis and updating kinetic parameters whenever necessary. A kinetic model was modified to represent the experimental data of the batch enzymatic hydrolysis of sugarcane bagasse pretreated with alkaline hydrogen peroxide. The simultaneous estimation of kinetic parameters of the mathematical model was performed using the Pikaia genetic algorithm using batch hydrolysis experimental data obtained with different enzymatic loads. Subsequently, Plackett–Burman designs were used to identify the kinetic parameters with the higher influence on the dynamic behavior of the process variables, which were re-estimated to describe experimental data of the hydrolysis of bagasse pretreated with phosphoric acid + sodium hydroxide. The methodology was accurate and straightforward and can be used whenever there are changes in pretreatment conditions and/or fluctuations in biomass composition in different harvests.     

Enzymatic hydrolysis of sugarcane bagasse and straw mixtures pretreated with diluted acid

Abstract

In Brazil, sugarcane biomass is generated in large amounts. Sugarcane bagasse and straw are considered as an important feedstock for renewable energy and biorefinery. This paper aims to study the generation of monosaccharides (C5 and C6) from sugarcane biomass via processing bagasse or straw and mixtures of both materials (bagasse:straw 3:1, 1:1 and 1:3). Samples were pretreated with sulfuric acid which resulted in approximately 90% of hemicellulose solubilization, corresponding to around 58 g L^{? 1} of xylose. Pretreated straw showed greater susceptibility to enzymatic hydrolysis in comparison to bagasse, as shown by glucose yields of 76% and 65%, respectively, whereas the mixtures showed intermediate yields. Thus, one strategy to balance sugarcane biomass availability and possibly increasing 2G ethanol production would be to use bagasse–straw mixtures in appropriate ratios according to market fluctuations. Untreated and pretreated samples were analyzed using X-ray diffraction, but there was no relationship to enzymatic hydrolysis.     

Enzymatic hydrolysis of chemithermomechanically pretreated sugarcane bagasse and samples with reduced initial lignin content

Chemithermomechanical (CTM) processing was used to pretreat sugarcane bagasse with the aim of increasing cell wall accessibility to hydrolytic enzymes. Yields of the pretreated samples were in the range of 75-94%. Disk refining and alkaline-CTM and alkaline/sulfite-CTM pretreatments yielded pretreated materials with 21.7, 17.8, and 15.3% of lignin, respectively. Hemicellulose content was also decreased to some extent. Fibers of the pretreated materials presented some external fibrillation, fiber curling, increased swelling, and high water retention capacity. Cellulose conversion of the alkaline-CTM- and alkaline/sulfite-CTM-pretreated samples reached 50 and 85%, respectively, after 96 h of enzymatic hydrolysis. Two samples with low initial lignin content were also evaluated after the mildest alkaline-CTM pretreatment. One sample was a partially delignified mill-processed bagasse. The other was a sugarcane hybrid selected in a breeding program. Samples with lower initial lignin content were hydrolyzed considerably faster in the first 24 h of enzymatic digestion. For example, enzymatic hydrolysis of the sample with the lowest initial lignin content (14.2%) reached 64% cellulose conversion after only 24 h of hydrolysis when compared with the 30% observed for the mill-processed bagasse containing an initial lignin content of 24.4%.     

乙酸分级预处理甘蔗渣对纤维素酶解性能的影响

为提高甘蔗渣的纤维素酶解性能,采用乙酸脱木素结合碱脱乙酰基的预处理工艺 (Acetoline工艺) 对甘蔗渣进行预处理,考察了乙酸脱木素过程中若干因素对预处理结果的影响,并对预处理后甘蔗渣的纤维素酶解性能进行了研究。结果表明,经过Acetoline预处理后甘蔗渣在7.5％固体含量、15 FPU+10 CBU/g固体的纤维素酶和β-葡萄糖苷酶用量下酶解48 h,酶解聚糖转化率接近80％。与稀酸预处理相比,Acetoline预处理可以得到更高的酶解聚糖转化率。实验结果表明Acetoline工艺是一种可有效提高甘蔗渣纤维素酶解性能的预处理方法。     

Enhancement of the enzymatic digestibility of sugarcane bagasse by alkali–peracetic acid pretreatment

The enzymatic digestibility of sugarcane bagasse was greatly increased by alkali (NaOH)–peracetic acid (PAA) pretreatment under mild conditions. The effects of several factors affecting the pretreatment were investigated. It was found that when bagasse was pre-pretreated by 10% (based on initial dry materials) NaOH with 3:1 liquid-to-solid ratio at 90 °C for 1.5 h and further delignified by 10% peracetic acid (based on initial dry materials) at 75 °C for 2.5 h, the yield of reducing sugars reached 92.04% by enzymatic hydrolysis for 120 h with cellulase loading of 15 FPU/g solid. Compared with acid and alkali pretreatment, alkali–PAA pretreatment could be conducted under milder conditions and was more effective for delignification with less carbohydrates being degraded in the pretreatment process. Alkaline stage played an important role for partial delignification, swelling fibers and subsequently reducing PAA loading. No loss of cellulase activity (FPA) was observed in the liquid phase for alkali–PAA pretreated bagasse after enzymatic hydrolysis for 120 h.     

Alkaline-sulfite pretreatment and use of surfactants during enzymatic hydrolysis to enhance ethanol production from sugarcane bagasse

Sugarcane bagasse is a by-product from the sugar and ethanol industry which contains approximately 70 % of its dry mass composed by polysaccharides. To convert these polysaccharides into fuel ethanol it is necessary a pretreatment step to increase the enzymatic digestibility of the recalcitrant raw material. In this work, sugarcane bagasse was pretreated by an alkaline-sulfite chemithermomechanical process for increasing its enzymatic digestibility. Na₂SO₃ and NaOH ratios were fixed at 2:1, and three increasing chemical loads, varying from 4 to 8 % m/m Na₂SO₃, were used to prepare the pretreated materials. The increase in the alkaline-sulfite load decreased the lignin content in the pretreated material up to 35.5 % at the highest chemical load. The pretreated samples presented enhanced glucose yields during enzymatic hydrolysis as a function of the pretreatment severity. The maximum glucose yield (64 %) was observed for the samples pretreated with the highest chemical load. The use of 2.5 g l^?1 Tween 20 in the hydrolysis step further increased the glucose yield to 75 %. Semi-simultaneous hydrolysis and fermentation of the pretreated materials indicated that the ethanol yield was also enhanced as a function of the pretreatment severity. The maximum ethanol yield was 56 ± 2 % for the sample pretreated with the highest chemical load. For the sample pretreated with the lowest chemical load (2 % m/m NaOH and 4 % m/m Na₂SO₃), adding Tween 20 during the hydrolysis process increased the ethanol yield from 25 ± 3 to 39.5 ± 1 %.     

Integrated Strategies to Enhance Cellulolytic Enzyme Production Using an Instrumented Bioreactor for Solid-State Fermentation of Sugarcane Bagasse

The conversion of agro-industrial residues, such as sugarcane bagasse, into high-value products and renewable energy, within the biorefinery concept, is a potential alternative towards the sustainable management of these resources. This work evaluates the production of cellulolytic enzymes by a selected strain of Aspergillus niger cultivated in sugarcane bagasse under solid-state fermentation using an instrumented lab-scale bioreactor. The effects of environmental factors including the type of substrate and medium composition, as well as the operational conditions (air flow rate, inlet air relative humidity, and initial substrate moisture content) on the production of the enzymatic complex were evaluated using statistical design tools. Significant increases in FPase, endoglucanase, and xylanase activities were achieved under the optimized conditions predicted by the models, with values of 0.88, 21.77, and 143.85 IU/g of dry solid substrate, respectively, representing around ten-, four-, and twofold increases compared to the activities obtained under the initial growth conditions. This demonstrates the importance of evaluating environmental and operational criteria in order to achieve efficient enzyme production. The crude enzymatic extract obtained under optimized conditions was employed for enzymatic hydrolysis of pretreated sugarcane bagasse. Approximately 13 % of total reducing sugars, and a glucose concentration of 2.54 g/L, were obtained after 22 h of hydrolysis of steam exploded sugarcane bagasse, indicating that the enzymatic cocktail produced has good potential for use in the conversion of biomass.     

Combined ensiling and hydrothermal processing as efficient pretreatment of sugarcane bagasse for 2G bioethanol production

Background

Ensiling cannot be utilized as a stand-alone pretreatment for sugar-based biorefinery processes but, in combination with hydrothermal processing, it can enhance pretreatment while ensuring a stable long-term storage option for abundant but moist biomass. The effectiveness of combining ensiling with hydrothermal pretreatment depends on biomass nature, pretreatment, and silage conditions.

Results

In the present study, the efficiency of the combined pretreatment was assessed by enzymatic hydrolysis and ethanol fermentation, and it was demonstrated that ensiling of sugarcane bagasse produces organic acids that can partly degrade biomass structure when in combination with hydrothermal treatment, with the consequent improvement of the enzymatic hydrolysis of cellulose and of the overall 2G bioethanol process efficiency. The optimal pretreatment conditions found in this study were those using ensiling and/or hydrothermal pretreatment at 190 °C for 10 min as this yielded the highest overall glucose recovery yield and ethanol yield from the raw material (0.28–0.30 g/g and 0.14 g/g, respectively).

Conclusion

Ensiling prior to hydrothermal pretreatment offers a controlled solution for wet storage and long-term preservation for sugarcane bagasse, thus avoiding the need for drying. This preservation method combined with long-term storage practice can be an attractive option for integrated 1G/2G bioethanol plants, as it does not require large capital investments or energy inputs and leads to comparable or higher overall sugar recovery and ethanol yields.

     

Comparative hydrolysis and fermentation of sugarcane and agave bagasse

Sugarcane and agave bagasse samples were hydrolyzed with either mineral acids (HCl), commercial glucanases or a combined treatment consisting of alkaline delignification followed by enzymatic hydrolysis. Acid hydrolysis of sugar cane bagasse yielded a higher level of reducing sugars (37.21% for depithed bagasse and 35.37% for pith bagasse), when compared to metzal or metzontete (agave pinecone and leaves, 5.02% and 9.91%, respectively). An optimized enzyme formulation was used to process sugar cane bagasse, which contained Celluclast, Novozyme and Viscozyme L. From alkaline–enzymatic hydrolysis of sugarcane bagasse samples, a reduced level of reducing sugar yield was obtained (11–20%) compared to agave bagasse (12–58%). Selected hydrolyzates were fermented with a non-recombinant strain of Saccharomyces cerevisiae. Maximum alcohol yield by fermentation (32.6%) was obtained from the hydrolyzate of sugarcane depithed bagasse. Hydrolyzed agave waste residues provide an increased glucose decreased xylose product useful for biotechnological conversion.     

Alkali‐based AFEX pretreatment for the conversion of sugarcane bagasse and cane leaf residues to ethanol

Sugarcane is one of the major agricultural crops cultivated in tropical climate regions of the world. Each tonne of raw cane production is associated with the generation of 130 kg dry weight of bagasse after juice extraction and 250 kg dry weight of cane leaf residue postharvest. The annual world production of sugarcane is ～1.6 billion tones, generating 279 MMT tones of biomass residues (bagasse and cane leaf matter) that would be available for cellulosic ethanol production. Here, we investigated the production of cellulosic ethanol from sugar cane bagasse and sugar cane leaf residue using an alkaline pretreatment: ammonia fiber expansion (AFEX). The AFEX pretreatment improved the accessibility of cellulose and hemicelluloses to enzymes during hydrolysis by breaking down the ester linkages and other lignin carbohydrate complex (LCC) bonds and the sugar produced by this process is found to be highly fermentable. The maximum glucan conversion of AFEX pretreated bagasse and cane leaf residue by cellulases was ～85%. Supplementation with hemicellulases during enzymatic hydrolysis improved the xylan conversion up to 95–98%. Xylanase supplementation also contributed to a marginal improvement in the glucan conversion. AFEX‐treated cane leaf residue was found to have a greater enzymatic digestibility compared to AFEX‐treated bagasse. Co‐fermentation of glucose and xylose, produced from high solid loading (6% glucan) hydrolysis of AFEX‐treated bagasse and cane leaf residue, using the recombinant Saccharomyces cerevisiae (424A LNH‐ST) produced 34–36 g/L of ethanol with 92% theoretical yield. These results demonstrate that AFEX pretreatment is a viable process for conversion of bagasse and cane leaf residue into cellulosic ethanol. Biotechnol. Bioeng. 2010;107: 441–450. © 2010 Wiley Periodicals, Inc.     

Low temperature alkali pretreatment for improving enzymatic digestibility of sweet sorghum bagasse for ethanol production

A low temperature alkali pretreatment method was proposed for improving the enzymatic hydrolysis efficiency of lignocellulosic biomass for ethanol production. The effects of the pretreatment on the composition, structure and enzymatic digestibility of sweet sorghum bagasse were investigated. The mechanisms involved in the digestibility improvement were discussed with regard to the major factors contributing to the biomass recalcitrance. The pretreatment caused slight glucan loss but significantly reduced the lignin and xylan contents of the bagasse. Changes in cellulose crystal structure occurred under certain treatment conditions. The pretreated bagasse exhibited greatly improved enzymatic digestibility, with 24-h glucan saccharification yield reaching as high as 98% using commercially available cellulase and β-glucosidase. The digestibility improvement was largely attributed to the disruption of the lignin-carbohydrate matrix. The bagasse from a brown midrib (BMR) mutant was more susceptible to the pretreatment than a non-BMR variety tested, and consequently gave higher efficiency of enzymatic hydrolysis.     

Pretreatment of sugarcane bagasse using supercritical carbon dioxide combined with ultrasound to improve the enzymatic hydrolysis

This work evaluates the pretreatment of sugarcane bagasse combining supercritical carbon dioxide (SC-CO₂) and ultrasound to enhance the enzymatic hydrolysis of pretreated bagasse. In a first step the influence of process variables on the SC-CO₂ pretreatment to enhance the enzymatic hydrolysis was evaluated by mean of a Plackett–Burmann design. Then, the sequential treatment combining ultrasound + SC-CO₂ was evaluated. Results show that treatment using SC-CO₂ increased the amount of fermentable sugar obtained of about 280% compared with the non-treated bagasse, leading to a hydrolysis efficiency (based on the amount of cellulose) as high as 74.2%. Combining ultrasound + SC-CO₂ treatment increased about 16% the amount of fermentable sugar obtained by enzymatic hydrolysis in comparison with the treatment using only ultrasound. From the results presented in this work it can be concluded that the combined ultrasound + SC-CO₂ treatment is an efficient and promising alternative to carry out the pretreatment of lignocellulosic feedstock at relatively low temperatures without the use of hazardous solvents.     

Utilization of sugarcane bagasse for bioethanol production: sono-assisted acid hydrolysis approach

In this study, the production of sugar monomers from sugarcane bagasse (SCB) by sono-assisted acid hydrolysis was performed. The SCB was subjected to sono-assisted alkaline pretreatment. The cellulose and hemicellulose recovery observed in the solid content was 99% and 78.95%, respectively and lignin removal observed during the pretreatment was about 75.44%. The solid content obtained was subjected to sono-assisted acid hydrolysis. Under optimized conditions, the maximum hexose and pentose yield observed was 69.06% and 81.35% of theoretical yield, respectively. The hydrolysate obtained was found to contain very less inhibitors, which improved the bioethanol production and the ethanol yield observed was 0.17 g/g of pretreated SCB.     

The effects of four different pretreatments on enzymatic hydrolysis of sweet sorghum bagasse

Four pretreatment processes including ionic liquids, steam explosion, lime, and dilute acid were used for enzymatic hydrolysis of sweet sorghum bagasse. Compared with the other three pretreatment approaches, steam-explosion pretreatment showed the greatest improvement on enzymatic hydrolysis of the bagasse. The maximum conversion of cellulose and the concentration of glucose obtained from enzymatic hydrolysis of steam explosion bagasse reached 70% and 25 g/L, respectively, which were both 2.5 times higher than those of the control (27% and 11 g/L). The results based on the analysis of SEM photos, FTIR, XRD and NMR detection suggested that both the reduction of crystallite size of cellulose and cellulose degradation from the Iα and Iβ to the Fibril surface cellulose and amorphous cellulose were critical for enzymatic hydrolysis. These pretreatments disrupted the crystal structure of cellulose and increased the available surface area, which made the cellulose better accessible for enzymatic hydrolysis.     

Preparation of hydrolysates from tobacco stalks and ethanolic fermentation by Saccharomyces cerevisiae

Chipped tobacco stalks were subjected to steam pretreatment at 205 °C for either 5 or 10 min before enzymatic hydrolysis. Glucose (15.4–17.1 g/l) and xylose (4.5–5.0 g/l) were the most abundant monosaccharides in the hydrolysates. Mannose, galactose and arabinose were also detected. The hydrolysate produced by pretreatment for 10 min contained higher levels of all sugars than the 5 min-pretreated hydrolysate. The amounts of inhibitory compounds found in the hydrolysates were relatively low and increased with increasing pretreatment time. The hydrolysates were fermented with baker's yeast. Ethanol yield, maximum volumetric productivity and specific productivity were used as criteria of fermentability of the hydrolysates. The fermentation of the hydrolysates was only slightly inhibited compared to reference solutions having a similar composition of fermentable sugars. The ethanol yield in the hydrolysates was 0.38–0.39 g/g of initial fermentable sugars, whereas it was 0.42 g/g in the reference. The biomass yield was twofold lower in the hydrolysates than in the reference. The fermentation inhibition caused by the tobacco stalk hydrolysates was less than that caused by sugarcane bagasse hydrolysates obtained under the same hydrolysis conditions.     

氨基磺酸应用于甘蔗渣预处理的研究

本研究尝试将氨基磺酸应用于甘蔗渣预处理,探究其作为酸预处理试剂对甘蔗渣成分和酶解的影响。氨基磺酸预处理最优条件为浓度3%,温度121℃,预处理1 h。在该条件下,甘蔗渣的固体回收率为64.45%,半纤维素和木质素去除率分别为70.81%和25.10%,纤维素损失率仅7.56%。与硫酸、盐酸预处理相比,氨基磺酸的半纤维素和木质素去除率不如硫酸、盐酸预处理,但固体回收率更高,纤维素损失率低,能保留更多纤维素有效成分。进一步酶解显示,氨基磺酸预处理的纤维素转化率高于硫酸、盐酸预处理。氨基磺酸作为一种新的酸预处理试剂,在木质纤维素降解上有良好应用前景。     

An effective chemical pretreatment method for lignocellulosic biomass with substituted imidazoles

Lignocellulosic biomass is the most abundant naturally renewable organic resource for biofuel production. Because of its recalcitrance to enzymatic degradation, pretreatment is a crucial step before hydrolysis of the feedstock. A variety of pretreatment methods have been developed and intensively studied to achieve optimal yield without imposing significant adverse impact on the environment. Herein, we present a novel chemical pretreatment method using substituted heterocycles with low temperature and short residence time requirements. 1‐Methylimidazole (MI) is a precursor to some imidazolium‐based ionic liquids. In this study, its potential utilization as a biomass pretreatment agent is being investigated for the first time. At mild conditions, such as 25°C for 5 min at ambient pressure, a substantial increase in the hydrolysis rate throughout the entire course of conversion for cellulose substrate was obtained. Furthermore, the pretreatment effectiveness of MI on both untreated and steam‐exploded lignocellulosic biomass including loblolly pine, switchgrass, and sugarcane bagasse has been studied and MI was found to be an efficient delignifier. Remarkable rate enhancement was also observed for the non‐woody lignocellulosic substrates after a short period of MI pretreatment at ambient conditions. The mechanism of MI pretreatment is explored through analysis of cellulose physical properties including crystallinity index, degree of polymerization, accessibility, and lignin dissolution quantification. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 31:25–34, 2015