Air sampling methods for VOCs related to field-scale biosecure swine mortality composting

Monitoring specific volatile organic compounds (VOCs) as markers of biosecure carcass degradation is a promising method to test progress and completion of the composting process. The objective of this study was to test the feasibility of using existing aeration ducts in composting units as practical sampling locations. The secondary objective was to test the feasibility of using marker VOC concentrations in aeration ducts to elucidate information about airflow patterns inside composting units. Marker VOC concentrations were significantly higher in the upper aeration duct and this duct can typically be used to collect air samples instead of placing special air sampling probes inside the composting units. Occasionally, the airflow direction inside composting units can change. Marker VOC concentrations can be used to decide the airflow direction inside the composting units. In this study, higher VOC concentrations were measured from the upper aeration duct, and this duct was shown to be an outlet.     

Dissociation of neuronal and psychophysical responses to local and global motion

Most neurons in cortical area MT (V5) are strongly direction selective, and their activity is closely associated with the perception of visual motion. These neurons have large receptive fields built by combining inputs with smaller receptive fields that respond to local motion. Humans integrate motion over large areas and can perceive what has been referred to as global motion. The large size and direction selectivity of MT receptive fields suggests that MT neurons may represent global motion. We have explored this possibility by measuring responses to a stimulus in which the directions of simultaneously presented local and global motion are independently controlled. Surprisingly, MT responses depended only on the local motion and were unaffected by the global motion. Yet, under similar conditions, human observers perceive global motion and are impaired in discriminating local motion. Although local motion perception might depend on MT signals, global motion perception depends on mechanisms qualitatively different from those in MT. Motion perception therefore does not depend on a single cortical area but reflects the action and interaction of multiple brain systems.     

The Action Of Sulphur As A Fungicide And As An Acaricide

The conclusion arrived at by chemical methods, that the volatile agent produced when sulphur is applied to a heated surface is gaseous sulphur, has been subjected to biological tests in which the fungi Ery-siphe graminis and Sphaerotheca Humulind the gall mite Eriophyes ribis were employed.
The fungi were found not to be sufficiently sensitive to yield satisfactory and concordant results and strong support is given to the view that actual contact of the sulphur particle with the fungus is necessary before fungicidal action can occur.
It was shown that the agent present in air passed over heated sulphur and responsible for the death of the gall mite was not removed by filtration through a heated glass-wool plug, this observation being contrary to the view that the toxic agent is produced initially in solid form.
Filtration through a cooled glass-wool plug only removed part of the volatile agent and it was shown that the gall mite is affected by the traces of sulphur volatilised at ordinary temperatures.
The results of the experiments with the gall mite were in complete accord with those obtained in the previous chemical work.
At relatively large concentrations sulphur dioxide and hydrogen sulphide are without permanent effect upon the gall mite and these gases are therefore not responsible for the acaricidal action of sulphur.     

Covalent bound sensing layers on surface acoustic wave (SAW) biosensors

This paper reports on the development of immunosensors based on commercially available surface acoustic wave (SAW) devices working at 380 MHz. Approaches for coating the sensor surface with a sensing layer of receptive biomolecules are presented and discussed. It was found that the sensitivity strongly relates to the immobilization method. Additionally, the sensitivity can be influenced by the density of accessible biomolecules on the active sensing area. Usually, by most of the standard immobilization procedures, two-dimensional layers of receptive biomolecules are obtained. We present a three-dimensional layer, which provides a higher absolute amount of recognition molecules. A dextran layer is photoimmobilized to the sensor surface and the recognition molecules are covalently embedded into the dextran matrix. The feasibility of specific immunosensing is investigated using SAW sensors connected to a fluid handling system.     

An innovative online VFA monitoring system for the anerobic process, based on headspace gas chromatography

A new method for online measurement of volatile fatty acids (VFA) in anerobic digesters has been developed based on headspace gas chromatography (HSGC). The method applies ex situ VFA stripping with variable headspace volume and gas analysis by gas chromatography-flame ionization detection (GC-FID). In each extraction, digester sample was acidified with H(3)PO(4) and NaHSO(4), then heated to strip the VFA into the gas phase. The gas was sampled in a low friction glass syringe before injected into the GC for measurement. The system has been tested for online monitoring of a lab-scale CSTR reactor treating manure for more than 6 months and has shown good agreement with off-line analysis. The system is capable of measuring individual VFA components. This is of advantage since specific VFA components such as propionic and butyric acid can give extra information about the process status. Another important advantage of this sensor is that there is no filtration, which makes possible application in high solids environments. The system can thus be easily applied in a full-scale biogas reactor by connecting the system to the liquid circulation loop to obtain fresh sample from the reactor. Local calibration is needed but automatic calibration is also possible using standard addition method. Sampling duration is 25-40 min, depending on the washing duration, and sensor response is 10 min. This is appropriate for full-scale reactors, since dynamics within most biogas reactors are of the order of several hours.     

Biomechatronics--assisting the impaired motor system

Biomechatronics concerns the interdisciplinary field of interaction with the human neuromuscular-skeletal system with the objective to assist impaired human motor control. In this field technology is developed that integrates neuroscience, robotics, interface and sensor technology, dynamic systems and control theory. The primary issue in this field concerns the concepts of assisting impaired human motor function. The secondary, derived, issue concerns possible methods of interfacing with the human body at all hierarchical levels of the human motor system. The application of motor assist systems may serve several goals: it can take over part of the affected motor control, enable the physiological motor system to perform the desired function or aid in training the impaired physiological system. The progress in these issues are reviewed and their potential implications for assistance of the impaired human motor system are discussed.     

Neurons as sensors: individual and cascaded chemical sensing

A single neuron sensor has been developed based on the interaction of gradient electric fields and the cell membrane. Single neurons are rapidly positioned over individual microelectrodes using positive dielectrophoretic traps. This enables the continuous extracellular electrophysiological measurements from individual neurons. The sensor developed using this technique provides the first experimental method for determining single cell sensitivity; the speed of response and the associated physiological changes to a broad spectrum of chemical agents. Binding of specific chemical agents to a specific combination of receptors induces changes to the extracellular membrane potential of a single neuron, which can be translated into unique “signature patterns” (SP), which function as identification tags. Signature patterns are derived using Fast Fourier Transformation (FFT) analysis and Wavelet Transformation (WT) analysis of the modified extracellular action potential. The validity and the sensitivity of the system are demonstrated for a variety of chemical agents ranging from behavior altering chemicals (ethanol), environmentally hazardous agents (hydrogen peroxide, EDTA) to physiologically harmful agents (pyrethroids) at pico- and femto-molar concentrations. The ability of a single neuron to selectively identify specific chemical agents when injected in a serial manner is demonstrated in “cascaded sensing”.     

鸡嗉子榕隐头果雌花期特征对传粉榕小蜂选择的影响

为了探讨榕树隐头果的发育期、性别、大小等外部特征对传粉榕小蜂选择的影响,采取人为控制雌花期的方法,对鸡嗉子榕(Ficus sermicordata)及其传粉榕小蜂(Ceratosolen gravelyi)的选择行为进行研究。结果表明,在隐头花序发育到雌花期后,如果阻止传粉小蜂进入,隐头果会继续生长。直径较小的雌果和雄果的进蜂量较多,且在雌雄果同时存在时,小蜂仍然会选择进入雌果,但进蜂量显著低于雄果。小蜂优先选择进入雌花期前期的隐头花序,雌雄果皆有此特点。对于相同发育期的隐头果,果径和进蜂量呈正相关关系,说明对于相同发育期的隐头果,小蜂更倾向于进入较大的隐头果。因此,真正控制小蜂行为的是隐头花序所处的发育期,以及不同发育期所产生的化学挥发物,而非隐头果直径大小。这为进一步研究榕-蜂系统的稳定机制提供依据。     

Simulations of airflow and substance concentration around a human body

In order to predict airflow and suspended substance concentration around a human body, we developed a geometric model of the human form and generated grids around it for Computational Fluid Dynamics (CFD). According to a CFSV model proposed by us we made a domain that included a geometric human model and generated the grids within this domain. By using this model with the grids and the developed CFD program, it is possible to simulate the airflow and the transfer of a suspended substance around the body. The simulated airflow provided a different velocity profile for each region of the body due to the characteristics of the body shape. The simulated distribution of the suspended substance concentration demonstrates how usable the present model is for quantifying a substance in any exposed region of the body.     

Aroma sensing and indoor air monitoring by quartz crystal resonators with sensory films prepared by sputtering of biomaterials and sintered polymers

Thickness shear mode quartz-crystal resonator coated with plasma polymer films (PPFs) produced by radio-frequency sputtering of biomaterials and synthetic polymers were examined with respect to their abilities to continuously monitor indoor air. We confirmed the sensory capabilities of an array of PPF sensors to aromas emitted from essential oils at concentrations as low as the detection threshold of human olfaction. Changes in humidity induced a drift in the response curves of PPF sensors. On the contrary, volatile compounds exhibited pulse signals. The pulse signals of a D-phenylalanine sensor and a polyethylene sensor were synchronous, but the direction of the peaks was inverted in most cases. Compared with a photo-ionization detector sensor, the PPF sensors were able to detect subtle changes in the concentrations of volatile compounds in indoor air.     

Selection of a battery of rapid toxicity sensors for drinking water evaluation

Comprehensive identification of chemical contaminants in Army field water supplies can be a lengthy process, but rapid analytical methods suitable for field use are limited. A complementary approach is to directly measure toxicity instead of individual chemical constituents. Ten toxicity sensors utilizing enzymes, bacteria, or vertebrate cells were tested to determine the minimum number of sensors that could rapidly identify toxicity in water samples containing one of 12 industrial chemicals. The ideal sensor would respond at a concentration just exceeding the Military Exposure Guideline (MEG) level for the chemical (an estimated threshold for adverse effects) but below the human lethal concentration. Chemical solutions were provided to testing laboratories as blind samples. No sensors responded to deionized water blanks, and only one sensor responded to a hard water blank. No single toxicity sensor responded to more than six chemicals in the desired response range, and one chemical (nicotine) was not detected by any sensor with the desired sensitivity. A combination of three sensors (Microtox, the Electric Cell Substrate Impedance Sensing (ECIS) test, and the Hepatocyte low density lipoprotein (LDL) uptake test) responded appropriately to nine of twelve chemicals. Adding a fourth sensor (neuronal microelectrode array) to the test battery allowed detection of two additional chemicals (aldicarb and methamidophos), but the neuronal microelectrode array was overly sensitive to paraquat. Evaluating sensor performance using a standard set of chemicals and a desired sensitivity range provides a basis both for selecting among available toxicity sensors and for evaluating emerging sensor technologies. Recommendations for future toxicity sensor evaluations are discussed.     

First Evidence of a Volatile Sex Pheromone in Lady Beetles

To date, volatile sex pheromones have not been identified in the Coccinellidae family; yet, various studies have suggested that such semiochemicals exist. Here, we collected volatile chemicals released by virgin females of the multicolored Asian lady beetle, Harmonia axyridis (Pallas), which were either allowed or not allowed to feed on aphids. Virgin females in the presence of aphids, exhibited “calling behavior”, which is commonly associated with the emission of a sex pheromone in several Coleoptera species. These calling females were found to release a blend of volatile compounds that is involved in the remote attraction (i.e., from a distance) of males. Gas Chromatography-Mass Spectrometry (GC-MS) analyses revealed that (–)-β-caryophyllene was the major constituent of the volatile blend (ranging from 80 to 86%), with four other chemical components also being present; β-elemene, methyl-eugenol, α-humulene, and α-bulnesene. In a second set of experiments, the emission of the five constituents identified from the blend was quantified daily over a 9-day period after exposure to aphids. We found that the quantity of all five chemicals significantly increased across the experimental period. Finally, we evaluated the activity of a synthetic blend of these chemicals by performing bioassays which demonstrated the same attractive effect in males only. The results confirm that female H. axyridis produce a volatile sex pheromone. These findings have potential in the development of more specific and efficient biological pest-control management methods aimed at manipulating the behavior of this invasive lady beetle.     

Can chemical signals,responsible for mutualistic partner encounter,promote the specific exploitation of nursery pollination mutualisms? – The case of figs and fig wasps

In nursery pollination mutualisms, where pollinators reproduce within the inflorescence they pollinate, floral scents often play a major role in advertizing host location and rewards for the pollinator. However, chemical messages emitted by the plant that are responsible for the encounter of mutualist partners can also be used by parasites of these mutualisms to locate their host. Each species of Ficus (Moraceae) is involved in an obligatory nursery pollination mutualism with usually one pollinating fig wasp (Hymenoptera: Chalcidoidea: Agaonidae). In this interaction, volatile compounds emitted by receptive figs are responsible for the attraction of their specific pollinator. However, a large and diverse community of non-pollinating chalcidoid wasps can also parasitize this mutualism. We investigated whether the chemical message emitted by figs to attract their pollinator can promote the host specificity of non-pollinating fig wasps. We analysed the volatile compounds emitted by receptive figs of three sympatric Ficus species, namely, Ficus hispida L., Ficus racemosa L., and Ficus tinctoria G. Forster, and tested the attraction of the pollinator of F. hispida ( Ceratosolen solmsi marchali Mayr), and of one species of non-pollinating fig wasp [ Philotrypesis pilosa Mayr (Hymenoptera: Chalcidoidea: Pteromalidae)] to scents emitted by receptive figs of these three Ficus species. Analysis of the volatile compounds emitted by receptive figs revealed that the three Ficus species could be clearly distinguished by their chemical composition. Behavioural bioassays performed in a Y-tube olfactometer showed that both pollinator and parasite were attracted only by the specific odour of F. hispida . These results suggest that the use by non-pollinating fig wasps of a specific chemical message produced by figs could limit host shifts by non-pollinating fig wasps.     

An intelligent rapid odour recognition model in discrimination of Helicobacter pylori and other gastroesophageal isolates in vitro

Two series of experiments are reported which result in the discrimination between Helicobacter pylori and other bacterial gastroesophageal isolates using a newly developed odour generating system, an electronic nose and a hybrid intelligent odour recognition system. In the first series of experiments, after 5 h of growth (37 degrees C), 53 volatile 'sniffs' were collected over the headspace of complex broth cultures of the following clinical isolates: Staphylococcus aureus, Klebsiella sp., H. pylori, Enterococcus faecalis (10(7) ml(-1)), Mixed infection (Proteus mirabilis, Escherichia coli, and E. faecalis 3 x 10(6) ml each) and sterile cultures. Fifty-six normalised variables were extracted from 14 conductive polymer sensor responses and analysed by a 3-layer back propagation neural network (NN). The NN prediction rate achieved was 98% and the test data (37.7% of all data) was recognised correctly. Successful clustering of bacterial classes was also achieved by discriminant analysis (DA) of a normalised subset of sensor data. Cross-validation identified correctly seven 'unknown' samples. In the second series of experiments after 150 min of microaerobic growth at 37 degrees C, 24 volatile samples were collected over the headspace of H. pylori cultures in enriched (HPP) and normal (HP) media and 11 samples over sterile (N) cultures. Forty-eight sensor parameters were extracted from 12 sensor responses and analysed by a 3-layer NN previously optimised by a genetic algorithm (GA). GA-NN analysis achieved a 94% prediction rate of 'unknown' data. Additionally the 'genetically' selected 16 input neurones were used to perform DA-cross validation that showed a clear clustering of three groups and reclassified correctly nine 'sniffs'. It is concluded that the most important factors that govern the performance of an intelligent bacterial odour detection system are: (a) an odour generation mechanism, (b) a rapid odour delivery system similar to the mammalian olfactory system, (c) a gas sensor array of high reproducibility and (d) a hybrid intelligent model (expert system) which will enable the parallel use of GA-NNs and multivariate techniques.     

Relevance of body size and shell colouration for thermal absorption and heat loss in white garden snails,Theba pisana (Helicidae), from Northern France

The internal temperature of land snails depends on environmental factors, such as exposure to electromagnetic radiation and airflow as well as biotic factors including shell size, shell colouration and thickness or the resting position of the snail. In controlled field experiments, we quantified heating by thermal absorption of light and airflow-induced heat loss in the white garden snail, Theba pisana, from Normandy, France. Heating experiments revealed a significant positive relation of the internal body temperature with illumination period, shell temperature and air temperature at different times of day. The size of the snails was negatively related with both of the given illumination times: smaller animals heated up stronger than larger ones. The temperature at the surface of the shell significantly depended on the illumination period and the time of day. An AIC-based quality assessment of multiple linear modelling showed that, for explaining both shell surface and internal temperature of the soft body, several factors, i.e., exposure time, daytime, shell size and colouration contributed to the best models, respectively. Similarly, heat loss of the soft body after and during exposure of the snails to sunlight by a constant airflow depended on the initial body temperature, shell size, colouration and ambient air temperature. Our study revealed also the importance of both shell size and colouration for the loss of body temperature under natural conditions: small and banded animals that had heated up to temperatures above 30 °C cooled down faster than large and un-banded ones.     

Highly-sensitive and label-free indium phosphide biosensor for early phytopathogen diagnosis

Basophil activation in response to antigen may represent specificities of type I allergy of individuals and their reactions in the body. We previously demonstrated that surface plasmon resonance (SPR) sensor could detect the activation of human basophils in response to antigens. In this study, we further developed a technique based on SPR imaging (SPRI) system to detect reactions of individual basophils isolated from human blood, and investigated the potential of this sensor as a tool for diagnosis of type I allergy. To detect the change of refractive index (RI) in individual basophils, human basophils were isolated by negative selection with antibodies conjugated with magnetic beads, fixed on a gold film with anti-basophil antibody and stimulated with various antigens under the measurement of SPRI. The sensor could detect the reactions of individual basophils in response to specific antigens as well as non-specific activators. Moreover, the sensor well allocated two spots of basophils on a sensor chip and detected individual reactions to antigen. Thus, the technique developed in this study can visualize the effect of various stimuli or inhibitors on basophils as change of intracellular RI distribution at the single cell level. In combination with a device to rapidly isolate basophils from peripheral blood, this technique may be a useful tool as a high throughput screening system in clinical diagnosis for type I allergy.     

Transient Receptor Potential Channels Encode Volatile Chemicals Sensed by Rat Trigeminal Ganglion Neurons

Primary sensory afferents of the dorsal root and trigeminal ganglia constantly transmit sensory information depicting the individual’s physical and chemical environment to higher brain regions. Beyond the typical trigeminal stimuli (e.g. irritants), environmental stimuli comprise a plethora of volatile chemicals with olfactory components (odorants). In spite of a complete loss of their sense of smell, anosmic patients may retain the ability to roughly discriminate between different volatile compounds. While the detailed mechanisms remain elusive, sensory structures belonging to the trigeminal system seem to be responsible for this phenomenon. In order to gain a better understanding of the mechanisms underlying the activation of the trigeminal system by volatile chemicals, we investigated odorant-induced membrane potential changes in cultured rat trigeminal neurons induced by the odorants vanillin, heliotropyl acetone, helional, and geraniol. We observed the dose-dependent depolarization of trigeminal neurons upon application of these substances occurring in a stimulus-specific manner and could show that distinct neuronal populations respond to different odorants. Using specific antagonists, we found evidence that TRPA1, TRPM8, and/or TRPV1 contribute to the activation. In order to further test this hypothesis, we used recombinantly expressed rat and human variants of these channels to investigate whether they are indeed activated by the odorants tested. We additionally found that the odorants dose-dependently inhibit two-pore potassium channels TASK1 and TASK3 heterologously expressed In Xenopus laevis oocytes. We suggest that the capability of various odorants to activate different TRP channels and to inhibit potassium channels causes neuronal depolarization and activation of distinct subpopulations of trigeminal sensory neurons, forming the basis for a specific representation of volatile chemicals in the trigeminal ganglia.     

Neural Mechanisms of Cortical Motion Computation Based on a Neuromorphic Sensory System

The visual cortex analyzes motion information along hierarchically arranged visual areas that interact through bidirectional interconnections. This work suggests a bio-inspired visual model focusing on the interactions of the cortical areas in which a new mechanism of feedforward and feedback processing are introduced. The model uses a neuromorphic vision sensor (silicon retina) that simulates the spike-generation functionality of the biological retina. Our model takes into account two main model visual areas, namely V1 and MT, with different feature selectivities. The initial motion is estimated in model area V1 using spatiotemporal filters to locally detect the direction of motion. Here, we adapt the filtering scheme originally suggested by Adelson and Bergen to make it consistent with the spike representation of the DVS. The responses of area V1 are weighted and pooled by area MT cells which are selective to different velocities, i.e. direction and speed. Such feature selectivity is here derived from compositions of activities in the spatio-temporal domain and integrating over larger space-time regions (receptive fields). In order to account for the bidirectional coupling of cortical areas we match properties of the feature selectivity in both areas for feedback processing. For such linkage we integrate the responses over different speeds along a particular preferred direction. Normalization of activities is carried out over the spatial as well as the feature domains to balance the activities of individual neurons in model areas V1 and MT. Our model was tested using different stimuli that moved in different directions. The results reveal that the error margin between the estimated motion and synthetic ground truth is decreased in area MT comparing with the initial estimation of area V1. In addition, the modulated V1 cell activations shows an enhancement of the initial motion estimation that is steered by feedback signals from MT cells.     

Heat flux measurements for use in physiological and clothing research

Scientists use passive heat flow meters to measure body heat exchanges with the environment. In recent years, several such sensors have been developed and concerns about their proper calibration have been addressed. However, calibration methods have differed in the geometry of the heated device as well as in the heat transfer mechanism. Therefore, a comparison of calibration methods is needed in order to understand the obtained differences in calibration lines. We chose three commercially available heat flux sensors and placed them on four different heated devices: a hot plate, double hot plate, nude cylinder and a cylinder covered with a spacer material. We found differences between the calibration line of the manufacturer and our own measurements, especially when forced convection was involved as the main heat transfer mechanism. The results showed clearly that the calibration method should be chosen according to the intended purpose of use. In addition, we recommend use a thin, light heat flux sensor with good thermal conduction in human subject studies.