Probing the role of a secondary structure element at the 5'- and 3'-splice sites in group I intron self-splicing: the tetrahymena L-16 ScaI ribozyme reveals a new role of the G.U pair in self-splicing

Several ribozyme constructs have been used to dissect aspects of the group I self-splicing reaction. The Tetrahymena L-21 ScaI ribozyme, the best studied of these intron analogues, catalyzes a reaction analogous to the first step of self-splicing, in which a 5'-splice site analogue (S) and guanosine (G) are converted into a 5'-exon analogue (P) and GA. This ribozyme preserves the active site but lacks a short 5'-terminal segment (called the IGS extension herein) that forms dynamic helices, called the P1 extension and P10 helix. The P1 extension forms at the 5'-splice site in the first step of self-splicing, and P10 forms at the 3'-splice site in the second step of self-splicing. To dissect the contributions from the IGS extension and the helices it forms, we have investigated the effects of each of these elements at each reaction step. These experiments were performed with the L-16 ScaI ribozyme, which retains the IGS extension, and with 5'- and 3'-splice site analogues that differ in their ability to form the helices. The presence of the IGS extension strengthens binding of P by 40-fold, even when no new base pairs are formed. This large effect was especially surprising, as binding of S is essentially unaffected for S analogues that do not form additional base pairs with the IGS extension. Analysis of a U.U pair immediately 3' to the cleavage site suggests that a previously identified deleterious effect from a dangling U residue on the L-21 ScaI ribozyme arises from a fortuitous active site interaction and has implications for RNA tertiary structure specificity. Comparisons of the affinities of 5'-splice site analogues that form only a subset of base pairs reveal that inclusion of the conserved G.U base pair at the cleavage site of group I introns destabilizes the P1 extension >100-fold relative to the stability of a helix with all Watson-Crick base pairs. Previous structural data with model duplexes and the recent intron structures suggest that this effect can be attributed to partial unstacking of the P1 extension at the G.U step. These results suggest a previously unrecognized role of the G.U wobble pair in self-splicing: breaking cooperativity in base pair formation between P1 and the P1 extensions. This effect may facilitate replacement of the P1 extension with P10 after the first chemical step of self-splicing and release of the ligated exons after the second step of self-splicing.     

RNA splicing: group I intron crystal structures reveal the basis of splice site selection and metal ion catalysis

The group I intron has served as a model for RNA catalysis since its discovery 25 years ago. Four recently determined high-resolution crystal structures complement extensive biochemical studies on this system. Structures of the Azoarcus, Tetrahymena and bacteriophage Twort group I introns mimic different states of the splicing or ribozyme reaction pathway and provide information on splice site selection and metal ion catalysis. The 5'-splice site is selected by formation of a conserved G.U wobble pair between the 5'-exon terminus and the intron. The 3'-splice site is identified through stacking of three base triples, in which the middle triple contains the conserved terminal nucleotide of the intron, OmegaG. The structures support a two-metal-ion mechanism for group I intron splicing that might have corollaries to group II intron and pre-mRNA splicing by the spliceosome.     

Role of a conserved J8/7 X P4 base-triple in the Tetrahymena ribozyme

The Tetrahymena group I intron ribozyme folds into a complex three dimensional structure for performing the self-splicing reaction. Catalysis depends on its core structure comprising two helical domains, P4-P6 and P3-P7. The two domains are joined by three sets of conserved base-triple(s) and other tertiary interactions. We found that the disruption of J8/7 X P4, one such conserved base-triple, causes the catalytic ability to deteriorate without altering the folding rate. This suggests that the base-triple stabilizes the active structure of the ribozyme but plays no significant role in RNA folding. By combining the present and previous results, it can be concluded that three sets of conserved base-triples play distinct roles in the Tetrahymena ribozyme.     

Catalysis of RNA cleavage by the Tetrahymena thermophila ribozyme. 1. Kinetic description of the reaction of an RNA substrate complementary to the active site

A ribozyme derived from the intervening sequence (IVS) of the Tetrahymena preribosomal RNA catalyzes a site-specific endonuclease reaction: G2CCCUCUA5 + G in equilibrium with G2CCCUCU + GA5 (G = guanosine). This reaction is analogous to the first step in self-splicing of the pre-rRNA, with the product G2CCCUCU analogous to the 5'-exon. The following mechanistic conclusions have been derived from pre-steady-state and steady-state kinetic measurements at 50 degrees C and neutral pH in the presence of 10 mM Mg2+. The value of kcat/Km = 9 x 10(7) M-1 min-1 for the oligonucleotide substrate with saturating G represents rate-limiting binding. This rate constant for binding is of the order expected for formation of a RNA.RNA duplex between oligonucleotides. (Phylogenetic and mutational analyses have shown that this substrate is recognized by base pairing to a complementary sequence within the IVS). The value of kcat = 0.1 min-1 represents rate-limiting dissociation of the 5'-exon analogue, G2CCCUCU. The product GA5 dissociates first from the ribozyme because of this slow off-rate for G2CCCUCU. The similar binding of the product, G2CCCUCU, and the substrate, G2CCCUCUA5, to the 5'-exon binding site of the ribozyme, with Kd = 1-2 nM, shows that the pA5 portion of the substrate makes no net contribution to binding. Both the substrate and product bind approximately 10(4)-fold (6 kcal/mol) stronger than expected from base pairing with the 5'-exon binding site. Thus, tertiary interactions are involved in binding. Binding of G2CCCUCU and binding of G are independent. These and other data suggest that binding of the oligonucleotide substrate, G2CCCUCUA5, and binding of G are essentially random and independent. The rate constant for reaction of the ternary complex is calculated to be kc approximately equal to 350 min-1, a rate constant that is not reflected in the steady-state rate parameters with saturating G. The simplest interpretation is adopted, in which kc represents the rate of the chemical step. A site-specific endonuclease reaction catalyzed by the Tetrahymena ribozyme in the absence of G was observed; the rate of the chemical step with solvent replacing guanosine, kc(-G) = 0.7 min-1, is approximately 500-fold slower than that with saturating guanosine. The value of kcat/Km = 6 x 10(7) M-1 min-1 for this hydrolysis reaction is only slightly smaller than that with saturating guanosine, because the binding of the oligonucleotide substrate is predominantly rate-limiting in both cases.(ABSTRACT TRUNCATED AT 400 WORDS)     

Domains 2 and 3 interact to form critical elements of the group II intron active site

Group II introns are self-splicing RNA molecules that also behave as mobile genetic elements. The secondary structure of group II intron RNAs is typically described as a series of six domains that project from a central wheel. Most structural and mechanistic analyses of the intron have focused on domains 1 and 5, which contain the residues essential for catalysis, and on domain 6, which contains the branch-point adenosine. Domains 2 and 3 (D2, D3) have been shown to make important contributions to intronic activity; however, information about their function is quite limited. To elucidate the role of D2 and D3 in group II ribozyme catalysis, we built a series of multi-piece ribozyme constructs based on the ai5gamma group II intron. These constructs are designed to shed light on the roles of D2 and D3 in some of the major reactions catalyzed by the intron: 5'-exon cleavage, branching, and substrate hydrolysis. Reactions with these constructs demonstrate that D3 stimulates the chemical rate constant of group II intron reactions, and that it behaves as a form of catalytic effector. However, D3 is unable to associate independently with the ribozyme core. Docking of D3 is mediated by a short duplex that is found at the base of D2. In addition to recruiting D3 into the core, the D2 stem directs the folding of the adjacent j(2/3) linker, which is among the most conserved elements in the group II intron active site. In turn, the D2 stem contributes to 5'-splice site docking and ribozyme conformational change. Nucleotide analog interference mapping suggests an interaction between the D2 stem and D3 that builds on the known theta-theta' interaction and extends it into D3. These results establish that D3 and the base of D2 are key elements of the group II intron core and they suggest a hierarchy for active-site assembly.     

Structure of the Tetrahymena ribozyme: base triple sandwich and metal ion at the active site

The Tetrahymena intron is an RNA catalyst, or ribozyme. As part of its self-splicing reaction, this ribozyme catalyzes phosphoryl transfer between guanosine and a substrate RNA strand. Here we report the refined crystal structure of an active Tetrahymena ribozyme in the absence of its RNA substrate at 3.8 A resolution. The 3'-terminal guanosine (omegaG), which serves as the attacking group for RNA cleavage, forms a coplanar base triple with the G264-C311 base pair, and this base triple is sandwiched by three other base triples. In addition, a metal ion is present in the active site, contacting or positioned close to the ribose of the omegaG and five phosphates. All of these phosphates have been shown to be important for catalysis. Therefore, we provide a picture of how the ribozyme active site positions both a catalytic metal ion and the nucleophilic guanosine for catalysis prior to binding its RNA substrate.     

Unexpected metal ion requirements specific for catalysis of the branching reaction in a group II intron

The splicing process catalyzed by group II intron ribozymes follows the same two-step pathway as nuclear pre-mRNA splicing. In vivo, the first splicing step of wild-type introns is a transesterification reaction giving rise to a branched lariat intron-3'-exon intermediate characteristic of this splicing mode. In the wild-type introns, the ribozyme core and the substrate intron-exon junctions are carried by the same precursor molecule, making it difficult to distinguish between RNA folding and catalysis under normal splicing reactions. To characterize the catalytic step of the first transesterification reaction, we studied the reversal of this reaction, reverse branching. In this reverse reaction, the excised lariat intron and the substrate 5'-exon can be preincubated and folded separately, allowing the measure of the catalytic rate of the reaction. To measure the catalytic rate of the second splicing step, purified lariat intron-3'-exon intermediate molecules were preincubated and folded prior to the addition of 5'-exon. Conditions could be found where chemistry appeared rate limiting for both catalytic steps. Study of the metal ion requirements under these conditions resulted in the unexpected finding that, for the intron studied, substitution of magnesium ions by manganese ions enhanced the rate of the first transesterification reaction by two orders of magnitude but had virtually no effect on the second transesterification reaction or the 5' splice site cleavage by hydrolysis. Finally, the catalytic rates measured under optimal conditions for both splicing steps were faster by three orders of magnitude in the branching pathway than in the hydrolytic pathway.     

Mutagenesis and comparative sequence analysis of a base triple joining the two domains of group I ribozymes.

Tertiary interactions are important in the higher-order folding of catalytic RNAs. Recently, a base triple, joining the two major domains of the catalytic core, was determined in group I introns from the cyanobacterium Anabaena PCC7120 and the eukaryote Tetrahymena thermophila. This base triple involves the fifth base pair of P4 and the fifth base of the single-stranded region J8/7. We made base pair and single-nucleotide substitutions in the fifth base pair of P4, a G-C in the wild-type Anabaena intron, and tested them for self-splicing activity. The results suggest a hydrogen bonding model in which only the C of the base pair interacts directly with the fifth base of J8/7. Comparative sequence analysis was used to determine the different combinations of base triples that occur in approximately 450 natural group I introns identified to date. About 94% of the base triples analyzed are compatible with the proposed hydrogen bonding model. Disrupting this base triple in the Tetrahymena intron resulted in the disappearance of splicing intermediates (intron 3' exon and 5' exon), even though the first step of splicing was not affected. Restoration of the base triple by a compensatory mutation reverted the intermediates to wild-type levels. These results suggest that disruption of the base triple increases the rate of the second step of splicing or of a conformational change preceding the second step. Repositioning of the base triple to form a new set of interactions may be required for the second step of splicing.     

Kinetic characterization of the first step of the ribozyme-catalyzed trans excision-splicing reaction

Group I introns catalyze the self-splicing reaction, and their derived ribozymes are frequently used as model systems for the study of RNA folding and catalysis, as well as for the development of non-native catalytic reactions. Utilizing a group I intron-derived ribozyme from Pneumocystis carinii, we previously reported a non-native reaction termed trans excision-splicing (TES). In this reaction, an internal segment of RNA is excised from an RNA substrate, resulting in the covalent reattachment of the flanking regions. TES proceeds through two consecutive phosphotransesterification reactions, which are similar to the reaction steps of self-splicing. One key difference is that TES utilizes the 3'-terminal guanosine of the ribozyme as the first-step nucleophile, whereas self-splicing utilizes an exogenous guanosine. To further aid in our understanding of ribozyme reactions, a kinetic framework for the first reaction step (substrate cleavage) was established. The results demonstrate that the substrate binds to the ribozyme at a rate expected for simple helix formation. In addition, the rate constant for the first step of the TES reaction is more than one order of magnitude lower than the analogous step in self-splicing. Results also suggest that a conformational change, likely similar to that in self-splicing, exists between the two reaction steps of TES. Finally, multiple turnover is curtailed because dissociation of the cleavage product is slower than the rate of chemistry.     

Branch-point attack in group II introns is a highly reversible transesterification, providing a potential proofreading mechanism for 5'-splice site selection.

By examining the first step of group II intron splicing in the absence of the second step, we have found that there is an interplay of three distinct reactions at the 5'-splice site: branching, reverse branching, and hydrolytic cleavage. This approach has yielded the first kinetic parameters describing eukaryotic branching and establishes that group II intron catalysis can proceed on a rapid timescale. The efficient reversibility of the first step is due to increased conformational organization in the branched intermediate and it has several important mechanistic implications. Reversibility in the first step requires that the second step of splicing serve as a kinetic trap, thus driving splicing to completion and coordinating the first and second step of splicing. Facile reverse branching also provides the intron with a proofreading mechanism to control the fidelity of 5'-splice site selection and it provides a kinetic basis for the apparent mobility of group II introns.     

Probing the Tetrahymena group I ribozyme reaction in both directions

The Tetrahymena L-21 ScaI ribozyme derived from the self-splicing group I intron catalyzes a reversible reaction analogous to the first step of self-splicing: CCCUCUA (S) + [UC]G right harpoon over left harpoon CCCUCU (P) + [UC]GA. To relate our understanding of the ribozyme to the self-splicing reaction and to further the mechanistic dissection of the ribozyme reaction, we have established a quantitative kinetic and thermodynamic framework for the forward and reverse reaction of the L-21 ScaI ribozyme under identical conditions. Examination of the framework shows that binding of products is cooperative with binding enhanced 5-fold, as was observed previously for binding of the substrates. Further, binding of UCGA is 12-fold weaker than binding of the unphosphorylated UCG, analogous to the 20-fold weaker binding of phosphorylated S relative to P; the molecular interactions underlying the stronger binding of UCG were traced to the 3'-hydroxyl group of UCG. The symmetrical effects on binding of substrates and products result in the equilibrium between ribozyme-bound species, K(int), that is essentially unperturbed from the solution equilibrium, K(ext) (K(int) = [E.P.UCGA]/[E.S.UCG] = 4.6 and K(ext) = [P][UCGA]/[S][UCG] = 1.9). Last, we show that the pK(a) values of the nucleophiles in the forward and reverse reactions are >/=10. This observation suggests that metal ion activation of the nucleophile and stabilization of the leaving group can only account for a portion of the rate enhancement of this ribozyme. These and prior results suggest that the Tetrahymena group I ribozyme, analogous to protein enzymes, uses multiple catalytic strategies to achieve its large rate enhancement.     

Bidirectional effectors of a group I intron ribozyme.

The group I self-splicing introns found in many organisms are competitively inhibited by L-arginine. We have found that L-arginine acts stereoselectively on the Pc1. LSU nuclear group I intron of Pneumocystis carinii, competitively inhibiting the first (cleavage) step of the splicing reaction and stimulating the second (ligation) step. Stimulation of the second step is most clearly demonstrated in reactions whose first step is blocked after 15 min by addition of pentamidine. The guanidine moiety of arginine is required for both effects. L-Canavanine is a more potent inhibitor than L-arginine yet it fails to stimulate. L-Arginine derivatized on its carboxyl group as an amide, ester or peptide is more potent than L-arginine as a stimulator and inhibitor, with di-arginine amide and tri-arginine being the most potent effectors tested. The most potent peptides tested are 10,000 times as effective as L-arginine in inhibiting ribozyme activity, and nearly 400 times as effective as stimulators. Arginine and some of its derivatives apparently bind to site(s) on the ribozyme to alter its conformation to one more active in the second step of splicing while competing with guanosine substrate in the first step. This phenomenon indicates that ribozymes, like protein enzymes, can be inhibited or stimulated by non-substrate low molecular weight compounds, which suggests that such compounds may be developed as pharmacological agents acting on RNA targets.     

Stereochemical selectivity of group II intron splicing, reverse splicing, and hydrolysis reactions.

We have previously shown, using phosphorothioate substitutions at splice site, that both transesterification steps of group II intron self-splicing proceed, by stereochemical inversion, with an Sp but not an Rp phosphorothioate. Under alternative reaction conditions or with various intron fragments, group II introns can splice following hydrolysis at the 5' splice site and can also hydrolyze the bond between spliced exons (the spliced-exon reopening reaction). In this study, we have determined the stereochemical specificities of all of the major model hydrolytic reactions carried out by the aI5 gamma intron from Saccharomyces cerevisiae mitochondria. For all substrates containing exon 1 and most of the intron, the stereospecificity of hydrolysis is the same as for the step 1 transesterification reaction. In contrast, the spliced-exon reopening reaction proceeds with an Rp but not an Sp phosphorothioate at the scissile bond, as does true reverse splicing. Thus, by stereochemistry, this reaction appears to be related to the reverse of step 2 of self-splicing. Finally, a substrate RNA that contains the first exon and nine nucleotides of the intron, when reacted with the intron ribozyme, releases the first exon regardless of the configuration of the phosphorothioate at the 5' splice site, suggesting that this substrate can be cleaved by either the step 1 or the step 2 reaction site. Our findings clarify the relationships of these model reactions to the transesterification reactions of the intact self-splicing system and permit new studies to be interpreted more rigorously.     

A peripheral element assembles the compact core structure essential for group I intron self-splicing

The presence of non-conserved peripheral elements in all naturally occurring group I introns underline their importance in ensuring the natural intron function. Recently, we reported that some peripheral elements are conserved in group I introns of IE subgroup. Using self-splicing activity as a readout, our initial screening revealed that one such conserved peripheral elements, P2.1, is mainly required to fold the catalytically active structure of the Candida ribozyme, an IE intron. Unexpectedly, the essential function of P2.1 resides in a sequence-conserved short stem of P2.1 but not in a long-range interaction associated with the loop of P2.1 that stabilizes the ribozyme structure. The P2.1 stem is indispensable in folding the compact ribozyme core, most probably by forming a triple helical interaction with two core helices, P3 and P6. Surprisingly, although the ribozyme lacking the P2.1 stem renders a loosely folded core and the loss of self-splicing activity requires two consecutive transesterifications, the mutant ribozyme efficiently catalyzes the first transesterification reaction. These results suggest that the intron self-splicing demands much more ordered structure than does one independent transesterification, highlighting that the universally present peripheral elements achieve their functional importance by enabling the highly ordered structure through diverse tertiary interactions.     

Metal ion catalysis during the exon-ligation step of nuclear pre-mRNA splicing: extending the parallels between the spliceosome and group II introns

Mechanistic analyses of nuclear pre-mRNA splicing by the spliceosome and group II intron self-splicing provide insight into both the catalytic strategies of splicing and the evolutionary relationships between the different splicing systems. We previously showed that 3'-sulfur substitution at the 3' splice site of a nuclear pre-mRNA has no effect on splicing. We now report that 3'-sulfur substitution at the 3' splice site of a nuclear pre-mRNA causes a switch in metal specificity when the second step of splicing is monitored using a bimolecular exon-ligation assay. This suggests that the spliceosome uses a catalytic metal ion to stabilize the 3'-oxyanion leaving group during the second step of splicing, as shown previously for the first step. The lack of a metal-specificity switch under cis splicing conditions indicates that a rate-limiting conformational change between the two steps of splicing may mask the subsequent chemical step and the metal-specificity switch. As the group II intron, a true ribozyme, uses identical catalytic strategies for splicing, our results strengthen the argument that the spliceosome is an RNA catalyst that shares a common molecular ancestor with group II introns.     

Investigation of the proposed interdomain ribose zipper in hairpin ribozyme cleavage using 2'-modified nucleosides

The hairpin ribozyme achieves catalytic cleavage through interaction of essential nucleotides located in two distinct helical domains that include internal loops. Initial docking of the two domains is ion dependent and appears to be followed by a structural rearrangement that allows the ribozyme to achieve a catalytically active state that can undergo cleavage. The proposed structural rearrangement may also be ion dependent and is now of increased importance due to recent evidence that docking is not rate limiting and that metal ions are unlikely to be involved in the chemical cleavage step. An initial structural model of the docked hairpin ribozyme included a proposal for a ribose zipper motif that involves two pairs of hydroxyl groups at A(10) and G(11) in domain A pairing with C(25) and A(24) in domain B, respectively. We have used a chemical functional group substitution technique to study whether this proposed ribose zipper is likely to be present in the active, conformationally rearranged ribozyme that is fit for cleavage. We have chemically synthesized a series of individually modified hairpin ribozymes containing 2'-analogues of nucleosides, that include 2'-deoxy and 2'-deoxy-2'-fluoro at each of the four nucleoside positions, 2'-amino-2'-deoxy, 2'-deoxy-2'-thio, and 2'-arabino at position C(25), and 2'-oxyamino at position A(10), as well as some double substitutions, and we studied their cleavage rates under both single- and multiple-turnover conditions. We conclude that at least some of the hydrogen-bonding interactions in the ribose zipper motif, either as originally proposed or in a recently suggested structural variation, are unlikely to be present in the active rearranged form of the ribozyme that undergoes cleavage. Instead, we provide strong evidence for a very precise conformational positioning for the residue C(25) in the active hairpin. A precise conformational requirement would be expected for C(25) if it rearranges to form a base-triple with A(9) and the essential residue neighboring the cleavage site G(+1), as recently proposed by another laboratory. Our results provide further support for conformational rearrangement as an important step in hairpin ribozyme cleavage.     

Molecular recognition in a trans excision-splicing ribozyme: non-Watson-Crick base pairs at the 5' splice site and omegaG at the 3' splice site can play a role in determining the binding register of reaction substrates

Trans excision-splicing (TES) ribozymes, derived from a Pneumocystis carinii group I intron, can catalyze the excision of targeted sequences from within RNAs. In this report, the sequence requirements of the splice sites are analyzed. These conserved sequences include a u-G wobble pair at the 5' splice site and a guanosine in the omega position at the 3' splice site (in the substrate). We report that 7 out of 16 base pair combinations at the 5' splice site produce appreciable TES product. This promiscuity is in contrast to results reported for analogous self-splicing reactions using a Tetrahymena ribozyme. At long reaction times TES products dissociate and rebind free ribozyme, at which point product degradation occurs via the 5' cleavage reaction. Unexpectedly, only in cases where Watson-Crick base pairs form at the 5'splice site do we see degradation of TES products at cryptic sites, suggesting that non-Watson-Crick base pairs at the 5' splice site are acting in concert with other factors to precisely determine the binding register of TES reaction substrates within the ribozyme. Moreover, cryptic site degradation does not occur with the corresponding reaction substrates, which additionally contain omegaG, suggesting that omegaG can play a similar role. We report that omegaG cannot be replaced by any other base, so TES substrates require a guanosine as the last (or only) base to be excised. Additionally, we demonstrate that P9.0 and P10 are expendable for TES reactions, suggesting that omegaG is sufficient as a 3' molecular recognition element.     

Investigation of adenosine base ionization in the hairpin ribozyme by nucleotide analog interference mapping.

Tertiary structure in globular RNA folds can create local environments that lead to pKa perturbation of specific nucleotide functional groups. To assess the prevalence of functionally relevant adenosine-specific pKa perturbation in RNA structure, we have altered the nucleotide analog interference mapping (NAIM) approach to include a series of a phosphorothioate-tagged adenosine analogs with shifted N1 pKa values. We have used these analogs to analyze the hairpin ribozyme, a small self-cleaving/ligating RNA catalyst that is proposed to employ a general acid-base reaction mechanism. A single adenosine (A10) within the ribozyme active site displayed an interference pattern consistent with a functionally significant base ionization. The exocyclic amino group of a second adenosine (A38) contributes substantially to hairpin catalysis, but ionization of the nucleotide does not appear to be important for activity. Within the hairpin ribozyme crystal structure, A10 and A38 line opposite edges of a solvent-excluded cavity adjacent to the 5'-OH nucleophile. The results are inconsistent with the model of ribozyme chemistry in which A38 acts as a general acid-base catalyst, and suggest that the hairpin ribozyme uses an alternative mechanism to achieve catalytic rate enhancement that utilizes functional groups within a solvent-excluded cleft in the ribozyme active site.     

Mutations at the lariat acceptor site allow self-splicing of a group II intron without lariat formation.

The fifth intron in the gene for cytochrome c oxidase subunit I in yeast mitochondrial DNA is of the group II type and is capable of self-splicing in vitro. The reaction results in lariat formation, concomitant with exon-exon ligation and does not require a guanosine nucleotide for its initiation. It is generally assumed, but not formally proven, that the first step in splicing is a nucleophilic attack of the 2'-hydroxyl of the branchpoint nucleotide (A) on the 5'-exon-intron junction. To investigate the role of intron sequences in recognition of the 5'-splice junction and the ensuing event of cleavage and lariat formation, mutations have been introduced at and around the branchsite. Results obtained show that although branchpoint attack and subsequent lariat formation are strongly preferred events under conditions normally used for self-splicing, addition of a single T residue at intron position 856, a mutation which brings the branchpoint adenosine into a basepair, leads to a conditionally active intron, which at high ionic strength catalyses exon-exon ligation in the absence of lariat formation. Comparable behaviour is also observed with the branchpoint A deletion mutant. The implications of these findings for the mechanism of self-splicing of group II introns are discussed.