Biosorption of Cu(II) and Pb(II) ions from aqueous solution by natural spider silk

Aside from its excellent mechanical properties, spider silk (SS) would offer an active surface for heavy metal interaction due to its rich protein structure. The present study describes the potential use of natural (SS) as a sorbent of heavy metals from aqueous solutions. Single and multi-species biosorption experiments of heavy metals by natural SS were conducted using batch and column experiments. The biosorption kinetics, in general, was found to follow the second-order rate expression, and the experimental equilibrium biosorption data fitted reasonably well to Freundlich isotherm. From the Freundlich isotherm, the biosorption capacities of Cu(II) and Pb(II) ions onto SS were found as 0.20 and 0.007 mmol g?1, respectively. The results showed a decrease in the extent of metal ion uptake with lowering the pH.     

Modeling and optimization of granulation process of activated sludge in sequencing batch reactors

Aerobic granulation is a promising process for wastewater treatment, but this granulation process is very complicated and is affected by many factors. Thus, a mathematical model to quantitatively describe such a granulation process is highly desired. In this work, by taking into account all of key steps including biomass growth, increase in particle size and density, detachment, breakage and sedimentation, an one‐dimensional mathematic model was developed to simulate the granulation process of activated sludge in a sequencing batch reactor (SBR). Discretization methodology was applied by dividing operational time, sedimentation process, size fractions and slices into discretized calculation elements. Model verification and prediction for aerobic granulation process were conducted under four different conditions. Four parameters indicative of granulation progression, including mean radius, biomass discharge ratio, total number, and bioparticle size distribution, were predicted well with the model. An optimum controlling strategy, automatically adjusted of settling time, was also proposed based on this model. Moreover, aerobic granules with a density higher than 120 g VSS/L and radius in a range of 0.4–1.0 mm were predicted to have both high settling velocity and substrate utilization rate, and the corresponding optimum operating conditions were be determined. Experimental results demonstrate that the developed model is appropriate for simulating the formation of aerobic granules in SBRs. These results are useful for designing and optimizing the cultivation and operation of aerobic granule process. Biotechnol. Bioeng. 2013; 110: 1312–1322. © 2012 Wiley Periodicals, Inc.     

Influence of 2,4-dinitrophenol on the characteristics of activated sludge in batch reactors

The response of activated sludge characteristics to the presence of 2,4-dinitrophenol (dNP) in batch cultures was investigated in this study. The sludge yield slightly decreased with an increase in dNP concentration. At 10 mg l(-1), or lower, dNP significantly reduced sludge yield and relative specific growth rates (mu/mu0), but didn't substantially affect its relative specific chemical oxygen demand removal rate (q/q0). Presence of dNP at 1-20 mg l(-1) increased the specific oxygen uptake rate of activated sludge, and slightly changed its hydrophobicity. An analysis on inhibition indicated that the reduction in sludge yield in the presence of dNP was mainly attributed to the significant decreased sludge growth, rather than the reduced substrate degradation.     

Biosorption characteristics of Aspergillus flavus biomass for removal of Pb(II) and Cu(II) ions from an aqueous solution

The Pb(II) and Cu(II) biosorption characteristics of Aspergillus flavus fungal biomass were examined as a function of initial pH, contact time and initial metal ion concentration. Heat inactivated (killed) biomass was used in the determination of optimum conditions before investigating the performance of pretreated biosorbent. The maximum biosorption values were found to be 13.46 +/- 0.99 mg/g for Pb(II) and 10.82 +/- 1.46 mg/g for Cu(II) at pH 5.0 +/- 0.1 with an equilibrium time of 2 h. Detergent, sodium hydroxide and dimethyl sulfoxide pretreatments enhanced the biosorption capacity of biomass in comparison with the heat inactivated biomass. The biosorption data obtained under the optimum conditions were well described by the Freundlich isotherm model. Competitive biosorption of Pb(II) and Cu(II) ions was also investigated to determine the selectivity of the biomass. The results indicated that A. flavus is a suitable biosorbent for the removal of Pb(II) and Cu(II) ions from aqueous solution.     

Molecular identification of the microbial diversity in two sequencing batch reactors with activated sludge

The diversity of the microbial community was identified in two lab-scale, ideally mixed sequencing batch reactors which were run for 115 days. One of the reactors was intermittently aerated (2 h aerobically/2 h anaerobically) whereas the other was consistently aerated. The amount of biomass as dry matter, the degradation of organic carbon determined by chemical oxygen demand and nitrogen-degradation activity were followed over the operation of the two reactors and did not show significant differences between the two approaches at the end of the experiment. At this point, the composition of the microbial community was determined by a terminal restriction fragment length polymorphism approach using multiple restriction enzymes by which organisms were retrieved to the lowest taxonomic level. The microbial composition was then significantly different. The species richness was at least five-fold higher in the intermittently aerated reactor than in the permanently kept aerobic approach which is in line with the observation that ecosystem disturbances result in higher diversity.     

Effects of long-term addition of Cu(II) and Ni(II) on the biochemical properties of aerobic granules in sequencing batch reactors

Copper (Cu(II)) and nickel (Ni(II)) are often encountered in wastewaters. This study investigated the individual toxic effects of long-term addition of Cu(II) and Ni(II) on the biochemical properties of aerobic granules in sequencing batch reactors (SBRs). The biochemical properties of aerobic granules were characterized by extracellular polymeric substances (EPS) content, dehydrogenase activity, microbial community biodiversity, and SBR performance. One SBR was used as a control system, while another two received respective concentration of Cu(II) and Ni(II) equal to 5 mg/L initially and increased to 15 mg/L on day 27. Results showed that the addition of Cu(II) drastically reduced the biomass concentration, bioactivity, and biodiversity of aerobic granules, and certainly deteriorated the treatment performance. The toxic effect of Ni(II) on the biodiversity of aerobic granules was milder and the aerobic granular system elevated the level of Ni(II) toxicity tolerance. Even at a concentration of 15 mg/L, Ni(II) still stimulated the biomass yield and bioactivity of aerobic granules to some extent. The elevated tolerance seemed to be owed to the concentration gradient developed within granules, increased biomass concentration, and promoted EPS production in aerobic granular systems.     

Nitrification in activated sludge batch reactors is linked to protozoan grazing of the bacterial population

Protozoa feed upon free-swimming bacteria and suspended particles inducing flocculation and increasing the turnover rate of nutrients in complex mixed communities. In this study, the effect of protozoan grazing on nitrification was examined in activated sludge in batch cultures maintained over a 14-day period. A reduction in the protozoan grazing pressure was accomplished by using either a dilution series or the protozoan inhibitor cycloheximide. As the dilutions increased, the nitrification rate showed a decline, suggesting that a reduction in protozoan or bacterial concentration may cause a decrease in nitrification potential. In the presence of cycloheximide, where the bacterial concentration was not altered, the rates of production of ammonia, nitrite, and nitrate all were significantly lower in the absence of active protozoans. These results suggest that a reduction in the number or activity of the protozoans reduces nitrification, possibly by limiting the availability of nutrients for slow-growing ammonia and nitrite oxidizers through excretion products. Furthermore, the ability of protozoans to groom the heterotrophic bacterial population in such systems may also play a role in reducing interspecies competition for nitrification substrates and thereby augment nitrification rates.     

Adsorption of Cu(II) and Pb(II) onto diethylenetriamine-bacterial cellulose

Diethylenetriamine-bacterial cellulose (EABC) was synthesized by amination with diethylenetriamine on bacterial cellulose (BC). Its adsorption properties for Cu(II) and Pb(II) were investigated. The parameters affecting the metal ions adsorption, such as contact time, solution pH, and initial metal ions concentration have been investigated. The adsorption kinetics and adsorption isotherms were further studied. The results show that the adsorption rate could be well fitted by pseudo-second-order rate model, and adsorption isotherm could be described by the Langmuir model. The regeneration of EABC was also studied. This study provides the relatively comprehensive data for the EABC application to the removal of metal ion in the wastewater.     

Biosorption of Pb(II) and Cr(III) from aqueous solution by lichen (Parmelina tiliaceae) biomass

The biosorption characteristics of Pb(II) and Cr(III) ions from aqueous solution using the lichen (Parmelina tiliaceae) biomass were investigated. Optimum biosorption conditions were determined as a function of pH, biomass dosage, contact time, and temperature. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherm of the metal ions by P. tiliaceae biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The monolayer biosorption capacity of P. tiliaceae biomass for Pb(II) and Cr(III) ions was found to be 75.8 mg/g and 52.1mg/g, respectively. From the D-R isotherm model, the mean free energy was calculated as 12.7 kJ/mol for Pb(II) biosorption and 10.5 kJ/mol for Cr(III) biosorption, indicating that the biosorption of both metal ions was taken place by chemical ion-exchange. The calculated thermodynamic parameters (delta G degrees , delta H degrees and delta S degrees ) showed that the biosorption of Pb(II) and Cr(III) ions onto P. tiliaceae biomass was feasible, spontaneous and exothermic under examined conditions. Experimental data were also tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of both metal ions followed well pseudo-second-order kinetics.     

Reduction in excess sludge production by addition of chemical uncouplers in activated sludge batch cultures

AIMS: To investigate the possibility of reducing excess sludge production in activated sludge processes by the addition of chemical uncouplers to greatly dissociate anabolism from catabolism. METHODS AND RESULTS: Ortho-chlorophenol (oCP), 2,4-dichlorophenol (DCP), 3,3',4',5-tetrachlorosalicylanilide (TCS), para-dinitrophenol (pNP) and 2,4-dinitrophenol (DNP) were chosen for short-term tests for their ability to reduce sludge yield by shaking bottle test. The most effective chemicals, DNP and pNP, together with TCS were tested for various uncoupler concentrations and biomass concentrations. TCS was tested in a lab-scale completely mixed activated sludge batch culture. The model (demonstrated by Liu) was verified with experimental data in completely mixed activated sludge batch test, but was inconsistent with the results from the shaking bottle batch test. The observed growth yield (Yobs) decreased with increasing of the ratio of initial uncoupler concentration to initial biomass concentration (Cu/X0). CONCLUSIONS: We suggest that the uncouplers oCP, DCP, TCS, pNP and DNP can cause a significant decrease in sludge production, the metabolism of which can explain the decline in sludge yield. SIGNIFICANCE AND IMPACT OF THE STUDY: The real strength of chemical uncoupler imposing on biomass should be Cu/X0, not initial uncoupler concentration (Cu) alone. Chemical uncouplers can be used to develop the activated sludge processes for minimizing excess sludge production.     

Kinetic,thermodynamic, and equilibrium biosorption of Pb(II), Cu(II), and Ni(II) using dead mushroom biomass under batch experiment

In this study, a low-cost biosorbent, dead mushroom biomass (DMB) granules, was used for investigating the optimum conditions of Pb(II), Cu(II), and Ni(II) biosorption from aqueous solutions. Various physicochemical parameters, such as initial metal ion concentration, equilibrium time, pH value, agitation speed, particles diameter, and adsorbent dosage, were studied. Five mathematical models describing the biosorption equilibrium and isotherm constants were tested to find the maximum uptake capacities: Langmuir, Freundlich, Redlich-Peterson, Sips, and Khan models. The best fit to the Pb(II) and Ni(II) biosorption results was obtained by Langmuir model with maximum uptake capacities of 44.67 and 29.17 mg/g for these two ions, respectively, whereas for Cu(II), the corresponding value was 31.65 mg/g obtained with Khan model. The kinetic study demonstrated that the optimum agitation speed was 400 rpm, at which the best removal efficiency and/or minimum surface mass transfer resistance (MSMTR) was achieved. A pseudo-second-order rate kinetic model gave the best fit to the experimental data (R² = 0.99), resulting in MSMTR values of 4.69× 10^?5, 4.45× 10^?6, and 1.12× 10^?6 m/s for Pb(II), Cu(II), and Ni(II), respectively. The thermodynamic study showed that the biosorption process was spontaneous and exothermic in nature.     

Biosorption of reactive dyes by dried activated sludge: equilibrium and kinetic modelling

The biosorption of reactive dyes (Reactive Blue 2 - RB2 and Reactive Yellow 2 - RY2) onto dried activated sludge was investigated. The dye binding capacity of biosorbent was shown as a function of initial pH, initial dye concentration and type of dye. The equilibrium data fitted very well to both the Freundlich and Langmuir adsorption models. The results showed that both the dyes uptake processes followed the second-order rate expression.     

Removal of Cu(II) ions by biosorption onto powdered waste sludge (PWS) prior to biological treatment in an activated sludge unit: A statistical design approach

Biological treatment of synthetic wastewater containing Cu(II) ions was realized in an activated sludge unit with pre-adsorption of Cu(II) onto powdered waste sludge (PWS). Box-Behnken experimental design method was used to investigate Cu(II), chemical oxygen demand (COD) and toxicity removal performance of the activated sludge unit under different operating conditions. The independent variables were the solids retention time (SRT, 5–30 d), hydraulic residence time (HRT, 5–25 h), feed Cu(II) concentration (0–50 mg L^?1) and PWS loading rate (0–4 g h^?1) while percent Cu(II), COD, toxicity (TOX) removals and the sludge volume index (SVI) were the objective functions. The data were correlated with a quadratic response function (R² = 0.99). Cu(II), COD and toxicity removals increased with increasing PWS loading rate and SRT while decreasing with the increasing feed Cu(II) concentration and HRT. Optimum conditions resulting in maximum Cu(II), COD, toxicity removals and SVI values were found to be SRT of 30 d, HRT 15 h, PWS loading rate 3 g h^?1 and feed Cu(II) concentration of less than 30 mg L^?1.     

Wine vinasses treatments by ozone and an activated sludge system in continuous reactors

In this work wine vinasses have been treated separately by means of a chemical ozonation and a biological aerobic degradation in an activated sludge system, and later by means of a combined process which consisted of an aerobic pretreatment followed by an ozonation treatment, in continuous reactors in all cases. In the ozonation experiments, the hydraulic retention time and the ozone partial pressure were varied leading to substrate removals in the range 4.4-16%, with increases in this removal when both operating variables were increased. A kinetic study, which combines mixed flow reactor model for the liquid phase and plug flow reactor model for the gas phase, allows to determine the rate constant for the ozone reaction and the consumption ratio, which are k_O3 = 3.6 l/(g COD · h) and b = 22.5 g COD degraded/mol O₃ consumed. The aerobic degradation experiments were conducted in the activated sludge system with variations in the retention time and influent organic substrate concentration in the wastewater. A modified Contois model applied to the experimental results leads to the determination of the kinetic parameters of that model: K₁ = 5.43 l/g VSS and q_max = 6.29 g COD/(g VSS · h). Finally, the combined process reveals an improvement in the efficiency of the ozonation stage due to the previous aerobic treatment with increases in the substrate removal reached and in the rate constant obtained, the last one being k_O3 = 5.6 l/(g COD · h).     

Characterization of Aqueous Pb(II) and Cd(II) Biosorption on Native and Chemically Modified Alstonia macrophylla Saw Dust

This study was conducted in order to understand the mechanism of Cd and Pb adsorption in aqueous solutions by raw and modified saw dust (SD) of Alstonia macrophylla. The biosorbent was characterized by Boehm titration, specific surface area, scanning electron microscopy (SEM), X-ray energy dispersion (EDAX), and Fourier transform infrared (FTIR) analyses. SD was treated using organic acids and bases. Batch studies were conducted for raw and modified SD to determine the effect of initial concentration, pH, ionic strength, and contact time on metal adsorption. The specific surface area and total basic and acidic groups of SD were 77 m²/g and 1521 and 2312 μmol/g, respectively. The adsorption of both metals onto SD was pH dependent. No ionic strength dependency was observed in adsorption of Cd and Pb at pH >6, indicating inner sphere surface complexation. Monolayer adsorption is dominant in both metal sorptions by SD. Furthermore, there is no competition between metals on adsorption and raw SD was found to be suitable for removal of Cd and Pb as compared to organic acid– or base-treated SD. Maximum adsorption capacity of SD for Cd and Pb were 30.6 and 204.2 mg/g, respectively. Results indicate that the A. macrophylla SD can be considered as a potential material for metal ion removal from wastewater.     

Effect of solids retention time and temperature on waste activated sludge hydrolysis and short-chain fatty acids accumulation under alkaline conditions in continuous-flow reactors

The effects of solids retention time (SRT) and temperature on waste activated sludge (WAS) hydrolysis and short-chain fatty acids (SCFAs) accumulation were investigated in a series of continuous-flow reactors at pH 10. The experimental results showed that the increase of either SRT or temperature benefited the hydrolysis of WAS and the production of SCFAs. The changes in SRT gave also impact on the percentage of acetic and propionic acids in the fermentative SCFAs, but little influence on that of the slightly long-chain SCFAs, such as n-butyric, iso-butyric, n-valeric and iso-valeric acids. Compared with the control (pH unadjusted) experiment, at SRT of 12d and temperature of 20 degrees C the concentration of SCFAs produced at pH 10 increased from 261.2 to 933.5mg COD/L, and the propionic acid percentage improved from 11.7 to 16.0%. It can be concluded from this investigation that the efficient continuous production of SCFAs at pH 10 is feasible.     

Biosorption of Zn(II) by Thiobacillus ferrooxidans

There have been a number of studies considering the possibility of removing and recovering heavy metals from diluted solutions. These are due, principally, because of the commercial value of some metals as well as in the environmental impact caused by them. The traditional methods for removing have several disadvantages when metals are present in concentrations lower than 100 mg/l. Biosorption, which uses biological materials as adsorbents, has been considered as an alternative method. In this work, variables like pH and biomass chemical pretreatment have been studied for its effect on the capacity for zinc biosorption by Thiobacillus ferrooxidans. Also, studies to determinate the time for zinc adsorption were carried out. Results indicate that a capacity as high as 82.61 mg of Zn(II)/g of dry biomass can be obtained at a temperature of 25v°C and that the biosorption process occurs in a time of 30 min.     

Anammox start-up in sequencing batch biofilm reactors using different inoculating sludge

In this study, anammox bacteria were rapidly enriched in sequencing batch biofilm reactors (SBBRs) with different inoculations. The activated sludge taken from a sequencing batch reactor was used and inoculated to SBBR1, while SBBR2 was seeded with stored anaerobic sludge from an upflow anaerobic fixed bed (2-year stored at 5–15 °C). Nitrogen removal performance, anammox activity, biofilm characteristics and variation of the microbial community were evaluated. The maximum total nitrogen loading rate (NLR) of SBBR1 gradually reached to 1.62 kg?N/(m³/day) with a removal efficiency higher than 88 % and the NLR of SBBR2 reached to 1.43 kg?N/(m³/day) with a removal efficiency of 86 %. SBBR2 was more stable compared to SBBR1. These results, combined with molecular techniques such as scanning electron microscope, fluorescence in situ hybridization, and terminal restriction fragment length polymorphism, indicated that different genera of anammox bacteria became dominant. This research also demonstrates that SBBR is a promising bioreactor for starting up and enriching anammox bacteria.     

Structure and dynamics of microbial community in full-scale activated sludge reactors

Phospholipid fatty acid (PLFA) profiles in four full-scale activated sludge reactors (ASR1 ~ 4) treating municipal wastewater, South Korea, were monitored to evaluate the influence of influent water quality on microbial community structure (MCS) and the effect of the MCS on effluent water quality. In ASR1 ~ 3, PLFA profiles were very similar, regardless of the influent water quality and seasonal differences, and 16:17c/15:0iso2OH and 16:0 were dominant. PLFA profiles in ASR4 during summer and autumn were very similar to those in ASR1 ~ 3, but increases in specific fatty acids, 16:1ω5c, 11methyl18:1ω7c and 15:0iso3OH, were found in ASR4 during winter and spring, with relatively high total suspended solid (TSS) concentrations in the effluent. 16:1ω5c and 15:0iso3OH, possibly related with Flexibacter sp., caused a bulking problem in the activated sludge. The community diversity indices such as Shannon diversity and equability decreased in summer but increased in autumn in all the ASRs. Canonical correspondence analysis results suggested that the influent BOD concentration played the most important role in changing MCS, followed by influent TSS concentration. In addition, the TSS and total phosphorus concentrations in the effluent were significantly affected by the change of the MCS.