Dynamic light scattering investigations of RecA self-assembly and interactions with single strand DNA

Dynamic light scattering (DLS) measurements were performed on self-assembled solutions of RecA as a function of assembly time under strand exchange ionic strength conditions (10 mM MgCl2, 65 mM NaCl, 10 mM Tris-HCl, pH = 7.5, 1 mM DTT, 3-4 microM RecA) in the absence of ATP. These measurements yield distributions of the translational diffusion coefficients of the changing populations of assembling protein species. Interpretations of results of DLS measurements are made in terms of model hydrodynamic calculations that indicate, under the solution conditions employed, the smallest fundamental quaternary subunit of RecA is a hexamer in a toroidal or lock-washer configuration. Interactions of M13mp19 circular single strand DNA (ssDNA) with RecA assembled to different stages were also investigated. Additions of ssDNA to self-assembled solutions of RecA acts to dissociate the associated structures into hexamer subunits. However, the effect of ssDNA on assembled RecA is highly dependent on the RecA self-assembly state. The longer the assembly time, the less reversible the self-assembled structures of RecA become. Binding isotherms of titrated mixtures of ssDNA with RecA self-assembled to various stages were also determined. Evaluated dissociation constants of RecA/ssDNA complexes were found to increase with increases of the associated state of RecA. These results strongly suggest that, under the solvent conditions employed, the active ssDNA binding form of RecA is a hexamer.     

Rapid propagational interactions of slow binding inhibitor with RecA protein occur on the longer nucleoprotein filaments

RecA protein is a DNA-dependent ATPase. RecA protein-mediated ATP hydrolysis occurs throughout the filamentous nucleoprotein complexes of RecA and DNA. Nucleotide analog ATP[γS] may not act simply as a competitive inhibitor, leading to inhibition kinetic patterns that are informative. When a mixture of ATP and ATP[γS] is present at the beginning of reaction, a transient phase lasting several minutes is observed in which the system approaches the state characteristic of the new ATP/ATP[γS] ratio. This phase consists of a burst or lag in ATP hydrolysis, depending on whether ATP or ATP[γS] respectively, is added first. The transition phase reflects a slow conformational change in a RecA monomer or a general adjustment in the structure of RecA filaments. The RecA filaments formed on longer DNA cofactor were more sensitive, and respond more rapidly to ATP[γS] than on shorter DNA cofactors.     

RecA K72R filament formation defects reveal an oligomeric RecA species involved in filament extension

Using an ensemble approach, we demonstrate that an oligomeric RecA species is required for the extension phase of RecA filament formation. The RecA K72R mutant protein can bind but not hydrolyze ATP or dATP. When mixed with other RecA variants, RecA K72R causes a drop in the rate of ATP hydrolysis and has been used to study disassembly of hydrolysis-proficient RecA protein filaments. RecA K72R filaments do not form in the presence of ATP but do so when dATP is provided. We demonstrate that in the presence of ATP, RecA K72R is defective for extension of RecA filaments on DNA. This defect is partially rescued when the mutant protein is mixed with sufficient levels of wild type RecA protein. Functional extension complexes form most readily when wild type RecA is in excess of RecA K72R. Thus, RecA K72R inhibits hydrolysis-proficient RecA proteins by interacting with them in solution and preventing the extension phase of filament assembly.     

Study of the kinetics and mechanism of ATP hydrolysis by soluble ATPase of the chloroplasts (CFl) in the presence of Mg2+ ions]

A kinetic study of ATP hydrolysis by soluble ATPase of chloroplasts (CF1) was made. At low concentrations of MgCl2 a linear increase of the reaction rate was observed during the increase in the ATP concentration up to 1 mM. At high concentrations of MgCl2 the dependence was of a more complicated nature. At MgCl2 concentrations lower than 0.1 mM the reaction approached second-order kinetics with respect to Mg2+; the increase in MgCl2 concentration resulted in a decrease of the reaction order. It is assumed that MgATP is the "true" substrate and MgADP the "true" inhibitor of the reaction. A reaction mechanism of ATP hydrolysis is postulated.     

Rate and mechanism of the assembly of tropomyosin with actin filaments

The rate of assembly of tropomyosin with actin filaments was measured by stopped-flow experiments. Binding of tropomyosin to actin filaments was followed by the change of the fluorescence intensity of a (dimethylamino)naphthalene label covalently linked to tropomyosin and by synchrotron radiation X-ray solution scattering. Under the experimental conditions (2 mM MgCl2, 100 mM KCl, pH 7.5, 25 degrees C) and at the protein concentrations used (2.5-24 microM actin, 0.2-3.4 microM tropomyosin) the half-life time of assembly of tropomyosin with actin filaments was found to be less than 1 s. The results were analyzed quantitatively by a model in which tropomyosin initially binds to isolated sites. Further tropomyosin molecules bind contiguously to bound tropomyosin along the actin filaments. Good agreement between the experimental and theoretical time course of assembly was obtained by assuming a fast preequilibrium between free and isolatedly bound tropomyosin.     

An Integrative Approach to the Study of Filamentous Oligomeric Assemblies,with Application to RecA

Oligomeric macromolecules in the cell self-organize into a wide variety of geometrical motifs such as helices, rings or linear filaments. The recombinase proteins involved in homologous recombination present many such assembly motifs. Here, we examine in particular the polymorphic characteristics of RecA, the most studied member of the recombinase family, using an integrative approach that relates local modes of monomer/monomer association to the global architecture of their screw-type organization. In our approach, local modes of association are sampled via docking or Monte Carlo simulations. This enables shedding new light on fiber morphologies that may be adopted by the RecA protein. Two distinct RecA helical morphologies, the so-called “extended” and “compressed” forms, are known to play a role in homologous recombination. We investigate the variability within each form in terms of helical parameters and steric accessibility. We also address possible helical discontinuities in RecA filaments due to multiple monomer-monomer association modes. By relating local interface organization to global filament morphology, the strategies developed here to study RecA self-assembly are particularly well suited to other DNA-binding proteins and to filamentous protein assemblies in general.     

The effect of heavy chain phosphorylation and solution conditions on the assembly of Acanthamoeba myosin-II

At low ionic strength, Acanthamoeba myosin-II polymerizes into bipolar minifilaments, consisting of eight molecules, that scatter about three times as much light as monomers. With this light scattering assay, we show that the critical concentration for assembly in 50-mM KCl is less than 5 nM. Phosphorylation of the myosin heavy chain over the range of 0.7 to 3.7 P per molecule has no effect on its KCl dependent assembly properties: the structure of the filaments, the extent of assembly, and the critical concentration for assembly are the same. Sucrose at a concentration above a few percent inhibits polymerization. Millimolar concentrations of MgCl2 induce the lateral aggregation of fully formed minifilaments into thick filaments. Compared with dephosphorylated minifilaments, minifilaments of phosphorylated myosin have a lower tendency to aggregate laterally and require higher concentrations of MgCl2 for maximal light scattering. Acidic pH also induces lateral aggregation, whereas basic pH leads to depolymerization of the myosin- II minifilaments. Under polymerizing conditions, millimolar concentrations of ATP only slightly decrease the light scattering of either phosphorylated or dephosphorylated myosin-II. Barring further modulation of assembly by unknown proteins, both phosphorylated and dephosphorylated myosin-II are expected to be in the form of minifilaments under the ionic conditions existing within Acanthamoeba.     

Assembly of presynaptic filaments. Factors affecting the assembly of RecA protein onto single-stranded DNA

We have previously shown that the assembly of RecA protein onto single-stranded DNA (ssDNA) facilitated by SSB protein occurs in three steps: (1) rapid binding of SSB protein to the ssDNA; (2) nucleation of RecA protein onto this template; and (3) co-operative polymerization of additional RecA protein to yield presynaptic filaments. Here, electron microscopy has been used to further explore the parameters of this assembly process. The optimal extent of presynaptic filament formation required at least one RecA protein monomer per three nucleotides, high concentrations of ATP (greater than 3 mM in the presence of 12 mM-Mg2+), and relatively low concentrations of SSB protein (1 monomer per 18 nucleotides). Assembly was depressed threefold when SSB protein was added to one monomer per nine nucleotides. These effects appeared to be exerted at the nucleation step. Following nucleation, RecA protein assembled onto ssDNA at net rates that varied from 250 to 900 RecA protein monomers per minute, with the rate inversely related to the concentration of SSB protein. Combined sucrose sedimentation and electron microscope analysis established that SSB protein was displaced from the ssDNA during RecA protein assembly.     

The simultaneous binding of two double-stranded DNA molecules by Escherichia coli RecA protein

We have characterized the double-stranded DNA (dsDNA) binding properties of RecA protein, using an assay based on changes in the fluorescence of 4',6-diamidino-2-phenylindole (DAPI)-dsDNA complexes. Here we use fluorescence, nitrocellulose filter-binding, and DNase I-sensitivity assays to demonstrate the binding of two duplex DNA molecules by the RecA protein filament. We previously established that the binding stoichiometry for the RecA protein-dsDNA complex is three base-pairs per RecA protein monomer, in the presence of ATP. In the presence of ATPgammaS, however, the binding stoichiometry depends on the MgCl2 concentration. The stoichiometry is 3 bp per monomer at low MgCl2 concentrations, but changes to 6 bp per monomer at higher MgCl2 concentrations, with the transition occurring at approximately 5 mM MgCl2. Above this MgCl2 concentration, the dsDNA within the RecA nucleoprotein complex becomes uncharacteristically sensitive to DNase I digestion. For these reasons we suggest that, at the elevated MgCl2 conditions, the RecA-dsDNA nucleoprotein filament can bind a second equivalent of dsDNA. These results demonstrate that RecA protein has the capacity to bind two dsDNA molecules, and they suggest that RecA or RecA-like proteins may effect homologous recognition between intact DNA duplexes.     

Dual-wavelength stopped-flow analysis of the lateral and longitudinal assembly kinetics of vimentin

Vimentin is a highly charged intermediate filament protein that inherently forms extended dimeric coiled coils, which serve as the basic building blocks of intermediate filaments. Under low ionic strength conditions, vimentin filaments dissociate into uniform tetrameric complexes of two anti-parallel-oriented, half-staggered coiled-coil dimers. By addition of salt, vimentin tetramers spontaneously reassemble into filaments in a time-dependent process: 1) lateral assembly of tetramers into unit-length filaments, 2) longitudinal annealing of unit-length filaments, and 3) longitudinal assembly of filaments coupled with subsequent radial compaction. To independently determine the lateral and longitudinal assembly kinetics, we measure with a stopped-flow instrument the static light scattering signal at two different wavelengths (405 and 594 nm) with a temporal resolution of 3 ms and analyze the signals based on Rayleigh-Gans theory. This theory considers that the intensity of the scattered light depends not only on the molecular weight of the scattering object but also on its shape. This shape dependence is more pronounced at shorter wavelengths, allowing us to decompose the scattered light signal into its components arising from lateral and longitudinal filament assembly. We demonstrate that both the lateral and longitudinal filament assembly kinetics increase with salt concentration.     

The direction of RecA protein assembly onto single strand DNA is the same as the direction of strand assimilation during strand exchange

The RecA protein of Escherichia coli optimally promotes DNA strand exchange reactions in the presence of the single strand DNA-binding protein of E. coli (SSB protein). Under these conditions, assembly of RecA protein onto single-stranded DNA (ssDNA) occurs in three steps. First, the ssDNA is rapidly covered by SSB protein. The binding of RecA protein is then initiated by nucleation of a short tract of RecA protein onto the ssDNA. Finally, cooperative polymerization of additional RecA protein accompanied by displacement of SSB protein results in a ssDNA-RecA protein filament (Griffith, J. D., Harris, L. D., and Register, J. C. (1984) Cold Spring Harbor Symp. Quant. Biol. 49, 553-559). We report here that RecA protein assembly onto circular ssDNA yields RecA protein-covered circles in which greater than 85% are completely covered by RecA protein with no remaining SSB protein-covered segments (as detected by electron microscopy). However, when linear ssDNA is used, 90% of the filaments contain a short segment at one end complexed with SSB protein. This suggests that RecA protein assembly is unidirectional. Visualization of the assembly of RecA protein onto either long ssDNA tails (containing either 5' or 3' termini) or ssDNA gaps generated in double strand DNA allowed us to determine that the RecA protein polymerizes in the 5' to 3' direction on ssDNA and preferentially nucleates at ssDNA-double strand DNA junctions containing 5' termini.     

The RecF protein antagonizes RecX function via direct interaction

The RecX protein inhibits RecA filament extension, leading to net filament disassembly. The RecF protein physically interacts with the RecX protein and protects RecA from the inhibitory effects of RecX. In vitro, efficient RecA filament formation onto single-stranded DNA binding protein (SSB)-coated circular single-stranded DNA (ssDNA) in the presence of RecX occurs only when all of the RecFOR proteins are present. The RecOR proteins contribute only to RecA filament nucleation onto SSB-coated single-stranded DNA and are unable to counter the inhibitory effects of RecX on RecA filaments. RecF protein uniquely supports substantial RecA filament extension in the presence of RecX. In vivo, RecF protein counters a RecX-mediated inhibition of plasmid recombination. Thus, a significant positive contribution of RecF to RecA filament assembly is to antagonize the effects of the negative modulator RecX, specifically during the extension phase.     

Intersubunit electrostatic complementarity in the RecA nucleoprotein filament regulates nucleotide substrate specificity and conformational activation

The Escherichia coli RecA protein is the prototypical member of a family of molecular motors that transduces ATP binding and hydrolysis for mechanical function. While many general mechanistic features of RecA action are known, specific structural and functional insights into the molecular basis of RecA activation remain elusive. Toward a more complete understanding of the interdependence between ATP and DNA binding by RecA, we report the characterization of a mutant RecA protein wherein the aspartate residue at position 100 within the ATP binding site is replaced by arginine. Physiologically, D100R RecA was characterized by an inducible, albeit reduced, activation of the SOS response and a diminished ability to promote cellular survival after UV irradiation. Biochemically, the D100R substitution caused a surprisingly modest perturbation of RecA-ATP interactions and an unexpected and significant decrease in the affinity of RecA for ssDNA. Moreover, in vitro assays of RecA activities requiring the coordinated processing of ATP and DNA revealed (1) a 2-5-fold decrease in steady-state turnover of ATP; (2) no formation of mixed nucleoprotein filaments when wild-type and D100R RecA compete for limiting ssDNA; and (3) no formation of strand exchange reaction products. Taken together, these results suggest that the D100R mutational effects on isolated RecA activities combine synergistically to perturb its higher-order functions. We conclude that the replacement of Asp100 resulted in a change in the electrostatic complementarity between RecA monomers during active filament assembly that prevents the protein from fully accessing the active multimeric state.     

Changing of filamentation dynamics of RecA protein, induced by D112R amino acid substitution or ATP to dATP replacement, results in filament steadiness TO THE RecX protein action

It is known that RecX is a negative regulator of RecA protein. We found that the mutant RecA D112R protein exhibits increased resistance to RecX protein comparatively to wild-type RecA protein in vitro and in vivo. Using molecular modeling we showed, that amino acid located in position 112 can not approach RecX closer than 25-28 angstroms. Thus, direct contact between amino acid and RecX is impossible. RecA D112R protein more actively competes with SSB protein for the binding sites on ssDNA and, therefore, differs from the wild-type RecA protein by dynamics of filamentation on ssDNA. On the other hand, after the replacement of ATP by dATP, the wild-type RecA protein, changing the dynamics of filamentation on ssDNA, also becomes more resistant to RecX. Based on these data it is concluded that the dynamics of filamentation has a great, if not dominant role in the stability of RecA filament to RecX relative to the role of RecA-RecX protein-protein interactions discussed earlier. We also propose an improved model of regulation of RecA by RecX protein, where RecA filament elongation along ssDNA is blocked by RecX protein on the ssDNA region, located outside the filament.     

The DinI and RecX proteins are competing modulators of RecA function

The DinI and RecX proteins of Escherichia coli both modulate the function of RecA protein, but have very different effects. DinI protein stabilizes RecA filaments, preventing disassembly but permitting assembly. RecX protein blocks RecA filament extension, which can lead to net filament disassembly. We demonstrate that both proteins can interact with the RecA filament, and propose that each can replace the other. The DinI/RecX displacement reactions are slow, requiring multiple minutes even when a large excess of the challenging protein is present. The effects of RecX protein on RecA filaments are manifest at lower modulator concentrations than the effects of DinI protein. Together, the DinI and RecX proteins constitute a new regulatory network. The two proteins compete directly as mainly positive (DinI) and negative (RecX) modulators of RecA function.     

RecA dimers serve as a functional unit for assembly of active nucleoprotein filaments

All RecA-like recombinase enzymes catalyze DNA strand exchange as elongated filaments on DNA. Despite numerous biochemical and structural studies of RecA and the related Rad51 and RadA proteins, the unit oligomer(s) responsible for nucleoprotein filament assembly and coordinated filament activity remains undefined. We have created a RecA fused dimer protein and show that it maintains in vivo DNA repair and LexA co-protease activities, as well as in vitro ATPase and DNA strand exchange activities. Our results support the idea that dimeric RecA is an important functional unit both for assembly of nucleoprotein filaments and for their coordinated activity during the catalysis of homologous recombination.     

Fibrillins, fibulins, and matrix-associated glycoprotein modulate the kinetics and morphology of in vitro self-assembly of a recombinant elastin-like polypeptide

Elastin is the polymeric protein responsible for the properties of extensibility and elastic recoil of the extracellular matrix in a variety of tissues. Although proper assembly of the elastic matrix is crucial for its durability, the process by which this assembly takes place is not well-understood. Recent data suggest the complex interaction of tropoelastin, the monomeric form of elastin, with a number of other elastic matrix-associated proteins, including fibrillins, fibulins, and matrix-associated glycoprotein (MAGP), is important to achieve the proper architecture of the elastic matrix. At the same time, it is becoming clear that self-assembly properties intrinsic to tropoelastin itself, reflected in a temperature-induced phase separation known as coacervation, are also important in this assembly process. In this study, using a well-characterized elastin-like polypeptide that mimics the self-assembly properties of full-length tropoelastin, the process of self-assembly is deconstructed into "coacervation" and "maturation" stages that can be distinguished kinetically by different parameters. Members of the fibrillin, fibulin, and MAGP families of proteins are shown to profoundly affect both the kinetics of self-assembly and the morphology of the maturing coacervate, restricting the growth of coacervate droplets and, in some cases, causing clustering of droplets into fibrillar structures.     

Bax Activation Initiates the Assembly of a Multimeric Catalyst that Facilitates Bax Pore Formation in Mitochondrial Outer Membranes

Bax/Bak-mediated mitochondrial outer membrane permeabilization (MOMP) is essential for “intrinsic” apoptotic cell death. Published studies used synthetic liposomes to reveal an intrinsic pore-forming activity of Bax, but it is unclear how other mitochondrial outer membrane (MOM) proteins might facilitate this function. We carefully analyzed the kinetics of Bax-mediated pore formation in isolated MOMs, with some unexpected results. Native MOMs were more sensitive than liposomes to added Bax, and MOMs displayed a lag phase not observed with liposomes. Heat-labile MOM proteins were required for this enhanced response. A two-tiered mathematical model closely fit the kinetic data: first, Bax activation promotes the assembly of a multimeric complex, which then catalyzes the second reaction, Bax-dependent pore formation. Bax insertion occurred immediately upon Bax addition, prior to the end of the lag phase. Permeabilization kinetics were affected in a reciprocal manner by [cBid] and [Bax], confirming the “hit-and-run” hypothesis of cBid-induced direct Bax activation. Surprisingly, MOMP rate constants were linearly related to [Bax], implying that Bax acts non-cooperatively. Thus, the oligomeric catalyst is distinct from Bax. Moreover, contrary to common assumption, pore formation kinetics depend on Bax monomers, not oligomers. Catalyst formation exhibited a sharp transition in activation energy at ∼28°C, suggesting a role for membrane lipid packing. Furthermore, catalyst formation was strongly inhibited by chemical antagonists of the yeast mitochondrial fission protein, Dnm1. However, the mammalian ortholog, Drp1, was undetectable in mitochondrial outer membranes. Moreover, ATP and GTP were dispensable for MOMP. Thus, the data argue that oligomerization of a catalyst protein, distinct from Bax and Drp1, facilitates MOMP, possibly through a membrane-remodeling event.     

Dynamic properties of recA protein filaments from E. coli and P. aeruginosa investigated by neutron spin-echo

Bacterial RecA protein is the key enzyme in the processes of homologous recombination, post-replication repair and induction of SOS-repair functions. While a significant amount of data on the structure of RecA protein and its functional analogs has been obtained, there is little information about the molecular dynamics of this protein. In this work we present the results of neutron spin-echo measurements of the relaxation kinetics of filaments formed by RecA proteins from E. coli and P. aeruginosa. The results suggest that the protein filaments exhibit both diffusion and internal relaxation modes, which change during the formation of complexes of these proteins with ATP and single-stranded DNA.     

Kinetic studies of recA protein binding to a fluorescent single-stranded polynucleotide

Fluorescence spectroscopy was used to investigate the binding of Escherichia coli recA protein to a single-stranded polynucleotide. Poly(deoxy-1,N6-ethenoadenylic acid) was prepared by reaction of chloroacetaldehyde with poly(deoxyadenylic acid). The fluorescence of poly(deoxy-1,N6-ethenoadenylic acid) was enhanced upon recA protein binding. The kinetics of the binding process were studied as a function of several parameters: ionic concentration (KCl and MgCl2), pH, nature of the nucleoside triphosphate [adenosine 5'-triphosphate or adenosine 5'-O-(gamma-thiotriphosphate)], protein and polynucleotide concentrations, polynucleotide chain length, and order of sequential additions. The observed kinetic curves exhibited a lag phase followed by a slow binding process characteristic of a nucleation-elongation mechanism with an additional slow step governing the rate of the association process. The lag phase reflecting the nucleation step was not observed when the protein was first bound to the polynucleotide before addition of adenosine 5'-triphosphate. Adenosine 5'-triphosphate induced a dissociation of the recA protein, which was immediately followed by binding of the recA-adenosine 5'-triphosphate-Mg2+ ternary complex. The origin of this "mnemonic effect" and of the different kinetic steps is discussed with respect to protein conformational changes and aggregation phenomena.