Regulation of the actin-activated ATPase activity of Acanthamoeba myosin II by copolymerization with phosphorylated and dephosphorylated peptides derived from the carboxyl-terminal end of the heavy chain

Myosin II from Acanthamoeba castellanii is a conventional myosin composed of two heavy chains and two pairs of light chains. The amino-terminal approximately 90 kDa of each heavy chain form a globular head that contains the ATPase site and an ATP-sensitive actin-binding site. The carboxyl-terminal approximately 80 kDa of both heavy chains interact to form a coiled coil, helical rod (through which the molecules self-associate into bipolar filaments) ending in a short nonhelical tailpiece. Phosphorylation of 3 serine residues at the tip of the tail (at positions 11, 16, and 21 from the carboxyl terminus) inactivates the actin-activated Mg2(+)-ATPase activity of myosin II filaments. Previous work had indicated that the activity of each myosin II molecule in a filament reflects the global state of phosphorylation of the filament rather than the phosphorylation state of the molecule itself. We have now purified the approximately 28-kDa carboxyl-terminal region of the heavy chain lacking the last two phosphorylation sites, and we have shown that this peptide copolymerizes with and regulates the actin-activated Mg2(+)-ATPase activities of native dephosphorylated and phosphorylated myosin II. It can be concluded from these studies that the biologically relevant enzymatic activity of myosin II is regulated by a phosphorylation-dependent conformational change in the myosin filaments.     

Purification and characterization of a third isoform of myosin I from Acanthamoeba castellanii

A third isoform of myosin I has been isolated from Acanthamoeba and designated myosin IC. Peptide maps and immunoassays indicate that myosin IC is not a modified form of myosin IA, IB, or II. However, myosin IC has most of the distinctive properties of a myosin I. It is a globular protein of native Mr approximately 162,000, apparently composed of a single 130-kDa heavy chain and a pair of 14-kDa light chains. It is soluble in MgATP at low ionic strength, conditions favoring filament assembly by myosin II. Myosin IC has high Ca2+- and (K+,EDTA)-ATPase activities. Its low Mg2+-ATPase activity is stimulated to a maximum rate of 20 s-1 by the addition of F-actin if its heavy chain has been phosphorylated by myosin I heavy chain kinase. The dependence of the Mg2+-ATPase activity of myosin IC on F-actin concentration is triphasic; and, at fixed concentrations of F-action, this activity increases cooperatively as the concentration of myosin IC is increased. These unusual kinetics were first demonstrated for myosins IA and IB and shown to be due to the presence of two actin-binding sites on each heavy chain which enable those myosins I to cross-link actin filaments. Myosin IC is also capable of cross-linking F-actin, which, together with the kinetics of its actin-activated Mg2+-ATPase activity, suggests that it, like myosins IA and IB, possesses two independent actin-binding domains.     

ATPase activities and actin-binding properties of subfragments of Acanthamoeba myosin IA

Previous studies had led to the conclusion that the globular, single-headed myosins IA and IB from Acanthamoeba castellanii contain two actin-binding sites: one associated with the catalytic site and whose binding to F-actin activates the Mg2+-ATPase activity and a second site whose binding results in the cross-linking of actin filaments and makes the actin-activated ATPase activity positively cooperative with respect to myosin I concentration. We have now prepared a 100,000-Da NH2-terminal peptide and a 30,000-Da COOH-terminal peptide by alpha-chymotryptic digestion of the myosin IA heavy chain. The intact 17,000-Da light chain remained associated with the 100,000-Da fragment, which also contained the serine residue that must be phosphorylated for expression of actin-activated ATPase activity by native myosin IA. The 30,000-Da peptide, which contained 34% glycine and 21% proline, bound to F-actin with a KD less than 0.5 microM in the presence or absence of ATP but had no ATPase activity. The 100,000-Da peptide bound to F-actin with KD = 0.4-0.8 microM in the presence of 2 mM MgATP and KD less than 0.01 microM in the absence of MgATP. In contrast to native myosin IA, neither peptide cross-linked actin filaments. The phosphorylated 100,000-Da peptide had actin-activated ATPase activity with the same Vmax as that of native phosphorylated myosin IA but this activity displayed simple, noncooperative hyperbolic dependence on the actin concentration in contrast to the complex cooperative kinetics observed with native myosin IA. These results provide direct experimental evidence for the presence of two actin-binding sites on myosin IA, as was suggested by enzyme kinetic and filament cross-linking data, and also for the previously proposed mechanism by which monomeric myosins I could support contractile activities.     

Myosin and paramyosin of Caenorhabditis elegans: biochemical and structural properties of wild-type and mutant proteins.

Myosin and paramyosin have been purified from the nematode, Caenorhabditis elegans. The properties of the myosin in general resemble those of other myosins. The native molecule is a dimer of heavy (210,000 dalton) polypeptide chains and contains 18,000 and 16,000 dalton light chains. When rapidly precipitated from solution, it forms small, bipolar aggregates, about 150 nm long, consistent with the expected molecular structure of a rigid rod with a globular head region at one end. Its ATPase activity is stimulated by Ca2+ and EDTA. The myosin binds to F actin in a polar and ATP-sensitive manner, and the Mg2+-ATPase is activated by either F actin or nematode thin filaments. Dialysis of myosin to low ionic strength produces very long filaments. When a myosin-paramyosin mixture is dialyzed under the same condtions, co-filaments form which consist of a myosin cortex, surrounding a paramyosin core. Some properties of myosin from the mutants E675 and E190, which have functionally and structurally altered body wall muscles, are compared with those of wild-type myosin. These myosins of these results are discussed in terms of the myosin heavy chain composition.     

Supramolecular regulation of the actin-activated ATPase activity of filaments of Acanthamoeba Myosin II

Acanthamoeba myosin II has three phosphorylation sites clustered near the end of the tail of each of its two heavy chains (six phosphorylation sites/molecule). Myosin II has little or no actin-activated ATPase activity when four to six of these sites are phosphorylated. Maximal actin-activated ATPase activity is obtained when all six sites are dephosphorylated. Under assay conditions, both phosphorylated and dephosphorylated myosin II form bipolar filaments. Filaments of dephosphorylated myosin II have larger sedimentation coefficients than filaments of phosphorylated myosin II but this difference does not explain the difference in their actin-activated ATPase activities. Heteropolymers, formed by mixing soluble dephosphorylated and phosphorylated myosins and then diluting the mixture into low ionic strength buffer containing MgCl2, have sedimentation coefficients close to those of the homopolymer of phosphorylated myosin. The actin-activated ATPase activities of heteropolymers are, under most conditions, lower than the equivalent mixtures of homopolymers of dephosphorylated and phosphorylated myosins. It is concluded, therefore, that the phosphorylation of myosin tails regulates the actin-activated ATPase activity of Acanthamoeba myosin II by affecting the myosin filament as a whole rather than specifically affecting the heads of the phosphorylated myosin molecules only.     

The N-terminal domain of MYO18A has an ATP-insensitive actin-binding site

Myosin XVIII is the recently identified 18th class of myosins, and its members are composed of a unique N-terminal domain, a motor domain with an unusual sequence around the ATPase site, one IQ motif, a segmented coiled-coil region for dimerization, and a C-terminal globular tail. To gain insight into the functions of this unique myosin, we characterized its human homologue, MYO18A, focusing on the functional roles of the characteristic N-terminal domain that contains a PDZ module known to mediate protein-protein interaction. GFP-tagged full-length and C-terminally truncated MYO18A molecules that were expressed in HeLa cells exhibited colocalization with actin filaments. Chemical cross-linking of these molecules showed that they form stable dimers as expected from their putative coiled-coil tails. Cosedimentation of the various types of truncated MYO18A constructs with actin filaments indicated the presence of an ATP-insensitive actin-binding site in the N-terminal domain. Further studies on truncated constructs of the N-terminal domain indicated that this actin-binding site is located outside the PDZ module, but within the middle region of this domain, which does not show any homology with the known actin-binding motifs. These results imply that this dimeric myosin might stably cross-link actin filaments by two ATP-insensitive actin-binding sites at the N-terminal domains for higher-order organization of the actin cytoskeleton.     

A kinetic model for the molecular basis of the contractile activity of Acanthamoeba myosins IA and IB

Acanthamoeba myosins IA and IB are single-headed, monomeric molecules consisting of one heavy chain and one light chain. Both have high actin-activated Mg2+-ATPase activity, when the heavy chain is phosphorylated, but neither seems to be able to form the bipolar filaments that are generally thought to be required for actomyosin-dependent contractility. In this paper, we show that, at fixed F-actin concentration, the actin-activated Mg2+-ATPase activities of myosins IA and IB increase about 5-fold in specific activity in a cooperative manner as the myosin concentration is increased. The myosin concentration range over which this cooperative change occurs depends on the actin concentration. More myosin I is required for the cooperative increase in activity at high concentrations of F-actin. The cooperative increase in specific activity at limiting actin concentrations is caused by a decrease in the KATPase for F-actin. The high and low KATPase states of the myosin have about the same Vmax at infinite actin concentration. Both myosins are completely bound to the F-actin long before the Vmax values are reached. Therefore, much of the actin activation must be the result of interactions between F-actin and actomyosin. These kinetic data can be explained by a model in which the cooperative shift of myosin I from the high KATPase to the low KATPase state results from the cross-linking of actin filaments by myosin I. Cross-linking might occur either through two actin-binding sites on a single molecule or by dimers or oligomers of myosin I induced to form by the interaction of myosin I monomers with the actin filaments. The ability of Acanthamoeba myosins IA and IB to cross-link actin filaments is demonstrated in the accompanying paper (Fujisaki, H., Albanesi, J.P., and Korn, E.D. (1985) J. Biol. Chem. 260, 11183-11189).     

Purification and characterization of a myosin I heavy chain kinase from Acanthamoeba castellanii

In previous work from this laboratory, a partially purified protein kinase from the soil amoeba Acanthamoeba castellanii was shown to phosphorylate the heavy chain of the two single-headed Acanthamoeba myosin isoenzymes, myosin IA and IB, resulting in a 10- to 20-fold increase in their actin-activated Mg2+-ATPase activities (Maruta, H., and Korn, E.D. (1977) J. Biol. Chem. 252, 8329-8332). A myosin I heavy chain kinase has now been purified to near homogeneity from Acanthamoeba by chromatography on DE-52 cellulose, phosphocellulose, and Procion red dye, followed by chromatography on histone-Sepharose. Myosin I heavy chain kinase contains a single polypeptide of 107,000 Da by electrophoretic analysis. Molecular sieve chromatography yields a Stokes radius of 4.1 nm, consistent with a molecular weight of 107,000 for a native protein with a frictional ratio of approximately 1.3:1. The kinase catalyzes the incorporation of 0.9 to 1.0 mol of phosphate into the heavy chain of both myosins IA and IB. Phosphoserine has been shown to be the phosphorylated amino acid in myosin IB. The kinase has highest specific activity toward myosin IA and IB, about 3-4 mumol of phosphate incorporated/min/mg (30 degrees C) at concentrations of myosin I that are well below saturating levels. The kinase also phosphorylates histone 2A, isolated smooth muscle light chains, and, to a very small extent, casein, but has no activity toward phosvitin or myosin II, a third Acanthamoeba myosin isoenzyme with a very different structure from myosin IA and IB. Myosin I heavy chain kinase requires Mg2+ but is not dependent on Ca2+, Ca2+/calmodulin, or cAMP for activity. The kinase undergoes an apparent autophosphorylation.     

The localization and sequence of the phosphorylation sites of Acanthamoeba myosins I. An improved method for locating the phosphorylated amino acid

The actin-activated Mg2+-ATPase activities of Acanthamoeba myosins IA, IB, and IC are expressed only when a single site in their heavy chains is phosphorylated by a myosin I heavy chain-specific kinase. We show that phosphorylation occurs at Ser-315 in the myosin IB heavy chain, Ser-311 in myosin IC, and a threonine residue at a corresponding position in myosin IA whose amino acid sequence is as yet unknown. The most obvious feature common to the three substrates is a basic amino acid(s) 2 or 3 residues before the site of phosphorylation. The phosphorylation site is located between the ATP- and actin-binding sites, which corresponds to the middle of the 50-kDa domain of skeletal muscle myosin subfragment 1. The sequence similarity between the region surrounding the phosphorylation site of myosin I and subfragment 1 is much lower than the average sequence similarity between myosin I and subfragment 1. This is consistent with the hypothesis that the conformation of this region of myosin I differs from that of the corresponding region in skeletal muscle myosin and that phosphorylation converts the conformation of the actomyosin I complex into a conformation comparable to that present in actosubfragment 1 without phosphorylation. The protein sequences obtained in the course of this work led to the conclusion that the myosin I genes previously identified as myosin IB and IL (myosin-like) heavy chains actually are the myosin IC and IB heavy chains, respectively. Finally, we report a modification of the method for monitoring the appearance of 32Pi during sequencing of 32P-labeled peptides that results in almost complete recovery of the radioactivity, thus allowing unequivocal assignment of the position of the phosphorylated residue.     

Myosin from human erythrocytes

We have purified myosin from human erythrocytes using methods similar to that for other cytoplasmic myosins with a yield of about 500 micrograms/100 ml of packed cells. It consists of a 200-kDa heavy chain and light chains of 26- and 19.5 kDa and therefore differs from the isozyme in platelets which has light chains of 20- and 15 kDa. At low ionic strength, the myosin forms short bipolar filaments like those of platelet myosin. Eight of eight monoclonal antibodies to platelet myosin also bind to erythrocyte myosin. Like most myosins, it has a high ATPase activity in the presence of Ca2+ or EDTA, but is inhibited by Mg2+. Myosin light-chain kinase transfers 1 phosphate from ATP to the 20-kDa light chain, and this stimulates the actin-activated ATPase. Thus, myosin may play a role in shape changes in the erythrocytes.     

Identification and phylogenetic analysis of Drosophila melanogaster myosins

Myosins constitute a superfamily of motor proteins that convert energy from ATP hydrolysis into mechanical movement along the actin filaments. Phylogenetic analysis currently places myosins into 17 classes based on class-specific features of their conserved motor domain. Traditionally, the myosins have been divided into two classes depending on whether they form monomers or dimers. The conventional myosin of muscle and nonmuscle cells forms class II myosins. They are complex molecules of four light chains bound to two heavy chains that form bipolar filaments via interactions between their coiled-coil tails (type II). Class I myosins are smaller monomeric myosins referred to as unconventional myosins. Now, at least 15 other classes of unconventional myosins are known. How many myosins are needed to ensure the proper development and function of eukaryotic organisms? Thus far, three types of myosins were found in budding yeast, six in the nematode Caenorhabditis elegans, and at least 12 in human. Here, we report on the identification and classification of Drosophila melanogaster myosins. Analysis of the Drosophila genome sequence identified 13 myosin genes. Phylogenetic analysis based on the sequence comparison of the myosin motor domains, as well as the presence of the class-specific domains, suggests that Drosophila myosins can be divided into nine major classes. Myosins belonging to previously described classes I, II, III, V, VI, and VII are present. Molecular and phylogenetic analysis indicates that the fruitfly genome contains at least five new myosins. Three of them fall into previously described myosin classes I, VII, and XV. Another myosin is a homolog of the mouse and human PDZ-containing myosins, forming the recently defined class XVIII myosins. PDZ domains are named after the postsynaptic density, disc-large, ZO-1 proteins in which they were first described. The fifth myosin shows a unique domain composition and a low homology to any of the existing classes. We propose that this is classified when similar myosins are identified in other species.     

Complete nucleotide sequence and deduced polypeptide sequence of a nonmuscle myosin heavy chain gene from Acanthamoeba: evidence of a hinge in the rodlike tail

We have completely sequenced a gene encoding the heavy chain of myosin II, a nonmuscle myosin from the soil ameba Acanthamoeba castellanii. The gene spans 6 kb, is split by three small introns, and encodes a 1,509-residue heavy chain polypeptide. The positions of the three introns are largely conserved relative to characterized vertebrate and invertebrate muscle myosin genes. The deduced myosin II globular head amino acid sequence shows a high degree of similarity with the globular head sequences of the rat embryonic skeletal muscle and nematode unc 54 muscle myosins. By contrast, there is no unique way to align the deduced myosin II rod amino acid sequence with the rod sequence of these muscle myosins. Nevertheless, the periodicities of hydrophobic and charged residues in the myosin II rod sequence, which dictate the coiled-coil structure of the rod and its associations within the myosin filament, are very similar to those of the muscle myosins. We conclude that this ameba nonmuscle myosin shares with the muscle myosins of vertebrates and invertebrates an ancestral heavy chain gene. The low level of direct sequence similarity between the rod sequences of myosin II and muscle myosins probably reflects a general tolerance for residue changes in the rod domain (as long as the periodicities of hydrophobic and charged residues are largely maintained), the relative evolutionary "ages" of these myosins, and specific differences between the filament properties of myosin II and muscle myosins. Finally, sequence analysis and electron microscopy reveal the presence within the myosin II rodlike tail of a well-defined hinge region where sharp bending can occur. We speculate that this hinge may play a key role in mediating the effect of heavy chain phosphorylation on enzymatic activity.     

Myosin from pancreatic acinar carcinoma cells. Isolation, characterization and demonstration of heavy- and light-chain phosphorylation.

Myosin has been identified in a variety of non-muscle cells, and is believed to play a role in maintenance of cell shape, locomotion, cytokinesis, exocytosis and other cellular functions. In this paper we describe the purification of myosin from a pancreatic acinar-cell carcinoma of the rat which forms solid tumours, but retains many differentiated functions. The purified myosin was composed of a 200,000 Da heavy chain and two or three classes of light chains. Electron-microscopic examination of rotary-shadowed preparations revealed that individual molecules had two globular heads and a long tail measuring approx. 149 nm. The myosin was soluble in high-salt buffers and became sedimentable as the ionic strength was lowered. Examination of negative-stained preparations showed that this sedimentable myosin consisted of short, bipolar, thick filaments which had a strong tendency to aggregate in a head-to-head manner. The ATPase activity of the purified myosin was stimulated by EDTA or Ca2+, but not by Mg2+. In low ionic strength the Mg2+-dependent ATPase activity was activated by muscle f-actin. The pancreatic myosin bound to actin and could be dissociated by the addition of MgATP. Myosin purified from cells cultured in media containing [32P]Pi was phosphorylated on one of the light chains as well as the heavy chain. Thus pancreatic acinar cells contain a typical non-muscle myosin, and the subunits of this molecule are subject to post-translational modification by phosphorylation.     

Regulation of calmodulin-binding myosins

Myosins constitute a diverse superfamily of actin-based mechanoenzymes that are involved in many essential cellular motilities. In addition to conventional muscle myosin II, ten other classes of unconventional myosins are known. Many unconventional myosins bind multiple calmodulin light chains and Ca2+, which can dramatically alter their mechanochemical and enzymatic activity. Calmodulin-binding myosins can also be regulated by phospholipid binding, phosphorylation of the heavy chain and actin-binding proteins. The molecular details linking unconventional-myosin regulation and function are just beginning to emerge.     

Identification and characterization of Tetrahymena myosin

Myosin was partially purified from ciliated protozoan Tetrahymena pyriformis. Tetrahymena myosin has a fibrous tail with two globular heads at one end and contains 220-kDa heavy chains. The tail length of the molecule (200 nm) is longer than that of myosins from other animals (approximately 160 nm). A sample after HPLC column chromatography containing 220-kDa peptide showed a myosin-specific K⁺-/NH₄⁺-EDTA-ATPase activity. Polyclonal anti-crayfish myosin heavy chain antibody reacted with Tetrahymena 220-kDa myosin heavy chain, and monoclonal anti-pan myosin antibody reacted with Tetrahymena 180-kDa peptide. The isolated 180-kDa peptide was identified as a clathrin heavy chain.     

The isolated heavy chain of an Acanthamoeba myosin contains full enzymatic activity.

Acanthamoeba myosin IB is a single-headed enzyme containing one heavy chain of 125,000 daltons, one light chain of 27,000 daltons, and one light chain of 14,000 daltons. The 125,000- and 27,000-dalton polypeptides are consistently found in a molar ratio of 1:1. The content of the 14,000-dalton peptide is usually only 0.1 to 0.2, and always less than 0.5, relative to the other two chains and might be a contaminant or a degradation product of one of the other chains. The specific activities of the Ca2+-ATPase, (K+, EDTA)-ATPase, and (after phosphorylation of its heavy chain by a specific kinase) actin-activated Mg2+-ATPase of Acanthamoeba myosin IB are similar to those of rabbit skeletal muscle myosin. After treatment of the enzyme with 2 M LiCl, the 125,000-dalton heavy chain of Acanthamoeba myosin Ib can be obtained, by chromatography on Sephadex G-200, essentially free of the 14,000-dalton peptide and more than 90% free of the 27,000-dalton peptide. This isolated heavy chain has the same specific ATPase activities as the original enzyme. Therefore, the heavy chain of Acanthamoeba myosin IB contains the ATPase catalytic site, the actin-binding site, and the phosphorylation site and is fully active enzymatically in the absence of light chains.     

Localization of the actin-binding sites of Acanthamoeba myosin IB and effect of limited proteolysis on its actin-activated Mg2+-ATPase activity

Acanthamoeba myosin IB contains a 125-kDa heavy chain that has high actin-activated Mg2+-ATPase activity when 1 serine residue is phosphorylated. The heavy chain contains two F-actin-binding sites, one associated with the catalytic site and a second which allows myosin IB to cross-link actin filaments but has no direct effect on catalytic activity. Tryptic digestion of the heavy chain initially produces an NH2-terminal 62-kDa peptide that contains the ATP-binding site and the regulatory phosphorylation site, and a COOH-terminal 68-kDa peptide. F-actin, in the absence of ATP, protects this site and tryptic cleavage then produces an NH2-terminal 80-kDa peptide. Both the 62- and the 80-kDa peptides retain the (NH+4,EDTA)-ATPase activity of native myosin IB and both bind to F-actin in an ATP-sensitive manner. However, only the 80-kDa peptide retains a major portion of the actin-activated Mg2+-ATPase activity. This activity requires phosphorylation of the 80-kDa peptide by myosin I heavy chain kinase but, in contrast to the activity of intact myosin IB, it has a simple, hyperbolic dependence on the concentration of F-actin. Also unlike myosin IB, the 80-kDa peptide cannot cross-link F-actin filaments indicating the presence of only a single actin-binding site. These results allow the assignment of the actin-binding site involved in catalytic activity to the region near, and possibly on both sides of, the tryptic cleavage site 62 kDa from the NH2 terminus, and the second actin-binding site to the COOH-terminal 45-kDa domain. Thus, the NH2-terminal 80 kDa of the myosin IB heavy chain is functionally similar to the 93-kDa subfragment 1 of muscle myosin and most likely has a similar organization of functional domains.     

Substrate specificity of Acanthamoeba myosin I heavy chain kinase as determined with synthetic peptides

Phosphorylation of a single threonine (myosin IA) or serine (myosins IB and IC) in the heavy chains of the Acanthamoeba myosin I isozymes is required for expression of their actin-activated Mg2(+)-ATPase activities. We now report that the synthetic peptide Gly-Arg-Gly-Arg-Ser-Ser-Val-Tyr-Ser, which corresponds to the phosphorylated region of Acanthamoeba myosin IC, is a good substrate for myosin I heavy chain kinase: Km = 54 microM, and Vmax = 15 mumols/min.mg. The same serine is phosphorylated as in the native substrate (residue 6 in the above sequence), and kinase activity with the synthetic peptide as substrate is also stimulated by phosphatidylserine-enhanced autophosphorylation of the kinase. These results indicate that all of the essential sequence determinants of kinase specificity are contained within this 9-residue peptide. With the peptide as substrate, we found that another acidic phospholipid, phosphatidylinositol, also enhances autophosphorylation of the kinase whereas the neutral phospholipids phosphatidylcholine and phosphatidylethanolamine do not. By comparing the Km and Vmax values for a series of synthetic peptide substrates, we established that 1 basic amino acid is essential on the NH2-terminal side of the phosphorylation site, and two are preferable, and that a tyrosine is essential 2 residues away on the COOH-terminal side. There is a slight preference for arginines over lysines. All of these local sequence specificity determinants are present in the three native substrates, Acanthamoeba myosins IA, IB, and IC, and in two Dictyostelium myosin I isozymes that are putative substrates for the kinase. Similar sequences do not occur in the myosins I from intestinal brush border, which is not a substrate for the Acanthamoeba kinase.     

Peptide maps of the myosin isoenzymes of Acanthamoeba castellanii.

Extracts of Acanthamoeba castellanii contain four myosin-like ATPases (Maruta, H., Gadasi, H., Collins, J.H., and Korn, E.D. (1979) J. Biol. Chem. 254, 3624-3630): double-headed Acanthamoeba myosin II and single-headed Acanthamoeba myosins IA, IB, and IC, which have heavy chains of 170,000, 130,000, 125,000, and 130,000 daltons, respectively, as well as different light chains. In the accompanying paper, evidence is presented that suggests that Acanthamoeba myosin IC is the same molecule as Acanthamoeba myosin IA plus a regulatory 20,000-dalton peptide. This conclusion is confirmed by the identity of the peptide maps obtained by limited proteolysis of the heavy chains of Acanthamoeba myosins IA and IC by Staphylococcus aureus V8 protease. However, peptide maps of the heavy chains of Acanthamoeba myosins IA, IB, and II obtained by limited proteolysis by the Staphylococcus protease and chymotrypsin and by chemical cleavage by cyanogen bromide and cyanylation have few, if any, peptides in common. From this evidence, and the enzymatic and subunit data in the accompanying paper, it is concluded that the three Acanthamoeba myosin isoenzymes, IA (IC), IB, and II, are products of different genes.     

Quantification and localization of phosphorylated myosin I isoforms in Acanthamoeba castellanii

The actin-activated Mg(2+)-ATPase activities of the three myosin I isoforms in Acanthamoeba castellanii are significantly expressed only after phosphorylation of a single site in the myosin I heavy chain. Synthetic phosphorylated and unphosphorylated peptides corresponding to the phosphorylation site sequences, which differ for the three myosin I isoforms, were used to raise isoform-specific antibodies that recognized only the phosphorylated myosin I or the total myosin I isoform (phosphorylated and unphosphorylated), respectively. With these antisera, the amounts of total and phosphorylated isoform were quantified, the phosphomyosin I isoforms localized, and the compartmental distribution of the phosphomyosin isoforms determined. Myosin IA, which was almost entirely in the actin-rich cortex, was 70- 100% phosphorylated and particularly enriched under phagocytic cups. Myosins IB and IC were predominantly associated with plasma membranes and large vacuole membranes, where they were only 10-20% phosphorylated, whereas cytoplasmic myosins IB and IC, like cytoplasmic myosin IA, were mostly phosphorylated (60-100%). Moreover, phosphomyosin IB was concentrated in actively motile regions of the plasma membrane. More than 20-fold more phosphomyosin IC and 10-fold more F-actin were associated with the membranes of contracting contractile vacuoles (CV) than of filling CVs. As the total amount of CV-associated myosin IC remained constant, it must be phosphorylated at the start of CV contraction. These data extend previous proposals for the specific functions of myosin I isozymes in Acanthamoeba (Baines, I.C., H. Brzeska, and E.D. Korn. 1992. J. Cell Biol. 119: 1193-1203): phosphomyosin IA in phagocytosis, phosphomyosin IB in phagocytosis and pinocytosis, and phosphomyosin IC in contraction of the CV.