X-ray structure of HIV-1 protease tethered dimer complexed to ritonavir

We report here the 2.5A structure of HIV-1 protease tethered-dimer ritonavir complex. The inhibitor bound in the active site has different conformations in the two orientations. There is only one hydrogen bond between the inhibitor and the enzyme. The conserved flap-water is not found in the present complex.     

Structure at 2.5-A resolution of chemically synthesized human immunodeficiency virus type 1 protease complexed with a hydroxyethylene-based inhibitor

The crystal structure of a complex between chemically synthesized human immunodeficiency virus type 1 (HIV-1) protease and an octapeptide inhibitor has been refined to an R factor of 0.138 at 2.5-A resolution. The substrate-based inhibitor, H-Val-Ser-Gln-Asn-Leu psi [CH(OH)CH2]Val-Ile-Val-OH (U-85548e) contains a hydroxyethylene isostere replacement at the scissile bond that is believed to mimic the tetrahedral transition state of the proteolytic reaction. This potent inhibitor has Ki less than 1 nM and was developed as an active-site titrant of the HIV-1 protease. The inhibitor binds in an extended conformation and is involved in beta-sheet interactions with the active-site floor and flaps of the enzyme, which form the substrate/inhibitor cavity. The inhibitor diastereomer has the S configuration at the chiral carbon atom of the hydroxyethylene insert, and the hydroxyl group is within H-bonding distance of the two active-site carboxyl groups in the enzyme dimer. The two subunits of the enzyme are related by a pseudodyad, which superposes them at a 178 degrees rotation. The main difference between the subunits is in the beta turns of the flaps, which have different conformations in the two monomers. The inhibitor has a clear preferred orientation in the active site and the alternative conformation, if any, is a minor one (occupancy of less than 30%). A new model of the enzymatic mechanism is proposed in which the proteolytic reaction is viewed as a one-step process during which the nucleophile (water molecule) and electrophile (an acidic proton) attack the scissile bond in a concerted manner.     

Conformational studies of irreversible HIV-1 protease inhibitors containing cis-epoxide as an amide isostere.

We have carried out NMR and molecular modeling studies of peptidomimetic HIV-1 protease inhibitors, LB71116: Qc-Asn-Phepsi[(1R,2S)-cis-epoxide]Gly-NH-CH(isopropyl)2 where Qc stands for quinaldic acid and LB71148: Qc-(SMe)Pen(O)2-Phepsi[(1R,2S)-cis-epoxide]Gly-NH-CH(isoprop yl)2 where (SMe)Pen(O)2 stands for S-methyl-S-dioxo-penicillamine. Through conformational calculations and NMR data analysis, we have obtained preferred conformations of the two inhibitors in solution. To our knowledge, this work is one of the first extensive conformational studies of peptidomimetics containing cis-epoxide amide isostere. The resulting preferred conformations contain extended structures. In these conformations, the psi of Phe(cep) is maintained about 130 degrees and the phi angle of (cep)Gly prefers +/- 150 degrees [where Phe(cep) and (cep)Gly are the residues generated by the replacement of the Phe-Gly peptide bond with cis-epoxide]. Two conformations were commonly observed in the preferred conformations of each inhibitor. Through restrained molecular dynamics simulating the hydrogen bond formation between our inhibitor and a water molecule ('flap water'), one of the conformations is assumed as the conformation which can bind to the enzyme without large conformational changes. Recently, we had the opportunity to compare the selected preferred conformation with the binding conformation of LB71116 observed from the X-ray studies of the complex between LB71116 and HIV-1 protease. These two conformations are surprisingly similar to each other. Thus, we can explain high activity and selectivity of our inhibitors to the HIV-1 protease by the similarity between the preferred conformations in solution and the binding conformation.     

Comparison of inhibitor binding in HIV-1 protease and in non-viral aspartic proteases: the role of the flap

The crystal structure of HIV-1 protease with an inhibitor has been compared with the structures of non-viral aspartic proteases complexed with inhibitors. In the dimeric HIV-1 protease, two 4-stranded beta-sheets are formed by half of the inhibitor, residues 27-29, and the flap from each monomer. In the monomeric non-viral enzyme the single flap does not form a beta-sheet with an inhibitor. The HIV-1 protease shows more interactions with a longer peptide inhibitor than are observed in non-viral aspartic protease-inhibitor complexes. This, and the large movement of the flaps, restricts the conformation of the protease cleavage sites in the retroviral polyprotein precursor.     

Role of hydroxyl group and R/S configuration of isostere in binding properties of HIV-1 protease inhibitors.

The crystal structure of the complex between human immunodeficiency virus type 1 (HIV-1) protease and a peptidomimetic inhibitor of ethyleneamine type has been refined to R factor of 0.178 with diffraction limit 2.5 A. The peptidomimetic inhibitor Boc-Phe-Psi[CH2CH2NH]-Phe-Glu-Phe-NH2 (denoted here as OE) contains the ethyleneamine replacement of the scissile peptide bond. The inhibitor lacks the hydroxyl group which is believed to mimic tetrahedral transition state of proteolytic reaction and thus is suspected to be necessary for good properties of peptidomimetic HIV-1 protease inhibitors. Despite the missing hydroxyl group the inhibition constant of OE is 1.53 nm and it remains in the nanomolar range also towards several available mutants of HIV-1 protease. The inhibitor was found in the active site of protease in an extended conformation with a unique hydrogen bond pattern different from hydroxyethylene and hydroxyethylamine inhibitors. The isostere nitrogen forms a hydrogen bond to one catalytic aspartate only. The other aspartate forms two weak hydrogen bridges to the ethylene group of the isostere. A comparison with other inhibitors of this series containing isostere hydroxyl group in R or S configuration shows different ways of accommodation of inhibitor in the active site. Special attention is devoted to intermolecular contacts between neighbouring dimers responsible for mutual protein adhesion and for a special conformation of Met46 and Phe53 side chains not expected for free protein in water solution.     

A cumulative specificity model for proteases from human immunodeficiency virus types 1 and 2, inferred from statistical analysis of an extended substrate data base.

Statistical analysis of an expanded data base of regions in viral polyproteins and in non-viral proteins that are sensitive to hydrolysis by the protease from human immunodeficiency virus (HIV) type 1 has generated a model which characterizes the substrate specificity of this retroviral enzyme. The model leads to an algorithm for predicting protease-susceptible sites from primary structure. Amino acids in each of the sites from P4 to P4' are tabulated for 40 protein substrates, and the frequency of occurrence for each residue is compared to the natural abundance of that amino acid in a selected data set of globular proteins. The results suggest that the highest stringency for particular amino acid residues is at the P2, P1, and P2' positions of the substrate. The broad specificity of the HIV-1 protease appears to be a consequence of its being able to bind productively substrates in which interactions with only a few Pi or Pi' side-chains need be optimized. The analysis, extended to 22 protein segments cleaved by the HIV-2 protease, delineates marked differences in specificity from that of the HIV-1 enzyme.     

Comparative analysis of the sequences and structures of HIV-1 and HIV-2 proteases

The different isolates available for HIV-1 and HIV-2 were compared for the region of the protease (PR) sequence, and the variations in amino acids were analyzed with respect to the crystal structure of HIV-1 PR with inhibitor. Based on the extensive homology (39 identical out of 99 residues), models were built of the HIV-2 PR complexed with two different aspartic protease inhibitors, acetylpepstatin and a renin inhibitor, H-261. Comparison of the HIV-1 PR crystal structure and the HIV-2 PR model structure and the analysis of the changes found in different isolates showed that correlated substitutions occur in the hydrophobic interior of the molecule and at surface residues involved in ionic or hydrogen bond interactions. The substrate binding residues of HIV-1 and HIV-2 PRs show conservative substitutions of four residues. The difference in affinity of HIV-1 and HIV-2 PRs for the two inhibitors appears to be due in part to the change of Val 32 in HIV-1 PR to Ile in HIV-2 PR.     

A preference-based free-energy parameterization of enzyme-inhibitor binding. Applications to HIV-1-protease inhibitor design.

The interface between protein receptor-ligand complexes has been studied with respect to their binary interatomic interactions. Crystal structure data have been used to catalogue surfaces buried by atoms from each member of a bound complex and determine a statistical preference for pairs of amino-acid atoms. A simple free energy model of the receptor-ligand system is constructed from these atom-atom preferences and used to assess the energetic importance of interfacial interactions. The free energy approximation of binding strength in this model has a reliability of about +/- 1.5 kcal/mol, despite limited knowledge of the unbound states. The main utility of such a scheme lies in the identification of important stabilizing atomic interactions across the receptor-ligand interface. Thus, apart from an overall hydrophobic attraction (Young L, Jernigan RL, Covell DG, 1994, Protein Sci 3:717-729), a rich variety of specific interactions is observed. An analysis of 10 HIV-1 protease inhibitor complexes is presented that reveals a common binding motif comprised of energetically important contacts with a rather limited set of atoms. Design improvements to existing HIV-1 protease inhibitors are explored based on a detailed analysis of this binding motif.     

Active-site mobility in human immunodeficiency virus, type 1, protease as demonstrated by crystal structure of A28S mutant.

The mutation Ala28 to serine in human immunodeficiency virus, type 1, (HIV-1) protease introduces putative hydrogen bonds to each active-site carboxyl group. These hydrogen bonds are ubiquitous in pepsin-like eukaryotic aspartic proteases. In order to understand the significance of this difference between HIV-1 protease and homologous, eukaryotic aspartic proteases, we solved the three-dimensional structure of A28S mutant HIV-1 protease in complex with a peptidic inhibitor U-89360E. The structure has been determined to 2.0 A resolution with an R factor of 0.194. Comparison of the mutant enzyme structure with that of the wild-type HIV-1 protease bound to the same inhibitor (Hong L, Treharne A, Hartsuck JA, Foundling S, Tang J, 1996, Biochemistry 35:10627-10633) revealed double occupancy for the Ser28 hydroxyl group, which forms a hydrogen bond either to one of the oxygen atoms of the active-site carboxyl or to the carbonyl oxygen of Asp30. We also observed marked changes in orientation of the Asp25 catalytic carboxyl groups, presumably caused by the new hydrogen bonds. These observations suggest that catalytic aspartyl groups of HIV-1 protease have significant conformational flexibility unseen in eukaryotic aspartic proteases. This difference may provide an explanation for some unique catalytic properties of HIV-1 protease.     

Crystal structure of an in vivo HIV-1 protease mutant in complex with saquinavir: insights into the mechanisms of drug resistance

Saquinavir is a widely used HIV-1 protease inhibitor drug for AIDS therapy. Its effectiveness, however, has been hindered by the emergence of resistant mutations, a common problem for inhibitor drugs that target HIV-1 viral enzymes. Three HIV-1 protease mutant species, G48V, L90M, and G48V/L90M double mutant, are associated in vivo with saquinavir resistance by the enzyme (Jacobsen et al., 1996). Kinetic studies on these mutants demonstrate a 13.5-, 3-, and 419-fold increase in Ki values, respectively, compared to the wild-type enzyme (Ermolieff J, Lin X, Tang J, 1997, Biochemistry 36:12364-12370). To gain an understanding of how these mutations modulate inhibitor binding, we have solved the HIV-1 protease crystal structure of the G48V/L90M double mutant in complex with saquinavir at 2.6 A resolution. This mutant complex is compared with that of the wild-type enzyme bound to the same inhibitor (Krohn A, Redshaw S, Richie JC, Graves BJ, Hatada MH, 1991, J Med Chem 34:3340-3342). Our analysis shows that to accommodate a valine side chain at position 48, the inhibitor moves away from the protease, resulting in the formation of larger gaps between the inhibitor P3 subsite and the flap region of the enzyme. Other subsites also demonstrate reduced inhibitor interaction due to an overall change of inhibitor conformation. The new methionine side chain at position 90 has van der Waals interactions with main-chain atoms of the active site residues resulting in a decrease in the volume and the structural flexibility of S1/S1' substrate binding pockets. Indirect interactions between the mutant methionine side chain and the substrate scissile bond or the isostere part of the inhibitor may differ from those of the wild-type enzyme and therefore may facilitate catalysis by the resistant mutant.     

A peptide inhibitor of HIV-1 protease using alpha, beta- dehydro residues: a structure based computer model

HIV-1 encodes an aspartic protease, an enzyme crucial to viral maturation and infectivity. It is responsible for the cleavage of various protein precursors into viral proteins. Inhibition of this enzyme prevents the formation of mature, infective viral particles and therefore, it is a potential target for therapeutic intervention following infection. Several drugs that inhibit the action of this enzyme have been discovered. These include peptidomimetic inhibitors such as ABT-538 and saquinavir, and structure based inhibitors such as indinavir and nelfinavir. Several of these have been tested in human clinical trials and have demonstrated significant reduction in viral load. However, most of them have been found to be of limited clinical utility because of their poor pharmacological properties and also because the viral protease becomes rapidly resistant to these drugs on account of mutations in the enzyme. One way to overcome these limitations is to design an inhibitor that interacts mainly with the conserved residues of HIV-1 protease. By a rational drug design approach based on the high resolution X-ray crystal structure of the HIV-1 protease with--MVT 101 (a substrate based inhibitor) and the specific design principles of peptides containing dehydro-Alanine (delta Ala) derived from our earlier studies, we have designed a tetrapeptide with the sequence: NH2-Thr-delta Ala-delta Ala-Gln-COOH. Energy minimization and molecular modelling of the interaction of the designed tetrapeptide with the inhibitor binding site indicate that the inhibitor is in an extended conformation and makes excessive contacts with the viral enzyme at the interface between the protein subunits. The designed inhibitor has 33% of its interaction with the conserved region of HIV-1 protease which is of the same order as that of MVT 101 with the enzyme.     

X-ray crystal structures of human immunodeficiency virus type 1 protease mutants complexed with atazanavir

Atazanavir, which is marketed as REYATAZ, is the first human immunodeficiency virus type 1 (HIV-1) protease inhibitor approved for once-daily administration. As previously reported, atazanavir offers improved inhibitory profiles against several common variants of HIV-1 protease over those of the other peptidomimetic inhibitors currently on the market. This work describes the X-ray crystal structures of complexes of atazanavir with two HIV-1 protease variants, namely, (i) an enzyme optimized for resistance to autolysis and oxidation, referred to as the cleavage-resistant mutant (CRM); and (ii) the M46I/V82F/I84V/L90M mutant of the CRM enzyme, which is resistant to all approved HIV-1 protease inhibitors, referred to as the inhibitor-resistant mutant. In these two complexes, atazanavir adopts distinct bound conformations in response to the V82F substitution, which may explain why this substitution, at least in isolation, has yet to be selected in vitro or in the clinic. Because of its nearly symmetrical chemical structure, atazanavir is able to make several analogous contacts with each monomer of the biological dimer.     

Evaluation of triazolamers as active site inhibitors of HIV-1 protease

Proteases typically recognize their peptide substrates in extended conformations. General approaches for designing protease inhibitors often consist of peptidomimetics that feature this conformation. Herein we discuss a combination of computational and experimental studies to evaluate the potential of triazole-linked β-strand mimetics as inhibitors of HIV-1 protease activity.     

Crystal structure of lysine sulfonamide inhibitor reveals the displacement of the conserved flap water molecule in human immunodeficiency virus type 1 protease

Human immunodeficiency virus type 1 (HIV-1) protease has been continuously evolving and developing resistance to all of the protease inhibitors. This requires the development of new inhibitors that bind to the protease in a novel fashion. Most of the inhibitors that are on the market are peptidomimetics, where a conserved water molecule mediates hydrogen bonding interactions between the inhibitors and the flaps of the protease. Recently a new class of inhibitors, lysine sulfonamides, was developed to combat the resistant variants of HIV protease. Here we report the crystal structure of a lysine sulfonamide. This inhibitor binds to the active site of HIV-1 protease in a novel manner, displacing the conserved water and making extensive hydrogen bonds with every region of the active site.     

Effects of PRE and POST therapy drug-pressure selected mutations on HIV-1 protease conformational sampling

Conformational sampling of pre- and post-therapy subtype B HIV-1 protease sequences derived from a pediatric subject infected via maternal transmission with HIV-1 were characterized by double electron–electron resonance spectroscopy. The conformational ensemble of the PRE construct resembles native-like inhibitor bound states. In contrast, the POST construct, which contains accumulated drug-pressure selected mutations, has a predominantly semi-open conformational ensemble, with increased populations of open-like states. The single point mutant L63P, which is contained in PRE and POST, has decreased dynamics, particularly in the flap region, and also displays a closed-like conformation of inhibitor-bound states. These findings support our hypothesis that secondary mutations accumulate in HIV-1 protease to shift conformational sampling to stabilize open-like conformations, while maintaining the predominant semi-open conformation for activity.     

Proteases and their inhibitors: today and tomorrow.

A major incentive in inhibitor research is that control of limited proteolysis constitutes a valuable pharmacological tool. Protease inhibitors have proved to be successful in influencing pathogenesis in many experimental models but a breakthrough to use in human therapy has mainly been restricted to aprotinin and angiotensin converting enzyme (ACE) inhibitors. However, the success of ACE inhibitors as pharmacological tools in hypertension has proved to be a strong stimulant for new protease inhibitor approaches to drug therapy. While emphasis in the search for next generations of ACE inhibitors may move from the circulation renin-angiotensin system to the local tissue systems, including heart, brain and genital tract, persistent and insightful design of renin inhibitors has already yielded highly specific molecules with potent activities in several in vivo models. The development of orally effective long-acting inhibitors will finally allow an evaluation to be made of their therapeutic profile with regard to the family of ACE inhibitors. The close relationship between renin and HIV-1 protease presents an exceptional opportunity for transfer of the knowledge acquired in renin inhibitor development during the past decade, to an accelerated generation of specific HIV-1 protease inhibitors as effective agents in treatment of AIDS. The self-assembly of 2 identical monomers into a symmetrical structure in HIV-1 protease is not only an elegant way to create an active enzyme while encoding a minimal amount of genetic information, but is also in concordance with the bilobular active-site found in mammalian aspartic proteases.(ABSTRACT TRUNCATED AT 250 WORDS)     

The effect of inhibitor binding on the structural stability and cooperativity of the HIV-1 protease.

The effects of the peptide inhibitor acetyl pepstatin on the structural stability of the HIV-1 protease have been measured by high sensitivity calorimetric techniques. At 25 degrees C and pH 3.6, acetyl pepstatin binds to HIV-1 protease with an affinity of 1.6 x 10(7 )M-1 and an enthalpy of 7.3 +/- 0.5 kcal/mol, indicating that binding is not favored enthalpically and that the favorable Gibbs energy originates from a large positive entropy. Since the binding of acetyl pepstatin is associated with a negative change in heat capacity (-450 cal/K*mol) the association reaction becomes enthalpically favored at temperatures higher than 40 degrees C. The presence of the inhibitor stabilizes the dimeric structure of the protease in a fashion that can be quantitatively described by a set of thermodynamic linkage equations. The combination of titration and differential scanning calorimetry provides an accurate way of determining binding constants for high affinity inhibitors that cannot be determined by titration calorimetry alone. A structure-based thermodynamic analysis of the binding process indicates that the stabilization effect is not distributed uniformly throughout the protease molecule. The binding of the inhibitor selectively stabilizes those conformational states in which the binding site is formed, triggering a redistribution of the state probabilities in the ensemble of conformations populated under native conditions. As a result, the stability constants for individual residues do not exhibit the same change in magnitude upon inhibitor binding. Residues in certain areas of the protein are affected significantly whereas residues in other areas are not affected at all. In particular, inhibitor binding has a significant effect on those regions that define the binding site, especially the flap region which becomes structurally stable as a result of the additional binding free energy. The induced stabilization propagates to regions not in direct contact with the inhibitor, particularly to the strand between residues Pro9 and Ala22 and the helix between Arg87 and Gly94. On the other hand, the stability of the strand between Asp60 and Leu76 is not significantly affected by inhibitor binding. The structural distribution of binding effects define cooperative pathways within the protease molecule. Proteins 1999;36:147-156.     

High resolution crystal structures of HIV-1 protease with a potent non-peptide inhibitor (UIC-94017) active against multi-drug-resistant clinical strains

The compound UIC-94017 (TMC-114) is a second-generation HIV protease inhibitor with improved pharmacokinetics that is chemically related to the clinical inhibitor amprenavir. UIC-94017 is a broad-spectrum potent inhibitor active against HIV-1 clinical isolates with minimal cytotoxicity. We have determined the high-resolution crystal structures of UIC-94017 in complexes with wild-type HIV-1 protease (PR) and mutant proteases PR(V82A) and PR(I84V) that are common in drug-resistant HIV. The structures were refined at resolutions of 1.10-1.53A. The crystal structures of PR and PR(I84V) with UIC-94017 ternary complexes show that the inhibitor binds to the protease in two overlapping positions, while the PR(V82A) complex had one ordered inhibitor. In all three structures, UIC-94017 forms hydrogen bonds with the conserved main-chain atoms of Asp29 and Asp30 of the protease. These interactions are proposed to be critical for the potency of this compound against HIV isolates that are resistant to multiple protease inhibitors. Other small differences were observed in the interactions of the mutants with UIC-94017 as compared to PR. PR(V82A) showed differences in the position of the main-chain atoms of residue 82 compared to PR structure that better accommodated the inhibitor. Finally, the 1.10A resolution structure of PR(V82A) with UIC-94017 showed an unusual distribution of electron density for the catalytic aspartate residues, which is discussed in relation to the reaction mechanism.