Rotary torque produced by proton motive force in FoF1 motor

We have attempted direct observation of the light-driven rotation of a FoF(1)-ATP motor. The FoF(1)-ATP motor was co-reconstituted by the deletion-delta subunit of FoF(1)-ATP synthase with bacteriorhodopsins (BRs) into a liposome. The BR converts radiation energy into electrochemical gradient of proton to drive the FoF(1)-ATP motor. Therefore, the light-driven rotation of FoF(1)-ATP motor has been directly observed by a fluorescence microscopy using a fluorescent actin filament connected to beta-subunit as a marker of its orientation. The rotational torque value of the Fo motor was calculated as 27.93+/-1.88pNnm. The ATP motor is expected to be a promising rotary molecular motor in the development of nanodevices.     

Voltage-driven ATP synthesis by beef heart mitochondrial F0F1-ATPase

The F0F1-ATPase of the inner mitochondrial membrane catalyzes the conversion of a proton electrochemical energy into the chemical bond energy of ATP (Boyer, P.D., Chance, B., Ernster, L., Mitchell, P., Racker, E., and Slater, E.C. (1977) Annu. Rev. Biochem. 46, 955-1026). To assess the role of the membrane potential (delta psi) in this process and to study the effect of very short pulses on ATP synthesis, we employed a high voltage pulsation method (Kinosita, K., and Tsong, T.Y. (1977) Proc. Natl. Acad. Sci. U.S.A. 74, 1923-1927) to induce a delta psi of controlled magnitude and duration in a suspension of submitochondrial particles and F0F1-ATPase vesicles. Cyanide-treated submitochondrial particles were exposed to electric pulses of 10-30 kV/cm of magnitude (generating a peak delta psi of 150-450 mV) and 1-100 microseconds duration. Net [32P]ATP synthesis from [32P]Pi and ADP was observed with maximal values of 410 pmol/mg X pulse for a 30 kV/cm-100-microseconds pulse. This corresponds to a yield of 10-12 mol of ATP per mol of F0F1 complex per pulse. As many as 4 nmol/mg were produced after pulsing the same sample 8 times. By varying the ionic strength of the suspending medium, and consequently the pulse width, it is clearly shown that the synthesis was electrically driven and did not correlate with Joule heating of the sample. Titrations using specific inhibitors and ionophores were performed. The voltage-induced ATP synthesis was 50% inhibited by 0.11 microgram/mg of oligomycin and 2.4 nmol/mg of N,N'-dicyclohexylcarbodiimide. Ionophores and uncouplers had varying degrees of inhibition. The dependence of ATP synthesis on pulse width was nonlinear, exhibiting a threshold at 10 microseconds and a biphasic behavior above this value. Isolated F0F1-ATPase reconstituted into asolectin vesicles also synthesized ATP when pulsed with electric fields. A 35 kV/cm pulse induced the synthesis of 115 pmol of ATP per mg of protein, which corresponds to approximately 0.34 mol of ATP per mol of F0F1-ATPase. This synthesis was also sensitive to oligomycin and dicyclohexylcarbodiimide. The possibility of turnover of the ATPase in microseconds is considered.     

Inhibition of yeast mitochondrial F1-ATPase, F0F1-ATPase and submitochondrial particles by rhodamines and ethidium bromide

ATP hydrolysis by F1-ATPase is strongly inhibited by cationic rhodamines; neutral rhodamines are very poor inhibitors. Rhodamine 6G is a noncompetitive inhibitor of purified F0F1-ATPase and submitochondrial particles, however, an uncompetitive inhibitor of F1-ATPase (KI approximately equal to 2.4 microM for all three enzyme forms). Ethidium bromide is a noncompetitive inhibitor of F0F1-ATPase, submitochondrial particles and also F1-ATPase (KI approximately equal to 270 microM). Neither of the inhibitors affects the negative cooperativity (nH approximately equal to 0.7). The non-identical binding sites for rhodamine 6G and ethidium bromide are located on the F1-moiety and are topologically distinct from the catalytic site. Binding of the inhibitors prevents the conformational changes essential for energy transduction. It is concluded that the inhibitor binding sites are involved in proton translocation. In F1-ATPase, binding of MgATP at a catalytic site causes conformational changes, which allosterically induce the correct structure of the rhodamine 6G binding site. In F0F1-ATPase, this conformation of the F1-moiety exists a priori, due to allosteric interactions with F0-subunits. The binding site for ethidium bromide on F1-ATPase does not require substrate binding at the catalytic site and is not affected by F0F1-subunit interactions.     

Activation and Deactivation of F0F1-ATPase in Yeast Mitochrondia

The regulation of membrane-bound proton F₀F₁ATPase by the protonmotive force and nucleotides was studied in yeastmitochondria. Activation occurred in whole mitochondria and the ATPaseactivity was measured just after disrupting the membranes with Triton X-100.Deactivation occurred either in whole mitochondria uncoupled with FCCP, or indisrupted membranes. No effect of Triton X-100 on the ATPase was observed,except a slow reactivation observed only in the absence of MgADP. BothAMPPNP and ATP increased the ATPase deactivation rate, thus indicating thatoccupancy of nucleotidic sites by ATP is more decisive than catalyticturnover for this process. ADP was found to stimulate the energy-dependentATPase activation. ATPase deactivated at the same rate in uncoupled anddisrupted mitochondria. This suggests that deactivation is not controlled byrebinding of some soluble factor, like IF1, but rather by the conversion ofthe F₁.IF1 complex into an inactive form.     

F1F0-ATPase from Escherichia coli with mutant F0 subunits. Partial purification and immunoprecipitation of F1F0 complexes

Previously identified mutations in subunits a and b of the F0 sector of the F1F0-ATPase from Escherichia coli are further characterized by isolating detergent-solubilized, partially purified F1F0 complexes from cells bearing these mutations. The composition of the various F1F0 complexes was judged by quantitating the amount of each subunit present in the detergent-solubilized preparations. The composition of the F0 sectors containing altered polypeptides was determined by quantitating the F0 subunits that were immunoprecipitated by antibodies directed against the F1 portion. In this way, the relative amounts of F0 subunits (a, b, c) which survived the isolation procedure bound to F1 were determined for each mutation. This analysis indicates that both missense mutations in subunit a (aser206----leu and ahis245----tyr) resulted in the isolation of F1F0 complexes with normal subunit composition. The nonsense mutation in subunit a (atyr235----end) resulted in isolation of a complex containing the b and c subunits. The bgly131----asp mutation in the b subunit results in an F0 complex which does not assemble or survive the isolation. The isolated F1F0 complex containing the mutation bgly9----asp in the b subunit was defective in two regards: first, a reduction in F1 content relative to F0 and second, the absence of the a subunit. Immunoprecipitations of this preparation demonstrated that F1 interacts with both c and mutant b subunits. A strain carrying the mutation, bgly9----asp, and the compensating suppressor mutation apro240----leu (previously shown to be partially unc+) yielded an F1F0 ++ complex that remained partially defective in F1 binding to F0 but normal in the subunit composition of the F0 sector. The assembly, structure, and function of the F1F0-ATPase is discussed.     

Effect of external torque on the ATP-driven rotation of F1-ATPase

F₁-ATPase is a rotary molecular motor powered by the torque generated by another rotary motor F₀ to synthesize ATP in vivo. Therefore elucidation of the behavior of F₁ under external torque is very important. Here, we applied controlled external torque by electrorotation and investigated the ATP-driven rotation for the first time. The rotation was accelerated by assisting torque and decelerated by hindering torque, but F₁ rarely showed rotations in the ATP synthesis direction. This is consistent with the prediction by models based on the assumption that the rotation is tightly coupled to ATP hydrolysis and synthesis. At low ATP concentrations (2 and 5 μM), 120° stepwise rotation was observed. Due to the temperature rise during experiment, quantitative interpretation of the data is difficult, but we found that the apparent rate constant of ATP binding clearly decreased by hindering torque and increased by assisting torque.     

Mechanically driven proton conduction in single delta-free F0F1-ATPase

In order to observe mechanically driven proton flux in F(0)F(1)-ATPase coupled with artificial driven rotation on F(1) simultaneously, a double channel observation system was established. An artificial delta-free F(0)F(1)-ATPase was constructed with alpha(3), beta(3), epsilon, gamma, and c(n) subunits as rotator and a, b(2) as stator. The chromatophore was immobilized on the glass surface through biotin-streptavidin-biotin system, and the magnetic bead was attached to the beta subunit of delta-free F(0)F(1)-ATPase. The mechanically driven proton flux was indicated by the fluorescence intensity change of fluorescein reference standard (F1300) and recorded by a cooled digital CCD camera. The mechanochemical coupling stoichiometry between F(0) and F(1) is about 4.15 +/- 0.2H(+)/rev when the magnetic field rotated at 0.33 Hz (rps).     

Sulfite inhibits the F1F0-ATP synthase and activates the F1F0-ATPase of Paracoccus denitrificans

The F₁F₀ complex of Paracoccus denitrificans (PdF₁F₀) is the fastest ATP synthase but the slowest ATPase. Sulfite exerts maximal activation of the PdF₁F₀-ATPase (Pacheco-Moisés, F., García, J. J., Rodríguez-Zavala, J. S., and Moreno-Sánchez, R. (2000). Eur. J. Biochem. 267, 993–1000) but its effect on the PdF₁F₀-ATP synthase activity remains unknown. Therefore, we studied the effect of sulfite on ATP synthesis and ³²Pi ATP exchange reactions of inside-out membrane vesicles of P. denitrificans. Sulfite inhibited both reactions under conditions of maximal pH and normal sensitivity to dicyclohexylcarbodiimide. Sulfite increased by 10- and 5-fold the K _0.5 for Mg²⁺-ADP and Pi during ATP synthesis, respectively, and by 4-fold the IC₅₀ of Mg²⁺-ADP for inhibition of the PdF₁F₀-ATPase activity. Thus, sulfite exerts opposite effects on the forward and reverse functioning of the PdF₁F₀ complex. These effects are not due to membrane or PdF₁F₀ uncoupling. Kinetic and structural modifications that could account for these results are discussed.     

Inter-subunit rotation and elastic power transmission in F0F1-ATPase

ATP synthase (F-ATPase) produces ATP at the expense of ion-motive force or vice versa. It is composed from two motor/generators, the ATPase (F1) and the ion translocator (F0), which both are rotary steppers. They are mechanically coupled by 360 degrees rotary motion of subunits against each other. The rotor, subunits gamma(epsilon)C10-14, moves against the stator, (alphabeta)3delta(ab2). The enzyme copes with symmetry mismatch (C3 versus C10-14) between its two motors, and it operates robustly in chimeric constructs or with drastically modified subunits. We scrutinized whether an elastic power transmission accounts for these properties. We used the curvature of fluorescent actin filaments, attached to the rotating c ring, as a spring balance (flexural rigidity of 8.10(-26) N x m2) to gauge the angular profile of the output torque at F0 during ATP hydrolysis by F1. The large average output torque (56 pN nm) proved the absence of any slip. Angular variations of the torque were small, so that the output free energy of the loaded enzyme decayed almost linearly over the angular reaction coordinate. Considering the three-fold stepping and high activation barrier (>40 kJ/mol) of the driving motor (F1) itself, the rather constant output torque seen by F0 implied a soft elastic power transmission between F1 and F0. It is considered as essential, not only for the robust operation of this ubiquitous enzyme under symmetry mismatch, but also for a high turnover rate under load of the two counteracting and stepping motors/generators.     

Principal role of the arginine finger in rotary catalysis of F1-ATPase

F(1)-ATPase (F(1)) is an ATP-driven rotary motor wherein the γ subunit rotates against the surrounding α(3)β(3) stator ring. The 3 catalytic sites of F(1) reside on the interface of the α and β subunits of the α(3)β(3) ring. While the catalytic residues predominantly reside on the β subunit, the α subunit has 1 catalytically critical arginine, termed the arginine finger, with stereogeometric similarities with the arginine finger of G-protein-activating proteins. However, the principal role of the arginine finger of F(1) remains controversial. We studied the role of the arginine finger by analyzing the rotation of a mutant F(1) with a lysine substitution of the arginine finger. The mutant showed a 350-fold longer catalytic pause than the wild-type; this pause was further lengthened by the slowly hydrolyzed ATP analog ATPγS. On the other hand, the mutant F(1) showed highly unidirectional rotation with a coupling ratio of 3 ATPs/turn, the same as wild-type, suggesting that cooperative torque generation by the 3 β subunits was not impaired. The hybrid F(1) carrying a single copy of the α mutant revealed that the reaction step slowed by the mutation occurs at +200° from the binding angle of the mutant subunit. Thus, the principal role of the arginine finger is not to mediate cooperativity among the catalytic sites, but to enhance the rate of the ATP cleavage by stabilizing the transition state of ATP hydrolysis. Lysine substitution also caused frequent pauses because of severe ADP inhibition, and a slight decrease in ATP-binding rate.     

Using F0F1-ATPase motors as micro-mixers accelerates thrombolysis

We have developed a novel micro-mixer using a biological molecular ATP motor. The micro-mixer was constructed from arrays of chromatophore-embedded δ-free F₀F₁-ATPases, where the δ-free F₁ part acted as a rotator to mix solutions, and the F₀ part was driven by light. Confocal microscope studies indicated that the micro-mixer did not touch directly on the fibrin labeled with FITC. The nanomechanical force generated by the motor induced drug movement in the solution and accelerated the fibrinolysis process. All results strongly suggest that the micro-mixers generated a nanomechanical force which accelerated the fibrinolysis process in the presence of lower concentrations of lumbrokinase.     

Myocardial ischemic preconditioning and mitochondrial F1F0-ATPase activity

A short period of ischemia followed by reperfusion (ischemic preconditioning) is known to trigger mechanisms that contribute to the prevention of ATP depletion. In ischemic conditions, most of the ATP hydrolysis can be attributed to mitochondrial F₁F₀-ATPase (ATP synthase). The purpose of the present study was to examine the effect of myocardial ischemic preconditioning on the kinetics of ATP hydrolysis by F₁F₀-ATPase. Preconditioning was accomplished by three 3-min periods of global ischemia separated by 3 min of reperfusion. Steady state ATP hydrolysis rates in both control and preconditioned mitochondria were not significantly different. This suggests that a large influence of the enzyme on the preconditioning mechanism may be excluded. However, the time required by the reaction to reach the steady state rate was increased in the preconditioned group before sustained ischemia, and it was even more enhanced in the first 5 min of reperfusion (101 ± 3.0 sec in preconditioned vs. 83.4 ± 4.4 sec in controls, p 0.05). These results suggest that this transient increase in activation time may contribute to the cardioprotection by slowing the ATP depletion in the very critical early phase of post-ischemic reperfusion.     

F0F1-ATPase as biosensor to detect single virus

F(0)F(1)-ATPase within chromatophore was constructed as a biosensor (immuno-rotary biosensor) for the purpose of capturing single virus. Capture of virus was based on antibody-antigen reaction. The detection of virus based on proton flux change driven by ATP-synthesis of F(0)F(1)-ATPase, which was indicated by F1300, was directly observed by a fluorescence microscope. The results demonstrate that the biosensor loading of virus particles has remarkable signal-to-noise ratio (3.8:1) compared to its control at single molecular level, and will be convenient, quick, and even super-sensitive for detecting virus particles.     

The beta-subunit of the F1F0-ATPase is conserved in mycoplasmas

Monospecific polyclonal antibodies that were generated against the beta-subunit of Escherichia coli ATPase (F1Fo) cross-reacted with a protein present in the cells of several Mycoplasma and Acholeplasma species. In Mycoplasma gallisepticum, the reactive protein was found almost exclusively in the cell membrane. This protein had an apparent molecular mass of approximately 52 kDa and could not be released from the membranes by repeated washings with either low or high salt solutions in the presence or absence of EDTA. The reactive protein was found to be catalytically active, exhibiting up to 44% of the total membrane-bound ATPase activity. We suggest that mycoplasmas possess a F1Fo-ATPase which undergoes structural modification(s) allowing its integration into the membrane.     

Structural model of F1-ATPase and the implications for rotary catalysis

The crystal structure of bovine mitochondrial F1-ATPase is described. Several features of the structure are consistent with the binding change mechanism of catalysis, in which binding of substrates induces conformational changes that result in a high degree of cooperativity between the three catalytic sites. Furthermore, the structure also suggests that catalysis is accompanied by a physical rotation of the centrally placed gamma-subunit relative to the approximately spherical alpha3beta3 subassembly.     

Thermal inactivation of electron-transport functions and F0F1-ATPase activities

Bovine heart submitochondrial particles in suspension were heated at a designated temperature for 3 min, then cooled for biochemical assays at 30 degrees C. By enzyme activity measurements and polarographic assay of oxygen consumption, it is shown that the thermal denaturation of the respiratory chain takes place in at least four stages and each stage is irreversible. The first stage occurs at 51.0 +/- 1.0 degrees C, with the inactivation of NADH-linked respiration, ATP-driven reverse electron transport, F0F1 catalyzed ATP/Pi exchange, NADH and succinate-driven ATP synthesis. The second stage occurs at 56.0 +/- 1.0 degrees C, with the inactivation of succinate-linked proton pumping and respiration. The third stage occurs at 59.0 +/- 1.0 degrees C, with the inactivation of electron transfer from cytochrome c to cytochrome oxidase and ATP-dependent proton pumping. The ATP hydrolysis activity of F0F1 persists to 61.0 +/- 1.0 degrees C. An additional transition, detectable by differential scanning calorimetry, occurring around 70.0 +/- 2.0 degrees C, is probably associated with thermal denaturation of cytochrome c and other stable membrane proteins. In the presence of either mitochondrial matrix fluid or 2 mM mercaptoethanol, all five stages give rise to endothermic effects, with the absorption of approx. 25 J/g protein. Under aerobic conditions, however, the first four transitions become strongly exothermic, and release a total of approx. 105 J/g protein. Solubilized and reconstituted F0F1 vesicles also exhibit different inactivation temperatures for the ATP/Pi exchange, proton pumping and ATP hydrolysis activities. The first two activities are abolished at 49.0 +/- 1.0 degrees C, but the latter at 58.0 +/- 2.0 degrees C. Differential scanning calorimetry also detects biphasic transitions of F0F1, with similar temperatures of denaturation (49.0 and 54.0 degrees C). From these and other results presented in this communication, the following is concluded. (1) A selective inactivation, by the temperature treatment, of various functions of the electron-transport chain and of the F0F1 complex can be done. (2) The ATP synthesis activity of the F0F1 complex involves either a catalytic or a regulation subunit(s) which is not essential for ATP hydrolysis and the proton translocation. This subunit is 10 degrees C less stable than the hydrolytic site. Micromolar ADP stabilizes it from thermal denaturation by 4-5 degrees C, although ADP up to millimolar concentration does not protect the hydrolytic site and the proton-translocation site.(ABSTRACT TRUNCATED AT 400 WORDS)     

A switch in enantiomer preference between mitochondrial F1F0-ATPase chemotypes

The preferred absolute configuration of two series of F(1)F(0)-ATP synthase inhibitors was determined. Although the configuration of the active enantiomer in each series is different, each series presents the same 'triaryl' pharmacophore to the enzyme binding site.