Salt bridge as a gatekeeper against partial unfolding

Salt bridges are frequently observed in protein structures. Because the energetic contribution of salt bridges is strongly dependent on the environmental context, salt bridges are believed to contribute to the structural specificity rather than the stability. To test the role of salt bridges in enhancing structural specificity, we investigated the contribution of a salt bridge to the energetics of native‐state partial unfolding in a cysteine‐free version of Escherichia coli ribonuclease H (RNase H*). Thermolysin cleaves a protruding loop of RNase H^* through transient partial unfolding under native conditions. Lys86 and Asp108 in RNase H^* form a partially buried salt bridge that tethers the protruding loop. Investigation of the global stability of K86Q/D108N RNase H^* showed that the salt bridge does not significantly contribute to the global stability. However, K86Q/D108N RNase H^* is greatly more susceptible to proteolysis by thermolysin than wild‐type RNase H^* is. The free energy for partial unfolding determined by native‐state proteolysis indicates that the salt bridge significantly increases the energy for partial unfolding by destabilizing the partially unfolded form. Double mutant cycles with single and double mutations of the salt bridge suggest that the partially unfolded form is destabilized due to a significant decrease in the interaction energy between Lys86 and Asp108 upon partial unfolding. This study demonstrates that, even in the case that a salt bridge does not contribute to the global stability, the salt bridge may function as a gatekeeper against partial unfolding that disturbs the optimal geometry of the salt bridge.     

Subforaminal bridges in Hymenoptera (Insecta), with a focus on Chalcidoidea

Variation in structures of the posterior surface of the head in Hymenoptera is compared and interpreted according to theories of head capsule evolution, with focus on understanding previously baffling conditions in the superfamily Chalcidoidea. Features are investigated separately without first classifying subforaminal bridges into subcategories. In Proctotrupomorpha (including Chalcidoidea), Ceraphronoidea and some Ichneumonoidea, there are multiple posterior pits associated with the tentorium. In most examined Hymenoptera with a subforaminal bridge, there was a differentiated median area, typically with highly variable microtrichia. This area is elevated in Cephoidea and Pamphilioidea, but is not elevated in other Hymenoptera. Subforaminal bridges in Apocrita previously classified as hypostomal bridges are discussed in the context of A.P. Rasnitsyn's hypothesis that relative importance of adult feeding drives subforaminal bridge evolution.     

A newly introduced salt bridge cluster improves structural and biophysical properties of de novo TIM barrels

Protein stability can be fine‐tuned by modifying different structural features such as hydrogen‐bond networks, salt bridges, hydrophobic cores, or disulfide bridges. Among these, stabilization by salt bridges is a major challenge in protein design and engineering since their stabilizing effects show a high dependence on the structural environment in the protein, and therefore are difficult to predict and model. In this work, we explore the effects on structure and stability of an introduced salt bridge cluster in the context of three different de novo TIM barrels. The salt bridge variants exhibit similar thermostability in comparison with their parental designs but important differences in the conformational stability at 25°C can be observed such as a highly stabilizing effect for two of the proteins but a destabilizing effect to the third. Analysis of the formed geometries of the salt bridge cluster in the crystal structures show either highly ordered salt bridge clusters or only single salt bridges. Rosetta modeling of the salt bridge clusters results in a good prediction of the tendency on stability changes but not the geometries observed in the three‐dimensional structures. The results show that despite the similarities in protein fold, the salt bridge clusters differently influence the structural and stability properties of the de novo TIM barrel variants depending on the structural background where they are introduced.     

Formation of lamellar cross bridges in the annulus fibrosus of the intervertebral disc is a consequence of vascular regression

Cross bridges are radial structures within the highly organized lamellar structure of the annulus fibrosus of the intervertebral disc that connect two or more non-consecutive lamellae. Their origin and function are unknown. During fetal development, blood vessels penetrate deep within the AF and recede during postnatal growth. We hypothesized that cross bridges are the pathways left by these receding blood vessels.Initially, the presence of cross bridges was confirmed in cadaveric human discs aged 25 and 53 years. Next, L1-L2 intervertebral discs (n = 4) from sheep ranging in age from 75 days fetal gestation to adult were processed for paraffin histology. Mid-sagittal sections were immunostained for endothelial cell marker PECAM-1. The anterior and posterior AF were imaged using differential interference contrast microscopy, and the following parameters were quantified: total number of distinct lamellae, total number of cross bridges, percentage of cross bridges staining positive for PECAM-1, cross bridge penetration depth (% total lamellae), and PECAM-1 positive cross bridge penetration depth.Cross bridges were first observed at 100 days fetal gestation. The overall number peaked in neonates then remained relatively unchanged. The percentage of PECAM-1 positive cross bridges declined progressively from almost 100% at 100 days gestation to less than 10% in adults. Cross bridge penetration depth peaked in neonates then remained unchanged at subsequent ages. Depth of PECAM-1 positive cross bridges decreased progressively after birth. Findings were similar for both the anterior and posterior.The AF lamellar architecture is established early in development. It later becomes disrupted as a consequence of vascularization. Blood vessels then recede, perhaps due to increasing mechanical stresses in the surrounding matrix. In this study we present evidence that the pathways left by receding blood vessels remain as lamellar cross bridges. It is unclear whether the presence of cross bridges in the aging and degenerating intervertebral disc would be advantageous or detrimental, and this question should be addressed by future studies.     

Intra-Helical Salt Bridge Contribution to Membrane Protein Insertion

Salt bridges between negatively (D, E) and positively charged (K, R, H) amino acids play an important role in protein stabilization. This has a more prevalent effect in membrane proteins where polar amino acids are exposed to a hydrophobic environment. In transmembrane (TM) helices the presence of charged residues can hinder the insertion of the helices into the membrane. It is possible that the formation of salt bridges could decrease the cost of membrane integration. However, the presence of intra-helical salt bridges in TM domains and their effect on insertion has not been properly studied yet. In this work, we show that potentially salt-bridge forming pairs are statistically over-represented in TM-helices. We then selected some candidates to experimentally determine the contribution of these electrostatic interactions to the translocon-assisted membrane insertion process. Using both in vitro and whole cell systems, we confirm the presence of intra-helical salt bridges in TM segments during biogenesis and determined that they contribute ～0.5 kcal/mol to the apparent free energy of membrane insertion (ΔG_app). Our observations suggest that salt bridge interactions can be stabilized during translocon-mediated insertion and thus could be relevant to consider for the future development of membrane protein prediction software.     

Membrane interaction and disulphide-bridge formation in the unconventional secretion of Tau

Misfolded, pathological tau protein propagates from cell to cell causing neuronal degeneration in Alzheimer’s disease and other tauopathies. The molecular mechanisms of this process have remained elusive. Unconventional secretion of tau takes place via several different routes, including direct penetration through the plasma membrane. Here, we show that tau secretion requires membrane interaction via disulphide bridge formation. Mutating residues that reduce tau interaction with membranes or formation of disulphide bridges decrease both tau secretion from cells, and penetration through artificial lipid membranes. Our results demonstrate that tau is indeed able to penetrate protein-free membranes in a process independent of active cellular processes and that both membrane interaction and disulphide bridge formation are needed for this process. QUARK-based de novo modelling of the second and third microtubule-binding repeat domains (MTBDs), in which the two cysteine residues of 4R isoforms of tau are located, supports the concept that this region of tau could form transient amphipathic helices for membrane interaction.     

Relation between critical disk speed for foam-breaking of rotating-disk mechanical foam-breakers and foaming characteristics of solutions

For tower fermentors, i.e., bubble columns (BCs), treating various foaming liquids, the critical disk rotational speed N_c required for foam-breaking of rotating-disk mechanical foam-breakers (MFRDs) fitted to BCs was studied in relation to the foaming characteristics of the liquids. An empirical equation was presented for predicting N_c in foam-breaking regions. With this equation, it was found that prediction of N_c of MFRDs fitted to BCs treating various liquids was possible regardless of the type of foaming liquid or its concentration.     

Ribosomal Intersubunit Bridge B2a Is Involved in Factor-Dependent Translation Initiation and Translational Processivity

Intersubunit bridges are important for holding together subunits in the 70S ribosome. Moreover, a number of intersubunit bridges have a role in modulating the activity of the ribosome during translation. Ribosomal intersubunit bridge B2a is formed by the interaction between the conserved 23S rRNA helix-loop 69 (H69) and the top of the 16S rRNA helix 44. Within the 70S ribosome, bridge B2a contacts translation factors and the A-site tRNA. In addition to bridging the subunits, bridge B2a has been invoked in a number of other ribosomal functions from initiation to termination. In the present work, single-nucleotide substitutions were inserted at positions 1912 and 1919 of Escherichia coli 23S rRNA (helix 69), which are involved in important intrahelical and intersubunit tertiary interactions in bridge B2a. The resulting ribosomes had a severely reduced activity in a cell-free translation elongation assay, but displayed a nearly wild-type-level peptidyl transferase activity. In vitro reassociation efficiency decreased with all of the H69 variant 50S subunits, but was severest with the A1919C and ΔH69 variants. The mutations strongly affected initiation-factor-dependent 70S initiation complex formation, but exhibited a minor effect on the nonenzymatic initiation process. The mutations decreased ribosomal processivity in vitro and caused a progressive depletion of 50S subunits in polysomal fractions in vivo. Mutations at position 1919 decreased the stability of a dipeptidyl-tRNA in the A-site, whereas the binding of the dipeptidyl-tRNA was rendered more stable with 1912 and ΔH69 mutations. Our results suggest that the H69 of 23S rRNA functions as a control element during enzymatic steps of translation.     

Protein stabilization by salt bridges: concepts, experimental approaches and clarification of some misunderstandings

Salt bridges in proteins are bonds between oppositely charged residues that are sufficiently close to each other to experience electrostatic attraction. They contribute to protein structure and to the specificity of interaction of proteins with other biomolecules, but in doing so they need not necessarily increase a protein's free energy of unfolding. The net electrostatic free energy of a salt bridge can be partitioned into three components: charge-charge interactions, interactions of charges with permanent dipoles, and desolvation of charges. Energetically favorable Coulombic charge-charge interaction is opposed by often unfavorable desolvation of interacting charges. As a consequence, salt bridges may destabilize the structure of the folded protein. There are two ways to estimate the free energy contribution of salt bridges by experiment: the pK(a) approach and the mutation approach. In the pK(a) approach, the contribution of charges to the free energy of unfolding of a protein is obtained from the change of pK(a) of ionizable groups caused by altered electrostatic interactions upon folding of the protein. The pK(a) approach provides the relative free energy gained or lost when ionizable groups are being charged. In the mutation approach, the coupling free energy between interacting charges is obtained from a double mutant cycle. The coupling free energy is an indirect and approximate measure of the free energy of charge-charge interaction. Neither the pK(a) approach nor the mutation approach can provide the net free energy of a salt bridge. Currently, this is obtained only by computational methods which, however, are often prone to large uncertainties due to simplifying assumptions and insufficient structural information on which calculations are based. This state of affairs makes the precise thermodynamic quantification of salt bridge energies very difficult. This review is focused on concepts and on the assessment of experimental methods and does not cover the vast literature.     

Preliminary Studies on the Optimum Shape of Dental Bridges

Several pre-existing anterior and posterior dental bridge models using Finite elements and the new ceramic material In-Ceram have been developed. The mechanical behaviour of these models has been compared with optimised profiles obtained from a newly developed evolutionary algorithm known as Evolutionary Structural Optimisation (ESO).

The results show that the mechanical behaviour of the bridges was mainly restricted by the properties of the porcelain veneer and the design of the bridges themselves. For the case of the anterior bridge, it was found that there existed a specific thickness of veneer that minimised the maximum principal stress. This was related to peak stresses that occurred at the bridge surface. Peak stresses also occurred in the material interface between the In-Ceram and the veneer. These extreme stresses were attributed to the notch size and shape. For the case of the posterior bridge, it was concluded that the shape of the bottom of the Pontic tooth is crucial in reducing the magnitude of the maximum principal tensile stress. The ESO process produced bridge designs which have uniformly stressed bridge surfaces, and which also have significantly lower maximum principal tensile stresses compared to the pre-existing designs (up to 44%).     

Salt bridge interactions: Stability of the ionic and neutral complexes in the gas phase,in solution,and in proteins

A theoretical study on the stability of the salt bridges in the gas phase, in solution, and in the interior of proteins is presented. The study is mainly focused on the interaction between acetate and methylguanidinium ions, which were used as model compounds for the salt bridge between Asp (Glu) and Arg. Two different solvents (water and chloroform) were used to analyze the effect of varying the dielectric constant of the surrounding media on the salt bridge interaction. Calculations in protein environments were performed by using a set of selected protein crystal structures. In all cases attention was paid to the difference in stability between the ion pair and neutral hydrogen-bonded forms. Comparison of the results determined in the gas phase and in solution allows us to stress the large influence of the environment on the binding process, as well as on the relative stability between the ionic and neutral complexes. The high anisotropy of proteins and the local microenvironment in the interior of proteins make a decisive contribution in modulating the energetics of the salt bridge. In general, the formation of salt bridges in proteins is not particularly favored, with the ion pair structure being preferred over the interaction between neutral species. Proteins 32:67–79, 1998. © 1998 Wiley-Liss, Inc.     

Relationship between myocardial bridge compression severity and haemodynamic perturbations

Objectives: This study aims to examine the alteration in coronary haemodynamics with increasing the severity of vessel compression caused by myocardial bridging (MB).

Methods: Angiography and intravascular ultrasound were performed in 10 patients with MB with varying severities of systolic compression in the left anterior descending (LAD) artery. Computer models of MB were developed and transient computational fluid dynamics simulations were performed to derive distribution of blood residence time and shear stress.

Results: With increasing the severity of bridge compression, a decreasing trend was observed in the shear stress over proximal segment whereas an increasing trend was found in the shear stress over bridge segment. When patients were divided into 2 groups based on the average systolic vessel compression in the whole cohort (%CR_ave = 27.38), patients with bridges with major systolic compression (>%CR_ave) had smaller shear stress and higher residence time in the proximal segment compared to those with bridges with minor systolic compression (<%CR_ave) (0.37?±?0.23 vs 0.69?±?0.29?Pa and 0.0037?±?0.0069 vs 0.022?±?0.0094?s). In contrast, patients with bridges with major systolic compression had greater shear stress in the bridge segment compared to those with bridges with minor systolic compression (2.49?±?2.06 vs 1.13?±?0.89?Pa). No significant difference was found in the distal shear stress of patients with bridges with major and minor systolic compression.

Conclusion: Our findings revealed a direct relationship between the severity of systolic compression of MB and haemodynamic perturbations in the proximal segment such that the increased systolic vessel compression was associated with decreased shear stress and increased blood residence time.     

Homology modeling and molecular dynamics simulations of the N-terminal domain of wheat high molecular weight glutenin subunit 10

High molecular weight glutenin subunits (HMW-GS) are of a particular interest because of their biomechanical properties, which are important in many food systems such as breadmaking. Using fold-recognition techniques, we identified a fold compatible with the N-terminal domain of HMW-GS Dy10. This fold corresponds to the one adopted by proteins belonging to the cereal inhibitor family. Starting from three known protein structures of this family as templates, we built three models for the N-terminal domain of HMW-GS Dy10. We analyzed these models, and we propose a number of hypotheses regarding the N-terminal domain properties that can be tested experimentally. In particular, we discuss two possible ways of interaction between the N-terminal domains of the y-type HMW glutenin subunits. The first way consists in the creation of interchain disulfide bridges. According to our models, we propose two plausible scenarios: (1) the existence of an intrachain disulfide bridge between cysteines 22 and 44, leaving the three other cysteines free of engaging in intermolecular bonds; and (2) the creation of two intrachain disulfide bridges (involving cysteines 22-44 and cysteines 10-55), leaving a single cysteine (45) for creating an intermolecular disulfide bridge. We discuss these scenarios in relation to contradictory experimental results. The second way, although less likely, is nevertheless worth considering. There might exist a possibility for the N-terminal domain of Dy10, Nt-Dy10, to create oligomers, because homologous cereal inhibitor proteins are known to exist as monomers, homodimers, and heterooligomers. We also discuss, in relation to the function of the cereal inhibitor proteins, the possibility that this N-terminal domain has retained similar inhibitory functions.     

Revealing Dynamic Processes of Materials in Liquids Using Liquid Cell Transmission Electron Microscopy

The recent development for in situ transmission electron microscopy, which allows imaging through liquids with high spatial resolution, has attracted significant interests across the research fields of materials science, physics, chemistry and biology. The key enabling technology is a liquid cell. We fabricate liquid cells with thin viewing windows through a sequential microfabrication process, including silicon nitride membrane deposition, photolithographic patterning, wafer etching, cell bonding, etc. A liquid cell with the dimensions of a regular TEM grid can fit in any standard TEM sample holder. About 100 nanoliters reaction solution is loaded into the reservoirs and about 30 picoliters liquid is drawn into the viewing windows by capillary force. Subsequently, the cell is sealed and loaded into a microscope for in situ imaging. Inside the TEM, the electron beam goes through the thin liquid layer sandwiched between two silicon nitride membranes. Dynamic processes of nanoparticles in liquids, such as nucleation and growth of nanocrystals, diffusion and assembly of nanoparticles, etc., have been imaged in real time with sub-nanometer resolution. We have also applied this method to other research areas, e.g., imaging proteins in water. Liquid cell TEM is poised to play a major role in revealing dynamic processes of materials in their working environments. It may also bring high impact in the study of biological processes in their native environment.     

Haptoglobin in Carnivora: a unique molecular structure in bear, cat and dog haptoglobins

Haptoglobin (Hp), a hemoglobin-binding protein in plasma, consists of α and β subunits and has a tetra-chain arrangement (β-α-α-β) connected by disulfide bridges in most mammals so far examined. Dog Hp has been reported to be unique compared with other Hps in respect that (1) the two αβ units are joined by a non-covalent interaction rather than a disulfide bridge and (2) the α chain has an oligosaccharide-binding sequence (Asn-X-Ser/Thr) and is glycosylated. To determine whether the unique structures of dog Hp are common in the Carnivora, we purified Hps from sera of bear and cat, and analyzed their subunit structure and partial amino acid sequences. The analyses by gel filtration and sodium dodecyl sulfate-polyacrylamide gel electrophoresis, under both reducing and non-reducing conditions, revealed that bear and cat Hps have similar subunit arrangements to dog Hp, suggesting the absence of a disulfide bridge between two α chains. This was confirmed by amino acid sequence analysis of the α chains: that is, Cys₁₅ participating in the inter-α chain disulfide bridge was replaced by Val in bear or Leu in cat and dog. Thus, the unique subunit arrangement of Hp reported in dog may be common in the Carnivora. In contrast to dog Hp, however, α chains of bear and cat Hps were found not to have the typical oligosaccharide binding sequence on their α chains and were not glycosylated.     

A Comprehensive Alanine-Scanning Mutagenesis Study Reveals Roles for Salt Bridges in the Structure and Activity of Pseudomonas aeruginosa Elastase

The relationship between salt bridges and stability/enzymatic activity is unclear. We studied this relationship by systematic alanine-scanning mutation analysis using the typical M4 family metalloprotease Pseudomonas aeruginosa elastase (PAE, also known as pseudolysin) as a model. Structural analysis revealed seven salt bridges in the PAE structure. We constructed ten mutants for six salt bridges. Among these mutants, six (Asp189Ala, Arg179Ala, Asp201Ala, Arg205Ala, Arg245Ala and Glu249Ala) were active and four (Asp168Ala, Arg198Ala, Arg253Ala, and Arg279Ala) were inactive. Five mutants were purified, and their catalytic efficiencies (k _cat/K _m), half-lives (t _1/2) and thermal unfolding curves were compared with those of PAE. Mutants Asp189Ala and Arg179Ala both showed decreased thermal stabilities and increased activities, suggesting that the salt bridge Asp189-Arg179 stabilizes the protein at the expense of catalytic efficiency. In contrast, mutants Asp201Ala and Arg205Ala both showed slightly increased thermal stability and slightly decreased activity, suggesting that the salt bridge Asp201-Arg205 destabilizes the protein. Mutant Glu249Ala is related to a C-terminal salt bridge network and showed both decreased thermal stability and decreased activity. Furthermore, Glu249Ala showed a thermal unfolding curve with three discernable states [the native state (N), the partially unfolded state (I) and the unfolded state (U)]. In comparison, there were only two discernable states (N and U) in the thermal unfolding curve of PAE. These results suggest that Glu249 is important for catalytic efficiency, stability and unfolding cooperativity. This study represents a systematic mutational analyses of salt bridges in the model metalloprotease PAE and provides important insights into the structure-function relationship of enzymes.     

Contribution of Disulfide Bridges to the Thermostability of a Type A Feruloyl Esterase from Aspergillus usamii

The contribution of disulfide bridges to the thermostability of a type A feruloyl esterase (AuFaeA) from Aspergillus usamii E001 was studied by introducing an extra disulfide bridge or eliminating a native one from the enzyme. MODIP and DbD, two computational tools that can predict the possible disulfide bridges in proteins for thermostability improvement, and molecular dynamics (MD) simulations were used to design the extra disulfide bridge. One residue pair A126-N152 was chosen, and the respective amino acid residues were mutated to cysteine. The wild-type AuFaeA and its variants were expressed in Pichia pastoris GS115. The temperature optimum of the recombinant (re-) AuFaeA^A126C-N152C was increased by 6°C compared to that of re-AuFaeA. The thermal inactivation half-lives of re-AuFaeA^A126C-N152C at 55 and 60°C were 188 and 40 min, which were 12.5- and 10-folds longer than those of re-AuFaeA. The catalytic efficiency (k_cat/K_m) of re-AuFaeA^A126C-N152C was similar to that of re-AuFaeA. Additionally, after elimination of each native disulfide bridge in AuFaeA, a great decrease in expression level and at least 10°C decrease in thermal stability of recombinant AuEaeA variants were also observed.     

Cooperativity of complex salt bridges

The energetic contribution of complex salt bridges, in which one charged residue (anchor residue) forms salt bridges with two or more residues simultaneously, has been suggested to have importance for protein stability. Detailed analysis of the net energetics of complex salt bridge formation using double- and triple-mutant cycle analysis revealed conflicting results. In two cases, it was shown that complex salt bridge formation is cooperative, i.e., the net strength of the complex salt bridge is more than the sum of the energies of individual pairs. In one case, it was reported that complex salt bridge formation is anti-cooperative. To resolve these different findings, we performed analysis of the geometries of salt bridges in a representative set of structures from the PDB and found that over 87% of all complex salt bridges anchored by Arg/Lys have a geometry such that the angle formed by their Calpha atoms, Theta, is <90 degrees . This preferred geometry is observed in the two reported instances when the energetics of complex salt bridge formation is cooperative, while in the reported anti-cooperative complex salt bridge, Theta is close to 160 degrees . Based on these observations, we hypothesized that complex salt bridges are cooperative for Theta < 90 degrees and anti-cooperative for 90 degrees < Theta < 180 degrees . To provide a further experimental test for this hypothesis, we engineered a complex salt bridge with Theta = 150 degrees into a model protein, the activation domain of human procarboxypeptidase A2 (ADA2h). Experimentally derived stabilities of the ADA2h variants allowed us to show that the complex salt bridge in ADA2h is anti-cooperative.     

On the reactivity of the Melanocarpus albomyces laccase and formation of coniferyl alcohol dehydropolymer (DHP) in the presence of ionic liquid 1-allyl-3-methylimidazolium chloride

Some ionic liquids are able to dissolve wood, including lignin and lignocellulose, and thus they provide an efficient reaction media for modification of globally abundant wood-based polymers. Lignin can be modified with laccases (EC 1.10.3.2), multicopper oxidases, which selectively catalyze the oxidation of phenolic hydroxyl to the phenoxy radical in lignin by using oxygen as the co-substrate and an electron acceptor. Many enzymes, including laccases, retain their catalytic activity in the presence of ionic liquids. However, the enzyme activity is usually decreased in the presence of ionic liquids, and the most deactivating ionic liquids have been observed to be those dissolving wood most efficiently. In the present study the activity, pH optimum and catalyzed oxidation of coniferyl alcohol by the laccase from the ascomycete Melanocarpus albomyces was investigated in the ionic liquid 1-allyl-3-methyl-imidazolium chloride ([Amim]Cl), known to dissolve wood and expected to affect the laccase activity. Indeed, with an increasing concentration of [Amim]Cl, the activity of M. albomyces laccase decreased, and the pH range of the enzyme activity was narrowed. The pH optimum, using 2,6-dimethoxyphenol as the substrate, was shifted from 6.5 to 6.0 when the amount of [Amim]Cl was increased to 60% (m-%). It was also found that the inhibition of laccase with NaN₃ was not as severe in the ionic liquid as in water. The insoluble fraction of the dehydropolymer (DHP) formed in the presence of [Amim]Cl had clearly higher molecular weight compared to the one formed in water. DHPs formed in the absence and presence of [Amim]Cl both contained β-5, β–β, β-O-4, α-CO/β-O-4 and α-O-4/β-O-4 structures. However, in the presence of [Amim]Cl, less β-O-4, slightly less β-5 and more β–β structures were formed.     

Fabrication and Visualization of Capillary Bridges in Slit Pore Geometry

A procedure for creating and imaging capillary bridges in slit-pore geometry is presented. High aspect ratio hydrophobic pillars are fabricated and functionalized to render their top surfaces hydrophilic. The combination of a physical feature (the pillar) with a chemical boundary (the hydrophilic film on the top of the pillar) provides both a physical and chemical heterogeneity that pins the triple contact line, a necessary feature to create stable long but narrow capillary bridges. The substrates with the pillars are attached to glass slides and secured into custom holders. The holders are then mounted onto four axis microstages and positioned such that the pillars are parallel and facing each other. The capillary bridges are formed by introducing a fluid in the gap between the two substrates once the separation between the facing pillars has been reduced to a few hundred micrometers. The custom microstage is then employed to vary the height of the capillary bridge. A CCD camera is positioned to image either the length or the width of the capillary bridge to characterize the morphology of the fluid interface. Pillars with widths down to 250 µm and lengths up to 70 mm were fabricated with this method, leading to capillary bridges with aspect ratios (length/width) of over 100¹.