Regenerative Potential of Blood-Derived Products in 3D Osteoarthritic Chondrocyte Culture System

Intra-articular injection of different types of blood-derived products is gaining popularity and clinical importance in the treatment of degenerative cartilage disorders such as osteoarthritis. The regenerative potential of two types of platelet-rich plasma (PRP), prepared in the presence of EDTA (EPRP) and citrate (CPRP) and an alternative blood product-hyperacute serum (hypACT) was evaluated using a 3D osteoarthritic chondrocyte pellet model by assessing the metabolic cell activity, cartilage-related gene expression and extracellular matrix deposition within the pellets. Chondrocyte viability was determined by XTT assay and it revealed no significant difference in metabolic activity of OA chondrocyte pellets after supplementation with different blood products. Nevertheless, the selection of blood products influenced the cartilage-related genes expression, ECM morphology and the tissue quality of pellets. Both PRP types had a different biological effect depending upon concentration and even though CPRP is widely used in clinics our assessment did not reveal good results in gene expression either tissue quality. HypACT supplementation resulted in superior cartilage-related genes expression together with tissue quality and seemed to be the most stable product since no remarkable changes were observed between the two different concentrations. All in all, for successful regenerative therapy, possible molecular mechanisms induced by blood-derived products should be always carefully investigated and adapted to the specific medical indications.     

Role of the blood service in cellular therapy

Cellular therapy is a novel form of medical or surgical treatment using cells in place of or in addition to traditional chemical drugs. The preparation of cellular products - called advanced therapy medicinal products - ATMP in Europe, requires compliance with good manufacturing practices (GMP). Based on long-term experience in blood component manufacturing, product traceability and hemovigilance, selected blood services may represent ideal settings for the development and experimental use of ATMP. International harmonization of the protocols and procedures for the preparation of ATMP is of paramount importance to facilitate the development of multicenter clinical trials with adequate sample size, which are urgently needed to determine the clinical efficacy of ATMP. This article describes European regulations on cellular therapy and summarizes the activities of the 'Franco Calori' Cell Factory, a GMP unit belonging to the department of regenerative medicine of a large public university hospital, which acquired a certification for the GMP production of ATMP in 2007 and developed nine experimental clinical protocols during 2003-2011.     

Scale-down model qualification of ambr® 250 high-throughput mini-bioreactor system for two commercial-scale mAb processes

Recent advances in high-throughput (HTP) automated mini-bioreactor systems have significantly improved development timelines for early-stage biologic programs. Automated platforms such as the ambr® 250 have demonstrated the ability, using appropriate scale-down approaches, to provide reliable estimates of process performance and product quality from bench to pilot scale, but data sets comparing to large-scale commercial processes (>10,000 L) are limited. As development moves toward late stages, specifically process characterization (PC), a qualified scale-down model (SDM) of the commercial process is a regulatory requirement as part of Biologics License Application (BLA)-enabling activities. This work demonstrates the qualification of the ambr® 250 as a representative SDM for two monoclonal antibody (mAb) commercial processes at scales >10,000 L. Representative process performance and product quality associated with each mAb were achieved using appropriate scale-down approaches, and special attention was paid to pCO₂ to ensure consistent performance and product quality. Principal component analysis (PCA) and univariate equivalence testing were utilized in the qualification of the SDM, along with a statistical evaluation of process performance and product-quality attributes for comparability. The ambr® 250 can predict these two commercial-scale processes (at center-point condition) for cell-culture performance and product quality. The time savings and resource advantages to performing PC studies in a small-scale HTP system improves the potential for the biopharmaceutical industry to get products to patients more quickly.     

Comparison of the effect of calcium gluconate and batroxobin on the release of transforming growth factor beta 1 in canine platelet concentrates

ABSTRACT: BACKGROUND: The clinical use of autologous platelet concentrates (also known as platelet-rich plasma) on the field of regenerative therapy, in the last decade has been the subject of several studies especially in equine medicine and surgery. The objectives of this study was: 1) to describe and compare the cellular population in whole blood, lower fraction (A) and upper fraction (B) of platelet concentrates, 2) to measure and compare the transforming growth factor beta 1 (TGF-beta1) concentration in plasma and both platelet concentrates after be activated with calcium gluconate or batroxobin plus calcium gluconate and, 3) to determine correlations between cell counts in platelet concentrates and concentrations of TGF-beta1. Blood samples were taken from 16 dogs for complete blood count, plasma collection and platelet concentrates preparation. The platelet concentrates (PC) were arbitrarily divided into two fractions, specifically, PC-A (lower fraction) and PC-B (upper fraction). The Platelet concentrates were analyzed by hemogram. After activated with calcium gluconate or batroxobin plus calcium gluconate, TGF-beta1 concentration was determined in supernatants of platelet concentrates and plasma. RESULTS: There were differences statistically significant (P < 0.05) for the platelet count and leukocyte count and TGF-beta1 concentration between whole blood, plasma and both platelet concentrates. A significant correlation was found between the number of platelets in both platelet concentrates and TGF-beta1 concentration. Platelet collection efficiency was 46.34% and 28.16% for PC-A and PC-B, respectively. TGF-beta1 concentration efficiency for PC activated with calcium gluconate was 47.75% and 31.77%, for PC-A and PC-B, respectively. PC activated with batroxobin plus CG showed 46.87% and 32.24% for PC-A and PC-B, respectively. CONCLUSIONS: The methodology used in this study allows the concentration of a number of platelets and TGF-beta1 that might be acceptable for a biological effect for clinical or experimental use as a regenerative therapy in dogs.     

Management of externally manufactured cell therapy products: the Mayo Clinic approach

BackgroundThe rise of investigative and commercially available cell therapy products adds a new dynamic to academic medical centers; that is, the management of patient-specific cell products. The scope of cell therapy has rapidly expanded beyond in-house collection and infusion of cell products such as bone marrow and peripheral blood transplant. The complexities and volumes of cell therapies are likely to continue to become more demanding. As patient-specific “living drugs,” cell therapy products typically require material collection, product provenance, transportation and maintenance of critical quality attributes, including temperature and expiration dates. These requirements are complicated by variations in product-specific attributes, reporting requirements and interactions with industry not required of typical pharmaceuticals.MethodsTo manage these requirements, the authors set out to establish a framework within the Immune, Progenitor and Cell Therapeutics Lab, the Current Good Manufacturing Practice facility responsible for cell manufacturing at Mayo Clinic Rochester housed within the Division of Transfusion Medicine. The authors created a work unit (biopharmaceutical unit) dedicated to addressing the specialized procedures required to properly handle these living drugs from collection to delivery and housing the necessary processes to more easily integrate externally manufactured cell therapies into clinical practice.ResultsThe result is a clear set of expectations defined for each step of the process, with logical documentation of critical steps that are concise and easy to follow.ConclusionsThe authors believe this system is scalable for addressing the promised growth of cell therapy products well into the future. Here the authors describe this system and provide a framework that could be used by other centers to manage these important new therapies.     

Platelet-rich plasma vs bone marrow aspirate concentrate: An overview of mechanisms of action and orthobiologic synergistic effects

The use of orthobiologics as a novel therapy for the treatment of numerous musculoskeletal disorders has increased considerably over the past decade.Currently,there are multiple alternatives available as suitable treatments;however,the use of autologous blood-derived products such as platelet-rich plasma(PRP),bone marrow aspirate(BMA)and BMA concentrate(BMAC),specifically,is expanding.Although many investigations attempted to demonstrate the effectiveness of these therapies,even with positive results,the literature lacks standardized protocols and overall accuracy in study designs,which leads to variance and difficulty in reproducibility of protocols.The efficacy of PRP for the treatment of cartilage,bone and muscle tissues is well known.Although BMAC has generated optimistic results for the same purposes,its applicability in clinical trials is still relatively recent when compared to PRP.Both products demonstrate the potential to set forth reparative processes,each in their own distinct mechanism.The combination of these biological products has been previously proposed,yet little is known about their synergism.Evidence indicates that growth factor,cytokine,and chemokine profiles seen in both PRP and BMAC vary but are likely to work synergistically to enhance musculoskeletal healing.BMAC products seem to work well without PRP;however,the addition of PRP to BMAC has been shown to act as a rich and natural source of culture medium for stem cells located either peripherally or in the bone marrow itself.Nevertheless,additional variables associated with the use of BMAC and PRP in orthopedics must be further evaluated in order to consolidate the efficacy of this therapeutic strategy.     

Multicenter cell processing for cardiovascular regenerative medicine applications: the Cardiovascular Cell Therapy Research Network (CCTRN) experience

Background aimsMulticenter cellular therapy clinical trials require the establishment and implementation of standardized cell-processing protocols and associated quality control (QC) mechanisms. The aims here were to develop such an infrastructure in support of the Cardiovascular Cell Therapy Research Network (CCTRN) and to report on the results of processing for the first 60 patients.MethodsStandardized cell preparations, consisting of autologous bone marrow (BM) mononuclear cells, prepared using a Sepax device, were manufactured at each of the five processing facilities that supported the clinical treatment centers. Processing staff underwent centralized training that included proficiency evaluation. Quality was subsequently monitored by a central QC program that included product evaluation by the CCTRN biorepositories.ResultsData from the first 60 procedures demonstrated that uniform products, that met all release criteria, could be manufactured at all five sites within 7 h of receipt of BM. Uniformity was facilitated by use of automated systems (the Sepax for processing and the Endosafe device for endotoxin testing), standardized procedures and centralized QC.ConclusionsComplex multicenter cell therapy and regenerative medicine protocols can, where necessary, successfully utilize local processing facilities once an effective infrastructure is in place to provide training and QC.     

富血小板血浆在脊柱脊髓损伤治疗中的应用进展

富血小板血浆是近些年来比较热门的一种血液制品,其来源于自体,且制备方法简单,又富含大量血小板及多种生长因子,能够加速骨愈合,增强骨再生,促进软组织及神经损伤恢复,因此得到了广泛的关注。国内外的研究人员根据富血小板血浆所具有的特点,针对各个方面对其进行了大量的研究实验,并且在临床骨科疾病的治疗中也已经开始了实验性应用,如骨缺损、骨再生,肌腱、韧带及软组织损伤,脊柱脊髓损伤等。尤其是在脊柱脊髓损伤的治疗方面,无论是单独应用富血小板血浆治疗,还是联合应用富血小板血浆与脊髓神经前体细胞、骨髓间充质干细胞等有利于脊髓神经损伤恢复的细胞因子复合物共同治疗,均取得了突破性的进展,为研究脊柱脊髓损伤的治疗提供了新的方向。     

The academic medical centre: an idea whose time has come.

Interdependence of faculties of medicine or health sciences and teaching hospitals is central to the academic medical centre''s three "products": education, research and clinical service. Whether a voluntary association, partnership, joint venture or single entity, the strength of the association of member institutions must lie in mutual dependency. With the potential of reducing costs and increasing effectiveness through administrative efficiency and rationalization, especially of planning and setting priorities, the academic medical centre can outstrip its individual member institutions in contributing to the solution of Canada''s present and future challenges in health care.     

ISCT survey on hospital practices to support externally manufactured investigational cell-gene therapy products

There is considerable interest in the next generation of personalized medicine, especially cell and gene therapy products such as chimeric antigen receptor T cells (CAR-Ts). Unlike other small molecules or pharmacologic drugs, most existing cell or cell-based gene therapy products (CGTs) require apheresis collection of the patient or donor, subsequent manufacture of the product, and final shipment of the product to the clinical site for infusion. Whereas traditional pharmaceutical drugs have involved the drug sponsor and the clinical site and clinical pharmacy, this new manufacturing paradigm has evolved, in many cases, to include an apheresis center, a cell processing lab, the sponsor's manufacturing facility, and a clinical site with or without a pharmacy. Here we report the results of a survey of current practices handling investigational CGTs conducted by the Immuno-Gene Therapy committee of the International Society of Cell and Gene Therapy.     

Platelet sonicates activate hair follicle stem cells and mediate enhanced hair follicle regeneration

An increasing number of studies show that platelet‐rich plasma (PRP) is effective for androgenic alopecia (AGA). However, the underlying cellular and molecular mechanisms along with its effect on hair follicle stem cells are poorly understood. In this study, we designed to induce platelets in PRP to release factors by calcium chloride (PC) or by sonication where platelet lysates (PS) or the supernatants of platelet lysate (PSS) were used to evaluate their effect on the hair follicle activation and regeneration. We found that PSS and PS exhibited a superior effect in activating telogen hair follicles than PC. In addition, PSS injection into the skin activated quiescent hair follicles and induced K15⁺ hair follicle stem cell proliferation in K14‐H2B‐GFP mice. Moreover, PSS promoted skin‐derived precursor (SKP) survival in vitro and enhanced hair follicle formation in vivo. In consistence, protein array analysis of different PRP preparations revealed that PSS contained higher levels of 16 growth factors (out of 41 factors analysed) than PC, many of them have been known to promote hair follicle regeneration. Thus, our data indicate that sonicated PRP promotes hair follicle stem cell activation and de novo hair follicle regeneration.     

Chemically controlled aggregation of pluripotent stem cells

Heterogeneity in pluripotent stem cell (PSC) aggregation leads to variability in mass transfer and signaling gradients between aggregates, which results in heterogeneous differentiation and therefore variability in product quality and yield. We have characterized a chemical‐based method to control aggregate size within a specific, tunable range with low heterogeneity, thereby reducing process variability in PSC expansion. This method enables controlled, scalable, stirred suspension‐based manufacturing of PSC cultures that are critical for the translation of regenerative medicine strategies to clinical products.     

International blood collection and storage: Clinical use of blood products

Human blood transfusion is the process of transferring blood or blood-based products from an individual into the circulatory system of another. From the theory of circulation of blood to the early practice of blood transfusion, transfusion medicine has been an important concept for many centuries. The practicality of transfusion, however, only became a possibility during and shortly after the Second World War. Today, blood and its derivatives play a critical role in worldwide health care systems, with blood components having direct clinical indications. Over the past several years worldwide organizations including the World Health Organization (WHO) have made a number of substantial improvements to the regulation of the worlds blood supply. This continuous supply plays a critical role throughout health care systems worldwide, with procedures for blood collection, processing, and storage now complex, standardised processes. As the areas of clinical validation of different disease states from blood-derived sources (i.e., disease biomarkers) move towards validation stages, the importance of controlled- and standardised-protocols is imperative.     

A method for rapid mapping of mutations by plasmid rescue strategy inSaccharomyces cerevisiae

The products ofPRP17 andPRP18 genes are required for the second step of pre-mRNA splicing reactions inSaccharomyces cerevisiae. Temperature-sensitive mutants at either of these loci accumulate products of the first splicing reaction at nonpermissive temperature. To characterize functional regions in these proteins the mutations in three temperature-sensitive alleles ofPRP17 and two temperature-sensitive alleles ofPRP18 were mapped by the plasmid rescue strategy, One of the procedures adopted in the past is plasmid rescue of the mutant allele followed by sequencing of the entire gene. In this work we describe an adaptation of the above procedure that allows, first, rapid mapping of chromosomal segments bearing the mutations, followed by sequence characterization of the minimal segment. The strategy adopted was to integrate a wild-type copy of the gene at the homologous mutant chromosomal locus, followed by recovery of the chromosomal fragments from these integrants as plasmids inE. coli. The recovered plasmids were screened by a complementation assay for those that contained in them the chromosomal mutation. The mutations in all the three alleles ofPRP17 map to a small region in the N-terminal half of the protein, whereas the temperature-sensitive mutations in the two alleles ofPRP18 map to different regions of the PRP18 protein. The recovered mutant plasmids from all five alleles at the two loci were sequenced and the nucleotide changes were found to result in missense mutations in each case. Our strategy is therefore a rapid method to map chromosomal mutations and is of general use in structure-function analysis of cloned genes.     

Therapeutic bacteriophages as a rescue treatment for drug-resistant infections – an in vivo studies overview

Bacteriophages, highly prevalent in all environments, have found their use in medicine as an alternative or complement to antibiotics. The therapeutic use of bacteriophages was particularly popular in the 1920s and 1930s, until the discovery and introduction of antibiotics. Due to the dynamic growth of antibiotic resistance among bacterial strains, numerous international institutions (such as the FDA) have declared the search for novel treatment modalities to be of the highest priority. To date, bacteriophage therapy has not been registered for general use in Western countries. The regulation of biological medicinal products (within medicinal product regulation) does not contain a specific documentation frame for bacteriophages (only for vaccines, blood derived products, etc.) which, as active substances, need to meet specific requirements. Recently, the FDA allowed bacteriophage therapy to be used in the United States, via the Emergency Investigational New Drug scheme; clinical trials to compare the safety and efficacy of bacteriophage therapy are also permitted. To date, several therapeutic products of this type have made it to phase I or II; some clinical programmes have also been completed. This article cites numerous animal model studies and registered clinical trials, showing the safety and effectiveness of bacteriophage therapy, including infections caused by bacterial strains resistant to antibiotic treatment.     

人胚胎干细胞培养系统的研究进展

人胚胎干细胞（hESC）具有永久的自我更新和多潜能分化能力,可在一定条件下定向分化为三个胚层的各种细胞。这些特性使其在再生医学（细胞治疗）、药物筛选及早期胚胎发育研究中具有重要的应用前景;但人胚胎干细胞培养系统中大量的动物源性物质和复杂的未知成份大大阻碍了其医学应用价值,所以建立一个没有动物源物质、成份确定的人胚胎干细胞培养系统足非常重要的。本文简要介绍了为适应hESC临床应用和基础研究的需要,改良其培养系统的研究进展。     

Stem cell culture engineering - process scale up and beyond

Advances in stem cell research and recent work on clinical trials employing stem cells have heightened the prospect of stem cell applications in regenerative medicine. The eventual clinical application of stem cells will require transforming cell production from laboratory practices to robust processes. Most stem cell applications will require extensive ex vivo handling of cells, from isolation, cultivation, and directed differentiation to product cell separation, cell derivation, and final formulation. Some applications require large quantities of cells in each defined batch for clinical use in multiple patients; others may be for autologous use and require only small-scale operations. All share a common requirement: the production must be robust and generate cell products of consistent quality. Unlike the established manufacturing process of recombinant protein biologics, stem cell applications will likely see greater variability in their cell source and more fluctuations in product quality. Nevertheless, in devising stem cell-based bioprocesses, much insight could be gained from the manufacturing of biological materials, including recombinant proteins and anti-viral vaccines. The key to process robustness is thus not only the control of traditional process chemical and physical variables, but also the sustenance of cells in the desired potency or differentiation state through controlling non-traditional variables, such as signaling pathway modulators.     

Compliance and cost control for cryopreservation of cellular starting materials: An industry perspective

Over the last decade, cancer immunotherapy has progressed from an academically interesting field to one of the most promising forms of new treatments in which not the cancer but the immune system is treated. In particular, genetic modification for purposeful redirection of autologous T cells is providing hope to many treatment-resistant patients. This personalized form of medicine is radically different from more traditional oncologic drugs. With these evolving medical advancements and more cellular therapies becoming available, some regulatory agencies have created new regulatory requirements to manage the production of these types of products. The regulations are specifically suited for the manufacture of gene and cell therapy products, as they use a risk-based approach towards product development and manufacturing, when there is limited characterization available. The correct interpretation of how and when requirements apply is crucial, since theoretical approaches to implementing GMP can easily lead to disproportionate and unwarranted restrictions that may not address the specific risks that regulators were intending to control. This is especially relevant for cell collection and biopreservation preceding the manufacturing process for products manufactured from autologous T cells. Both the fresh and cryopreserved apheresis materials can be filed as minimally manipulated starting materials to the authorities. The preservation of such cellular material can then routinely be managed using the available regulations for tissues and cells, allowing for a more fit-for-purpose approach to the control measures implemented.     

Oxidative stress implication in a new ex-vivo cardiac concordant xenotransplantation model

Xenotransplantation (XT) reveals a growing interest for the treatment of cardiomyopathy. The major barrier is an acute vascular rejection due to an acute humoral rejection. This pathogenesis is a difficult issue and in order to elaborate means for its prevention, we analysed the implication of oxidative stress (OS) on hearts from mini-pigs followed by reperfusion with either autologous or human blood in an attempt to simulate xenotransplantation.

About 14 hearts were studied after a Langendorff blood reperfusion: allografts with autologous blood (n = 7) or xenografts with human blood (n = 7). Blood samples were drawn from the coronary sinus to assess ischemia and OS.

In xenografts, arrhythmias occurred more frequently (p < 0.01, left ventricular systolic pressure decreased more significantly (p < 0.05), thiobarbituric acid-reactive substances concentrations increased at 30 min (0.7 ± 0.1 vs. 2.4 ± 0.3 mmol/l; p < 0.05) while vitamin A levels decreased (p < 0.05).

XT was associated with a significant increase in ischemic injury and OS production. OS might play an eminent role in hyperacute humoral rejection.