Efficient RNA-targeting by the introduction of aromatic stacking in the duplex major groove via 5-(1-phenyl-1,2,3-triazol-4-yl)-2′-deoxyuridines

Three pyrimidine nucleosides with differently substituted phenyltriazoles attached to the 5-position were prepared by Cu(I)-assisted azide–alkyne cycloadditions (CuAAC) and incorporated into oligonucleotides. Efficient π–π-stacking between two or more phenyltriazoles in the major groove was found to increase the thermal stability of a DNA:RNA duplex significantly. The best stacking, and most stable duplex, was obtained by a sulfonamide substituted derivative.     

Oligonucleotide-minor groove binder conjugates and their complexes with complementary DNA: effect of conjugate structural factors on the thermal stability of duplexes

Synthetic polycarboxamide minor groove binders (MGB) consisting of N-methylpyrrole (Py), N-methylimidazole (Im), N-methyl-3-hydroxypyrrole (Hp) and beta-alanine (beta) show strong and sequence-specific interaction with the DNA minor groove in side-by-side antiparallel or parallel orientation. Two MGB moieties covalently linked to the same terminal phosphate of one DNA strand stabilize DNA duplexes formed by this strand with a complementary one in a sequence-specific manner, similarly to the corresponding mono-conjugated hairpin structures. The series of conjugates with the general formula Oligo-(L-MGB-R)m was synthesized, where m = 1 or 2, L = linker, R = terminal charged or neutral group, MGB = -(Py)n-, -(Im)n- or -[(Py/Im)n-(CH2)3CONH-(Py/Im)n-] and I < n < 5. Using thermal denaturation, we studied effects of structural factors such as m and n, linker L length, nature and orientation of the MGB monomers, the group R and the backbone (DNA or RNA), etc. on the stability of the duplexes. Structural factors are more important for linear and hairpin monophosphoroamidates than for parallel bis-phosphoroamidates. No more than two oligocarboxamide strands can be inserted into the duplex minor groove. Attachment of the second sequence-specific parallel ligand [-L(Py)4R] to monophosphoroamidate conjugate CGTTTATT-L(Py)4R leads to the increase of the duplex Tm, whereas attachment of [-L(Im)4R] leads to its decrease. The mode of interaction between oligonucleotide duplex and attached ligands could be different (stacking with the terminal A:T pair of the duplex or its insertion into the minor groove) depending on the length and structure of the MGB.     

Recognition of RNA duplex by a neomycin–Hoechst 33258 conjugate

DNA minor groove binding drugs such as Hoechst 33258 have been shown to bind to a number of RNA structures. Similarly, RNA binding ligands such as neomycin have been shown by us to bind to a number of A-form DNA structures. A neomycin–Hoechst 33258 conjugate was recently shown to bind B-DNA, where Hoechst exhibits high affinity for the minor groove of A/T tract DNA and neomycin docks into the major groove. Further studies now indicate that the Hoechst moiety of the conjugate can be driven to bind RNA duplex as a consequence of neomycin binding in the RNA major groove. This is the first example of Hoechst 33258 binding to RNA duplex not containing bulges or loop motifs.     

Solution structure and stability of the DNA undecamer duplexes containing oxanine mismatch

Solution structures of DNA duplexes containing oxanine (Oxa, O) opposite a cytosine (O:C duplex) and opposite a thymine (O:T duplex) have been solved by the combined use of (1)H NMR and restrained molecular dynamics calculation. One mismatch pair was introduced into the center of the 11-mer duplex of [d(GTGACO(6)CACTG)/d(CAGTGX(17)GTCAC), X = C or T]. (1)H NMR chemical shifts and nuclear Overhauser enhancement (NOE) intensities indicate that both the duplexes adopt an overall right-handed B-type conformation. Exchangeable resonances of C(17) 4-amino proton of the O:C duplex and of T(17) imino proton of O:T duplex showed unusual chemical shifts, and disappeared with temperature increasing up to 30 °C, although the melting temperatures were >50 °C. The O:C mismatch takes a wobble geometry with positive shear parameter where the Oxa ring shifted toward the major groove and the paired C(17) toward the minor groove, while, in the O:T mismatch pair with the negative shear, the Oxa ring slightly shifted toward the minor groove and the paired T(17) toward the major groove. The Oxa mismatch pairs can be wobbled largely because of no hydrogen bond to the O1 position of the Oxa base, and may occupy positions in the strands that optimize the stacking with adjacent bases.     

Double helix conformation, groove dimensions and ligand binding potential of a G/C stretch in B-DNA.

The self-complementary DNA fragment CCGGCGCCGG crystallizes in the rhombohedral space group R3 with unit cell parameters a = 54.07 A and c = 44.59 A. The structure has been determined by X-ray diffraction methods at 2.2 A resolution and refined to an R value of 16.7%. In the crystal, the decamer forms B-DNA double helices with characteristic groove dimensions: compared with B-DNA of random sequence, the minor groove is wide and deep and the major groove is rather shallow. Local base pair geometries and stacking patterns are within the range commonly observed in B-DNA crystal structures. The duplex bears no resemblance to A-form DNA as might have been expected for a sequence with only GC base pairs. The shallow major groove permits an unusual crystal packing pattern with several direct intermolecular hydrogen bonds between phosphate oxygens and cytosine amino groups. In addition, decameric duplexes form quasi-infinite double helices in the crystal by end-to-end stacking. The groove geometries and accessibilities of this molecule as observed in the crystal may be important for the mode of binding of both proteins and drug molecules to G/C stretches in DNA.     

Mechanical Properties of Base-Modified DNA Are Not Strictly Determined by Base Stacking or Electrostatic Interactions

This work probes the mystery of what balance of forces creates the extraordinary mechanical stiffness of DNA to bending and twisting. Here we explore the relationship between base stacking, functional group occupancy of the DNA minor and major grooves, and DNA mechanical properties. We study double-helical DNA molecules substituting either inosine for guanosine or 2,6-diaminopurine for adenine. These DNA variants, respectively, remove or add an amino group from the DNA minor groove, with corresponding changes in hydrogen-bonding and base stacking energy. Using the techniques of ligase-catalyzed cyclization kinetics, atomic force microscopy, and force spectroscopy with optical tweezers, we show that these DNA variants have bending persistence lengths within the range of values reported for sequence-dependent variation of the natural DNA bases. Comparison with seven additional DNA variants that modify the DNA major groove reveals that DNA bending stiffness is not correlated with base stacking energy or groove occupancy. Data from circular dichroism spectroscopy indicate that base analog substitution can alter DNA helical geometry, suggesting a complex relationship among base stacking, groove occupancy, helical structure, and DNA bend stiffness.     

Oligonucleotide–Minor Groove Binder Conjugates and Their Complexes with Complementary DNA: Effect of Conjugate Structural Factors on the Thermal Stability of Duplexes

Synthetic polycarboxamide minor groove binders (MGB) consisting of N‐methylpyrrole (Py), N‐methylimidazole (Im), N‐methyl‐3‐hydroxypyrrole (Hp) and β‐alanine (β) show strong and sequence‐specific interaction with the DNA minor groove in side‐by‐side antiparallel or parallel orientation. Two MGB moieties covalently linked to the same terminal phosphate of one DNA strand stabilize DNA duplexes formed by this strand with a complementary one in a sequence‐specific manner, similarly to the corresponding mono‐conjugated hairpin structures. The series of conjugates with the general formula Oligo‐(L‐MGB‐R)_m was synthesized, where m = 1 or 2, L = linker, R = terminal charged or neutral group, MGB = –(Py)_n–, –(Im)_n– or –[(Py/Im)_n–(CH₂)₃CONH–(Py/Im)_n–] and 1 < n < 5. Using thermal denaturation, we studied effects of structural factors such as m and n, linker L length, nature and orientation of the MGB monomers, the group R and the backbone (DNA or RNA), etc. on the stability of the duplexes. Structural factors are more important for linear and hairpin monophosphoroamidates than for parallel bis‐phosphoroamidates. No more than two oligocarboxamide strands can be inserted into the duplex minor groove. Attachment of the second sequence‐specific parallel ligand [–L(Py)₄R] to monophosphoroamidate conjugate CGTTTATT–L(Py)₄R leads to the increase of the duplex Tm, whereas attachment of [–L(Im)₄R] leads to its decrease. The mode of interaction between oligonucleotide duplex and attached ligands could be different (stacking with the terminal A:T pair of the duplex or its insertion into the minor groove) depending on the length and structure of the MGB.     

Mechanical Properties of Base-Modified DNA Are Not Strictly Determined by Base Stacking or Electrostatic Interactions

This work probes the mystery of what balance of forces creates the extraordinary mechanical stiffness of DNA to bending and twisting. Here we explore the relationship between base stacking, functional group occupancy of the DNA minor and major grooves, and DNA mechanical properties. We study double-helical DNA molecules substituting either inosine for guanosine or 2,6-diaminopurine for adenine. These DNA variants, respectively, remove or add an amino group from the DNA minor groove, with corresponding changes in hydrogen-bonding and base stacking energy. Using the techniques of ligase-catalyzed cyclization kinetics, atomic force microscopy, and force spectroscopy with optical tweezers, we show that these DNA variants have bending persistence lengths within the range of values reported for sequence-dependent variation of the natural DNA bases. Comparison with seven additional DNA variants that modify the DNA major groove reveals that DNA bending stiffness is not correlated with base stacking energy or groove occupancy. Data from circular dichroism spectroscopy indicate that base analog substitution can alter DNA helical geometry, suggesting a complex relationship among base stacking, groove occupancy, helical structure, and DNA bend stiffness.     

Alpha-LNA (alpha-D-configured locked nucleic acid)

Two pyrimidine alpha-LNA nucleoside monomers have been synthesised and incorporated into alpha-configured oligonucleotides. A fully modified mixed alpha-LNA sequence displays unprecedented parallel stranded hybridisation with complementary RNA and a remarkable selectivity for RNA over DNA. Modelling shows alpha-LNA:RNA to form an extended duplex with a very broad major groove.     

Spermine Condenses DNA,but Not RNA Duplexes

Interactions between the polyamine spermine and nucleic acids drive important cellular processes. Spermine condenses DNA and some RNAs, such as poly(rA):poly(rU). A large fraction of the spermine present in cells is bound to RNA but apparently does not condense it. Here, we study the effect of spermine binding to short duplex RNA and DNA, and compare our findings with predictions of molecular-dynamics simulations. When small numbers of spermine are introduced, RNA with a designed sequence containing a mixture of 14 GC pairs and 11 AU pairs resists condensation relative to DNA of an equivalent sequence or to 25 bp poly(rA):poly(rU) RNA. A comparison of wide-angle x-ray scattering profiles with simulation results suggests that spermine is sequestered deep within the major groove of mixed-sequence RNA. This prevents condensation by limiting opportunities to bridge to other molecules and stabilizes the RNA by locking it into a particular conformation. In contrast, for DNA, simulations suggest that spermine binds externally to the duplex, offering opportunities for intermolecular interaction. The goal of this study is to explain how RNA can remain soluble and available for interaction with other molecules in the cell despite the presence of spermine at concentrations high enough to precipitate DNA.     

Analysis of mixed DNA‐bisnaphthalimide interactions involving groove association and intercalation with surface‐based and solution methodologies

The bisnaphthalimide cytotoxic agent elinafide exhibits a mixed DNA binding mode including groove‐association and intercalation. We have compared the interaction of elinafide and two bisnaphthalimide analogues with various natural and modified DNA sequences using solution NMR and UV‐melting methods and surface plasmon resonance (SPR) experiments at different pH conditions. The combined data obtained with these techniques established a high‐affinity binding mode comprising intercalation and strong electrostatic contacts with guanine bases in the major groove, and a weaker interaction with A·T pairs likely involving groove association. However, the SPR binding constants and the NMR and UV‐melting binding parameters responded differently to variations in DNA bases and ligand intercalating moieties. The rates and equilibrium constants determined by SPR clearly responded to changes in pH and DNA groove composition, but were rather insensitive to alterations in drug rings and DNA bases affecting the intercalation process. Conversely, the intermolecular stacking interactions detected by NMR and the ligand‐induced thermal stabilizations measured by UV depended on both sets of factors and were controlled by the sequence‐dependent properties of the DNA helices, indicating that these data were modulated by naphthalimide stacking in addition to groove association. A two‐step binding process where a groove‐bound state is required prior to intercalation is proposed as an explanation for these observations. These findings may be useful for studying other classes of DNA‐ and RNA‐binding drugs, which frequently combine groove‐binding and stacking moieties. © 2012 Wiley Periodicals, Inc. Biopolymers 97:974–987, 2012.     

Effects of site-specific substitution of 5-fluorouridine on the stabilities of duplex DNA and RNA.

The effects of 5-fluorouridine (FUrd) and 5-fluorodeoxyuridine (FdUrd) substitution on the stabilities of duplex RNA and DNA have been studied to determine how FUrd substitution in nucleic acids may alter the efficiency of biochemical processes that require complementary base pairing for molecular recognition. The parent sequence, 5'-GCGAAUUCGC, contains two non-equivalent uridines. Eight oligonucleotides (four RNA and four DNA) were prepared with either zero, one or two Urd substituted by FUrd. The stability of each self-complementary duplex was determined by measuring the absorbance at 260 nm as a function of temperature. Tm values were calculated from the first derivative of the absorbance versus temperature profiles and values for delta H0 and delta S0 were calculated from the concentration dependence of the Tm. Individual absorbance versus temperature curves were also analyzed by a parametric approach to calculate thermodynamic parameters for the duplex to single-stranded transition. Analysis of the thermodynamic parameters for each oligonucleotide revealed that FUrd substitution had sequence-dependent effects in both A-form RNA and B-form DNA duplexes. Conservation of helix geometry in FUrd-substituted duplexes was determined by CD spectroscopy. FUrd substitution at a single site in RNA stabilized the duplex (delta delta G37 = 0.8 kcal/mol), largely due to more favorable stacking interactions. FdUrd substitution at a single site in DNA destabilized the duplex (delta delta G37 = 0.3 kcal/mol) as a consequence of less favorable stacking interactions. All duplexes melt via single cooperative transitions.     

The hydration of nucleic acid duplexes as assessed by a combination of volumetric and structural techniques

Using high precision densimetric and ultrasonic measurements, we have determined, at 25°C, the apparent molar volumes ΦV and the apparent molar compressibilities ΦK_S of four nucleic acid duplexes—namely, the DNA duplex, poly(dIdC)poly(dIdC); the RNA duplex, poly(rA)poly(rU); and the two DNA/RNA hybrid duplexes, poly(rA)poly(dT) and poly(dA)poly(rU). Using available fiber diffraction data on these duplexes, we have calculated the molecular volumes as well as the solvent‐accessible surface areas of the constituent charged, polar, and nonpolar atomic groups. We found that the hydration properties of these nucleic acid duplexes do not correlate with the extent and the chemical nature of the solvent‐exposed surfaces, thereby suggesting a more specific set of duplex–water interactions beyond general solvation effects. A comparative analysis of our volumetric data on the four duplexes, in conjunction with available structural information, suggests the following features of duplex hydration: (a) The four duplexes exhibit different degrees of hydration, in the order poly(dIdC)poly(dIdC) > poly(dGdC)poly(dGdC) > poly(dAdT)poly(dAdT) ≈ poly(dA)poly(dT). (b) Repetitive AT and IC sequences within a duplex are solvated beyond general effects by a spine of hydration in the minor groove, with this sequence‐specific water network involving about 8 additional water molecules from the second and, perhaps, even the third hydration layers. (c) Repetitive GC and IC sequences within a duplex are solvated beyond general effects by a “patch of hydration” in the major groove, with this water network involving about 13 additional water molecules from the second and, perhaps, even the third hydration layers. (d) Random sequence, polymeric DNA duplexes, which statistically lack extended regions of repetitive AT, GC, or IC sequences, do not experience such specific enhancements of hydration. Consequently, consistent with our previous observations (T. V. Chalikian, A. P. Sarvazyan, G. E. Plum, and K. J. Breslauer, Biochemistry, 1994, Vol. 33, pp. 2394–2401), duplexes with approximately 50% AT content exhibit the weakest hydration, while an increase or decrease from this AT content causes enhancement of hydration, either due to stronger hydration of the minor groove (an increase in AT content) or due to stronger hydration of the major groove (an increase in GC content). (e) In dilute aqueous solutions, a B‐DNA duplex is more hydrated than an A‐DNA duplex, a volumetric‐based conclusion that is in agreement with previous results obtained on crystals, fibers, and DNA solutions in organic solvent–water mixtures. (f) the A‐like, RNA duplex poly(rA)poly(rU) and the structurally similar A‐like, hybrid duplex poly(rA)poly(dT), exhibit similar hydration properties, while the structurally distinct A‐like, hybrid duplex poly(rA)poly(dT) and non‐A‐like, hybrid duplex poly(dA)poly(rU) exhibit differential hydration properties, consistent with structural features dictating hydration characteristics. We discuss how volumetric characterizations, in conjunction with structural studies, can be used to describe, define, and resolve the general and sequence/conformation‐specific hydration properties of nucleic acid duplexes. © 1999 John Wiley & Sons, Inc. Biopoly 50: 459–471, 1999     

Minor groove DNA alkylation directed by major groove triplex forming oligodeoxyribonucleotides.

We describe sequence-specific alkylation in the minor groove of double-stranded DNA by a hybridization-triggered reactive group conjugated to a triplex forming oligodeoxyribonucleotide (TFO) that binds in the major groove. The 24 nt TFOs (G/A motif) were designed to form triplexes with a homopurine tract within a 65 bp target duplex. They were conjugated to an N 5-methyl-cyclopropapyrroloindole (MCPI) residue, a structural analog of cyclopropapyrroloindole (CPI), the reactive subunit of the potent antibiotic CC-1065. These moieties react in the DNA minor groove, alkylating adenines at their N3 position. In order to optimize alkylation efficiency, linkers between the TFO and the MCPI were varied both in length and composition. Quantitative alkylation of target DNA was achieved when the dihydropyrroloindole (DPI) subunit of CC-1065 was incorporated between an octa(propylene phosphate) linker and MCPI. The required long linker traversed one strand of the target duplex from the major groove-bound TFO to deliver the reactive group to the minor groove. Alkylation was directed by relative positioning of the TFOs. Sites in the minor groove within 4-8 nt from the end of the TFO bearing the reactive group were selectively alkylated.     

DNase I-induced DNA conformation. 2 A structure of a DNase I-octamer complex.

The structure of a complex between DNase I and d(GCGATCGC)2 has been solved by molecular replacement and refined to an R-factor of 0.174 for all data between 6 and 2 A resolution. The nicked octamer duplexes have lost a dinucleotide from the 3' ends of one strand and are hydrogen-bonded across a 2-fold axis to form a quasi-continuous double helix of 14 base-pairs. DNase I is bound in the minor groove of the B-type DNA duplex forming contacts in and along both sides of the minor groove extending over a total of six base-pairs. As a consequence of binding of DNase I to the DNA-substrate the minor groove opens by about 3 A and the duplex bends towards the major groove by about 20 degrees. Apart from these more global distortions the bound duplex also shows significant deviations in local geometry. A major cause for the observed perturbations in the DNA conformation seems to be the stacking type interaction of a tyrosine ring (Y76) with a deoxyribose. In contrast, the enzyme structure is nearly unchanged compared to free DNase I (0.49 A root-mean-square deviations for main-chain atoms) thus providing a rigid framework to which the DNA substrate has to adapt on binding. These results confirm the hypothesis that groove width and stiffness are major factors determining the global sequence dependence of the enzyme's cutting rates. The nicked octamer present in the crystals did not allow us to draw detailed conclusions about the catalytic mechanism but confirmed the location of the active site near H134 on top of the central beta-sheets. A second cut of the DNA induced by diffusion of Mn2+ into the crystals may suggest the presence of a secondary active site in DNase I.     

Synthesis and properties of 4'-ThioDNA: unexpected RNA-like behavior of 4'-ThioDNA

The synthesis and properties of fully modified 4′-thioDNAs, oligonucleotides consisting of 2′-deoxy-4′-thionucleosides, were examined. In addition to the known literature properties (preferable hybridization with RNA and resistance to endonuclease hydrolysis), we also observed higher resistance of 4′-thioDNA to 3′-exonuclease cleavage. Furthermore, we found that fully modified 4′-thioDNAs behaved like RNA molecules in their hybridization properties and structural aspect, at least in the case of the 4′-thioDNA duplex. This observation was confirmed by experiments using groove binders, in which a 4′-thioDNA duplex interacts with an RNA major groove binder, lividomycin A, but not with DNA groove binders, to give an increase in its thermal stability. Since a 4′-thioDNA duplex competitively inhibited the hydrolysis of an RNA duplex by RNase V₁, it was not only the physical properties but also this biological data suggested that a 4′-thioDNA duplex has an RNA-like structure.     

Formation of sheared G:A base pairs in an RNA duplex modelled after ribozymes, as revealed by NMR.

The thermal stability and structure of an RNA duplex, r(GGACGAGUCC)2, the base sequence of which was modelled after both a hammerhead ribozyme and a lead ribozyme, were studied by CD and NMR. We previously demonstrated that the corresponding DNA duplex, d(GGACGAGTCC)2, formed unique 'sheared' G:A base pairs, where an amino proton, instead of an imino proton, of G is involved in the hydrogen bonding, and G and A bases are arranged 'side by side' instead of 'head to head' (Nucleic Acids Res. (1993) 21, 5418-5424). CD melting profiles showed that the RNA duplex is thermally more stable than the corresponding DNA duplex. NMR studies revealed that sheared G:A base pairs are formed in the RNA duplex, too, although the overall structure of the RNA is the A form, which differs from the B form taken on by the corresponding DNA. A model building study confirmed that sheared G:A base pairs can be accommodated in the double helical structure of the A form. A difference between the RNA and DNA duplexes in the stacking interaction involving G:A mismatch bases is also suggested. The demonstration that sheared G:A base pairs can be formed not only in DNA but also in RNA suggests that this base pairing plays an important role regarding the RNA structure.     

X-ray structure of the DNase I-d(GGTATACC)2 complex at 2.3 A resolution.

The crystal structure of a complex between DNase I and the self-complementary octamer duplex d(GGTATACC)2 has been solved using the molecular replacement method and refined to a crystallographic R-factor of 18.8% for all data between 6.0 and 2.3 A resolution. In contrast to the structure of the DNase I-d(GCGATCGC)2 complex solved previously, the DNA remains uncleaved in the crystal. The general architecture of the two complexes is highly similar. DNase I binds in the minor groove of a right-handed DNA duplex, and to the phosphate backbones on either side over five base-pairs, resulting in a widening of the minor groove and a concurrent bend of the DNA away from the bound enzyme. There is very little change in the structure of the DNase I on binding the substrate. Many other features of the interaction are conserved in the two complexes, in particular the stacking of a deoxyribose group of the DNA onto the side-chain of a tyrosine residue (Y76), which affects the DNA conformation and the binding of an arginine side-chain in the minor groove. Although the structures of the DNA molecules appear at first sight rather similar, detailed analysis reveals some differences that may explain the relative resistance of the d(GGTATACC)2 duplex to cleavage by DNase I: whilst some backbone parameters are characteristic of a B-conformation, the spatial orientation of the base-pairs in the d(GGTATACC)2 duplex is close to that generally observed in A-DNA. These results further support the hypothesis that the minor-groove width and depth and the intrinsic flexibility of DNA are the most important parameters affecting the interaction. The disposition of residues around the scissile phosphate group suggests that two histidine residues, H134 and H252, are involved in catalysis.