Development of a 3D Tissue‐Engineered Skeletal Muscle and Bone Co‐culture System

In vitro 3D tissue‐engineered (TE) structures have been shown to better represent in vivo tissue morphology and biochemical pathways than monolayer culture, and are less ethically questionable than animal models. However, to create systems with even greater relevance, multiple integrated tissue systems should be recreated in vitro. In the present study, the effects and conditions most suitable for the co‐culture of TE skeletal muscle and bone are investigated. High‐glucose Dulbecco's modified Eagle medium (HG‐DMEM) supplemented with 20% fetal bovine serum followed by HG‐DMEM with 2% horse serum is found to enable proliferation of both C2C12 muscle precursor cells and TE85 human osteosarcoma cells, fusion of C2C12s into myotubes, as well as an upregulation of RUNX2/CBFa1 in TE85s. Myotube formation is also evident within indirect contact monolayer cultures. Finally, in 3D co‐cultures, TE85 collagen/hydroxyapatite constructs have significantly greater expression of RUNX2/CBFa1 and osteocalcin/BGLAP in the presence of collagen‐based C2C12 skeletal muscle constructs; however, fusion within these constructs appears reduced. This work demonstrates the first report of the simultaneous co‐culture and differentiation of 3D TE skeletal muscle and bone, and represents a significant step toward a full in vitro 3D musculoskeletal junction model.     

Electromechanical coupling between skeletal and cardiac muscle. Implications for infarct repair

Skeletal myoblasts form grafts of mature muscle in injured hearts, and these grafts contract when exogenously stimulated. It is not known, however, whether cardiac muscle can form electromechanical junctions with skeletal muscle and induce its synchronous contraction. Here, we report that undifferentiated rat skeletal myoblasts expressed N-cadherin and connexin43, major adhesion and gap junction proteins of the intercalated disk, yet both proteins were markedly downregulated after differentiation into myo-tubes. Similarly, differentiated skeletal muscle grafts in injured hearts had no detectable N-cadherin or connexin43; hence, electromechanical coupling did not occur after in vivo grafting. In contrast, when neonatal or adult cardiomyocytes were cocultured with skeletal muscle, approximately 10% of the skeletal myotubes contracted in synchrony with adjacent cardiomyocytes. Isoproterenol increased myotube contraction rates by 25% in coculture without affecting myotubes in monoculture, indicating the cardiomyocytes were the pacemakers. The gap junction inhibitor heptanol aborted myotube contractions but left spontaneous contractions of individual cardiomyocytes intact, suggesting myotubes were activated via gap junctions. Confocal microscopy revealed the expression of cadherin and connexin43 at junctions between myotubes and neonatal or adult cardiomyocytes in vitro. After microinjection, myotubes transferred dye to neonatal cardiomyocytes via gap junctions. Calcium imaging revealed synchronous calcium transients in cardiomyocytes and myotubes. Thus, cardiomyocytes can form electromechanical junctions with some skeletal myotubes in coculture and induce their synchronous contraction via gap junctions. Although the mechanism remains to be determined, if similar junctions could be induced in vivo, they might be sufficient to make skeletal muscle grafts beat synchronously with host myocardium.     

Tenocytic extract and mechanical stimulation in a tissue‐engineered tendon construct increases cellular proliferation and ECM deposition

Chemical and mechanical stimulation, when properly utilized, positively influence both the differentiation of in vitro cultured stem cells and the quality of the deposited extracellular matrix (ECM). This study aimed to find if cell‐free extract from primary tenocytes can positively affect the development of a tissue‐engineered tendon construct, consisting of a human umbilical vein (HUV) seeded with mesenchymal stem cells (MSCs) subjected to cyclical mechanical stimulation. The tenocytic cell‐free extract possesses biological material from tendon cells that could potentially influence MSC tenocytic differentiation and construct development. We demonstrate that the addition of tenocytic extract in statically cultured tendon constructs increases ECM deposition and tendon‐related gene expression of MSCs. The incorporation of mechanical stimulation (2% strain for 30 min/day at 0.5 cycles/min) with tenocytic extract further improved the MSC seeded HUV constructs by increasing cellularity of the construct by 37% and the ultimate tensile strength by 33% compared to the constructs with only mechanical stimulation after 14 days. Furthermore, the addition of mechanical stimulation to the extract supplementation produced longitudinal ECM fibril alignment along with dense connective tissue, reminiscent of natural tendon.     

Uniaxial mechanical strain modulates the differentiation of neural crest stem cells into smooth muscle lineage on micropatterned surfaces

Neural crest stem cells (NCSCs) play an important role in the development and represent a valuable cell source for tissue engineering. However, how mechanical factors in vivo regulate NCSC differentiation is not understood. Here NCSCs were derived from induced pluripotent stem cells and used as a model to determine whether vascular mechanical strain modulates the differentiation of NCSCs into smooth muscle (SM) lineage. NCSCs were cultured on micropatterned membranes to mimic the organization of smooth muscle cells (SMCs), and subjected to cyclic uniaxial strain. Mechanical strain enhanced NCSC proliferation and ERK2 phosphorylation. In addition, mechanical strain induced contractile marker calponin-1 within 2 days and slightly induced SM myosin within 5 days. On the other hand, mechanical strain suppressed the differentiation of NCSCs into Schwann cells. The induction of calponin-1 by mechanical strain was inhibited by neural induction medium but further enhanced by TGF-β. For NCSCs pre-treated with TGF-β, mechanical strain induced the gene expression of both calponin-1 and SM myosin. Our results demonstrated that mechanical strain regulates the differentiation of NCSCs in a manner dependent on biochemical factors and the differentiation stage of NCSCs. Understanding the mechanical regulation of NCSC differentiation will shed light on the development and remodeling of vascular tissues, and how transplanted NCSCs respond to mechanical factors.     

Validation of a high-throughput microtissue fabrication process for 3D assembly of tissue engineered cartilage constructs

Described here is a simple, high-throughput process to fabricate pellets with regular size and shape and the assembly of pre-cultured pellets in a controlled manner into specifically designed 3D plotted porous scaffolds. Culture of cartilage pellets is a well-established process for inducing re-differentiation in expanded chondrocytes. Commonly adopted pellet culture methods using conical tubes are inconvenient, time-consuming and space-intensive. We compared the conventional 15-mL tube pellet culture method with 96-well plate-based methods, examining two different well geometries (round- and v-bottom plates). The high-throughput production method was then used to demonstrate guided placement of pellets within a scaffold of defined pore size and geometry for the 3D assembly of tissue engineered cartilage constructs. While minor differences were observed in tissue quality and size, the chondrogenic re-differentiation capacity of human chondrocytes, as assessed by GAG/DNA, collagen type I and II immunohistochemistry and collagen type I, II and aggrecan mRNA expression, was maintained in the 96-well plate format and pellets of regular size and spheroidal shape were produced. This allowed for simple production of large numbers of reproducible tissue spheroids. Furthermore, the pellet-assembly method successfully allowed fluorescently labelled pellets to be individually visualised in 3D. During subsequent culture of 3D assembled tissue engineered constructs in vitro, pellets fused to form a coherent tissue, promoting chondrogenic differentiation and GAG accumulation.     

Optimizing seeding and culture methods to engineer smooth muscle tissue on biodegradable polymer matrices

The engineering of functional smooth muscle (SM) tissue is critical if one hopes to successfully replace the large number of tissues containing an SM component with engineered equivalents. This study reports on the effects of SM cell (SMC) seeding and culture conditions on the cellularity and composition of SM tissues engineered using biodegradable matrices (5 x 5 mm, 2-mm thick) of polyglycolic acid (PGA) fibers. Cells were seeded by injecting a cell suspension into polymer matrices in tissue culture dishes (static seeding), by stirring polymer matrices and a cell suspension in spinner flasks (stirred seeding), or by agitating polymer matrices and a cell suspension in tubes with an orbital shaker (agitated seeding). The density of SMCs adherent to these matrices was a function of cell concentration in the seeding solution, but under all conditions a larger number (approximately 1 order of magnitude) and more uniform distribution of SMCs adherent to the matrices were obtained with dynamic versus static seeding methods. The dynamic seeding methods, as compared to the static method, also ultimately resulted in new tissues that had a higher cellularity, more uniform cell distribution, and greater elastin deposition. The effects of culture conditions were next studied by culturing cell-polymer constructs in a stirred bioreactor versus static culture conditions. The stirred culture of SMC-seeded polymer matrices resulted in tissues with a cell density of 6.4 +/- 0.8 x 10(8) cells/cm3 after 5 weeks, compared to 2.0 +/- 1.1 x 10(8) cells/cm3 with static culture. The elastin and collagen synthesis rates and deposition within the engineered tissues were also increased by culture in the bioreactors. The elastin content after 5-week culture in the stirred bioreactor was 24 +/- 3%, and both the elastin content and the cellularity of these tissues are comparable to those of native SM tissue. New tissues were also created in vivo when dynamically seeded polymer matrices were implanted in rats for various times. In summary, the system defined by these studies shows promise for engineering a tissue comparable in many respects to native SM. This engineered tissue may find clinical applications and provide a tool to study molecular mechanisms in vascular development.     

It's all in the timing: Modeling isovolumic contraction through development and disease with a dynamic dual electromechanical bioreactor system

This commentary discusses the rationale behind our recently reported work entitled “Mimicking isovolumic contraction with combined electromechanical stimulation improves the development of engineered cardiac constructs,” introduces new data supporting our hypothesis, and discusses future applications of our bioreactor system. The ability to stimulate engineered cardiac tissue in a bioreactor system that combines both electrical and mechanical stimulation offers a unique opportunity to simulate the appropriate dynamics between stretch and contraction and model isovolumic contraction in vitro. Our previous study demonstrated that combined electromechanical stimulation that simulated the timing of isovolumic contraction in healthy tissue improved force generation via increased contractile and calcium handling protein expression and improved hypertrophic pathway activation. In new data presented here, we further demonstrate that modification of the timing between electrical and mechanical stimulation to mimic a non-physiological process negatively impacts the functionality of the engineered constructs. We close by exploring the various disease states that have altered timing between the electrical and mechanical stimulation signals as potential future directions for the use of this system.     

Ex vivo generation of mature and functional human smooth muscle cells differentiated from skeletal myoblasts

We described the ex vivo production of mature and functional human smooth muscle cells (SMCs) derived from skeletal myoblasts. Initially, myoblasts expressed all myogenic cell-related markers such as Myf5, MyoD and Myogenin and differentiate into myotubes. After culture in a medium containing vascular endothelial growth factor (VEGF), these cells were shown to have adopted a differentiated SMC identity as demonstrated by alphaSMA, SM22alpha, calponin and smooth muscle-myosin heavy chain expression. Moreover, the cells cultured in the presence of VEGF did not express MyoD anymore and were unable to fuse in multinucleated myotubes. We demonstrated that myoblasts-derived SMCs (MDSMCs) interacted with endothelial cells to form, in vitro, a capillary-like network in three-dimensional collagen culture and, in vivo, a functional vascular structure in a Matrigel implant in nonobese diabetic-severe combined immunodeficient mice. Based on the easily available tissue source and their differentiation into functional SMCs, these data argue that skeletal myoblasts might represent an important tool for SMCs-based cell therapy.     

Pannexin 3 functions as an ER Ca(2+) channel, hemichannel, and gap junction to promote osteoblast differentiation

The pannexin proteins represent a new gap junction family. However, the cellular functions of pannexins remain largely unknown. Here, we demonstrate that pannexin 3 (Panx3) promotes differentiation of osteoblasts and ex vivo growth of metatarsals. Panx3 expression was induced during osteogenic differentiation of C2C12 cells and primary calvarial cells, and suppression of this endogenous expression inhibited differentiation. Panx3 functioned as a unique Ca(2+) channel in the endoplasmic reticulum (ER), which was activated by purinergic receptor/phosphoinositide 3-kinase (PI3K)/Akt signaling, followed by activation of calmodulin signaling for differentiation. Panx3 also formed hemichannels that allowed release of ATP into the extracellular space and activation of purinergic receptors with the subsequent activation of PI3K-Akt signaling. Panx3 also formed gap junctions and propagated Ca(2+) waves between cells. Blocking the Panx3 Ca(2+) channel and gap junction activities inhibited osteoblast differentiation. Thus, Panx3 appears to be a new regulator that promotes osteoblast differentiation by functioning as an ER Ca(2+) channel and a hemichannel, and by forming gap junctions.     

Gap junction permeability between tenocytes within tendon fascicles is suppressed by tensile loading

Gap junction communication is an essential component in the mechanosensitive response of tenocytes. However, little is known about direct mechanoregulation of gap junction turnover and permeability. The present study tests the hypothesis that mechanical loading alters gap junction communication between tenocyte within tendon fascicles. Viable tenocytes within rat tail tendon fasicles were labelled with calcein-AM and subjected to a fluorescent loss induced by photobleaching (FLIP) protocol. A designated target cell within a row of tenocytes was continuously photobleached at 100% laser power whilst recording the fluorescent intensity of neighbouring cells. A mathematical compartment model was developed to estimate the intercellular communication between tenocytes based upon the experimental FLIP data. This produced a permeability parameter, k, which quantifies the degree of functioning gap functions between cells as confirmed by the complete inhibition of FLIP by the inhibitor 18α-glycyrrhentic acid. The application of 1N static tensile load for 10?min had no effect on gap junction communication. However, when loading was increased to 1?h, there was a statistically significant reduction in gap junction permeability. This coincided with suppression of connexin 43 protein expression in loaded samples as determined by confocal immunofluorescence. However, there was an upregulation of connexin 43 mRNA. These findings demonstrate that tenocytes remodel their gap junctions in response to alterations in mechanical loading with a complex mechanosensitive mechanism of breakdown and remodelling. This is therefore the first study to show that tenocyte gap junctions are not only important in transmitting mechanically activated signals but that mechanical loading directly regulates gap junction permeability.     

Enhanced matrix synthesis in de novo, scaffold free cartilage-like tissue subjected to compression and shear

Production of a de novo cartilage-like tissue construct is a goal for the repair of traumatic chondral defects. We aimed to enhance the matrix synthesis within a scaffold free, de novo cartilage-like tissue construct by way of mechanical load. A novel loading machine that enables the application of shear, as well as compression, was used to subject tissue engineered cartilage-like tissue to mechanical stress. The machine, which applies the load through a roller mechanism, can load up to 20 constructs with four different loading patterns simultaneously. The expression of mRNA encoding matrix products, and subsequent changes in matrix protein content, were analyzed after various loading regimes. The force applied to the immature tissue had a direct bearing on the short-term (first 4 h) response. A load of 0.5 N caused an increase in collagen II and aggrecan mRNA within an hour, with a peak at 2 h. This increased mRNA expression was translated into an increase of up to 60% in the glycosaminoglycan content of the optimally loaded constructs after 4 days of intermittent cyclical loading. Introducing pauses between load cycles reproducibly lead to an increase in GAG/DNA. In contrast, constant cyclical load, with no pause, lead to a decrease in the final glycosaminoglycan content compared with unloaded controls. Our data suggest that a protocol of mechanical stimulation, simulating in vivo conditions and involving shear and compression, may be a useful mechanism to enhance the properties of tissue engineered tissue prior to implantation.     

Engineered heart tissue enables study of residual undifferentiated embryonic stem cell activity in a cardiac environment

Embryonic stem cell (ESC) derivatives are a promising cell source for cardiac cell therapy. Mechanistic studies upon cell injection in conventional animal models are limited by inefficient delivery and poor cell survival. As an alternative, we have used an engineered heart tissue (EHT) based on neonatal rat cardiomyocytes (CMs) cultivated with electrical field stimulation as an in vitro model to study cell injection. We injected (0.001, 0.01, and 0.1 million) and tracked (by qPCR and histology) undifferentiated yellow‐fluorescent protein transgenic mouse ESCs and Flk1 + /PDGFRα+ cardiac progenitor (CPs) cells, to investigate the effect of the cardiac environment on cell differentiation, as well as to test whether our in vitro model system could recapitulate the formation of teratoma‐like structures commonly observed upon in vivo ESC injection. By 8 days post‐injection, ESCs were spatially segregated from the cardiac cell population; however, ESC injection increased survival of CMs. The presence of ESCs blocked electrical conduction through the tissue, resulting in a 46% increase in the excitation threshold. Expression of mouse cardiac troponin I, was markedly increased in CP injected constructs compared to ESC injected constructs at all time points and cell doses tested. As early as 2 weeks, epithelial and ganglion‐like structures were observed in ESC injected constructs. By 4 weeks of ESC injection, teratoma‐like structures containing neural, epithelial, and connective tissue were observed in the constructs. Non‐cardiac structures were observed in the CP injected constructs only after extended culture (4 weeks) and only at high cell doses, suggesting that these cells require further enrichment or differentiation prior to transplantation. Our data indicate that the cardiac environment of host tissue and electrical field stimulation did not preferentially guide the differentiation of ESCs towards the cardiac lineage. In the same environment, injection of CP resulted in a more robust cardiac differentiation than injection of ESC. Our data demonstrate that the model‐system developed herein can be used to study the functional effects of candidate stem cells on the host myocardium, as well as to measure the residual activity of undifferentiated cells present in the mixture. Biotechnol. Bioeng. 2011; 108:704–719. © 2010 Wiley Periodicals, Inc.     

Differential effects of equiaxial and uniaxial strain on mesenchymal stem cells

Bone marrow mesenchymal stem cells (MSCs) can differentiate into a variety of cell types, including vascular smooth muscle cells (SMCs), and have tremendous potential as a cell source for cardiovascular regeneration. We postulate that specific vascular environmental factors will promote MSC differentiation into SMCs. However, the effects of the vascular mechanical environment on MSCs have not been characterized. Here we show that mechanical strain regulated the expression of SMC markers in MSCs. Cyclic equiaxial strain downregulated SM alpha-actin and SM-22alpha in MSCs on collagen- or elastin-coated membranes after 1 day, and decreased alpha-actin in stress fibers. In contrast, cyclic uniaxial strain transiently increased the expression of SM alpha-actin and SM-22alpha after 1 day, which subsequently returned to basal levels after the cells aligned in the direction perpendicular to the strain direction. In addition, uniaxial but not equiaxial strain induced a transient increase of collagen I expression. DNA microarray experiments showed that uniaxial strain increased SMC markers and regulated the expression of matrix molecules without significantly changing the expression of the differentiation markers (e.g., alkaline phosphatase and collagen II) of other cell types. Our results suggest that uniaxial strain, which better mimics the type of mechanical strain experienced by SMCs, may promote MSC differentiation into SMCs if cell orientation can be controlled. This study demonstrates the differential effects of equiaxial and uniaxial strain, advances our understanding of the mechanical regulation of stem cells, and provides a rational basis for engineering MSCs for vascular tissue engineering and regeneration.     

Magnetic Resonance Elastography Methodology for the Evaluation of Tissue Engineered Construct Growth

Traditional mechanical testing often results in the destruction of the sample, and in the case of long term tissue engineered construct studies, the use of destructive assessment is not acceptable. A proposed alternative is the use of an imaging process called magnetic resonance elastography. Elastography is a nondestructive method for determining the engineered outcome by measuring local mechanical property values (i.e., complex shear modulus), which are essential markers for identifying the structure and functionality of a tissue. As a noninvasive means for evaluation, the monitoring of engineered constructs with imaging modalities such as magnetic resonance imaging (MRI) has seen increasing interest in the past decade¹. For example, the magnetic resonance (MR) techniques of diffusion and relaxometry have been able to characterize the changes in chemical and physical properties during engineered tissue development². The method proposed in the following protocol uses microscopic magnetic resonance elastography (μMRE) as a noninvasive MR based technique for measuring the mechanical properties of small soft tissues³. MRE is achieved by coupling a sonic mechanical actuator with the tissue of interest and recording the shear wave propagation with an MR scanner⁴. Recently, μMRE has been applied in tissue engineering to acquire essential growth information that is traditionally measured using destructive mechanical macroscopic techniques⁵. In the following procedure, elastography is achieved through the imaging of engineered constructs with a modified Hahn spin-echo sequence coupled with a mechanical actuator. As shown in Figure 1, the modified sequence synchronizes image acquisition with the transmission of external shear waves; subsequently, the motion is sensitized through the use of oscillating bipolar pairs. Following collection of images with positive and negative motion sensitization, complex division of the data produce a shear wave image. Then, the image is assessed using an inversion algorithm to generate a shear stiffness map⁶. The resulting measurements at each voxel have been shown to strongly correlate (R²>0.9914) with data collected using dynamic mechanical analysis⁷. In this study, elastography is integrated into the tissue development process for monitoring human mesenchymal stem cell (hMSC) differentiation into adipogenic and osteogenic constructs as shown in Figure 2.     

Overexpression of nPKC theta is permissive for myogenic differentiation

Although protein kinase C (PKC) has been shown to participate in skeletal myogenic differentiation, the functions of individual isoforms of PKC in myogenesis have not been completely elucidated. These studies focused on the role of nPKC straight theta, an isoform of the PKC family whose expression has been shown to be regulated by commitment to the myogenic lineage, myogenic differentiation and innervation. We used the myogenic cell line C(2)C(12) as a tissue culture model system to explore the role of nPKC straight theta in the formation of multinucleated myotubes. We examined endogenous levels of nPKC straight theta in C(2)C(12) cells and showed that it is expressed at low levels in myoblasts compared to mouse skeletal muscle and that expression is maintained in myotubes. We overexpressed nPKC straight theta in C(2)C(12) myoblasts and examined the ability of overexpressing cells to differentiate into myotubes. Using an nPKC straight theta - green fluorescent protein (GFP) chimera to detect transfected myoblasts, we showed that overexpressed nPKC straight theta-GFP translocates to the plasma membrane in response to phorbol ester treatment of myoblast cultures in situ. nPKC straight theta-GFP was found to be completely extracted into the detergent-soluble fraction of cell lysates and was stably expressed throughout the extent of differentiation into myotubes. No difference was seen in the ability of myoblasts either overexpressing nPKC straight theta - GFP or GFP alone to form myotubes. These studies demonstrate that overexpression of nPKC straight theta does not interfere with fusion of myoblasts into myotubes suggesting that nPKC straight theta activity is not inhibitory for myogenesis. These studies also demonstrate a method for transfecting myoblasts and identifying differentiated cells that overexpress nPKC straight theta-GFP for investigating the function of nPKC straight theta in living myotubes.     

Cardiac β‐adrenergic receptor activation mediates distinct and cell type‐dependent changes in the expression and distribution of connexin 43

Activation of the sympatho‐β‐adrenergic receptors (β‐ARs) system is a hallmark of heart failure, leading to fibrosis and arrhythmias. Connexin 43 (Cx43) is the most abundant gap junctional protein in the myocardium. Current knowledge is limited regarding Cx43 remodelling in diverse cell types in the diseased myocardium and the underlying mechanism. We studied cell type‐dependent changes in Cx43 remodelling due to β‐AR overactivation and molecular mechanisms involved. Mouse models of isoproterenol stimulation or transgenic cardiomyocyte overexpression of β₂‐AR were used, which exhibited cardiac fibrosis and up‐regulated total Cx43 abundance. In both models, whereas Cx43 expression in cardiomyocytes was reduced and more laterally distributed, fibroblasts exhibited elevated Cx43 expression and enhanced gap junction communication. Mechanistically, activation of β₂‐AR in fibroblasts in vitro elevated Cx43 expression, which was abolished by the β₂‐antagonist ICI‐118551 or protein kinase A inhibitor H‐89, but simulated by the adenylyl cyclase activator forskolin. Our in vitro and in vivo data showed that β‐AR activation‐induced production of IL‐18 sequentially stimulated Cx43 expression in fibroblasts in a paracrine fashion. In summary, our findings demonstrate a pivotal role of β‐AR in mediating distinct and cell type‐dependent changes in the expression and distribution of Cx43, leading to pathological gap junction remodelling in the myocardium.     

A finite element model of cell-matrix interactions to study the differential effect of scaffold composition on chondrogenic response to mechanical stimulation

Mechanically induced cell deformations have been shown to influence chondrocyte response in 3D culture. However, the relationship between the mechanical stimulation and cell response is not yet fully understood. In this study a finite element model was developed to investigate cell-matrix interactions under unconfined compression conditions, using a tissue engineered encapsulating hydrogel seeded with chondrocytes. Model predictions of stress and strain distributions within the cell and on the cell boundary were shown to exhibit space-dependent responses that varied with scaffold mechanical properties, the presence of a pericellular matrix (PCM), and the cell size. The simulations predicted that when the cells were initially encapsulated into the hydrogel scaffolds, the cell size hardly affected the magnitude of the stresses and strains that were reaching the encapsulated cells. However, with the inclusion of a PCM layer, larger cells experienced enhanced stresses and strains resulting from the mechanical stimulation. It was also noted that the PCM had a stress shielding effect on the cells in that the peak stresses experienced within the cells during loading were significantly reduced. On the other hand, the PCM caused the stresses at the cell-matrix interface to increase. Based on the model predictions, the PCM modified the spatial stress distribution within and around the encapsulated cells by redirecting the maximum stresses from the periphery of the cells to the cell nucleus. In a tissue engineered cartilage exposed to mechanical loading, the formation of a neo-PCM by encapsulated chondrocytes appears to protect them from initially excessive mechanical loading. Predictive models can thus shed important insight into how chondrocytes remodel their local environment in order to redistribute mechanical signals in tissue engineered constructs.     

Functional 3‐D cardiac co‐culture model using bioactive chitosan nanofiber scaffolds

The in vitro generation of a three‐dimensional (3‐D) myocardial tissue‐like construct employing cells, biomaterials, and biomolecules is a promising strategy in cardiac tissue regeneration, drug testing, and tissue engineering applications. Despite significant progress in this field, current cardiac tissue models are not yet able to stably maintain functional characteristics of cardiomyocytes for long‐term culture and therapeutic purposes. The objective of this study was to fabricate bioactive 3‐D chitosan nanofiber scaffolds using an electrospinning technique and exploring its potential for long‐term cardiac function in the 3‐D co‐culture model. Chitosan is a natural polysaccharide biomaterial that is biocompatible, biodegradable, non‐toxic, and cost effective. Electrospun chitosan was utilized to provide structural scaffolding characterized by scale and architectural resemblance to the extracellular matrix (ECM) in vivo. The chitosan fibers were coated with fibronectin via adsorption in order to enhance cellular adhesion to the fibers and migration into the interfibrous milieu. Ventricular cardiomyocytes were harvested from neonatal rats and studied in various culture conditions (i.e., mono‐ and co‐cultures) for their viability and function. Cellular morphology and functionality were examined using immunofluorescent staining for alpha‐sarcomeric actin (SM‐actin) and gap junction protein, Connexin‐43 (Cx43). Scanning electron microscopy (SEM) and light microscopy were used to investigate cellular morphology, spatial organization, and contractions. Calcium indicator was used to monitor calcium ion flux of beating cardiomyocytes. The results demonstrate that the chitosan nanofibers retained their cylindrical morphology in long‐term cell cultures and exhibited good cellular attachment and spreading in the presence of adhesion molecule, fibronectin. Cardiomyocyte mono‐cultures resulted in loss of cardiomyocyte polarity and islands of non‐coherent contractions. However, the cardiomyocyte‐fibroblast co‐cultures resulted in polarized cardiomyocyte morphology and retained their morphology and function for long‐term culture. The Cx43 expression in the fibroblast co‐culture was higher than the cardiomyocytes mono‐culture and endothelial cells co‐culture. In addition, fibroblast co‐cultures demonstrated synchronized contractions involving large tissue‐like cellular networks. To our knowledge, this is the first attempt to test chitosan nanofiber scaffolds as a 3‐D cardiac co‐culture model. Our results demonstrate that chitosan nanofibers can serve as a potential scaffold that can retain cardiac structure and function. These studies will provide useful information to develop a strategy that allows us to generate engineered 3‐D cardiac tissue constructs using biocompatible and biodegradable chitosan nanofiber scaffolds for many tissue engineering applications. Biotechnol. Bioeng. 2013; 110: 637–647. © 2012 Wiley Periodicals, Inc.