Mechanism of extraction of chymotrypsin into isooctane at very low concentrations of aerosol OT in the absence of reversed micelles

Chymotrypsin is easily extracted from an aqueous solution into isooctane containing the anionic surfactant aerosol OT (AOT). The concentration of AOT needed to efficiently extract 0.5 mg/mL CMT is as low as 1 mM and as low as 0.2 mM AOT was sufficient to extract the protein into isooctane. The extraction process was unaffected by 10% (v/v) ethyl acetate in the isooctane phase. Moreover, spectroscopic analysis by electron paramagnetic resonance indicated that CMT did not exist inside a discreet water pool of a reversed micelle. Calculations of the number of AOT molecules associated per extracted CMT molecule indicate that only ca. 30 surfactant molecules interact with the protein, a value too low for reversed micellar incorporation of the protein in isooctane. These studies suggested that reversed micelles do not need to be involved in the actual transfer of the protein from the aqueous to the organic phase and protein solubilization in the organic phase is possible in the absence of reversed micelles. Based on these findings, a new mechanism has been proposed herein for protein extraction via the phase transfer method involving ionic surfactants. The central theme of this mechanism is the formation of an electrostatic complex between CMT and AOT at the aqueous/organic interface between AOT and CMT, thereby leading to the formation of a hydrophobic species that partitions into the organic phase. Consistent with this mechanism, the efficiency of extraction is dependent on the interfacial mass transfer, the concentrations of CMT and AOT in the aqueous and organic phases, respectively; the ionic strength of the aqueous phase; and the presence of various cosolvents. (c) 1994 John Wiley & Sons, Inc.     

Characterization of cholesterol oxidase activity in AOT-isooctane reverse micelles and its dependence on micelle size

Summary Characterization of cholesterol oxidase in AOT reverse micelles was performed. pH and temperature profiles show that the entrapment of the enzyme does not change its characteristics appreciably. The enzyme tends to behave as it does in water when micelle size increases and does not maximum rate at some intermediate micelle size. Km was 55–60 fold that in waterAbbreviations and parameters AOT Dioctyl sodium sulfosuccinate - CTAB Cetyl trimethylamonium bromide - K1^E Equilibrium constant of the enzyme between free and bound water - K2^E Equilibrium constant of the enzyme between bound water and surfactant - kf Catalytic constant in free water - kb Catalytic constant in bound water - ks Catalytic constant in surfactant - n Number of water molecules strongly bound to one surfactant molecule     

Inhibition of phosphatidylinositol-specific phospholipase C: Studies on synthetic substrates,inhibitors and a synthetic enzyme

Enzyme inhibition studies on phosphatidylinositol-specific phospholipase C (PI-PLC) from B. Cereus were performed in order to gain an understanding of the mechanism of the PI-PLC family of enzymes and to aid inhibitor design. Inhibition studies on two synthetic cyclic phosphonate analogues (1,2) of inositol cyclic-1:2-monophosphate (cIP), glycerol-2-phosphate and vanadate were performed using natural phosphatidylinositol (PI) substrate in Triton X100 co-micelles and an NMR assay. Further inhibition studies on PI-PLC from B. Cereus were performed using a chromogenic, synthetic PI analogue (DPG-PI), an HPLC assay and Aerosol-OT (AOT), phytic acid and vanadate as inhibitors. For purposes of comparison, a model PI-PLC enzyme system was developed employing a synthetic Cu(II)-metallomicelle and a further synthetic PI analogue (IPP-PI). The studies employing natural PI substrate in Triton X100 co-micelles and synthetic DPG-PI in the absence of surfactant indicate three classes of PI-PLC inhibitors: (1) active-site directed inhibitors (e.g. 1,2); (2) water-soluble polyanions (e.g. tetravanadate, phytic acid); (3) surfactant anions (e.g. AOT). Three modes of molecular recognition are indicated to be important: (1) active site molecular recognition; (2) recognition at an anion-recognition site which may be the active site, and; (3) interfacial (or hydrophobic) recognition which may be exploited to increase affinity for the anion-recognition site in anionic surfactants such as AOT. The most potent inhibition of PI-PLC was observed by tetravanadate and AOT. The metallomicelle model system was observed to mimic PI-PLC in reproducing transesterification of the PI analogue substrate to yield cIP as product and in showing inhibition by phytic acid and AOT.     

Surfactant Effects on Lipase-Catalyzed Hydrolysis of Olive Oil in AOT/ISOOCTANE Reverse Micelles

The effects of surfactant concentration on the hydrolytic activity of Candida rugosa lipase in AOT/isooctane reverse micelles with olive oil as the substrate has been investigated. A noncompetitive inhibition by the surfactant on the enzyme was observed. Strong dependences of the kinetic constants k_cat and k_M, but not k_I on the water-to-surfactant ratio (R value) have been identified. The benefits of carrying out the hydrolysis at higher surfactant and water concentrations were demonstrated from the improvement of the initial rate and time course of conversion.     

The Cleavage of Nucleic Acids in Reversed Micelles Using Site Specific Endonucleases

Plasmid and λ DNA molecules of between 2.2 and 48.5 kb pairs can be solubilised in n-hexane containing the surfactant sodium dioctyl sulfosuccinate (AOT) and aqueous buffers. Linear λ phage DNA fragments (2.2-23.1 kb pairs) and intact λ bio 1 DNA (48.5 kb pairs) are efficiently cleaved by Bam HI and Em RI in systems containing 100 mM AOT. Under these conditions, λ bio 1 DNA undergoes regioselective restriction by Hind III at only one site but is completely cleaved when the surfactant concentration is lowered to 50 mM. Covalent closed circular plasmid DNA (pUC8, 2.73 kb pairs) is only partially linearised by Eco RI and Bam HI in reversed micelles; Hae II cleavage affords both complete and partial restriction fragments. The results suggest that the tertiary structures adopted by substrate DNA in reversed micelles influence the availability of restriction sites.     

Surfactant enhancement of (S)-naproxen ester productivity from racemic naproxen by lipase in isooctane

In the enantioselective esterification of racemic Naproxen with trimethylsilyl methanol in isooctane by Candida cylindracea lipase, improvements in (S)-naproxen ester productivity and enzyme selectivity were demonstrated by adding bis(2-ethylhexyl) sodium sulfosuccinate (AOT) as the best surfactant. The effect of water content on the enhancement of enzyme activity was elucidated from the reduced adsorption of surfactant molecules on the lipase. A competitive inhibition by the alcohol and a noncompetitive inhibition by the surfactant to the enzyme were found from the kinetic analysis. By using a two-phase extraction, a complete separation of the surfactant from the organic solution was obtained. (c) 1996 John Wiley & Sons, Inc.     

Catalysis by enzymes entrapped into reversed micelles of surfactants in organic solvents. Peroxidase in the aerosol OT-water-octane system

Spectral and catalytic parameters of peroxidase solubilized in the aerosol OT-water-octane system have been studied. The spectrum of peroxidase solubilized in octane with AOT reversed micelles, a degree of surfactant hydration being above 12, is actually identical to that of the enzyme aqueous solution. On the other hand, significant spectral changes have been detected when transferring the enzyme from water to the reversed micelle medium at low degrees of surfactant hydration, precisely [H2O]/[AOT] less than 12. The reversed micelle-entrapped peroxidase catalyses the oxidation of pyrogallol with hydrogen peroxide much more actively (at [H2O]/[surfactant] approximately 13) than that in aqueous solution. The entrapment of peroxidase into surfactant reversed micelles increases precisely the catalytic constant of the reaction, i.e. the virtual reactivity of the enzyme increases ten and hundred times depending on degrees of surfactant hydration and concentration. The systems of reversed micelles may be considered as models of biomembranes. Our findings hence show that enzymes in vivo can be much more catalytically active then it appears possible to reveal in conventional experiments in vitro in aqueous solutions.     

Effect of chemical modification of lipase on the regulation of its lipolytic activity in reversed micelles

Hydrophilized and hydrophobized forms of the lipase from Mucor miehei were obtained by its chemical modification with cellobiose and N-hydroxysuccinimidyl palmitate with a modification degree of 4 in both cases. A comparative analysis of the regulation of the catalytic activities of the native and modified lipases was carried out in the system of reversed micelles of OT aerosol (AOT) in isooctane. The level of catalytic activity of all the lipase preparations in the micellar medium was found to be higher than that in aqueous solution. The chemical modification of lipase did not result in a change in the regulation of the oligomeric composition of the enzyme controlled by the degree of micelle hydration omega0 (micelle size). The kcat dependences on omega0 for each lipase preparation exhibit two maxima, corresponding to the functioning of lipase monomers and tetramers. The changes in the hydrophilic-lipophilic balance of the lipase surface significantly affect the character of the regulation of enzyme activity due to changes in the surfactant concentration (the number of micelles). The lipase hydrophobization results in a decrease in the enzyme activation effect with an increase in the AOT concentration in comparison with the native lipase. The lipase hydrophilization dramatically decreases the activity of lipase tetramer when the AOT concentration is increased. The catalytic activity of the monomer of hydrophilized lipase is practically independent of the AOT concentration. Kinetic data indicate a mixed type of activation of both oligomeric forms of the native and the hydrophobized lipase by AOT molecules and the noncompetitive type of the activation and AOT inhibition of the monomer and the tetramer of the hydrophilized lipase, respectively. The English version of the paper: Russian Journal of Bioorganic Chemistry, 2005, vol. 31, no. 6; see also http://www.maik.ru.     

Time-resolved fluorescence and circular dichroism of porphyrin cytochrome c and Zn-porphyrin cytochrome c incorporated in reversed micelles

Interactions between fluorescent horse heart cytochrome c derivatives (e. g. porphyrin cytochrome c and Zn-porphyrin cytochrome c) with surfactant interfaces in reversed micellar solutions have been studied, using different spectroscopic techniques. Anionic [sodium bis(2-ethylhexyl)sulfosuccinate, AOT] and cationic (cetyltrime-thylammonium bromide, CTAB) surfactant solutions have been used in order to investigate the effects of charge interactions between proteins and interfaces. Circular dichroism reveals that much of the protein secondary structure is lost in AOT-reversed micelles, especially when the molar water/surfactant ratio, wo, is high (wo = 40), whereas in CTAB-reversed micelles secondary structure seems to be preserved. Time-resolved fluorescence measurements of the porphyrin in the cytochrome c molecule yields information about the changes in structure and the dynamics of the protein upon interaction with surfactant assemblies both in aqueous and in hydrocarbon solutions. With AOT as surfactant a strong interaction between protein and interface can be observed. The effects found in aqueous AOT solution are of the same kind as in hydrocarbon solution. In the CTAB systems the interactions between protein and surfactant are much less pronounced. The measured effects on the fluorescence properties of the proteins are different in aqueous and hydrocarbon solutions. In general, the observations can be explained by an electrostatic attraction between the overall positively charged protein molecules and the anionic AOT interface. Electrostatic attraction can also occur between the cytochrome c derivatives and CTAB because there is a negatively charged zone on the surface of the proteins. From the fluorescence anisotropy decays it can be concluded that in the CTAB-reversed micellar system these interactions are not important, whereas in an aqueous CTAB solution the proteins interact with surfactant molecules.     

Spectroscopic properties of horse liver alcohol dehydrogenase in reversed micellar solutions

Catalytic and spectroscopic properties of alcohol dehydrogenase from horse liver, incorporated in reversed micellar media, have been studied. Two different reversed micellar systems have been used, one containing an anionic [sodium bis(2-ethylhexyl)sulfosuccinate, AOT], the other containing a cationic (cetyltrimethylammonium bromide, CTAB) surfactant. With 1-hexanol as substrate the turnover number of the enzyme in AOT-reversed micelles is strongly dependent on the water content of the system. At low wo ([H2O]/[surfactant]) (wo less than 20) no enzymatic activity can be detected whereas at high wo (wo = 40) the turnover is only slightly lower than in aqueous solution. In CTAB-reversed micelles the dependence of the turnover number on wo is much less. The enzymatic activity is in this case significantly lower than in aqueous solution and increases only slightly with an increasing water content of the reversed micelles. Possible interactions of the protein with the surfactant interfaces in the reversed micellar media were studied via circular dichroism and fluorescence measurements. From the circular dichroism of the protein backbone it is observed that the protein secondary structure is not significantly affected upon incorporation in the reversed micelles since the far-ultraviolet spectrum is not altered. Results from time-resolved fluorescence anisotropy experiments indicate that, especially in AOT-reversed micelles, interactions between the protein and the surfactant interface are largely electrostatic in nature, as evident from the dependence on the pH of the buffer used. In CTAB-reversed micellar solutions such interactions appear to be much less pronounced than in AOT.     

Improvement in extraction and catalytic activity of Mucor javanicus lipase by modification of AOT reverse micelle

Reverse micelles are formed in apolar solvents by spontaneous aggregation of surfactants. Surfactant sodium bis (2-ethylhexyl) sulfosuccinate (AOT) is most often used for the reverse micellar extraction of enzymes. However, the inactivation of enzyme due to strong interaction with AOT molecules is a severe problem. To overcome this problem, the AOT/water/isooctane reverse micellar system was modified by adding short chain polyethylene glycol 400 (PEG 400). The modified AOT reverse micellar system was used to extract Mucor javanicus lipase from the aqueous phase to the reverse micellar phase. The extraction efficiency (E) increased with the increase in PEG 400 addition and the maximum E in PEG 400 modified system was twofold higher than that in the PEG 400-free system. Upon addition of PEG 400, the water activity (a(w)) of aqueous phase decreased, whereas a(w) of reverse micellar phase increased. The circular dichroism spectroscopy analysis revealed that PEG 400 changes the secondary and tertiary structure of lipase. The maximum specific activity of lipase extracted in PEG 400-modified reverse micellar system was threefold higher than that in the PEG-free system.     

Enzymatic hydrolysis of microcrystalline cellulose in reverse micelles

The activities of cellulases from Trichoderma reesei entrapped in three types of reverse micelles have been investigated using microcrystalline cellulose as the substrate. The reverse micellar systems are formed by nonionic surfactant Triton X-100, anionic surfactant Aerosol OT (AOT), and cationic surfactant cetyltrimethyl ammonium bromide (CTAB) in organic solvent media, respectively. The influences of the molar ratio of water to surfactant omega0, one of characteristic parameters of reverse micelles, and other environmental conditions including pH and temperature, on the enzymatic activity have been studied in these reverse micellar systems. The results obtained indicate that these three reverse micelles are more effective than aqueous systems for microcrystalline cellulose hydrolysis, and cellulases show "superactivity" in these reverse micelles compared with that in aqueous systems under the same pH and temperature conditions. The enzymatic activity decreases with the increase of omega0 in both AOT and Triton X-100 reverse micellar systems, but reaches a maximum at omega0 of 16.7 for CTAB reverse micelles. Temperature and pH also influence the cellulose hydrolysis process. The structural changes of cellulases in AOT reverse micelles have been measured by intrinsic fluorescence method and a possible explanation for the activity changes of cellulases has been proposed.     

Synthesis of fatty acid esters by a recombinant cutinase in reversed micelles

Fusarium solani pisi recombinant cutinase, solubilized in AOT/isooctane-reversed micelles, was used to catalyze the esterification of fatty acids with aliphatic alcohols. Some relevant parameters for the enzyme activity such as pH, W(o) (water/surfactant molar ratio), temperature, and substrate concentration were optimized. Maximal specific activity was obtained for hexanol. The cutinase showed selectivity for short-chain fatty acids. The stability of the microencapsulated cutinase was investigated at various concentrations of water and different values of pH. Oleic acid had a negative effect on the cutinase stability, while hexanol proved to be a strong stabilizer increasing the half-life of the enzyme about 45 times. (c) 1993 John Wiley & Sons, Inc.     

Kinetics and stability of delta 5-3-ketosteroid isomerase from Pseudomonas testosteroni in the system of reverse micelles of aerosol OT in isooctane.

Partially purified delta 5-3-ketosteroid isomerase (KSI) from Pseudomonas testosteroni was studied kinetically after solubilization in reverse micelles of aerosol OT (AOT) in isooctane and water, as regards its application to biotechnology. With delta 5,10-estren-17 beta-ol-3-one as a substrate, KSI displays an enzyme activity in the micellar system but a low stability. In the presence of urea, the enzyme is, however, stable. Kinetic parameters of the stabilized enzyme are highly sensitive to both the hydration degree of the surfactant and its concentration. The hypothesis of the geometric correspondence of a non-spherical enzyme and spherical micellar matrix is considered.     

Tyrosinase activity in reversed micelles

The hydroxylase and oxidase activities of mushroom tyrosinase were studied in both sodium di-2-ethylhexylsulfosuccinate (AOT)/isooctane and cetyltrimethylammonium bromide (CTAB)/hexane/chloroform reversed micelles. The enzyme presented its highest activity when the water to surfactant molar ratio (W ₀) was 20 for both systems. When entrapped in the AOT reversed micelles, the enzyme activity decreased with the increase in AOT concentration at a constant W ₀, and the enzyme not only presented a higher reaction rate related to its oxidase activity but also a shorter lag period related to its hydroxylase activity. The relation between water activity and W ₀ revealed that enzyme activity in reversed micelles was more related to the size of the micelles which was determined by W ₀ and less to the water activity. Tyrosinase in CTAB reversed micelles showed potential for the analysis of o-diphenols.     

Effect of Chemical Modification of Lipase on the Regulation of Its Lipolytic Activity in Reversed Micelles

Hydrophilized and hydrophobized forms of the lipase from Mucor miehei were obtained by its chemical modification with cellobiose and N-succinimidyl palmitate with a modification degree of 4 in both cases. A comparative analysis of the regulation of the catalytic activities of the native and modified lipases was carried out in the system of reversed micelles of OT aerosol (AOT) in isooctane. The level of catalytic activity of all the lipase preparations in the micellar medium was found to be higher than that in aqueous solution. The chemical modification of lipase did not result in a change in the regulation of the oligomeric composition of the enzyme controlled by the degree of micelle hydration Ω₀ (micelle size). The k _cat dependences on Ω₀ for each lipase preparation exhibit two maxima, corresponding to the functioning of lipase monomers and tetramers. The changes in the hydrophilic-lipophilic balance of the lipase surface significantly affect the character of the regulation of enzyme activity due to changes in the surfactant concentration (the number of micelles). The lipase hydrophobization results in a decrease in the enzyme activation effect with an increase in the AOT concentration in comparison with the native lipase. The lipase hydrophilization dramatically decreases the activity of lipase tetramer when the AOT concentration is increased. The catalytic activity of the monomer of hydrophilized lipase is practically independent of the AOT concentration. Kinetic data indicate a mixed type of activation of both oligomeric forms of the native and the hydrophobized lipase by AOT molecules and the noncompetitive type of the activation and AOT inhibition of the monomer and the tetramer of the hydrophilized lipase, respectively.     

A comparative study of lysozyme conformation in various reverse micellar systems

The activity and conformation of lysozyme solubilized in apolar solvents via reverse micelles was investigated. The systems used were sodium di-2-ethylhexylsulfosuccinate (AOT)/isooctane/H₂O, cetyltrioctylammoniumbromide (CTAB)/CHCl₃, isooctane/H₂O; tetraethyleneglycoldodecylether (EO₄C₁₂)/isooctane/H₂O, and bulk water. CD spectra of lysozyme in reverse micellar solutions were investigated as a function of w₀ (= [H₂O]/[AOT]) and were compared to the spectra in aqueous solutions. No marked changes were found in the EO₄C₁₂ or in the CTAB systems with respect to water, which indicates that no sizeable conformational changes of the enzyme occurred upon solubilization in the reverse micellar systems. In agreement with previous studies [C. Grandi, R. E. Smith, and P. L. Luisi (1981) J. Biol. Chem. 256 , 837–843] dramatic conformational changes can be inferred in the AOT system on the basis of CD studies. This is taken as an indication that the enzyme denatures in this micellar system. This is particularly striking because the enzyme is fully active in AOT reverse micelles. The apparent paradox is solved by the observation that the native CD spectrum (and by inference, the native conformation) is maintained when lysozyme is bound to NAG or NAG₃, and by inference, when the substrate is bound, e.g., during enzyme turnover. However, in the absence of added NAG, NAG₃, or substrate, the enzyme in the AOT reverse micellar system rapidly denatures. Together with CD studies, fluorescence and nmr data confirm the hypothesis of an irreversible denaturation of lysozyme in the AOT system, the denaturation being slowed down when the substrate is present. The activity of the enzyme has been studied as a function of pH and w₀ using the chromophoric substrate 3,4-dinitrophenyl-tetra-N-acetyl-β-D -chitotetraoside (3,4-DNP-NAG₄). Generally speaking, the kinetic parameters are comparable to those found in bulk water solution. More detailed, in the CTAB system, k_cat tends to be smaller than in aqueous solution (with quite similar K_M), whereas in the EO₄C₁₂ system (at pH 7.0) the turnover number is larger and K_M is smaller than in water. In the AOT system, the kinetic parameters at pH 7.0 are also quite comparable to those found in water.     

Micellar catalysis of polyphenol oxidase in AOT/cyclohexane

The catalytic behaviour of mushroom polyphenol oxidase has been studied in dioctylsulphosuccinate (AOT)/cyclohexane reverse micelles. The steady-state conditions were accomplished up to 20 min and 17 μg protein in the assay towards 4-methylcatechol and no loss of specific activity was observed relative to aqueous medium. The pH activity profile of the enzyme was kept in reverse micelles as in water, showing a plateau between 5 and 6.5. The stability of polyphenol oxidase to pH was also studied and about 20% inactivation was found in reverse micelles relative to aqueous medium at neutral pHs. Moreover there was a decrease of stability at acidic pHs. The optimum W_o obtained was 20 and the enzyme was nearly independent of the surfactant concentration at constant W_o.

Kinetic studies of polyphenol oxidase towards several substrates showed that the substrate inhibition by p-cresol and 4-methylcatechol observed in buffer was not kept in AOT/cyclohexane reverse micelles. Moreover, the K_m increased and the catalytic efficiency (V/K_m) of the enzyme decreased as the hydrophobicity of substrates was increased.     

Protein refolding in reversed micelles

A novel process has been developed which uses reversed micelles to isolate denatured protein molecules from each other and allows them to refold individually. These reversed micelles are aqueous phase droplets stabilized by the surfactant AOT and suspended in isooctane. By adjusting conditions such that only one protein molecule is present per reversed micelle, it was possible to achieve independent folding without encountering the problem of aggregation due to interactions with neighboring molecules. The feasibility of this process was demonstrated using bovine pancreatic ribonuclease A as a model system. It was shown that denatured and reduced ribonuclease can be transferred from a buffered solution containing guanidine hydrochloride into reversed micelles to a greater extent than native enzyme under the same conditions. The denaturant concentration can then be significantly reduced in the reversed micellar phase, while retaining most of the protein, by means of extractive contacting stages with a denaturant-free aqueous solution. Denatured and reduced ribonuclease will subsequently recover full activity inside reversed micelles within 24 h upon addition of a mixture of reduced and oxidized glutathione to reoxidize disulfide bonds. Extraction of this refolded enzyme from reversed micelles back into aqueous solution can be accomplished by contacting the reversed micelle phase with a high ionic strength (1.0M KCl) aqueous solution containing ethyl acetate.