Sequence arrangement of the rDNA of Drosophila melanogaster.

The sequence arrangement of genes coding for stable rRNA species and of the interspersed spacers on long single strands of rDNA purified from total chromosomal DNA of Drosophila melanogaster has been determined by a study of the structure of rRNA:DNA hybrids which were mounted for electron microscope observation by the gene 32-ethidium bromide technique. One repeat unit contains the following sequences in the order given. First, an 18 S gene of length 2.13 +/- 0.17 kb. Second, an internal transcribed spacer (Spl) of length 1.58 +/- 0.15 kb. A short sequence coding for the 5.8S and perhaps the 2S rRNA species is located within this spacer. Third, the 28S gene with a length of 4.36 +/- 0.23 kb. About 55% of the 28S genes are unbroken or continuous (C genes). However, about 45% of the 28S genes contain an insertion of an additional segment of DNA that is not complementary to rRNA (l genes). The insertion occurs at a reproducible point 2.99 +/- 0.26 kb from the junction with Spl. The insertions are heterogeneous in length and occur in three broad size classes: 1.42 +/- 0.47, 3.97 +/- 0.55, and 6.59 +/- 0.62 kb. Fourth, an external spacer between the 28S gene and the next 18S gene which is presumably mainly nontranscribed and which has a heterogeneous length distribution with a mean length and standard deviation of 5.67 +/- 1.92 kb. Short inverted repeat stems (100-400 nucleotide pairs) occur at the base of the insertion. It is known from other studies that I genes occur only on the X chromosome. The present study shows that the I and C genes on the X chromosomes are approximately randomly assorted. The sequence arrangement on the plasmid pDm103 containing one repeat of rDNA (Glover et al., 1975) has been determined by similar methods. The I gene on this plasmid contains an inverted repeat stem. The occurrence of inverted repeat sequences flanking the insertion supports the speculation that these sequences are translocatable elements similar to procaryotic translocons.     

Sequence arrangement of the rRNA genes of the dipteran Sarcophaga bullata

Velocity sedimentation studies of RNA of Sarcophaga bullata show that the major rRNA species have sedimentation values of 26S and 18S. Analysis of the rRNA under denaturing conditions indicates that there is a hidden break centrally located in the 26S rRNA species. Saturation hybridization studies using total genomic DNA and rRNA show that 0.08% of the nuclear DNA is occupied by rRNA coding sequences and that the average repetition frequency of these coding sequences is approximately 144. The arrangement of the rRNA genes and their spacer sequences on long strands of purified rDNA was determined by the examination of the structure of rRNa:DNA hybrids in the electron microscope. Long DNA strands contain several gene sets (18S + 26S) with one repeat unit containing the following sequences in order given: (a) An 18S gene of length 2.12 kb, (b) an internal transcribed spacer of length 2.01 kb, which contains a short sequence that may code for a 5.8S rRNA, (c) A 26S gene of length 4.06 kb which, in 20% of the cases, contains an intron with an average length of 5.62 kb, and (d) an external spacer of average length of 9.23 kb.     

Direct repeats surrounding the ribosomal RNA genes of Physarum polycephalum

Sequence homology was found between the external transcribed spacer and the terminal non-transcribed spacer of Physarum polycephalum rDNA. The homologous sequences were located 2kb upstream from the 19s rRNA gene and 0.3kb downstream from 26S rRNA gene, respectively, and were arranged in a direct repeat manner. Sequence analyses showed that the direct repeats consisted of two parts: one was sequences of about 130bp which showed over 90% sequence homology with each other. The other consisted mainly of many tandem repeats of a 50 to 52bp unit. The direct repeat-rRNA genes-direct repeat unit was found to be flanked by short direct repetitious sequences. Based on these findings, the significance of the direct repeat is discussed in terms of evolution of rDNA.     

The tubulin genes of Trypanosoma cruzi

The organization of the alpha- and beta-tubulin genes in the genome of Trypanosoma cruzi have been analysed by Southern blotting using tubulin probes derived from Trypanosoma brucei. The tubulin array appears to be more complex in this organism than in other members of the same family. Some tubulin genes are tightly clustered in an alternating (alpha-beta)n array with a basic repeat unit length of 4.3 kb. However, other pairs of alternating alpha- and beta-tubulin sequences appear to be physically separated from the basic group. This finding indicates that the tubulin gene cluster present in T. cruzi is less perfectly conserved than in T. brucei. T. (Herpetosoma) rangeli is similar to T. (Schizotrypanum) cruzi in its tubulin gene organization whereas most of these genes are tandemly clustered in the genome of T. (Trypanozoon) evansi, with a basic repeat unit length of 3.6 kb as previously described for T. (Trypanozoon) brucei. Two overlapping recombinant clones containing T. cruzi tubulin sequences have been isolated from a genomic cosmid library of T. cruzi epimastigotes using the T. brucei tubulin probes. Partial sequencing of the T. cruzi beta-tubulin gene has confirmed its identity and shows more than 70% homology with the sea urchin, chicken and T. b. rhodesiense beta-tubulin reported gene sequences. Analysis of tubulin gene organization through the parasite life cycle does not show evidence of major rearrangements within the repeat unit. Several T. cruzi strains and cloned lines whilst sharing the 4.3-kb tubulin repeat unit, exhibited very variable tubulin gene organization with tubulin probes. These striking differences in the organization of this structural gene among T. cruzi strains and cloned lines suggest that the heterogeneity previously reported in parasite populations may be related to a very dynamic, diploid genome.     

Sequence organization of a cloned tDNA1met fragment from xenopus laevis

3.18 kb fragments of X. laevis DNA coding for tRNA₁^met have been inserted into a λ vector via Hind III termini and cloned in E. coli. The organization of one cloned fragment has been analyzed by restriction endonuclease digestion and RNA-DNA hybridization. From the distribution of sites for three enzymes, this fragment appears to be typical of the majority of λ. laevis tandem tDNA₁^met repeat units. Evidence is presented to suggest that it contains two genes coding for tRNA₁^met and at least one gene coding for a second as yet unidentified 4S RNA species. The two tRNA₁^met genes are located on the same DNA strand 0.96 and 1.38 kb from one end of the repeat unit. A detailed restriction map for 19 enzymes reveals that the spacers between these genes are not identical, and it provides no indication of short repetitive sequence elements within the spacers.     

A physical map of the ribosomal DNA repeat unit of Aspergillus nidulans

The ribosomal DNA repeat unit of Aspergillus nidulans has been cloned in pBR322 and a restriction map constructed. The genes coding for the 17S, 5.8S and 25S rRNAs are found in blocks separated by a 1.7 kb spacer region, with the 5.8S RNA gene lying between the genes for the two larger RNAs. The total length of the repeat unit is 7.7 kb. The 5S rRNA is not present in the repeat unit.     

Investigations of 5S rDNA of Vitis vinifera L.: sequence analysis and physical mapping.

Here we report the first results of a study of 5S rDNA of Vitis vinifera. 5S rDNA sequences from seven genotypes were amplified by PCR, cloned, and sequenced. Three types of repeats were found. Two variants, denominated long repeat and short repeat, appeared to be the main components of the 5S rDNA of this species, since they were found in all genotypes analyzed. They differed markedly from each other in both the length and the nucleotide composition of the spacers. The third variant, classified as DEL short repeat, differs from the short repeat owing to a large deletion in the spacer region. It appears to be the most recent repeat type, since it was identified in only one genotype. The organization of the 5S rDNA repeat unit variants was investigated by amplifying the genomic DNA with primers designed on the sequence of the long and short spacers. The PCR-amplified fragments showed that the long repeat is associated with the other two repeats, indicating that in V. vinifera different repeat units coexist within the same tandem array. FISH analysis demonstrated that 5S rRNA genes are localized at a single locus. The variability of 5S rDNA repeats is discussed in relation to the putative allopolyploid origin of V. vinifera.     

Isolation and sequence organization of human ribosomal DNA.

The genes coding for 28 S and 18 S ribosomal RNA have been purified from leukemic leukocytes of one human individual by density gradient centrifugation. The purified ribosomal DNA was analyzed by restriction endonuclease digestion and electron microscopy. The location of cleavage sites for the restriction endonuclease EcoRI was established by R-loop mapping of restriction fragments by electron microscopy. The results are in agreement with gel analysis and gel transfer hybridization. One type of ribosomal DNA repeating unit contains four cleavage sites for EcoRI. Two of these cuts are located in the genes coding for 28 S and 18 S rRNA, while the other two are in the non-transcribed spacer. Thus, one of the restriction fragments generated contains non-transcribed spacer sequences only and is not detected by gel transfer hybridization if labeled rRNA is used as the hybridization probe. A second type of repeating unit lacks one of the EcoRI cleavage sites within the non-transcribed spacer. This indicates that sequence heterogeneity exists in human rDNA spacers. R-loop mapping of high molecular weight rDNA in the electron microscope reveals that the majority of repeats are rather uniform in length. The average size of 22 repeats was 43.65(±1.27) kb. Two repeats were found with lengths of 28.6 and 53.9 kb, respectively. This, and additional evidence from gels, indicates that some length heterogeneity does exist in the non-transcribed spacer. The structure of the human rDNA repeat is summarized in Figure 10.     

Occurrence of 9 homologous repeat units in the external spacer region of a nuclear maize rRNA gene unit.

A 14 kb maize DNA fragment carrying nuclear rRNA genes and spacer regions was isolated and characterised by restriction enzyme mapping. A complete 3020 bp long external spacer region was sequenced and revealed 9 tandemly arranged 200 bp long repeat units with high homology. The repeat units lie upstream from two prominent S1 mapping signals. The sequence of a typical repeat unit is compared to a corresponding 130 bp long wheat repeat unit. The possible functional relevance of the repeat units is discussed.     

The 5.8S RNA gene sequence and the ribosomal repeat of Schizosaccharomyces pombe

We have characterized the rRNA gene repeat in Schizosaccharomyces pombe. This repeat, which does not contain the 5S RNA gene, is found in a 10.4 kb HindIII DNA fragment. We have determined the nucleotide sequences of the S. pombe 5.8S RNA gene and intergenic spacers from two different 10.4 kb DNA fragments. Analysis of isolated total cellular 5.8S RNA revealed the presence of eight species of 5.8S RNA, differing in the number of nucleotides at the 5'-end. The eight 4.8S RNA species vary in length from 158 to 165 nucleotides. Apart from the heterogeneity observed at the 5'-end, the sequence of the eight 5.8S RNA species appears to be identical and is the same sequence as coded for by the 5.8S genes. The gene sequence shows great homology to the 5.8S RNA genes or S. cerevisiae and N. crassa. Most of the base differences are confined to the highly variable stem though to be involved in co-axial helix stacking with the 25S RNA, where base pairing is nearly identical despite the sequence differences. Secondary structure models are examined in light of 5.8S RNA oligonucleotide conservation across species from yeasts to higher eukaryotes.     

A minor class of 5S rRNA genes in Saccharomyces cerevisiae X2180-1B, one member of which lies adjacent to a Ty transposable element

In Saccharomyces cerevisiae the majority of the genes for 5S rRNA lie within a 9kb rDNA sequence that is present as 100-200 tandemly-repeated copies on Chromosome XII. Following our observations that about 10% of yeast 5S rRNA exists as minor variant sequences, we screened a collection of yeast DNA fragments cloned in lambda gt for 5S rRNA genes whose flanking sequences differed from those adjacent to 5S rRNA genes of the rDNA repeat. Three variant 5S rRNA genes were isolated on the basis of such dissimilarity to rDNA repeat sequences. They display a remarkable conservation of their DNA in the vicinity of the 5S coding region, and are examples of a minor form of 5S rRNA coding sequence present in a small number of copies in the yeast genome. These variant sequences appear to be transcribed as efficiently as 5S rRNA genes of the rDNA repeat. In one of our isolates of the variant sequence a Ty transposable element is inserted 145bp upstream of the initiation point for 5S rRNA synthesis.     

Isolation and characterization of Chinese hamster ribosomal DNA clones

We have examined the ribosomal RNA (rRNA) genes of the Chinese hamster ovary (CHO) cell line. A partial EcoRI library of genomic CHO DNA was prepared using lambda Charon-4A. We isolated two recombinants containing the region transcribed as 45S pre-rRNA and 13 kb of external spacer flanking 5' and 3' to the transcribed region. These sequences show restriction site homology with the vast majority of the genomic sequences complementary to rRNA. In addition to this form of rDNA, Southern blot analysis of EcoRI-cut CHO genomic DNA reveals numerous minor fragments ranging from 2 to 19 kb which are complementary to 18S rRNA. We isolated one clone which contains the 18S rRNA gene and sequences 5' which appear to contain length heterogeneity within the non-transcribed spacer region. We have nine additional cloned EcoRI fragments in which the homology with 18S rRNA is limited to a 0.9-kb EcoRI-HindIII fragment. This EcoRI-HindIII fragment is present in each of the cloned EcoRI fragments, and is flanked on both sides by apparently nonribosomal sequences which bear little restriction site homology with each other or the major cloned rDNA repeat.     

Inverted repeat sequences in the drosophila genome

The properties of inverted repeat (foldback) sequences in Drosophila melanogaster DNA have been studied by HAP chromatography and electron microscope methods. Electron microscope observations show that there is a broad distribution of lengths of the duplex regions of the inverted repeats from very short to greater than 15 kb, with number and weight average values of 1.35 kb and 5.0 kb respectively. About 20% of the inverted repeats are separated by a single-strand spacer with lengths too short to observe, but the other 80% have spacers, P, with lengths ranging from 0.5 kb to greater than 30 kb. The number average and weight average spacer lengths for the total sample are 2.7 kb and 6.1 kb. With respect to the lengths of the spacers, P, between inverted repeats, the Drosophila genome differs from that of most organisms which have been studied where the spacers P are mostly too short to be measured. EM and HAP studies suggest that the average center-to-center spacing between sets of inverted repeats is 40–80 kb. The HAP studies show that there is a broad range of thermal stabilities for the duplexes formed by reassociation of inverted repeat sequences. Kinetic analysis shows that all of the frequency components of the Drosophila genome are present in the inverted repeats, the loops P, and the flanking sequences. There is a somewhat larger proportion of middle repetitive DNA in those inverted repeat duplexes which are resistant to digestion by Mung Bean Endonuclease I. These enzyme resistant duplexes comprise about 3% of the entire genome. It is estimated that there are approximately 2000–4000 inverted repeat pairs in the entire genome.