Determination of benidipine in human plasma using liquid chromatography-tandem mass spectrometry

Fumonisins are water soluble mycotoxins produced by the fungus Fusarium verticillioides (formerly F. moniliforme). Fumonisin B(1) (FB(1)) is a diester of propane-1,2,3-tricarboxylic acid and 2-amino-12, 16-dimethyl-3,5,10,14,15-pentahydroxyeicosane, and is the most abundant of the naturally occurring fumonisins. Upon removal of the two tricarballylic acid side chains, the structure is referred to as hydrolyzed FB(1) (HFB(1)). FB(1) and HFB(1) are structurally similar to sphinganine, a sphingoid base. The fumonisins do not absorb UV light or fluoresce; therefore, derivatizing reagents are used for detection when separation is by high performance liquid chromatography (HPLC). The standard derivatizing reagent used for HPLC is ortho-phthalaldehyde (OPA) plus 2-mercaptoethanol (ME) reaction partner, however, the OPA-FB(1) derivative is not stable at room temperature. The objectives of this study were to: (1). determine the effect of temperature on the stability of the OPA-FB(1) derivative and (2). determine which structural characteristics of FB(1) contribute to the instability of the OPA-FB(1) derivative. The results indicate that OPA-FB(1), OPA-FB(3) and OPA-HFB(1) derivatives are unstable at 24 degrees C but that their stability improves significantly at 4 degrees C. The OPA-sphinganine derivative is stable for at least 24h at 24 degrees C. Thus, the instability of the OPA-FB(1) derivative may be attributed to its lack of a hydroxyl group at the carbon 1 position.     

Thioredoxin reductase-1 knock down does not result in thioredoxin-1 oxidation

The active site of thioredoxin-1 (Trx1) is oxidized in cells with increased reactive oxygen species (ROS) and is reduced by thioredoxin reductase-1 (TrxR1). The purpose of the present study was to determine the extent to which the redox state of Trx1 is sensitive to changes in these opposing reactions. Trx1 redox state and ROS generation were measured in cells exposed to the TrxR1 inhibitors aurothioglucose (ATG) and monomethylarsonous acid (MMA(III)) and in cells depleted of TrxR1 activity by siRNA knock down. The results showed that all three treatments inhibited TrxR1 activity to similar extents (90% inhibition), but that only MMA(III) exposure resulted in oxidation of Trx1. Similarly, ROS levels were elevated in response to MMA(III), but not in response to ATG or TrxR1 siRNA. Therefore, TrxR1 inhibition alone was not sufficient to oxidize Trx1, suggesting that Trx1-independent pathways should be considered when evaluating pharmacological and toxicological mechanisms involving TrxR1 inhibition.     

Vaccination of lactating dairy cows for the prevention of aflatoxin B1 carry over in milk

The potential of anaflatoxin B(1) (AnAFB(1)) conjugated to keyhole limpet hemocyanin (KLH) as a vaccine (AnAFB(1)-KLH) in controlling the carry over of the aflatoxin B(1) (AFB(1)) metabolite aflatoxin M(1) (AFM(1)) in cow milk is reported. AFB(1) is the most carcinogenic compound in food and foodstuffs amongst aflatoxins (AFs). AnAFB(1) is AFB(1) chemically modified as AFB(1)-1(O-carboxymethyl) oxime. In comparison to AFB(1), AnAFB(1) has proven to be non-toxic in vitro to human hepatocarcinoma cells and non mutagenic to Salmonella typhimurium strains. AnAFB(1)-KLH was used for immunization of cows proving to induce a long lasting titer of anti-AFB(1) IgG antibodies (Abs) which were cross reactive with AFB(1), AFG(1), and AFG(2). The elicited anti-AFB(1) Abs were able to hinder the secretion of AFM(1) into the milk of cows continuously fed with AFB(1). Vaccination of lactating animals with conjugated AnAFB(1) may represent a solution to the public hazard constituted by milk and cheese contaminated with AFs.     

Hexanal phenylhydrazone is a mechanism-based inactivator of soybean lipoxygenase 1

Hexanal phenylhydrazone (1; 70:30 E:Z mixture) at micromolar concentration irreversibly inactivates soybean lipoxygenase 1 (L-1) in the presence of dioxygen. L-1 catalyzes the oxidation of 1 into its alpha-azo hydroperoxide 2 [C5H11CH(OOH)N = NC6H5]. 2 is an efficient inactivator of L-1. The aerobic reaction between 1 and L-1 follows a branched pathway leading to the release of 2 into the medium or to L-1 inactivation. The respective parameters corresponding to this inactivation by the (E)-1 and (Z)-1 isomers are Ki = 0.25 and 0.40 microM and kinact = 0.8 and 2.1 min-1. Linoleic acid protection agrees with a mechanism-based inactivation process. The oxidation of a minimum of 13 +/- 3 molar equiv of 1 is required for complete L-1 inactivation, but up to 70 equiv is necessary in the presence of a very large excess of 1. The inactivation is actually the result of two pathways: one is due to a reaction of 2 as soon as it is formed at the active site (20%); the other is due to 2 released into the medium and coming back to the active site (80%). The inactivation is accompanied by the oxidation of 1.8 +/- 0.8 methionine residues of the protein into the corresponding sulfoxide. The inactivated L-1 is electron paramagnetic resonance (EPR) silent with an effective magnetic moment of mu = 5.0 +/- 0.1 Bohr magnetons corresponding to an S = 2 spin state. An inactivation mechanism is proposed on the basis of EPR and magnetic susceptibility data obtained from the anaerobic and aerobic reactions of L-1 with 1 and 2.     

FTIR spectra of solid poly-l-lysine in the stretching NH mode range

Three bands at 3270 cm(-1), 3200 cm(-1) and 3030 cm(-1) are found in the IR stretching proton (nu(1)) mode spectral range in spectra of solid poly-l-lysine (PLL). Strong quantitative changes of these bands are observed in samples dried from water solutions with different pH. The narrow band at 3270 cm(-1), which is strong in the spectrum of PLL precipitated from pH=12 alkaline medium, is assigned to the nu(1) peptide proton mode of NH-CO (amide A) of the beta-sheet structure type. The band at 3200 cm(-1), which is intensified in PLL precipitated from pH=1 acidic medium, relates to the nu(1) peptide mode in the random coil structure. The band at 3030 cm(-1), whose peak intensity increases two-fold in going from alkaline to acidic medium, is assigned to the nu(1) modes of protonated NH(3)(+) side chain groups. The frequencies of all bands were used for estimating H-bond energy relying on an empirical correlation between this property and the red shift of the nu(1) band. The enthalpy of the secondary structure transition from beta-sheet to the random coil, which is observed in PLL at the change of pH from 11 to 1 amounts to 4.7 kJ mol(-1).     

Phosphodiesterase A1, a regulator of cellulose synthesis in Acetobacter xylinum, is a heme-based sensor

The phosphodiesterase A1 protein of Acetobacter xylinum, AxPDEA1, is a key regulator of bacterial cellulose synthesis. This phosphodiesterase linearizes cyclic bis(3'-->5')diguanylic acid, an allosteric activator of the bacterial cellulose synthase, to the ineffectual pGpG. Here we show that AxPDEA1 contains heme and is regulated by reversible binding of O(2) to the heme. Apo-AxPDEA1 has less than 2% of the phosphodiesterase activity of holo-AxPDEA1, and reconstitution with hemin restores full activity. O(2) regulation is due to deoxyheme being a better activator than oxyheme. AxPDEA1 is homologous to the Escherichia coli direct oxygen sensor protein, EcDos, over its entire length and is homologous to the FixL histidine kinases over only a heme-binding PAS domain. The properties of the heme-binding domain of AxPDEA1 are significantly different from those of other O(2)-responsive heme-based sensors. The rate of AxPDEA1 autoxidation (half-life > 12 h) is the slowest observed so far for this type of heme protein fold. The O(2) affinity of AxPDEA1 (K(d) approximately 10 microM) is comparable to that of EcDos, but the rate constants for O(2) association (k(on) = 6.6 microM(-)(1) s(-)(1)) and dissociation (k(off) = 77 s(-)(1)) are 2000 times higher. Our results illustrate the versatility of signal transduction mechanisms for the heme-PAS class of O(2) sensors and provide the first example of O(2) regulation of a second messenger.     

The IF(1) inhibitor protein of the mitochondrial F(1)F(0)-ATPase

Recent studies on the IF(1) inhibitor protein of the mitochondrial F(1)F(0)-ATPase from molecular biochemistry to possible pathophysiological roles are reviewed. The apparent mechanism of IF(1) inhibition of F(1)F(0)-ATPase activity and the biophysical conditions that influence IF(1) activity are summarized. The amino acid sequences of human, bovine, rat and murine IF(1) are compared and domains and residues implicated in IF(1) function examined. Defining the minimal inhibitory sequence of IF(1) and the role of conserved histidines and conformational changes using peptides or recombinant IF(1) is reviewed. Luft's disease, a mitochondrial myopathy where IF(1) is absent, is described with respect to IF(1) relevance to mitochondrial bioenergetics and clinical observations. The possible pathophysiological role of IF(1) in conserving ATP under conditions where cells experience oxygen deprivation (tumor growth, myocardial ischemia) is evaluated. Finally, studies attempting to correlate IF(1) activity to ATP conservation in myocardial ischemic preconditioning are compared.     

The hairpin structure of the (6)F1(1)F2(2)F2 fragment from human fibronectin enhances gelatin binding

The solution structure of the (6)F1(1)F2(2)F2 fragment from the gelatin-binding region of fibronectin has been determined (Protein Data Bank entry codes 1e88 and 1e8b). The structure reveals an extensive hydrophobic interface between the non-contiguous (6)F1 and (2)F2 modules. The buried surface area between (6)F1 and (2)F2 ( approximately 870 A(2)) is the largest intermodule interface seen in fibronectin to date. The dissection of (6)F1(1)F2(2)F2 into the (6)F1(1)F2 pair and (2)F2 results in near-complete loss of gelatin-binding activity. The hairpin topology of (6)F1(1)F2(2)F2 may facilitate intramolecular contact between the matrix assembly regions flanking the gelatin-binding domain. This is the first high-resolution study to reveal a compact, globular arrangement of modules in fibronectin. This arrangement is not consistent with the view that fibronectin is simply a linear 'string of beads'.     

Structural basis of the Cks1-dependent recognition of p27(Kip1) by the SCF(Skp2) ubiquitin ligase

The ubiquitin-mediated proteolysis of the Cdk2 inhibitor p27(Kip1) plays a central role in cell cycle progression, and enhanced degradation of p27(Kip1) is associated with many common cancers. Proteolysis of p27(Kip1) is triggered by Thr187 phosphorylation, which leads to the binding of the SCF(Skp2) (Skp1-Cul1-Rbx1-Skp2) ubiquitin ligase complex. Unlike other known SCF substrates, p27(Kip1) ubiquitination also requires the accessory protein Cks1. The crystal structure of the Skp1-Skp2-Cks1 complex bound to a p27(Kip1) phosphopeptide shows that Cks1 binds to the leucine-rich repeat (LRR) domain and C-terminal tail of Skp2, whereas p27(Kip1) binds to both Cks1 and Skp2. The phosphorylated Thr187 side chain of p27(Kip1) is recognized by a Cks1 phosphate binding site, whereas the side chain of an invariant Glu185 inserts into the interface between Skp2 and Cks1, interacting with both. The structure and biochemical data support the proposed model that Cdk2-cyclin A contributes to the recruitment of p27(Kip1) to the SCF(Skp2)-Cks1 complex.     

Mapping the active site of endothelin-converting enzyme-1 through subsite specificity and mutagenesis studies: a comparison with neprilysin

Endothelin-converting enzyme-1 (ECE-1) is a membrane-bound zinc metallopeptidase that is homologous to neprilysin in amino acid sequence. A major in vivo function of ECE-1 is the generation of endothelin-1, a potent vasoconstrictor, from big endothelin-1. ECE-1 is also potentially involved in the processing or degradation of other peptide hormones. In this study we have used substrates based on the sequence of the COOH-terminal half of big endothelin-1 to examine the subsite specificity of recombinant ECE-1. The big endothelin-1 [16-38] peptides were systematically varied at either position 21 (P(1)) or position 22 (P'(1)) and used in steady-state kinetic analyses of ECE-1. The results indicate that the S(1) pocket of ECE-1 is relatively nonselective, but that the S'(1) subsite of ECE-1 has a preference for large hydrophobic side chains. The peptidyl carboxydipeptidase activity of ECE-1 was also characterized, revealing that substrates with COOH-terminal carboxylates are highly preferred over the cognate amides and esters. A site-directed mutagenesis study was carried out to identify the active-site amino acid residues specifically involved in binding to the COOH-terminal carboxylate of substrates. The data indicate that Arg(133) of ECE-1, which corresponds to Arg(102) of neprilysin that has been identified as an active-site residue of neprilysin involved in binding to the free carboxylate of some substrate peptides, may not play the same role. However, the low activity observed for an ECE-1 Arg(726) mutant is consistent with a role for this arginine residue in the binding of substrates, a role which has been ascribed to arginine residues in both thermolysin (Arg(203)) and neprilysin (Arg(717)).     

The hydrolytic and transferase action of alternanase on oligosaccharides.

Alternanase is an enzyme which endo-hydrolytically cleaves the alpha-(1-->3), alpha-(1-->6)-linked D-glucan, alternan. The main products are isomaltose, alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-D-Glc and the cyclic tetrasaccharide cyclo[-->6)-alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->]. It is also capable of acting on oligosaccharide substrates. The cyclic tetrasaccharide is slowly hydrolyzed to isomaltose. Panose and the trisaccharide alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->3)-D-Glc both undergo transglycosylation reactions to give rise to the cyclic tetrasaccharide plus D-glucose, with panose being converted at a much faster rate. The tetrasaccharide alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->4)-D-Glc is hydrolyzed to D-glucose plus the trisaccharide alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-D-Glc. Alternanase does not act on isomaltotriose, theanderose (6(Glc)-O-alpha-D-Glcp sucrose), or alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->4)-alpha-D-Glc. The enzyme releases 4-nitrophenol from 4-nitrophenyl alpha-isomaltoside, but not from 4-nitrophenyl alpha-D-glucopyranoside, 4-nitrophenyl alpha-isomaltotrioside, or 4-nitrophenyl alpha-isomaltotetraoside.     

Conformation analysis of modified tetrasaccharide sequences of the N-glycoprotein type--problem of the alpha-(1 to 6)-glycosidic bond

The conformational analysis of the recently synthesized tetrasaccharides alpha-D-Manp (1----3)-[alpha-D-Manp-(1----6)]-4-deoxy-beta-D-lyx-hexp+ ++-(1----4)-D-GlcNAc (2) and alpha-D-Manp-(1----3)-[alpha-D-Manp-(1----6)]-beta-D-Talp -(1----4)-D-GlcNAc (3) will be described. The preferred solution conformation of 2 and 3 is a gt-conformation, which is nearly identical with the preferred conformation of the naturally occurring tetrasaccharide alpha-D-Manp-(1----3)-[alpha-D-Manp-(1----6)]-beta-D-Manp -(1----4)-D-GlcNAc (1). The main structural feature is the backfolding of the alpha-(1----6)-linked D-Man to the reducing D-GlcNAc unit. Conformational analysis of the tetrasaccharides alpha-D-Manp-(1----3)-[alpha-D-Manp-(1----6)]-beta-D-Manp -(1----4)-1,6- anhydro-beta-D-GlcNAc (4), alpha-D-Manp-(1----3)-alpha-D-Manp-(1----6)]-4-deoxy-beta-D- lyx-hexp-(1----4)- 1,6-anhydro-beta-D-GlcNAc (5), and alpha-D-Manp-(1----3)-[alpha-D-Manp-(1----6)]-beta-D-Talp -(1----4)- 1,6-anhydro-beta-D-GlcNAc (6) gave additional proof for this backfolding. The substitution of the reducing unit leads to a smaller amount of gt- and a greater amount of gg-conformers. The method used for conformational analysis of 2-6 is a combination of n.m.r.-experiments and HSEA-calculations with the program GESA. Concerning the application of new 2D-techniques, the COLOC-experiment turned out to be extremely useful in sequencing oligosaccharides.     

Purification and cloning of a Chinese red radish peroxidase that metabolise pelargonidin and forms a gene family in Brassicaceae

An anionic peroxidase RsPrx1 was purified (RZ=3.0) and characterized from roots of Chinese red radish (Raphanus sativus var. niger, Brassicaceae). The specific activity of RsPrx1 (micromol mg(-1) min(-1)) is 413.5 (ferulic acid); 258.7 (ABTS); 177.3 (caffeic acid) and 10.0 (guaiacol acid). The optimum pH is 4.0 (citrate buffer) using ABTS as substrate. RsPrx1 can utilise the red pigment present in the root, pelargonidin, as substrate and the specific activity is 93.6 micromol mg(-1) min(-1). The molecular mass of RsPrx1 is 45 kDa (denatured) and 46 kDa (native) as determined by SDS-PAGE and gel filtration, respectively. The isoelectric point (pI) determined by native IEF is 4.7 and by chromatofocusing (Mono P) is 5.1. Analysis of tryptic peptides by nanoscale liquid chromatography-tandem mass spectrometry (LC-MS/MS) covered 27% of the RsPrx1 sequence and confirmed its identity. The gene encoding RsPrx1 was cloned by PCR and the amino acid sequence showed the highest identity (82%) to peroxidase AtPrx22 and AtPrx23 from Arabidopsis thaliana and to HRPC3 and HRPE5 from horseradish, respectively. Activity-stained IEF gels show that RsPrx1 is primarily expressed in the roots in agreement with the expression profile of the orthologous genes. These five orthologous peroxidases have three introns of variable length and sequence at conserved locations between the distal and proximal histidine. The results suggest that RsPrx1 orthologs are widespread in the Brassicaceae plant family with a 15-residue-long C-terminal propeptide in common. Based on the results, we propose that RsPrx1 and orthologs are targeted to the vacuoles to modify stored anthocyanins like pelargonidin.     

Fine Physical Mapping of Ph1, a Chromosome Pairing Regulator Gene in Polyploid Wheat

The diploid-like chromosome pairing in polyploid wheat is controlled by the Ph1 (pairing homoeologous) gene that is located on chromosome arm 5BL. By using a combination of cytogenetic and molecular techniques, we report the physical location of the Ph1 gene to a submicroscopic chromosome region (Ph1 gene region) that is flanked by the breakpoints of two deletions (5BL-1 and ph1c) and is marked by a DNA probe (XksuS1). The Ph1 gene region is present distal to the breakpoint of deletion 5BL-1 but proximal to the C-band 5BL2.1. Two other DNA probes (Xpsr128 and Xksu75) flank the region-Xpsr128 being proximal and Xksu75 being distal. The estimated size of the region is less than 3 Mb. The chromosome region around the Ph1 gene is high in recombination as the genetic distance of the region between 5BL-1 breakpoint and C-band 5BL2.1 (not resolved by the microscope) is at least 9.3 cM.     

Identification of novel beta1 integrin binding sites in the type 1 and type 2 repeats of thrombospondin-1

In addition to the three known beta(1) integrin recognition sites in the N-module of thrombospondin-1 (TSP1), we found that beta(1) integrins mediate cell adhesion to the type 1 and type 2 repeats. The type 1 repeats of TSP1 differ from typical integrin ligands in that recognition is pan-beta(1)-specific. Adhesion of cells that express one dominant beta(1) integrin on immobilized type 1 repeats is specifically inhibited by antagonists of that integrin, whereas adhesion of cells that express several beta(1) integrins is partially inhibited by each alpha-subunit-specific antagonist and completely inhibited by combining the antagonists. beta(1) integrins recognize both the second and third type 1 repeats, and each type 1 repeat shows pan-beta(1) specificity and divalent cation dependence for promoting cell adhesion. Adhesion to the type 2 repeats is less sensitive to alpha-subunit antagonists, but a beta(1) blocking antibody and two disintegrins inhibit adhesion to immobilized type 2 repeats. beta(1) integrin expression is necessary for cell adhesion to the type 1 or type 2 repeats, and beta(1) integrins bind in a divalent cation-dependent manner to a type 1 repeat affinity column. The widely used TSP1 function blocking antibody A4.1 binds to a site in the third type 2 repeat. A4.1 proximally inhibits beta(1) integrin-dependent adhesion to the type 2 repeats and indirectly inhibits integrin-dependent adhesion mediated by the TSP1 type 1 repeats. Although antibody A4.1 is also an antagonist of CD36 binding to TSP1, these data suggest that some biological activities of A4.1 result from antagonism of these novel beta(1) integrin binding sites.     

Cu(I) affinities of the domain 1 and 3 sites in the human metallochaperone for Cu,Zn-superoxide dismutase

The delivery of copper by the human metallochaperone CCS is a key step in the activation of Cu,Zn-superoxide dismutase (SOD1). CCS is a three-domain protein with Cu(I)-binding CXXC and CXC motifs in domains 1 and 3, respectively. A detailed analysis of the binding of copper to CCS, including variants in which the Cys residues from domains 1 and 3 have been mutated to Ser, and also using separate domain 1 and 3 constructs, demonstrates that CCS is able to bind 1 equiv of Cu(I) in both of these domains. The Cu(I) affinity of domain 1 is approximately 5 × 10(17) M(-1) at pH 7.5, while that of domain 3 is at least 1 order of magnitude weaker. The CXXC site will therefore be preferentially loaded with Cu(I), suggesting that domain 1 plays a role in the acquisition of the metal. The delivery of copper to the target occurs via domain 3 whose structural flexibility and ability to be transiently metalated during copper delivery appear to be more important than the Cu(I) affinity of its CXC motif. The Cu(I) affinity of domain 1 of CCS is comparable to that of HAH1, another cytosolic copper metallochaperone. CCS and HAH1 readily exchange Cu(I), providing a mechanism whereby cross-talk can occur between copper trafficking pathways.     

The Arabidopsis kinase-associated protein phosphatase regulates adaptation to Na+ stress

The kinase-associated protein phosphatase (KAPP) is a regulator of the receptor-like kinase (RLK) signaling pathway. Loss-of-function mutations rag1-1 (root attenuated growth1-1) and rag1-2, in the locus encoding KAPP, cause NaCl hypersensitivity in Arabidopsis thaliana. The NaCl hypersensitive phenotype exhibited by rag1 seedlings includes reduced shoot and primary root growth, root tip swelling, and increased lateral root formation. The phenotype exhibited by rag1-1 seedlings is associated with a specific response to Na(+) toxicity. The sensitivity to Na(+) is Ca(2+) independent and is not due to altered intracellular K(+)/Na(+). Analysis of the genetic interaction between rag1-1 and salt overly sensitive1 (sos1-14) revealed that KAPP is not a component of the SOS signal transduction pathway, the only Na(+) homeostasis signaling pathway identified so far in plants. All together, these results implicate KAPP as a functional component of the RLK signaling pathway, which also mediates adaptation to Na(+) stress. RLK pathway components, known to be modulated by NaCl at the messenger RNA level, are constitutively down-regulated in rag1-1 mutant plants. The effect of NaCl on their expression is not altered by the rag1-1 mutation.     

Identification of functional domains of Mid1, a stretch-activated channel component, necessary for localization to the plasma membrane and Ca2+ permeation

The Saccharomyces cerevisiae MID1 gene product (Mid1) is a stretch-activated Ca(2+)-permeable channel component required for Ca2+ influx and the maintenance of viability of cells exposed to the mating pheromone, alpha-factor. It is composed of 548-amino-acid (aa) residues with four hydrophobic segments, H1 (aa 2-22), H2 (aa 92-111), H3 (aa 337-356) and H4 (aa 366-388). It also has 16 putative N-glycosylation sites. In this study, sequentially truncated Mid1 proteins conjugated with GFP were expressed in S. cerevisiae cells. The truncated protein containing the region from H1 to H3 (Mid1(1-360)-GFP) localized normally in the plasma and endoplasmic reticulum (ER) membranes and complemented the low viability and Ca(2+)-uptake activity of the mid1 mutant, whereas Mid1(1-133)-GFP containing the region from H1 to H2 did not. Mid1(Delta3-22)-GFP lacking the H1 region failed to localize in the plasma membrane. Membrane fractionation showed that Mid1(1-22)-GFP containing only H1 localized in the plasma membrane in the presence of alpha-factor, suggesting that H1 is a signal sequence responsible for the alpha-factor-induced Mid1 delivery to the plasma membrane. The region from H1 to H3 is required for the localization of Mid1 in the plasma and ER membranes. Finally, trafficking of Mid1-GFP to the plasma membrane was dependent on the N-glycosylation of Mid1 and the transporter protein Sec12.