Hydrolysis and transformation of cellulose with Aspergillus niger IBT-90 enzymes

Hydrolysis and transformation of Fibrenier cellulose (USA) with enzymes from Aspergillus niger IBT-90 was studied. The process was performed at 50°C and pH 4.8 for 24 h using an enzyme complex either as a properly diluted culture filtrate or as a mixture of isolated and purified enzymes from A.niger IBT-90. In the latter experiments, enzyme-substrate ratios expressed as units of activity per 1 g of cellulose were as follows: endoglucanase E₁ and E₂, 40; β-glucosidase, 40 and cellobio-hydrolase, 2. Cellulose concentration was 5%. It was proved that the crude celluloytic complex from A. niger IBT-90 exhibits higher efficiency in the decomposition of cellulose in comparison to the mixture of enzymes isolated from this complex, as was revealed in assays of reducing sugars and determinations of light transmission throughout cellulose fibres using a computer analysis of the microscopic image. Comparison of both the endoglucanases E₁ and E₂ showed that the first enzyme is more active against cellulose. It liberated more reducing sugars and caused more significant decomposition of fibres. The predominant effect of the endoglucanase E₂ was a smoothing of the fibre surface. The cellobiohydrolase split a cellulose fibre into many short fibres.     

Some properties of eucalyptus kraft pulp treated with xylanase from Aspergillus niger

An Aspergillus niger isolate produced about 2500nkat xylanase/ml when cultivated in a medium containing 3% xylose. Application of the crude xylanolytic preparation to unbleached eucalyptus kraft pulp resulted in a decreased kappa number and increased brightness. Handsheets made from the xylanase-treated pulp after ECF bleaching retained good structural and mechanical characteristics.     

Structural basis for inhibition of Aspergillus niger xylanase by triticum aestivum xylanase inhibitor-I

Plants developed a diverse battery of defense mechanisms in response to continual challenges by a broad spectrum of pathogenic microorganisms. Their defense arsenal includes inhibitors of cell wall-degrading enzymes, which hinder a possible invasion and colonization by antagonists. The structure of Triticum aestivum xylanase inhibitor-I (TAXI-I), a first member of potent TAXI-type inhibitors of fungal and bacterial family 11 xylanases, has been determined to 1.7-A resolution. Surprisingly, TAXI-I displays structural homology with the pepsin-like family of aspartic proteases but is proteolytically nonfunctional, because one or more residues of the essential catalytical triad are absent. The structure of the TAXI-I.Aspergillus niger xylanase I complex, at a resolution of 1.8 A, illustrates the ability of tight binding and inhibition with subnanomolar affinity and indicates the importance of the C-terminal end for the differences in xylanase specificity among different TAXI-type inhibitors.     

Overproduction and characterization of xylanase B from Aspergillus niger

The xynB gene, which encodes endo-beta-1,4-xylanase XynB, in Aspergillus niger BRFM281 was amplified by RT-PCR using mRNA isolated from a culture containing sugar beet pulp as an inducer. The cDNA was cloned into an expression cassette under the control of the strong and constitutive glyceraldhehyde-3-phosphate dehydrogenase gene promoter. The expression system was designed to produce the recombinant enzyme XynB with a six-histidine peptide fused to the carboxy end of the protein. Homologous overproduction of XynB was successfully achieved in shake flask cultures, and the secretion yield was estimated to be 900 mg x L(-1). The recombinant XynB was purified 1.5-fold by immobilized metal affinity chromatography to homogeneity using a one-step purification protocol with 71% recovery. The purified recombinant enzyme was fully characterized and has a molecular mass of 23 kDa and an optimal activity at pH 5.5 and 50 degrees C with stability in the pH range 4.0-7.0 and temperature up to 50 degrees C. Using soluble oat spelts xylan, the determined Km and Vmax values were 7.1 mg x mL(-1) and 3881 U x mg(-1), respectively.     

Three-phase partitioning for simultaneous renaturation and partial purification of Aspergillus niger xylanase

Three-phase partitioning (TPP) is carried out by mixing ammonium sulfate and t-butanol to obtain organic phase, interfacial precipitate and aqueous phase. It is shown that TPP of an 8 M urea/100 mM dithiothreitol-denatured xylanase preparation resulted in simultaneous renaturation and purification. This integrated novel approach gave recovery of 93% enzyme activity with 21-fold purification. The implications of this in the context of recovering activity from inclusion bodies are discussed.     

Optimization of xylanase production from Aspergillus niger for biobleaching of eucalyptus pulp

A crude endo-xylanase produced by Aspergillus niger BCC14405 was investigated for its potential in pre-bleaching of chemical pulp from eucalyptus. The optimal fermentation conditions on the basis of optimization using response surface methodology included cultivation in a complex medium comprising wheat bran, rice bran, and soybean meal supplemented with yeast extract, glucose, peptone, and lactose with a starting pH of 6.0 for 7 d. This resulted in production of 89.5 IU/mL of xylanase with minor cellulase activity. Proteomic analysis using LC/MS/MS revealed that the crude enzyme was a composite of hemicellulolytic enzymes, including endo-β-1,4-xylanase and other hemicellulolytic enzymes attacking arabinoxylan and mannan. Pretreatment of the pulp at a xylanase dosage of 10 IU/g increased the brightness ceiling after the C-Eop-H bleaching step up to 3.0% using a chlorine charge with a C-factor of 0.16-0.20. Xylanase treatment also led to reduction in chlorine charge of at least 20%, with an acceptable brightness level. The enzyme pretreatment resulted in a slight increase in pulp viscosity, suggesting an increase in relative cellulose content. The crude enzyme was potent in the enzyme-aided bleaching of chemical pulp in an environmentally friendly pulping process.     

Isolation,purification and properties of tannase from Aspergillus niger van Tieghem

Tannase (tannin acyl hydrolase E.C. 3.1.1.20) has been isolated from Aspergillus niger van Tieghem and purified 29-fold. The enzyme had a temperature optimum of 60^°C, pH optimum of 6.0 with a second peak at pH 4.5, K_m of 0.20mM and V_max of 5.0mol min^–1 mg^–1protein.     

Isolation and characterization of the Aspergillus niger trpC gene

The Aspergillus niger trpC gene was isolated by complementation experiments with an Escherichia coli trpC mutant. Plasmid DNA containing the A. niger trpC gene transforms an Aspergillus nidulans mutant strain, defective in all three enzymatic activities of the trpC gene, to Trp+, indicating the presence of a complete and functional trpC gene. Southern blot analysis of DNA from these Trp+ transformants showed that plasmid DNA was present but that this DNA was not integrated at the site of the chromosomal trpC locus. The A. niger trpC gene was localized on the cloned fragment by heterologous hybridization experiments and sequence analysis. These experiments suggest that the organization of the A. niger trpC gene is identical to that of the analogous A. nidulans trpC and the Neurospora crassa trp-1 genes.     

Cloning of the xynNB gene encoding xylanase B from Aspergillus niger and its expression in Aspergillus kawachii

Aspergillus niger IFO 4066 produced two xylanases, xylanase A (XynNA) and xylanase B (XynNB), in culture medium, and these enzymes were purified. Acidophilic xylanase such as xylanase C (XynC) of white koji mold (Aspergillus kawachii IFO 4308) was not detected in A. niger cultures. However, results of Southern analysis using xynC cDNA of A. kawachii as a probe suggested that A. niger contained a gene homologous to xynC of A. kawachii. Therefore, we cloned this xylanase gene from A. niger. The predicted amino acid sequence of the cloned xylanase showed a homology to that of xynC of A. kawachii. However, a large number of amino acid substitutions were detected, especially in the N-terminal region. Both this cloned gene and xynC gene of A. kawachii had an intron at the same position in the coding region. The cloned gene was expressed in A. kawachii and a large quantity of xylanase was produced. The elution profile on an anion exchange chromatogram and the N-terminal amino acid sequence of the xylanase purified from the transformant were the same as those of XynNB. This confirmed that the cloned gene encoded XynNB.     

Production and properties of inulinase from Aspergillus niger

Summary A thermostable inulinase was identified in a strain of A. niger. The highest activity was observed at 50 °C (50 Lml^–1) and 77% and 34% of this was retained at 60° and 65°C, respectively. pH stability, the effect of thermal stabilizers such as Propylene glycol (10%) and Sorbitol (10%) and effects of different cations were investigated. It was found that the activity was completely inhibited by Ag⁺ and Hg²⁺, while Na⁺ had an activator effect.     

Purification and properties of Aspergillus niger beta-glucosidase.

Beta-glucosidase was purified from a crude cellulase preparation from Aspergillus niger by affinity chromatography on a methacrylamide-N-methylene-bis-methacrylamide copolymer bearing cellobiamine. The purified enzyme was a dimer with an isoelectric point of 4.0. The molecular mass of the enzyme was estimated to be 240 kDa by gel-permeation chromatography. The enzyme hydrolyzed specifically beta-glucosidic bonds and catalyzed transglucosylation of the beta-glucosyl group of cellobiose to yield 4-O-beta-gentiobiosylglucose in the presence of organic solvents or under neutral conditions.     

Rheological properties of Aspergillus niger pellet suspensions

Summary Shear diagrams for Aspergillus niger pellet suspensions were obtained using a helical ribbon impeller system. Experimental results concerning the effects of pellet size and surface nature on the rheological behaviour are given. In addition, the influence of the quantity of biomass was studied; it can be quantified by the model proposed by R. Wittler et al. (1983).Symbols b Fitting parameter eq. 5 (-) - C Fitting parameter eq. 5 (Pa s)^0.5 - c Maximum tangential velocity (-) - d _R Diameter of the ribbon impeller (mm) - Em Fitting parameter eq. 5 (-) - Ex Pellet volume fraction (or P.V.F.) (-) - H Height of the ribbon impeller (mm) - K Consistency index (Pa) (s) ⁿ - M Torque (arbitrary unit) - N Rotational speed (l) (s)^-1 - n Flow behaviour index (-) - _s Apparent viscosity of pellet suspension (Pa s) - p Width of the ribbon (mm) - s Pitch of the ribbon impeller (mm) - t Vessel diameter for the impeller-vessel system (mm) - Shear rate (s)^-1 - Shear stress (Pa)     

Catalytic properties of the immobilized Aspergillus tamarii xylanase

Xylanase from Aspergillus tamarii was covalently immobilized on Duolite A147 pretreated with the bifunctional agent glutaraldehyde. The bound enzyme retained 54.2% of the original specific activity exhibited by the free enzyme (120 U/mg protein). Compared to the free enzyme, the immobilized enzyme exhibited lower optimum pH, higher optimum reaction temperature, lower energy of activation, higher K_m (Michaelis constant), lower V_max (maximal reaction rate). The half-life for the free enzyme was 186.0, 93.0, and 50.0 min for 40, 50, and 60°C, respectively, whereas the immobilized form at the same temperatures had half-life of 320, 136, and 65 min. The deactivation rate constant at 60°C for the immobilized enzyme is about 6.0 × 10⁻³, which is lower than that of the free enzyme (7.77 × 10⁻³ min). The energy of thermal deactivation was 15.22 and 20.72 kcal/mol, respectively for the free and immobilized enzyme, confirming stabilization by immobilization. An external mass transfer resistance was identified with the immobilization carrier (Duolite A147). The effect of some metal ions on the activity of the free and immobilized xylanase has been investigated. The immobilized enzyme retained about 73.0% of the initial catalytic activity even after being used 8 cycles.     

Simple and rapid method for the isolation of Aspergillus niger mutants with enhanced cellulase and xylanase activity

Summary An agar plate isolation technique was developed for screening the mutants of Aspergillus niger. Fungal growth in solid media containing carboxymethylcellulose(CMC) was selected within 2–3 days. The mutants selected by the new technique showed a remarkable enhancement of CMCase, FPase, -glucosidase, xylanase, and -xylosidase activities. These results clearly show that the new isolation technique is a practical method for the selection of better strains.     

Improved xylanase production using apple pomace waste by Aspergillus niger in koji fermentation

Xylanase production by Aspergillus niger NRRL‐567 in solid‐state fermentation (koji fermentation) was optimized using 2⁴ factorial design and response surface methodology. The evaluated variables were the initial moisture level and concentration of inducers [veratryl alcohol (VA), copper sulphate (CS), and lactose (LAC)], leading to the response of xylanase production. Initial moisture level and LAC were found to be the most significant variable for xylanase production (p<0.05). The highest xylanase production was observed with 3578.8 ± 65.3 IU/gds (gram dry substrate) under optimal conditions using initial moisture of 85% (v/w), pH 5.0 and inducers VA (2 mM/kg), LAC 2% (w/w), and CS (1.5 mM/kg) after 48 h of incubation time. Higher xylanase activity of 3952 ± 78.3 IU/gds was attained during scale‐up of the process in solid‐state tray fermentation under optimum conditions after 72 h of incubation time. The present study demonstrates that A. niger NRRL‐567 can efficiently be used to achieve xylanase production with an economical and environmental benefit in solid‐state tray fermentation. The developed process can be used to develop an effective process for commercially feasible bioproduction of xylanases for speciality applications, such as conversion of lignocellulosic biomass to biofuels and other value‐added products.