Characterization of insertion sequence IS892 and related elements from the cyanobacterium Anabaena sp. strain PCC 7120.

IS892, one of the several insertion sequence (IS) elements discovered in Anabaena sp. strain PCC 7120 (Y. Cai and C. P. Wolk, J. Bacteriol. 172:3138-3145, 1990), is 1,675 bp with 24-bp near-perfect inverted terminal repeats and has two open reading frames (ORFs) that could code for proteins of 233 and 137 amino acids. Upon insertion into target sites, this IS generates an 8-bp directly repeated target duplication. A 32-bp sequence in the region between ORF1 and ORF2 is similar to the sequence of the inverted termini. Similar inverted repeats are found within each of those three segments, and the sequences of these repeats bear some similarity to the 11-bp direct repeats flanking the 11-kb insertion interrupting the nifD gene of this strain (J. W. Golden, S. J. Robinson, and R. Haselkorn, Nature [London] 314:419-423, 1985). A sequence similar to that of a binding site for the Escherichia coli integration host factor is found about 120 bp from the left end of IS892. Partial nucleotide sequences of active IS elements IS892N and IS892T, members of the IS892 family from the same Anabaena strain, were shown to be very similar to the sequence of IS892.     

ISZm1068: an IS5-like insertion element from Zymomonas mobilis

A new insertion sequence, designated ISZm1068, was isolated from Zymomonas mobilis strain CP4. This element consists of 1,068 bp and contains one major ORF which shows similarities both at the nucleotide and at the amino acid sequence level with the corresponding ORFs encoding the transposases of many IS5 family elements, in particular the IS1031 group. Moreover, the Z. mobilis ORF shares the conserved N2, N3 and C1 signature motifs of the IS4 and IS5 families. Six out of seven Z. mobilis wild-type strains were shown by hybridisation to contain a single copy of the ISZm1068 element. Nucleotide sequences of the insertion elements from these strains exhibited extremely high levels of identity, varying from 94.25 to 99.25%. ISZm1068 was shown to be active in Escherichia coli cells and led to plasmid replicon fusions within the host cell. Sequence analysis of rare cointegration and resolution derivatives suggests that ISZm1068 has putative imperfect inverted repeats at its extremities of 18 bp (IR-right) and 14 bp (IR-left), and that a 3-bp (5'-TCA-3') target sequence is duplicated upon insertion.     

Three new loci of insertion element IS1112 in Chinese strains of Xanthomonas oryzae pv. oryzae

Insertion sequence IS1112 is a repetitive element with a relatively high number of copies in Xanthomonas oryzae pv. oryzae (Xoo), the causal agent of bacterial blight of rice (Oryza sativa L.). Three new loci of IS1112 were identified in seven Chinese strains of Xoo using a single oligonucleotide primer J3; 5'-GCTCAGGTCAGGTGGCCTGG-3' by insertion-sequence-based polymerase chain reaction (IS-PCR). Among the three new loci of IS1112, two were located in the open-reading frame region of genes fhuA and cirA, which encode TonB-dependent receptors, and the third in ISXo2, another type of insertion sequence in Xoo genome. Three variants of IS1112 were identified in those three loci based on their sequence similarities: two were identical to IS1112a and IS1112b, reported in strain PXO86 from the Philippines, while the third was a new member of IS1112, defined as IS1112d. Inserting IS1112 in gene fhuA caused three bases, GGT, to be duplicated at the target site, but inserting it in gene cirA did not cause any duplication in the target site. The diversity of IS1112 sequence and insertion loci in Xoo genome and their potential effects are discussed.     

Nucleotide sequence analysis of IS427 and its target sites in Agrobacterium tumefaciens T37

We have determined the nucleotide sequence of IS427, an insertion sequence from Agrobacterium tumefaciens T37, IS427 is 1271 bp long, contains 16-bp imperfect terminal inverted repeats, and generates a 2-bp target sequence duplication. It is present at three sites in the pTiT37 plasmid and is absent from the chromosome of A. tumefaciens T37. Each of the IS427 elements sequenced was near a site with sequence homology to integration host factor (IHF)-binding sites which suggested that IHF may be involved in IS427 transposition.     

Structural and Functional Characterization of IS679 and IS66-Family Elements

A new insertion sequence (IS) element, IS679 (2,704 bp in length), has been identified in plasmid pB171 of enteropathogenic Escherichia coli B171. IS679 has imperfect 25-bp terminal inverted repeats (IRs) and three open reading frames (ORFs) (here called tnpA, tnpB, and tnpC). A plasmid carrying a composite transposon (Tn679) with the kanamycin resistance gene flanked by an intact IS679 sequence and an IS679 fragment with only IRR (IR on the right) was constructed to clarify the transposition activity of IS679. A transposition assay done with a mating system showed that Tn679 could transpose at a high frequency to the F plasmid derivative used as the target. On transposition, Tn679 duplicated an 8-bp sequence at the target site. Tn679 derivatives with a deletion in each ORF of IS679 did not transpose, finding indicative that all three IS679 ORFs are essential for transposition. The tnpA and tnpC products appear to have the amino acid sequence motif characteristic of most transposases. A homology search of the databases found that a total of 25 elements homologous to IS679 are present in Agrobacterium, Escherichia, Rhizobium, Pseudomonas, and Vibrio spp., providing evidence that the elements are widespread in gram-negative bacteria. We found that these elements belong to the IS66 family, as do other elements, including nine not previously reported. Almost all of the elements have IRs similar to those in IS679 and, like IS679, most appear to have duplicated an 8-bp sequence at the target site on transposition. These elements have three ORFs corresponding to those in IS679, but many have a mutation(s) in an ORF(s). In almost all of the elements, tnpB is located in the -1 frame relative to tnpA, such that the initiation codon of tnpB overlaps the TGA termination codon of tnpA. In contrast, tnpC, separated from tnpB by a space of ca. 20 bp, is located in any one of three frames relative to tnpB. No common structural features were found around the intergenic regions, indicating that the three ORFs are expressed by translational coupling but not by translational frameshifting.     

The IS1111 family members IS4321 and IS5075 have subterminal inverted repeats and target the terminal inverted repeats of Tn21 family transposons

IS5075 and IS4321 are closely related (93.1% identical) members of the IS1111 family that target a specific position in the 38-bp terminal inverted repeats of Tn21 family transposons and that are inserted in only one orientation. They are 1,327 bp long and have identical ends consisting of short inverted repeats of 12 bp with an additional 7 bp (TAATGAG) or 6 bp (AATGAG) to the left of the left inverted repeats and 3 bp (AGA) or 4 bp (AGAT) to the right of the right inverted repeat. Circular forms of IS5075 and IS4321 in which the inverted repeats are separated by abutting terminal sequences (AGATAATGAG) were detected. A similar circular product was found for the related ISPa11. Transposition of IS4321 into the 38-bp target site was detected, but a flanking duplication was not generated. The precisely reconstituted target site was also identified. Over 50 members of the IS1111 family were identified. They encode related transposases, have related inverted repeats, and include related bases that lie outside these inverted repeats. In some, the flanking bases number 5 or 6 on the left and 4 or 3 on the right. Specific target sites were found for several of these insertion sequence (IS) elements. IS1111 family members therefore differ from the majority of IS elements, which are characterized by terminal inverted repeats and a target site duplication, and from members of the related IS110 family, which do not have obvious inverted repeats near their termini.     

A new insertion sequence, IS231M, in an autoagglutinable isolate of Bacillus thuringiensis

An insertion sequence was isolated from an autoagglutinable strain of Bacillus thuringiensis. Analysis of its DNA sequence revealed high homology to the IS231 family. The name IS231M is proposed for this new insertion sequence. IS231M is 1652 bp long and is delimited by two imperfect 20-bp inverted repeat sequences with two mismatches, which are flanked by two perfect 11-bp direct repeats (DRs). The region upstream of the open reading frame, presumed to be able to form a stable hairpin structure, is particularly well conserved in IS231M. Based on primary nucleotide sequences, IS231M is most homologous to IS231F and IS231G and most distant from IS231V and IS231W. However, as opposed to the single transposase A ORF found in IS231A, -B, -C, -D, -F, and -G, IS231M has two overlapping open reading frames, ORF1 and ORF2, that could code for polypeptides of 334 and 143 amino acids, respectively. Whether IS231M is a functional transposable element remains to be determined.     

Isolation of a new insertion sequence, IS13655, and its application to Corynebacterium glutamicum genome mutagenesis

A new functional Corynebacterium glutamicum insertion sequence (IS) element, IS13655, was isolated using a suicide vector. The IS element was 1,293 bp in size and contained 26-bp imperfect inverted repeats (IRs) and 3-bp target site duplication as direct repeats (DRs). IS13655 harbored two ORFs with high similarity to the transposase of IS1206, an IS3 family element. IS13655 revealed relatively high transposition efficiency, with low target site selectivity along the Corynebacterium glutamicum R genome, making it a potentially useful genetic engineering tool.     

IS861, a group B streptococcal insertion sequence related to IS150 and IS3 of Escherichia coli.

A 1,442-base-pair (bp) insertion sequence (IS861) was identified in the type III group B streptococcal (GBS) strain COH-1. It is flanked by 26-bp imperfect inverted repeats and contains two open reading frames, 1 and 2, encoding 141- and 277-amino-acid proteins, respectively. A 3-bp target sequence, ACA, is duplicated and flanks each inverted repeat. IS861 shares greater than 30% homology with IS3 and IS150 of Escherichia coli, primarily in the region of their putative transposases. Northern (RNA) analysis revealed that RNA is actively transcribed in vivo by IS861 and 17- and 36-kilodalton proteins were synthesized in E. coli maxicell assays. Multiple copies of IS861 were observed throughout the chromosome of COH-1, and one of the copies is located near genes involved in GBS capsule synthesis. IS861 is the first insertion sequence identified in GBS. Its role in GBS and the significance of its relationship to the phylogenetically similar insertion sequences typified by IS150 and IS3 of E. coli are unknown.     

Unusual organization associated to a tandem of IS231 may yield two peculiar cloverleaf secondary structures.

A 5.7-kb EcoRI fragment was cloned from plasmid DNA of Bacillus thuringiensis strain M15. It contains two insertion sequences (IS), IS231M2 and -M1 in the 5'-3' order, arranged in tandem, in same orientation, separated by a 540-bp region. The primary structure is typical of a composite transposon, here of 3847 bp in length, for which the name Tn231M is proposed. Each IS is delimited by 18-bp inverted repeats (IR), and flanked by 11-bp direct repeats (DR). Both IS share 99.3% nucleotide identities. IS231M1 has a single open reading frame (ORF) which encodes a putative 477-amino-acid transposase. IS231M2 has two smaller ORFs: ORF1 and ORF2, which could code for polypeptides of 329 and 118 amino acids in length, respectively. Further analysis reveals that the regions upstream of IS231M2, and downstream of -M1, and the 540-bp region, contain additional pairs of IR and DR. Interestingly, potential annealing between all pairs of IR and DR could generate two unusual cloverleaf secondary structures.     

The novel insertion sequences IS1417, IS1418, and IS1419 from Burkholderia glumae and their strain distribution

Three insertion sequences, IS1417, IS1418, and IS1419, were isolated from Burkholderia glumae (formerly Pseudomonas glumae), a gram-negative rice pathogenic bacterium, on the basis of their abilities to activate the expression of the neo gene of the entrap vector pSHI1063. The 1335-bp IS1417 element with 17-bp imperfect terminal inverted repeats was found to be flanked by 5-bp direct repeats of the vector sequence. IS1418 is 865 bp in length and carries 15-bp inverted repeats with a target duplication of 3 bp. The 1215-bp IS1419 sequence is bounded by the 36-bp terminal inverted repeats of the element and 7-bp direct repeats of the vector sequence. IS1417 and IS1418 belong to the IS2 subgroup of the IS3 family and the IS427 subgroup of the IS5 family, respectively, whereas IS1419 does not appear to be a member of any known IS family. Southern blot analysis of DNAs from B. glumae field isolates indicated that those IS elements are widely distributed, but the host range of the three IS elements appears to be limited to B. glumae and some other related species such as B. plantarii. The polymorphisms exhibited in B. glumae isolates suggest that those elements are useful for molecular epidemiological studies of B. glumae infections.     

Transposition in Shigella dysenteriae: isolation and analysis of IS911, a new member of the IS3 group of insertion sequences.

Twenty-nine clear-plaque mutants of bacteriophage lambda were isolated from a Shigella dysenteriae lysogen. Three were associated with insertions in the cI gene: two were due to insertion of IS600, and the third resulted from insertion of a new element, IS911. IS911 is 1,250 base pairs (bp) long, carries 27-bp imperfect terminal inverted repeats, and generates 3-bp duplications of the target DNA on insertion. It was found in various copy numbers in all four species of Shigella tested and in Escherichia coli K-12 but not in E. coli W. Analysis of IS911-mediated cointegrate molecules indicated that the majority were generated without duplication of IS911. They appeared to result from direct insertion via one end of the element and the neighboring region of DNA, which resembles a terminal inverted repeat of IS911. Nucleotide sequence analysis revealed that IS911 carries two consecutive open reading frames which code for potential proteins showing similarities to those of the IS3 group of elements.     

Identification and characterization of IS1381, a new insertion sequence in Streptococcus pneumoniae.

A new insertion sequence (IS1381) was identified in the genome of Streptococcus pneumoniae R6 as an 846-bp segment containing 20-bp terminal inverted repeats and flanked by 7-bp direct repeats. The three sequenced copies of this element have two overlapping open reading frame (ORF) genes named orfA and orfB. However, significant variations between individual copies were found, suggesting that inactivating mutations have occurred in an original single ORF. Accordingly, the consensus IS1381 element derived from the comparison of the three available copies should contain a single ORF sufficient to encode a basic protein of 267 amino acids which exhibited high similarity to the putative transposases of ISL2 from Lactobacillus helveticus and of IS702 from the cyanobacterium Calothrix sp. strain PCC 7601. A minimum of five to seven copies were detected by hybridization experiments in the R6 genome. In remarkable contrast with the two previously reported pneumococcal insertion sequences, several copies of IS1381 have been detected in all of the clinical isolates tested so far. Interestingly, Streptococcus oralis NCTC 11427 (type strain), a close relative of pneumococcus, does not contain this element, but its occurrence in the type strain of Streptococcus mitis (NCTC 12261) suggests that this species has exchanged DNA with S. pneumoniae directly or through an intermediate species.     

Cloning and sequence of IS1000, a putative insertion sequence from Thermus thermophilus HB8

The complete nucleotide sequences of two copies of a putative insertion sequence IS1000 from Thermus thermophilus HB8 are presented. IS1000 is 1196 base pairs long, contains a long open reading frame which could code for a protein of 317 amino acids, and has imperfect terminal inverted repeats of 6 base pairs (confirmed by the terminal sequencing of 4.5 copies of IS1000), but does not cause a target site duplication. There are at least 6 copies of IS1000 in the genome of T. thermophilus HB8. A search of the GEN-EMBL data base revealed that the putative 317 amino acid protein had significant homology with open reading frames in the transposable elements IS110 of Streptomyces coelicolor and IS492 of Pseudomonas atlantica.     

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci.

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.     

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci.

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.     

Isolation and analysis of IS6120, a new insertion sequence from Mycobacterium smegmatis

Insertion sequence IS6120 from Mycobacterium smegmatis was identified by its ability to transpose into different sites in the lambda repressor gene, cl857, carried on an Escherichia coli/mycobacteria shuttle plasmid. IS6120 is a novel 1.5 kb insertion sequence, which has 24-bp imperfect terminal inverted repeats and generates 9-bp duplications of the target DNA following insertion. IS6120 is present in at least three copies in M. smegmatis but was not found in other species, including Mycobacterium tuberculosis. Nucleotide sequence analysis revealed that IS6120 contains two open reading frames, one of which encodes a putative transposase with similarities to those found in IS256 from Staphylococcus aureus, IST2 from Thiobacillus ferrooxidans, and ISRm3 from Rhizobium meliloti. The fact that IS6120 does not recognize a consensus target sequence for insertion and has no homologous sequences in the other strains studied makes IS6120 useful for transposon mutagenesis in mycobacteria.     

Detection of Xanthomonas oryzae pv. oryzae in artificially inoculated and naturally infected rice seeds and plants by molecular techniques

A polymerase chain reaction (PCR) technique was developed for detecting the presence of Xanthomonas oryzae pv. oryzae, the bacterial leaf blight (BLB) pathogen in rice seed and for studying the transmission of this bacterium from seed to plant. Primers TXT and TXT4R from an insertion sequence (IS1113) of the pathogen were used to amplify a 964-bp DNA fragment. A combined biological and enzymatic amplification (BIO-PCR) technique was used to detect the pathogen in naturally infected seed. The level of detection of TXT and TXT4R primers was 55 fg DNA of X. o. pv. oryzae, which is roughly the equivalent of seven cells (and four cells in pure culture suspension) of X. o. pv. oryzae. Hybridization of IS1113 with the amplified DNA fragment in Southern blot analysis confirmed that the 964-bp DNA fragment was amplified from X. o. pv. oryzae. The presence of the IS1113 element in strains of X. o. pv. oryzae from 16 rice-growing countries was confirmed by DNA dot blot analysis. X. o. pv. oryzae was detected from the seed washes and DNA extracted from the seed washes of naturally infected seeds of cvs Jaya and TN1. When stored at 4 degrees C, the pathogen was recovered up to 4 months and 9 months from naturally infected seeds of cvs Jaya and TN1, respectively. The BLB bacterium was also detected in seedlings, mature plants and seeds collected from plants raised from naturally infected seeds.     

Structural and genetic organization of IS232, a new insertion sequence of Bacillus thuringiensis.

In the Bacillus thuringiensis strains toxic for the lepidopteran larvae, the delta-endotoxin genes cryIA are frequently found within a composite transposonlike structure flanked by two inverted repeat sequences. We report that these elements are true insertion sequences and designate them IS232. IS232 is a 2,184-bp element and is delimited by two imperfect inverted repeats (28 of 37 bp are identical). Two adjacent open reading frames, overlapping for three codons, span almost the entire sequence of IS232. The potential encoded polypeptides of 50 and 30-kDa are homologous to the IstA and IstB proteins of the gram-negative insertion sequence IS21. The N-terminal part of the 50-kDa polypeptide contains a helix-turn-helix DNA-binding motif. The junctions at the insertion sites of three IS232 elements were analyzed. Each case was different, with 0, 4, or 6 bp of the target DNA being duplicated. Transposition of IS232 in Escherichia coli was demonstrated by using a genetic marker inserted upstream of the two open reading frames.