Identification and Characterization of Lipolytic Enzymes from a Peat-Swamp Forest Soil Metagenome

In this work, a metagenomic library was generated from peat-swamp forest soil obtained from Narathiwat Province, Thailand. From a fosmid library of approximately 15,000 clones, six independent clones were found to possess lipolytic activity at acidic pH. Analysis of pyrosequencing data revealed six ORFs, which exhibited 34–71% protein similarity to known lipases/esterases. A fosmid clone, designated LP8, which demonstrated the highest level of lipolytic activity under acidic conditions and demonstrated extracellular activity, was subsequently subcloned and sequenced. The full-length lipase/esterase gene, estPS2, was identified. Its deduced amino acid was closely related to a lipolytic enzyme of an uncultured bacterium, and contained the highly conserved motif of a hormone-sensitive family IV lipase. The EstPS2 enzyme exhibited highest activity toward p-nitrophenyl butyrate (C₄) at 37 °C at pH 5, indicating that it was an esterase with activity and secretion characteristics suitable for commercial development.     

Isolation of a low-temperature adapted lipolytic enzyme from uncultivated micro-organism

Aims: The aim of the study was to isolate a novel lipolytic enzyme from the activated sludge of uncultured micro‐organisms. Methods and Results: The metagenomic DNA was directly extracted from the activated sludge, and a metagenomic library was constructed by using the pUC vector. The library was screened for lipolytic enzyme activity on 1% tributyrin agar plate. A clone among c. 100 000 recombinant libraries showed the lipolytic activity. The putative lipolytic gene encoding lipo1 from the metagenomic library was subcloned and expressed in Escherichia coli BL21 using the pET expression system. The expressed recombinant enzyme was purified by Ni‐nitrilotriacetic acid affinity chromatography and characterized using general substrates of lipolytic property. The gene consisted of 972 bp encoding a polypeptide of 324 amino acids with a molecular mass of 35·6 kDa. Typical residues essential for lipolytic activity such as penta‐peptide (GXSXG) and catalytic triad sequences (Ser166, Asp221 and His258) were detected. The deduced amino acid sequence of lipo1 showed low identity with amino acid sequences of esterase/lipase (32%, ZP_01528487 ) from Pseudomonas mendocina ymp and esterase (31%, AAY45707 ) from uncultured bacterium. This lipolytic enzyme exhibited the highest activity at pH 7·5 and 10°C. At thermal stability analysis, lipo1 was more unstable at 40°C than 10°C. Conclusions: An activity based strategy has been an effective method for fishing out a low‐temperature adapted lipolytic enzyme from the metagenomic library. This lipo1 enzyme can be considered to belong to the hormone‐sensitive lipase family due to the enzyme’s oxyanion hole by the sequence HGGG. Significance and Impact of the Study: Lipo1 is a novel psychrophilic esterase obtained directly from the metagenomic library. Owing its support of significant activity at low temperature, this enzyme is expected to be useful for potential application as a biocatalyst in organic chemistry.     

Identification and characterization of novel esterases from a deep-sea sediment metagenome

A deep-sea sediment metagenomic library was constructed and screened for lipolytic enzymes by activity-based approach. Nine novel lipolytic enzymes were identified, and the amino acid sequences shared 56% to 84% identity to other lipolytic enzymes in the database. Phylogenetic analysis showed that these enzymes belonged to family IV lipolytic enzymes. One of the lipolytic enzymes, Est6, was successfully cloned and expressed in Escherichia coli Rosetta in a soluble form. The recombinant protein was purified by Ni-nitrilotriacetic affinity chromatography column and characterized using p-nitrophenyl esters with various chain lengths. The est6 gene consisted of 909 bp that encoded 302 amino acid residues. Est6 was most similar to a lipolytic enzyme from uncultured bacterium (ACL67845, 61% identity) isolated from the South China Sea marine sediment metagenome. The characterization of Est6 revealed that it was a cold-active esterase and exhibited the highest activity toward p-nitrophenyl butyrate (C4) at 20°C and pH 7.5.     

A novel β-glucosidase with lipolytic activity from a soil metagenome

Moonlighting proteins have two different functions within a single polypeptide chain. Exploring moonlighting enzymes from the environment using the metagenomic approach is interesting. In the present study, a novel β-glucosidase gene, designated as bgl1D, with lipolytic activity (renamed Lip1C) was cloned through function-based screening of a metagenomic library from uncultured soil microorganisms. The deduced amino acid sequence comparison and phylogenetic analysis also indicated that Lip1C and other putative lipases are closely related. Biochemical characterization demonstrated that the maximum activity of the recombinant Lip1C protein occurs at pH 8.0 and 30°C using 4-nitrophenyl butyrate as substrate. The putative lipase had an apparent K _m value of 0.88 mmol/L, a k _cat value of 212/min, and a k _cat/K _m value of 241 L/mmol/min. Lip1C exhibited habitat-specific characteristics with 5 mmol/L AlCl₃, CuCl₂, and LiCl. The characterization of the biochemical properties of Lip1C enhances our understanding of this novel moonlighting enzyme isolated from a soil metagenome.     

Identification and characterization of a novel cold-adapted esterase from a metagenomic library of mountain soil

A novel lipolytic enzyme was isolated from a metagenomic library after demonstration of lipolytic activity on an LB agar plate containing 1% (w/v) tributyrin. A novel esterase gene (estIM1), encoding a lipolytic enzyme (EstIM1), was cloned using a shotgun method from a pFosEstIM1 clone of the metagenomic library, and the enzyme was characterized. The estIM1 gene had an open reading frame (ORF) of 936 base pairs and encoded a protein of 311 amino acids with a molecular mass 34 kDa and a pI value of 4.32. The deduced amino acid sequence was 62% identical to that of an esterase from an uncultured bacterium (ABQ11271). The amino acid sequence indicated that EstIM1 was a member of the family IV of lipolytic enzymes, all of which contain a GDSAG motif shared with similar enzymes of lactic acid microorganisms. EstIM1 was active over a temperature range of 1–50°C, at alkaline pH. The activation energy for hydrolysis of p-nitrophenyl propionate was 1.04 kcal/mol, within a temperature range of 1–40°C. The activity of EstIM1 was about 60% of maximal even at 1°C, suggesting that EstIM1 is efficiently cold-adapted. Further characterization of this cold-adapted enzyme indicated that the esterase may be very valuable in industrial applications.     

Screening for novel lipolytic enzymes from uncultured soil microorganisms

The construction and screening of metagenomic libraries constitute a valuable resource for obtaining novel biocatalysts. In this work, we present the construction of a metagenomic library in Escherichia coli using fosmid and microbial DNA directly isolated from forest topsoil and screened for lipolytic enzymes. The library consisted of 33,700 clones with an average DNA insert size of 35 kb. Eight unique lipolytic active clones were obtained from the metagenomic library on the basis of tributyrin hydrolysis. Subsequently, secondary libraries in a high-copy-number plasmid were generated to select lipolytic subclones and to characterize the individual genes responsible for the lipolytic activity. DNA sequence analysis of six genes revealed that the enzymes encoded by the metagenomic genes for lipolytic activity were novel with 34–48% similarity to known enzymes. They had conserved sequences similar to those in the hormone-sensitive lipase family. Based on their deduced amino acid similarity, the six genes encoding lipolytic enzymes were further divided into three subgroups, the identities among which ranged from 33% to 45%. The six predicted gene products were successfully expressed in E. coli and secreted into the culture broth. Most of the secreted enzymes showed a catalytic activity for hydrolysis of p-nitrophenyl butyrate (C₄) but not p-nitrophenyl palmitate (C₁₆).     

Identification of a new subfamily of salt-tolerant esterases from a metagenomic library of tidal flat sediment

To search for novel lipolytic enzymes, a metagenomic library was constructed from the tidal flat sediment of Ganghwa Island in South Korea. By functional screening using tributyrin agar plates, 3 clones were selected from among the 80,050 clones of the fosmid library. The sequence analysis revealed that those clones contained different open reading frames, which showed 50–57% amino acid identity with putative lipolytic enzymes in the database. Based on the phylogenetic analysis, they were identified to encode novel members, which form a distinct and new subfamily in the family IV of bacterial lipolytic enzymes. The consensus sequence, GT(S)SA(G)G, encompassing the active site serine of the enzymes was different from the GDSAG motif, conserved in the other subfamily. The genes were expressed in Escherichia coli and recombinant proteins were purified as active soluble forms. The enzymes showed the highest activity toward p-nitrophenyl valerate (C5) and exhibited optimum activities at mesophilic temperature ranges and slightly alkaline pH. In particular, the enzymes displayed salt tolerance with over 50% of the maximum activity remained in the presence of 3 M NaCl (or KCl). In this study, we demonstrated that the metagenomic approach using marine tidal flat sediment as a DNA source expanded the diversity of lipolytic enzyme-encoding genes.     

Cloning and characterization of a new cold-active lipase from a deep-sea sediment metagenome

To search for new cold-active lipases, a metagenomic library was constructed using cold-sea sediment samples at Edison Seamount and was screened for lipolytic activities by plating on a tricaprylin medium. Subsequently, a fosmid clone was selected, and the whole sequence of 36 kb insert of the fosmid clone was determined by shotgun sequencing. The sequence analysis revealed the presence of 25 open reading frames (ORF), and ORF20 (EML1) showed similarities to lipases. Phylogenetic analysis of EML1 suggested that the protein belonged to a new family of esterase/lipase together with LipG. The EML1 gene was expressed in Escherichia coli, and purified by metal-chelating chromatography. The optimum activity of the purified EML1 (rEML1) occurred at pH 8.0 and 25°C, respectively, and rEML1 displayed more than 50% activity at 5°C. The activation energy for the hydrolysis of olive oil was determined to be 3.28 kcal/mol, indicating that EML1 is a cold-active lipase. rEML1 preferentially hydrolyzed triacylglycerols acyl-group chains with long chain lengths of ≥8 carbon atoms and displayed hydrolyzing activities toward various natural oil substrates. rEML1 was resistant to various detergents such as Triton X-100 and Tween 80. This study represents an example which developed a new cold-active lipase from a deep-sea sediment metagenome.     

Structural and functional characterization of a novel lipolytic enzyme from a Brazilian Cerrado soil metagenomic library

Objective

To isolate putative lipase enzymes by screening a Cerrado soil metagenomic library with novel features.

Results

Of 6720 clones evaluated, Clone W (10,000 bp) presented lipolytic activity and four predicted coding sequences, one of them LipW. Characterization of a predicted esterase/lipase, LipW, showed 28% sequence identity with an arylesterase from Pseudomonas fluorescens (pdb|3HEA) from protein database (PDB). Phylogenetic analysis showed LipW clustered with family V lipases; however, LipW was clustered in different subclade belonged to family V, suggesting a different subgroup of family V. In addition, LipW presented a difference in family V GH motif, a glycine replaced by a serine in GH motif. Estimated molecular weight and stokes radius values of LipW were 29,338.67–29,411.98 Da and 2.58–2.83 nm, respectively. Optimal enzyme activity was observed at pH 9.0–9.5 and at 40 °C. Circular dichroism analysis estimated secondary structures percentages as approximately 45% α-helix and 15% β-sheet, consistent with the 3D structure predicted by homology.

Conclusion

Our results demonstrate the isolation of novel family V lipolytic enzyme with biotechnological applications from a metagenomic library.

     

Molecular cloning and characterization of a new cold-active esterase from a deep-sea metagenomic library

A clone which conferred lipolytic activity at low temperature was identified from a fosmid library constructed from a South China Sea marine sediment sample. The gene responsible, estF, consisted of 1,080 bp that encoded 359 amino acid residues, with a typical N-terminal signal peptide of 28 amino acid residues. A phylogenetic analysis of amino acid sequence with other lipolytic enzymes revealed that EstF and seven closely related putative lipolytic enzymes comprised a unique clade in the phylogenetic tree. Moreover, these hypothetic esterases showed unique conservative sites in the amino acid sequence. The recombinant EstF was overexpressed and purified, and its biochemical properties were partially characterized. The optimal substrate for EstF to hydrolyze among a panel of p-nitrophenyl esters (C2 to C16) was p-nitrophenyl butyrate (C4), with a K _m of 0.46 mM. Activity quickly decreased with substrates containing an acyl chain length longer than 10 carbons. We found that EstF was active in the temperature range of 0–60°C, showed the best activity at 50°C, but was unstable at 60°C. It exhibited a high level of activity in the pH range of 7.0–10.0 showing the highest activity at pH 9.0.     

Expression and characterization of a novel heterologous moderately thermostable lipase derived from metagenomics in <Emphasis Type="Italic">Streptomyces lividans</Emphasis>

Seven lipolytic genes were isolated and sequenced from a metagenomic library that was constructed following biomass enrichment in a fed-batch bioreactor submitted to high temperature (50–70°C) and alkaline pH (7–8.5). Among those sequences, lipIAF1-6 was chosen for further study and cloned in Streptomyces lividans 10–164. The G+C content within the sequence was 64.3%. The encoded protein, LipIAF1-6, was related to various putative lipases previously identified in different genome sequences. Homology of LipIAF-6 with the different lipases did not exceed 31%. The optimum pH (8.5) and temperature (60°C) of the purified enzyme were in agreement with the enrichment conditions. Furthermore, the enzyme was thermostable for as long as 30 min at 70°C. The maximum activity of the purified lipase was 4,287 IU/mg towards p-nitrophenyl (p-NP) butyrate (60°C; pH 8.5). LipIAF1-6 does not seem to need the presence of metal ions for its activity. The enzyme was slightly inhibited by 10 mM CoCl₂ (14%), HgCl₂ (12%), and dithiothreitol (DTT) (15%). The serine protease inhibitor phenylmethylsulphonyl fluoride (PMSF) reduced activity by 39% and 71% when incubated at concentrations of 1 and 10 mM, respectively. Finally, LipIAF1-6 was stable in different organic solvents, and against several surfactants and oxidative agents commonly found in detergent formulations. These results are quite encouraging for further use of this enzyme in different industrial processes.     

Metagenomic approach for the isolation of a novel low-temperature-active lipase from uncultured bacteria of marine sediment

A novel lipase was isolated from a metagenomic library of Baltic Sea sediment bacteria. Prokaryotic DNA was extracted and cloned into a copy control fosmid vector (pCC1FOS) generating a library of >7000 clones with inserts of 24-39 kb. Screening for clones expressing lipolytic activity based on the hydrolysis of tributyrin and p-nitrophenyl esters, identified 1% of the fosmids as positive. An insert of 29 kb was fragmented and subcloned. Subclones with lipolytic activity were sequenced and an open reading frame of 978 bp encoding a 35.4-kDa putative lipase/esterase h1Lip1 (DQ118648) with 54% amino acid similarity to a Pseudomonas putida esterase (BAD07370) was identified. Conserved regions, including the putative active site, GDSAG, a catalytic triad (Ser148, Glu242 and His272) and a HGG motif, were identified. The h1Lip1 lipase was over expressed, (pGEX-6P-3 vector), purified and shown to hydrolyse p-nitrophenyl esters of fatty acids with chain lengths up to C14. Hydrolysis of the triglyceride derivative 1,2-di-O-lauryl-rac-glycero-3-glutaric acid 6'-methylresorufin ester (DGGR) confirmed that h1Lip1 was a lipase. The apparent optimal temperature for h1Lip1, by hydrolysis of p-nitrophenyl butyrate, was 35 degrees C. Thermal stability analysis showed that h1Lip1 was unstable at 25 degrees C and inactivated at 40 degrees C with t1/2 <5 min.     

Characterization of a thermoactive endoglucanase isolated from a biogas plant metagenome

A metagenomic library from DNA isolated from a biogas plant was constructed and screened for thermoactive endoglucanases to gain insight into the enzymatic diversity involved in plant biomass breakdown at elevated temperatures. Two cellulase-encoding genes were identified and the corresponding proteins showed sequence similarities of 59% for Cel5A to a putative cellulase from Anaerolinea thermolimosa and 99% for Cel5B to a characterized endoglucanase isolated from a biogas plant reactor. The cellulase Cel5A consists of one catalytical domain showing sequence similarities to glycoside hydrolase family 5 and comprises 358 amino acids with a predicted molecular mass of 41.2 kDa. The gene coding for cel5A was successfully cloned and expressed in Escherichia coli C43(DE3). The recombinant protein was purified to homogeneity using affinity chromatography with a specific activity of 182 U/mg, and a yield of 74%. Enzymatic activity was detectable towards cellulose and mannan containing substrates and over a broad temperature range from 40 °C to 70 °C and a pH range from 4.0 to 7.0 with maximal activity at 55 °C and pH 5.0. Cel5A showed high thermostability at 60 °C without loss of activity after 24 h. Due to the enzymatic characteristics, Cel5A is an attractive candidate for the degradation of lignocellulosic material.

     

Isolation and characterization of a novel organic solvent-tolerant and halotolerant esterase from a soil metagenomic library

Soil metagenome conceals a great variety of unexploited genes for industrially important enzymes. To identify novel genes conferring lipolytic activity, one metagenomic library comprising of 200,000 transformants were constructed. Among the 48,000 clones screened, 19 clones which exhibited lipolytic activity were obtained. After sequence analysis, 19 different lipolytic genes were identified. One of these genes, designated as estWSD, consisted of 1152 nucleotides, encoding a 383-amino-acid protein. Multiple sequence alignment and phylogenetic analysis indicated that EstWSD and its closest homologues may constitute a new family of bacterial lipolytic enzymes. The best substrate for the purified EstWSD among the ρ-nitrophenol esters examined was ρ-nitrophenol butyrate. Recombinant EstWSD displayed a pH optimum of 7.0 and a temperature optimum of 50 °С. This enzyme retained 52% of maximal activity after incubation at 50 °C for 3 h. Furthermore, EstWSD also exhibited salt tolerance with over 51% of its initial activity in the presence of up to 4.5 M NaCl for 1 h. In particular, this enzyme showed remarkable stability in 15% and 30% dimethylsulfoxide, ρ-xylene, hexane, heptane, and octane even after incubation for 72 h. To our knowledge, it is the first report to find a novel esterase belonging to a new lipolytic family and possessing such variety of excellent features. All these characteristics suggest that EstWSD may be a potential candidate for application in industrial processes.     

A new alkaline lipase obtained from the metagenome of marine sponge <Emphasis Type="Italic">Ircinia</Emphasis> sp.

Microorganisms associated with marine sponges are potential resources for marine enzymes. In this study, culture-independent metagenomic approach was used to isolate lipases from the complex microbiome of the sponge Ircinia sp. obtained from the South China Sea. A metagenomic library was constructed, containing 6568 clones, and functional screening on 1 % tributyrin agar resulted in the identification of a positive lipase clone (35F4). Following sequence analysis 35F4 clone was found to contain a putative lipase gene lipA. Sequence analysis of the predicted amino acid sequence of LipA revealed that it is a member of subfamily I.1 of lipases, with 63 % amino acid similarity to the lactonizing lipase from Aeromonas veronii (WP_021231793). Based on the predicted secondary structure, LipA was predicted to be an alkaline enzyme by sequence/structure analysis. Heterologous expression of lipA in E. coli BL21 (DE3) was performed and the characterization of the recombinant enzyme LipA showed that it is an alkaline enzyme with high tolerance to organic solvents. The isolated lipase LipA was active in the broad alkaline range, with the highest activity at pH 9.0, and had a high level of stability over a pH range of 7.0–12.0. The activity of LipA was increased in the presence of 5 mM Ca²⁺ and some organic solvents, e.g. methanol, acetone and isopropanol. The optimum temperature for the activity of LipA is 40 °C and the molecular weight of LipA was determined to be ~30 kDa by SDS-PAGE. LipA is an alkaline lipase and shows good tolerance to some organic solvents, which make it of potential utility in the detergent industry and enzyme mediated organic synthesis. The result of this study has broadened the diversity of known lipolytic genes and demonstrated that marine sponges are an important source for new enzymes.     

Gene cloning,expression and characterization of a cold-adapted lipase from a psychrophilic deep-sea bacterium Psychrobacter sp. C18

A psychrophilic bacterium Psychrobacter sp. C18 previously isolated from the Southern Okinawa Trough deep-sea sediments showed extracellular lipolytic activity towards tributyrin. A genomic DNA library was constructed and screened to obtain the corresponding lipase gene. The sequenced DNA fragment contains an open reading frame of 945 bp, which was denoted as the lipX gene, from which a protein sequence LipX was deduced of 315 amino acid residues with a molecular mass of 35,028 Da. This protein contained the bacterial lipase GNSMG (GxSxG, x represents any amino acid residue) and HG consensus motifs. The recombinant pET28a(+)/lipX gene was overexpressed in heterologous host Escherichia coli BL21 (DE3) cells to overproduce the lipase protein LipX_His with a 6× histidine tag at its C-terminus. Nickel affinity chromatography was used for purification of the expressed recombinant lipase. The maximum lipolytic activity of the purified recombinant lipase was obtained at temperature of 30°C and pH 8.0 with p-nitrophenyl myristate (C14) as a substrate. Thermostability assay indicated that the recombinant LipX_His is a cold-adapted lipase, which was active in 10% methanol, ethanol, acetone and 30% glycol, and inhibited partially by Zn²⁺, Co²⁺, Mn²⁺, Fe³⁺ and EDTA. Most non-ionic detergents, such as DMSO, Triton X-100, Tween 60 and Tween 80 enhanced the lipase activity but 1% SDS completely inhibited the enzyme activity. Additionally, the highest lipolytic rate of the recombinant LipX_His lipase was achieved when p-nitrophenyl myristate was used as a substrate, among all the p-nitrophenyl esters tested.     

Characterization of two soil metagenome-derived lipases with high specificity for <Emphasis Type="Italic">p</Emphasis>-nitrophenyl palmitate

Two novel genes (pwtsB and pwtsC) encoding lipases were isolated by screening the soil metagenomic library. Sequence analysis revealed that pwtsB encodes a protein of 301 amino acids with a predicted molecular weight of 33 kDa, and pwtsC encodes a protein of 323 amino acids with a predicted molecular weight of 35 kDa. Furthermore, both genes were cloned and expressed in Escherichia coli BL21 (DE3) using pET expression system. The expressed recombinant enzymes were purified by Ni-nitrilotriacetic acid affinity chromatography and characterized by spectrophotometric with different p-nitrophenyl esters. The results showed that PWTSB displayed a high degree of activity and stability at 20°C with an optimal pH of around 8.0, and PWTSC at 40°C with an optimal pH of around 7.0. P-nitrophenyl palmitate (p-NPP) was identified as the best substrate of PWTSB and PWTSC. The specific activities of PWTSB and PWTSC were 150 and 166 U/mg, respectively toward p-NPP at 30°C, about 20-fold higher than that toward p-nitrophenyl butyrate (C4) and caprylate (C8). In conclusion, our results suggest that PWTSB is a cold adapt lipase and PWTSC is a thermostable lipase to long-chain p-nitrophenyl esters. P. Wei and L. Bai contributed equally to this work.     

Molecular cloning and characterization of amylase from soil metagenomic library derived from Northwestern Himalayas

The increasing demand for novel biocatalysts stimulates exploration of resources from soil. Metagenomics, a culture independent approach, represent a sheer unlimited resource for discovery of novel biocatalysts from uncultured microorganisms. In this study, a soil-derived metagenomic library containing 90,700 recombinants was constructed and screened for lipase, cellulase, protease and amylase activity. A gene (pAMY) of 909 bp encoding for amylase was found after the screening of 35,000 Escherichia coli clones. Amino acid sequence comparison and phylogenetic analysis indicated that pAMY was closely related to uncultured bacteria. The molecular mass of pAMY was estimated about 38 kDa by sodium dodecyl sulphate polyacrylamide gel electrophoresis. Amylase activity was determined using soluble starch, amylose, glycogen and maltose as substrates. The maximal activity (2.46 U/mg) was observed at 40 °C under nearly neutral pH conditions with amylose; whereas it retains 90% of its activity at low temperature with all the substrates used in this study. The ability of pAMY to work at low temperature is unique for amylases reported so far from microbes of cultured and uncultured division.