Identification of myosin in Nitella flexilis.

A myosin B-like protein was extracted from the alga Nitella flexilis. SDS-polyacrylamide gel electrophoresis revealed the presence of myosin heavy chain and actin as the main components. At high ionic strength, its ATPase [EC 3.6.1.3] reaction was activated by EDTA or Ca2+ and inhibited by Mg2+. At low ionic strength, superprecipitation was induced by the addition of ATP. Myosin was purified from Nitella myosin B. The molecular weight of the heavy chain of Nitella myosin, estimated by SDS-gel electrophoresis, was slightly higher than that of skeletal muscle myosin. At low ionic strength, Nitella myosin aggregated to form bipolar filaments about 0.2 micron long. At high ionic strength, its ATPase reaction was activated by EDTA or Ca2+, and inhibited by Mg2+. The Mg2+-ATPase reaction of Nitella myosin was activated by skeletal muscle F-actin.     

Human platelet myosin. II. In vitro assembly and structure of myosin filaments

We have used electron microscopy and solubility measurements to investigate the assembly and structure of purified human platelet myosin and myosin rod into filaments. In buffers with ionic strengths of less than 0.3 M, platelet myosin forms filaments which are remarkable for their small size, being only 320 nm long and 10-11 nm wide in the center of the bare zone. The dimensions of these filaments are not affected greatly by variation of the pH between 7 and 8, variation of the ionic strength between 0.05 and 0.2 M, the presence or absence of 1 mM Mg++ or ATP, or variation of the myosin concentration between 0.05 and 0.7 mg/ml. In 1 mM Ca++ and at pH 6.5 the filaments grow slightly larger. More than 90% of purified platelet myosin molecules assemble into filaments in 0.1 M KC1 at pH 7. Purified preparations of the tail fragment of platelet myosin also form filaments. These filaments are slightly larger than myosin filaments formed under the same conditions, indicating that the size of the myosin filaments may be influenced by some interaction between the head and tail portions of myosin molecules. Calculations based on the size and shape of the myosin filaments, the dimensions of the myosin molecule and analysis of the bare zone reveal that the synthetic platelet myosin filaments consists of 28 myosin molecules arranged in a bipolar array with the heads of two myosin molecules projecting from the backbone of the filament at 14-15 nm intervals. The heads appear to be loosely attached to the backbone by a flexible portion of the myosin tail. Given the concentration of myosin in platelets and the number of myosin molecules per filament, very few of these thin myosin filaments should be present in a thin section of a platelet, even if all of the myosin molecules are aggregated into filaments.     

Caldesmon inhibits skeletal actomyosin subfragment-1 ATPase activity and the binding of myosin subfragment-1 to actin

Smooth muscle contraction is controlled in part by the state of phosphorylation of myosin. A recently discovered actin and calmodulin-binding protein, named caldesmon, may also be involved in regulation of smooth muscle contraction. Caldesmon cross-links actin filaments and also inhibits actin-activated ATP hydrolysis by myosin, particularly in the presence of tropomyosin. We have studied the effect of caldesmon on the rate of hydrolysis of ATP by skeletal muscle myosin subfragment-1, a system in which phosphorylation of the myosin is not important in regulation. Caldesmon is a very effective inhibitor of ATP hydrolysis giving up to 95% inhibition. At low ionic strength (approximately 20 mM) this effect does not require smooth muscle tropomyosin, whereas at high ionic strength (approximately 120 mM) tropomyosin enhances the inhibitory activity of caldesmon at low caldesmon concentrations. Cross-linking of actin is not essential for inhibition of ATP hydrolysis to occur since at high ionic strength there is very little cross-linking as determined by a low speed sedimentation assay. Under all conditions examined, the decrease in the rate of ATP hydrolysis is accompanied by a decrease in the binding of myosin subfragment-1 to actin. Furthermore, caldesmon weakens the equilibrium binding of myosin subfragment-1 to actin in the presence of pyrophosphate. We conclude that caldesmon has a general weakening effect on the binding of skeletal muscle myosin subfragment-1 to actin and that this weakening in binding may be responsible for inhibition of ATP hydrolysis.     

Properties of porcine platelet myosin. I. Similarity between vertebrate smooth muscle and nonmuscle myosins in their binding properties with F-actin

The mechanism of the ATPase [EC 3.6.1.3] reaction of porcine platelet myosin and the binding properties of platelet myosin with rabbit skeletal muscle F-actin were investigated. The kinetic properties of the platelet myosin ATPase reaction, that is, the rate, the extent of fluorescence enhancement of myosin, the size of the initial P1 burst of myosin, and the amount of nucleotides bound to myosin during the ATPase reaction, were very similar to those found for other myosins. Strong binding of platelet myosin with rabbit skeletal muscle F-actin, as found for smooth muscle myosin, was suggested by the following results. The rate of the ATP-induced dissociation of hybrid actomyosin, reconstituted from platelet myosin and skeletal muscle F-actin, was very slow. The amount of ATP necessary for complete dissociation of hybrid actomyosin was 2 mol/mol of myosin, although skeletal muscle actomyosin is known to dissociate completely upon addition of 1 mol ATP per mol of myosin. Unlike skeletal muscle myosin, the EDTA(K+)-ATPase activity of platelet myosin was inhibited by skeletal muscle F-actin. These observations indicate that ATP hydrolysis by vertebrate nonmuscle myosin follows the same mechanism as with other myosins and that the binding properties of nonmuscle myosin with F-actin are similar to those of smooth muscle myosin but not to those of skeletal muscle myosin.     

Comparison of kinetic properties of the ATPase reaction of arterial smooth muscle myosin with skeletal muscle myosin

Myosin was prepared from arterial smooth muscle, and a hybrid actomyosin was formed from arterial myosin and rabbit skeletal muscle F-actin. We performed kinetics on the ATPase reaction [EC 3.6.1.3] of arterial myosin and the hybrid actomyosin at high ionic strength, and compared the kinetic properties of arterial myosin ATPase with those of skeletal muscle myosin ATPase. No significant difference was found between these two myosins in the size of the initial Pi burst, the amount of bound nucleotides, and the rates of various elementary steps in the ATPase reaction. On the other hand, two important differences were observed between the hybrid actomyosin and skeletal muscle actomyosin: (i) The amounts of ATP necessary for complete dissociation of the hybrid and skeletal muscle actomyosins were 2 and 1 mol/mol of myosin, respectively. (ii) The rate of dissociation of the hybrid actomyosin induced by ATP was much lower than that of skeletal muscle actomyosin and also was lower than that of fluorescence enhancement.     

Comparative studies on the structure and aggregative properties of the myosin molecule. III. The in vitro aggregative properties of the lobster myosin molecule.

The solubility of rabbit skeletal and lobster abdominal muscle myosin has been studied in monovalent salt solutions as a function of pH (over the range 4.75 to 8.5) and ionic strength (50-500 mM). Rabbit skeletal muscle myosin was found to precipitate over a narrower pH range than the lobster abdominal muscle myosin but at equivalent pH values and ionic strengths the former exhibited greater solubility. Comparison of the solubility of rabbit myosin, per se with that of light meromyosin and lobster myosin with its equivalent proteolytically produced fragment (fraction B1) showed that both rod fragments were more soluble than their parent molecules. Under conditions of low solubility (low ionic strength and pH) the quantitiy of protein in solution remained essentially constant with increasing total protein, thus suggesting that the aggregation phenomenon is of a phase transition type. Examination of the aggregates by electron microscopy revealed that rabbit myosin formed classical, elongate, spindle-shaped filaments similar to those previously observed by others. In contrast lobster myosin only formed short, dumbbell-shaped filaments 0.2-0.3 mum long. Consideration of the pH ranges over which aggregation occurred suggests that protonation of histidine residues may be involved in rabbit myosin filament formation while for lobster myosin, aggregation may involve protonation of epsilon-amino or guanidino groups. The possible relationship between the distribution of these groups along the rod portion of the myosin molecule and the formation of elongate filaments has been explored.     

Movement of actin away from the center of reconstituted rabbit myosin filament is slower than in the opposite direction.

By decreasing ionic strength slowly, thick filaments of several micrometers in length were obtained from purified rabbit skeletal muscle myosin. Dark-field observation showed these filaments with their center scattering light extensively. Active movement of actin filaments complexed with tetramethyl rhodamine-phalloidin along the reconstituted myosin filaments was observed. Actin filaments moved towards the center of myosin filaments at a speed of 3.9 +/- 1.6 microns s-1 (mean +/- SD, n = 40) and often continued to move beyond the center towards the tip of the opposite side at a lower speed. The speed of the movement away from the center was 1.0 +/- 0.6 microns s-1 (n = 59). Thus, the functional bipolarity in terms of the movement speed which was first found in native thick filaments of molluscan smooth muscle is also seen in reconstituted filaments from purified rabbit skeletal muscle myosin. The difference of the speed between the two directions is considered to be due to properties of myosin molecules themselves.     

Purification and characterization of myosin from the clonal rat glial cell strain C-6.

A myosin was isolated from the clonal rat glial cell strain C-6 and compared with rat skeletal muscle myosin. After cell extracts were subjected to gel filtration chromatography in the presence of KI and magnesium pyrophosphate the C-6 myosin was rapidly purified by a procedure similar to that used for skeletal muscle myosin. The C-6 myosin resembles muscle myosin both physically and enzymatically. It contains heavy chains of 200,000 daltons and two classes of light chains of 17,000 and 19,000 daltons in approximately equal molar ratios. This myosin forms bipolar thick filaments in 0.1 M KCl and binds reversibly to skeletal muscle F-actin, the binding being inhibited by MgATP. Skeletal muscle F-actin stimulates the C-6 myosin adenosine triphosphatase 2- to 3-fold in the presence of KCl and Mg2+. The action activation of muscle myosin ATPase at low ionic strength is 10-fold greater than that of C-6 myosin. Ca2+ and EDTA stimulated the ATPase activities of both enzymes. When assayed in the presence of 0.6 M KCl and 1 mM EDTA the skeletal muscle myocin ATPase demonstrates substrate saturation while the C-6 myosin enzyme activity is stimulated by ATP concentrations above 2.5 mM.     

Actin and Myosin in pea tendrils

We demonstrate here the presence of actin and myosin in pea (Pisum sativum L.) tendrils. The molecular weight of tendril actin is 43,000, the same as rabbit skeletal muscle actin. The native molecular weight of tendril myosin is about 440,000. Tendril myosin is composed of two heavy chains of molecular weight approximately 165,000 and four (two pairs) light chains of 17,000 and 15,000. At high ionic strength, the ATPase activity of pea tendril myosin is activated by K⁺-EDTA and Ca²⁺ and is inhibited by Mg²⁺. At low ionic strength, the Mg²⁺-ATPase activity of pea tendril myosin is activated by rabbit skeletal muscle F-actin. Superprecipitation occurred after incubation at room temperature when ATP was added to the crude actomyosin extract. It is suggested that the interaction of actin and myosin may play a role in the coiling movement of pea tendril.     

Myosin from human erythrocytes

We have purified myosin from human erythrocytes using methods similar to that for other cytoplasmic myosins with a yield of about 500 micrograms/100 ml of packed cells. It consists of a 200-kDa heavy chain and light chains of 26- and 19.5 kDa and therefore differs from the isozyme in platelets which has light chains of 20- and 15 kDa. At low ionic strength, the myosin forms short bipolar filaments like those of platelet myosin. Eight of eight monoclonal antibodies to platelet myosin also bind to erythrocyte myosin. Like most myosins, it has a high ATPase activity in the presence of Ca2+ or EDTA, but is inhibited by Mg2+. Myosin light-chain kinase transfers 1 phosphate from ATP to the 20-kDa light chain, and this stimulates the actin-activated ATPase. Thus, myosin may play a role in shape changes in the erythrocytes.     

Physicochemical Properties and Heat-induced Gelling of Cardiac Myosin in Model System

Some physicochemical and functional properties of cardiac myosin were studied in a model system, with particular reference to its binding ability in re-structured meat. We found that myosin solubility was strongly influenced by the pH, ionic strength, and temperature of the system and by the interaction of pH and ionic strength. For instance, myosin remained completely in solution in monomeric form at ionic strengths ≤0.2 M KCl, if the pH of system was maintained at 7.0. Highionic strength was required to keep myosin in monomeric form at low pH. With low ionic strength and pH, myosin molecules tend to form aggregated filaments.

Like skeletal muscle myosin, the heat-induced gel strength of cardiac myosin was also influenced by the pH, ionic strength, and temperature of the system, and it produced a gel with maximum strength (21.× 10³dyn/cm²) at pH 5.5 and 0.1 M KCl concentration on heating to 60%C. Cardiac myosin seems to form much stronger gels than skeletal muscle myosin.     

Electron microscopy of synthetic myosin filaments. Evidence for cross- bridge. Flexibility and copolymer formation

Electron micrographs of negatively stained synthetic myosin filaments reveal that surface projections, believed to be the heads of the constituent myosin molecules, can exist in two configurations. Some filaments have the projections disposed close to the filament backbone. Other filaments have all of their projections widely spread, tethered to the backbone by slender threads. Filaments formed from the myosins of skeletal muscle, smooth muscle, and platelets each have distinctive features, particularly their lengths. Soluble mixtures of skeletal muscle myosin with either smooth muscle myosin or platelet myosin were dialyzed against 0.1 M KC1 at pH 7 to determine whether the simultaneous presence of two types of myosin would influence the properties of the filaments formed. In every case, a single population of filaments formed from the mixtures. The resulting filaments are thought to be copolymers of the two types of myosin, for several reasons: (a) their length-frequency distribution is unimodal and differs from that predicted for a simple mixture of two types of myosin filaments; (b) their mean length is intermediate between the mean lengths of the filaments formed separately from the two myosins in the mixture; (c) each of the filaments has structural features characteristic of both of the myosins in the mixture; and (d) their size and shape are determined by the proportion of the two myosins in the mixture.     

Neural regulation of mammalian fast and slow muscle myosins: an electrophoretic analysis.

Mammalian nerves to fast and slow muscles have the remarkable property of changing the speed of contraction of muscles following cross-reinnervation. The biochemical basis of speed transformation is the change in myosin in ATPase activity. This paper provides electrophoretic evidence for structural changes in myosin from cross-reinnervated muscles. A method is described for the separation of intact fast and slow muscle myosins by polyacrylamide gel electrophoresis. This method utilizes the fact that ATP and its analogs prevent the formation of myosin polymers in low ionic strength buffers. In this system, normal fast muscle myosin has a higher electrophoretic mobility than slow muscle myosin. Normal rat soleus myosin has a major slow and a minor fast component due to two populations of muscle fibers. The same muscle cross-reinnervated by a fast muscle nerve shows only the fast component, The normal, homogeneous fast extensor digitorum longus muscle has only the electrophoretically fast myosin, but following cross-reinnervation it shows both fast and slow components. These results suggest that mammalian motor nerves can induce or suppress the expression of genes that code for fast and slow skeletal muscle myosins.     

Comparative studies on amino and thiol groups in myosins from different sources.

Myosins from rabbit white and red skeletal, rabbit heart, fish skeletal and chicken gizzard muscles, as well as from human platelets were subjected to trinitrophenylation by trinitrobenzene sulfonate and alkylation by N-ethylmeleimide which affected their amino and thiol groups, respectively. The blocking of amino groups was carried out in the presence or in the absence of Mg-ADP and was followed both spectrophotometrically and enzymatically. Essential amino groups, whose modification throughly changes the enzymic characteristics of myosin, were found in heart and in all skeletal muscle myosins but were absent in myosins from chicken gizzard muscle and from human platelets. The reaction of these amino groups was highly retarded in the presence of Mg-ADP. Alkylation of thiols led to loss of the K+-activated ATPase (ATP phosphohydrolase, EC 3.6.1.3) in all myosins. However, the rate of loss of activity varied from one myosin to another and, for a given myosin, was affected by the presence of nucleotides and by the value of the ionic strength. The change in Ca(2+)-activated ATPase activity (ATP phosphohydrolase, EC 3.6.1.3) on alkylation was influenced by the presence of Mg - ADP during the reaction. In the absence of this nucleotide, the Ca(2+)-ATPase activity increased and reached a plateau as a consequence of modification. The extent of activation largely depended on the origin of the myosin. When alkylation was carried out in the presence of Mg-ADP, the Ca(2+)-ATPase activity as a function of time exhibited a maximum but the descending part of the curve was absent in myosins from heart and gizzard muscles.     

A 72,000-mol-wt protein from tomato inhibits rabbit acto-S-1 ATPase activity

Tomato activation inhibiting protein (AIP) is a molecule of an apparent molecular weight of 72,000 that co-purifies with tomato actin. In an assay system containing rabbit skeletal muscle F-actin and rabbit skeletal muscle myosin subfragment-1 (myosin S-1), tomato AIP dissociated the acto-S-1 complex in the absence of Mg+2ATP and inhibited the ability of F-actin to activate the low ionic strength Mg+2ATPase activity of myosin S-1. At a molar ratio of 5 actin to 1 AIP, a 50% inhibition of the actin-activated Mg+2ATPase activity of myosin S-1 was observed. The inhibition can be reversed by raising the calcium ion concentration to 1 X 10(-5) M. The AIP had no effect on the basal low ionic strength Mg+2ATPase activity of myosin S-1 in the absence of actin. The protein did not bind directly to actin nor did it cause depolymerization or aggregation of F-actin but appeared, instead, to interact with the actin binding site on myosin S-1. Since AIP is a potent, reversible inhibitor of the rabbit acto-S-1 ATPase activity, it is postulated that it may be responsible for the low levels of actin activation exhibited by tomato F-actin fractions containing the AIP.     

Rabbit cardiac myosin. I. Physical and chemical characterization of the native molecule.

Rabbit cardiac myosin, isolated from frozen tissue, was effectively purified by batchwise treatment with DEAE-cellulose in addition to suing cilution-precipitation techniques. An extensive experimental program was subsequently carried out with respect to the enzymic amino acid, optical and physicochemical properties of native cardiac myosin. This program has included the following: examination of the effects of pH and varying concentrations of ATP, CaCl2, MgCl2, and PCMB on its ATPase activity; measurement of its circular dichroic spectrum in solvent buffers, at different pH or containing ATP in the absence or presence of Ca-2+ or Mg-2+ ions; study of the concentration dependence of its viscosity and sedimentation velocity at low temperatures; and investigation of its molecular weight by the Archibald method and low- and high-speed sedimentation equilibrium. The results of these studies were consistent with the interpretation that cardiac myosin is comprised of highly asymmetric, semi-rigid molecules with a molecular weight in the order of 4.7 times 10-5, which display non-ideality even in solvent buffers of high ionic strength at neurtal pH. In addition, computer analysis of the high-speed sedimentation equilibrium data has provided evidence for the presence of a self-association reaction at low protein concentration. Even though the specif ATPase activity of cardiac myosin was found to be approximately one-third that reported for skeletal myosin in all cases, it was concluded, on the the basis of the essentially analogous physical and chemical properties of rabbit cardiac and skeletal myosin, that the two proteins are very similar in terms of molecular size, shape, and secondary structure.     

Assembly of smooth muscle myosin minifilaments: effects of phosphorylation and nucleotide binding

Small bipolar filaments, or "minifilaments," are formed when smooth muscle myosin is dialyzed against low ionic strength pyrophosphate or citrate/Tris buffers. Unlike synthetic filaments formed at approximately physiological ionic conditions, minifilaments are homogeneous as indicated by their hypersharp boundary during sedimentation velocity. Electron microscopy and hydrodynamic techniques were used to show that 20-22S smooth muscle myosin minifilaments are 380 nm long and composed of 12-14 molecules. By varying solvents, a continuum of different size polymers in the range of 15-30S could be obtained. Skeletal muscle myosin, in contrast, preferentially forms a stable 32S minifilament (Reisler, E., P. Cheung, and N. Borochov. 1986. Biophys. J. 49:335-342), suggesting underlying differences in the assembly properties of the two myosins. Addition of salt to the smooth muscle myosin minifilaments caused unidirectional growth into a longer "side-polar" type of filament, whereas bipolar filaments were consistently formed by skeletal muscle myosin. As with synthetic filaments, addition of 1 mM MgATP caused dephosphorylated minifilaments to dissociate to a mixture of folded monomers and dimers. Phosphorylation of the regulatory light chain prevented disassembly by nucleotide, even though it had no detectable effect on the structure of the minifilament. These results suggest that differences in filament stability as a result of phosphorylation are due largely to conformational changes occurring in the myosin head, and are not due to differences in filament packing.     

Some motile properties of fast characean myosin

We improved a motility assay system by using an affinity-purified antibody against the C-terminal globular domain of characean myosin. This improvement allowed us to study the sensitivity to ionic strength or the processivity of characean myosin. The sliding velocity of actin filaments on a characean myosin-coated surface was unaffected by ionic strength. This property is unlike that of skeletal or smooth muscle myosin and suggests that the binding manner of characean myosin to actin is different from that in other muscle myosins. The sliding velocity decreased when the MgADP concentration was raised. The extent of inhibition by MgADP on the motile activity of characean myosin was almost the same as in skeletal muscle or cardiac myosin. The number of sliding filaments on the characean myosin-coated surface decreased drastically with a decrease in the motor density. The motor density required to produce a successful movement of actin filament was about 200 molecules/microm(2). These results suggest that the characean myosin is not a processive motor protein.     

The binding of skeletal muscle C-protein to F-actin, and its relation to the interaction of actin with myosin subfragment-1.

C-protein is a component of thick filaments of skeletal muscle myofibrils. It is bound to the assembly of myosin tails that forms the filament backbone. We report here that C-protein can also bind to F-actin, with a limiting stoichiometry of approximately one C-protein molecule per 3 to 5 actin subunits and a dissociation constant in the micromolar range at ionic strength 0·07. The binding is not significantly affected by ATP, calcium ions or temperature, or by the presence of tropomyosin on the actin, but it is weakened by increasing ionic strength. Myosin subfragment-1 (S-1) competes with C-protein for binding to actin. In the absence of ATP, S-1 displaces nearly all bound C-protein from actin, while in the presence of ATP, C-protein inhibits the actin activation of S-1 ATPase. Although there is no direct evidence that interaction of C-protein with actin is physiologically significant, the lenght of the C-protein molecule is sufficient so that it could make contact with the thin filaments in muscle while remaining attached to the thick filaments.     

Myosin subunit interactions. Localization of the alkali light chains

Myosin homodimers, molecules containing either the A1 or the A2 light chain, do not exchange their light chains under conditions approximating physiological temperature and ionic strength. Myosin heterodimers, molecules containing both A1 and A2 light chains, are therefore formed at the time of synthesis rather than by a labile subunit exchange. Antibodies specific for the amino-terminal region of the alkali light chains were used to localize these subunits in myosin by immunoelectron microscopy. The close proximity of the alkali light chain to the 5,5'-dithiobis-(2-nitrobenzoic acid) light chain in the "neck" region of the myosin head is consistent with the finding that the 5,5'-dithiobis-(2-nitrobenzoic acid) light chain influences subunit interactions between the alkali light chain and heavy chain in vertebrate skeletal muscle myosin.