Synthesis and fluorescent properties of oligonucleotides, containing a new fluorescent marker--n-(2-benzoxazolyl)tolane]

A functional (dihydroxybutyl) derivative of p-(2-benzoxazolyl)tolane, a fluorescent label novel for biopolymers, was synthesized. The functionalized solid support obtained on its basis was employed in the synthesis of oligodeoxynucleotides 3-terminally labeled with benzoxazolyltolane (these oligonucleotides also contained 1-phenylethynylpyrene residues). This fluorophore within its dihydroxybutyl derivative and the oligonucleotides modified with it displays an intensive fluorescence characterized by a high Stokes shift. The oligonucleotides labeled with this fluorophore are potential probes sensitive to the biopolymer microenvironment.     

Synthesis and fluorescence studies of multiple labeled oligonucleotides containing dansyl fluorophore covalently attached at 2'-terminus of cytidine via carbamate linkage

Synthesis of modified oligonucleotides in which the specific cytidine nucleoside analogues linked at 2'-OH position via a carbamate bond with an amino ethyl derivative of dansyl fluorophore is reported. For the multiple labeling of oligonucleotides, a strategy involving prelabeling at the monomeric level followed by solid phase assembly of oligonucleotides to obtain regiospecifically labeled probes has been described. The labeled monomer was phosphitylated using 2-cyanoethyl-N,N,N',N'-tetraisopropyl-phosphoramidite (Bis-reagent) and pyridiniumtrifluoro acetate (Py.TFA) as an activator. To ascertain the minimal number of labeled monomers required for a specific length of oligonucleotide for detection and also to assess the effect of carbamate linkage on hybridization, hexamer and 20-mer sequences were selected. Both were labeled with 1, 2, and 3 monomers at the 5'-end and hybridized with normal (unmodified) complementary sequences. As compared to midsequence or 3'-terminal labeling reported earlier, the 5'-terminal labeling has been found to have minimal contact-mediated quenching on duplex formation. This may be due to complementary deoxyguanosine (dG) rich oligonucleotide sequences or CG base pairs at a terminus that is known to yield stronger binding. This is one reason for selecting cytidine for labeling. The results may aid rational design of multiple fluorescent DNA probes for nonradioactive detection of nucleic acids.     

The Efficiency of DNA Labeling with Near-Infrared Fluorescent Dyes

The efficiency of DNA labeling was assessed for 2'-deoxyuridine 5'-triphosphate (dUTP) derivatives containing the Cy7 cyanine dye as a fluorophore. Two fluorescent Cy7-labeled dUTP analogs differed in the chemical structure of the linker between the fluorophore and nucleotide moieties. The efficiency of the polymerase chain reaction (PCR) and inhibition with modified nucleotides were estimated by real-time PCR. The efficiency of labeled nucleotide incorporation in PCR products was measured by quantitative electrophoresis. The efficiency of target DNA labeling was evaluated by binding the fluorescently labeled PCR products to a microarray of oligonucleotide probes immobilized in hydrogel drops (a biochip). The near-infrared hybridization signal was detected by digital luminescence microscopy. An increase in linker length was found to provide more efficient incorporation of the labeled nucleotide. Both of the compounds provided high sensitivity and high specificity of DNA testing via allele-specific hybridization on a biochip.

     

Synthesis and Properties of Modified Oligodeoxyribonucleotides Containing 2"-O-(2,3-Dihydroxypropyl)uridine and 2"-O-(2-Oxoethyl)uridine

A new uridine derivative, 2"-O-(2,3-dihydroxypropyl)uridine, and its 3"-phosphoramidite were obtained for direct introduction into oligonucleotides during automated chemical synthesis. Oligonucleotides 10 to 15 nt long harboring 2"-O-(2,3-dihydroxypropyl)uridine residues were synthesized; periodate oxidation of these oligomers gave oligonucleotides containing 2"-O-(2-oxoethyl)uridine residues. The presence of a reactive aldehyde group in 2" position of the carbohydrate moiety was confirmed by the interaction withp-nitrophenylhydrazine and methionine methyl ester. The thermostability of DNA duplexes containing modified units does not practically differ from that of the natural analogues.     

Fluorogenic polymerase, endonuclease, and ligase assays based on DNA substrates labeled with a single fluorophore

This paper describes the development of homogeneous, fluorogenic polymerase, restriction endonuclease, and ligase assays based on the use of DNA substrate molecules labeled with a single fluorophore. All three enzymatic assays are based on the same observed phenomenon whereby the fluorescence intensity of hairpin-type oligonucleotides with a 5′single-stranded extension, labeled with a single fluorophore, changes when the distance of the dye from the 3′ end of the molecule is altered as a result of the enzymatic transformation (i.e., polymerase extension, endonuclease hydrolysis, or ligation). The magnitudes of the observed fluorescence intensity changes range from 1.2-fold to 3.9-fold, and they are dependent on the type of dye used, its position within the substrate and product molecules, and the base composition surrounding the labeling site.     

Fluorescent fructose derivatives for imaging breast cancer cells

Breast cancer cells are known to overexpress Glut5, a sugar transporter responsible for the transfer of fructose across the cell membrane. Since Glut5 transporter is not significantly expressed in normal breast cells, fructose uptake can potentially be used to differentiate between normal and cancerous cells. Fructose was labeled with two fluorophores at the C-1 position: 7-nitro-1,2,3-benzadiazole (NBD) and Cy5.5. The labeling site was chosen on the basis of the presence and substrate specificity of the key proteins involved in the first steps of fructose metabolism. Using fluorescence microscopy, the uptake of the probes was studied in three breast cancer cell lines: MCF 7, MDA-MB-435, and MDA-MB-231. Both fluorescent fructose derivatives showed a very good uptake in all tested cell lines. The level of uptake was comparable to that of the corresponding glucose analogs, 2-NBDG and Cy5.5-DG. Significant uptake of 1-NBDF derivative was not observed in cells lacking Glut5 transporter, while the uptake of the 1-Cy5.5-DF derivative was independent of the presence of a fructose-specific transporter. While 1-NBDF showed Glut5-specific accumulation, the coupling of a large fluorophore such as Cy5.5 likely introduces big structural and electronic changes, leading to a fructose derivative that does not accurately describe the uptake of fructose in cells.     

Oligonucleotides Labeled by Fluorophores at the Sugar 2′-Positions for Fluorescence Energy Transfer Study of Nucleic Acid Structure

Abstract

Oligonucleotides containing 2′-(6-dimethylamino-2-naphthamide)uridine have been shown to be useful as a donor fluorophore in FRET to oligonucleotides labeled with fluorescein at the 2′-position as an acceptor molecule.     

Fluorescent homogeneous immunosensors for detecting pathogenic bacteria

We developed a straightforward antibody-based assay for rapid homogeneous detection of bacteria. Our sensors utilize antibody recognizing cell-surface epitopes of the target cell. Two samples of the antibody are prepared, each labeled via nanometer size flexible linkers with short complementary oligonucleotides that are modified with fluorochromes that could participate in fluorescence resonance energy transfer (FRET). The length of the complementary oligonucleotide sequences was designed such that very little annealing occurred in the absence of the target cells. In the presence of the target cells the two labeled antibodies bind to the surface of the cell resulting in a large local concentration of the complementary oligonucleotides that are attached to the antibody. This in turn drives the annealing of the complementary oligonucleotides which brings the fluorescence probes to close proximity producing large FRET signals proportional to the amount of target cells. Long flexible linkers used to attach the oligonucleotides to the antibody enable target-induced oligonucleotide annealing even if the density of surface antigens is only modest. We used Escherichia coli 0157:H7 and Salmonella typhimurium to demonstrate that this design produced sensors exhibiting rapid response time, high specificity, and sensitivity in detecting the target bacteria.     

Fluorescent oligonucleotides and deoxynucleotide triphosphates: preparation and their interaction with the large (Klenow) fragment of Escherichia coli DNA polymerase I

Fluorescent derivatives of short oligonucleotides of defined sequence were prepared by the incorporation of 5-(propylamino)uridine via current phosphoramidite chemistry, followed by derivatization of the propylamine function with mansyl chloride. These oligomers, annealed to complementary oligomers, yielded short duplex DNA fluorescently labeled at a specific base. The fluorescence emission from this labeled duplex increases upon binding to the Klenow fragment of DNA polymerase I (KF) at specific positions within the duplex DNA. By varying the position of the label within the duplex DNA and observing the emission, points of strong enzyme-DNA interactions were elucidated. A similar fluorescent derivative of a deoxynucleoside triphosphate (dNTP), 5-[[[[[[(5- sulfonaphthalenyl)amino]ethyl]amino]carbonyl]- methyl]thio]-2'-deoxyuridine 5'-triphosphate (AEDANS-S-dUTP), was synthesized, whose emission also was increased upon binding to KF. The change in emission intensities between unbound and bound substrates enabled the measurements of KDs for the DNA and dNTP derivative, which were found to be 0.15 nM and 2.9 microM, respectively. Stopped-flow measurements on these species yielded association and dissociation rates for each. Anisotropy measurements of the labeled base at various positions in the duplex yielded values that support the measurements made by observing the emission intensities.     

DNA fluorescent labeling with naphtho[1,2,3-cd]indol-6(2H)-one for investigation of protein-DNA interactions

Fluorescently labeled DNA to study protein-DNA interactions was synthesized using the Cu(I)-catalysed cycloaddition (CuAAC) reaction. For this purpose, a new azido-containing fluorophore based on the naphtho[1,2,3-cd]indol-6(2H)-one derivative was obtained. The fluorescent properties of naphtho[1,2,3-cd]indol-6(2H)-one derivatives and labeled DNA were studied. The new fluorescent DNA conjugate was shown to be a useful tool to study complex mechanisms of protein-DNA interactions.     

磷酸化底物肽的硫代磷酸化及荧光标记

以蛋白激酶Ａ的一磷酸化底物肽ＬＲＲＡＳＬＧ为模型肽,研究了硫代磷酸化及荧光标记反应条件。荧光标记试剂５－｛「（（２－碘代乙酰）氨）乙基」氨基｝萘－１－磺酸（１,５－ＩＡＥＤＡＮＳ）适宜浓度为１．６ｍｍｏｌ／Ｌ,标记反应缓冲液的适宜ｐＨ为７至８。实验了标记肽分别在Ｎ－端序列分析、电喷雾质谱和０．１％三氟乙酸存在下的稳定性。比较了标记肽和标记肽的紫外吸收光谱的差异特征。初步显示高效液相色谱蛋白酶解肽谱     

A peptide-based fluorescent ratiometric sensor for quantitative detection of proteins

A ratiometric fluorescent sensor was obtained by solid-phase synthesis of a peptide singly labeled at its N-terminus with a 3-hydroxychromone (3HC) derivative, an environmentally sensitive fluorophore with a two-band emission. The construct contains the binding site recognized by an antibody fragment, scFv1F4_Q34S, with nanomolar (nM) affinity. The dye only marginally affected the kinetic and equilibrium binding parameters of the scFv-peptide interaction, as measured by surface plasmon resonance. On interaction with the antibody fragment, the sensor showed up to 47% change in the ratio of its two emission bands, indicating an enhanced screening of the 3HC fluorophore from bulk water. Competition with two unlabeled peptides of different lengths led to a dynamic displacement of the construct governed by the relative binding constants. Calibration showed that the response is proportional to the ratio of scFv1F4_Q34S to labeled peptide. The detection limit of scFv1F4_Q34S was 15 nM. In a more complex medium (100 μg/ml bovine serum albumin), the scFv could be detected in the 50- to 100-nM range. This work demonstrates that, with the perspective of further improvements of the dye spectroscopic properties, fluorescent ratiometric sensing based on small synthetic peptides represents a promising tool for quantitative target detection.     

Oligonucleotides, part 5+: synthesis and fluorescence studies of DNA oligomers d(AT)5 containing adenines covalently linked at C-8 with dansyl fluorophore.

The synthesis of oligodeoxynucleotides d(AT)5 in which specific adenines are linked at C-8 position with dansyl fluorophores via a variable polymethylene spacer chain are reported. This was achieved by a strategy involving prelabelling at the monomeric stage followed by solid phase assembly of oligonucleotides to obtain regiospecifically labeled oligonucleotides. Several mono and polydansyl d(AT)5 derivatives in which the fluorophore is linked via ethylene, tetramethylene and hexamethylene spacer arms were synthesised for a systematic study of their fluorescence characteristics. It was observed that (i) enhancements in fluorescence intensity and emission quantum yields are seen due to multiple labelling, (ii) the magnitude of enhancements are related to labelling configuration and (iii) quenching efficiency is minimal with shorter and rigid spacer arms. The results may aid rational design of multiple fluorescent DNA probes for nonradioactive detection of nucleic acids.     

Fluorescent ligands for adenosine receptors

Interest is increasing in developing fluorescent ligands for characterization of adenosine receptors (ARs), which hold a promise of usefulness in the drug discovery process. The size of a strategically labeled AR ligand can be greatly increased after the attachment of a fluorophore. The choice of dye moiety (e.g. Alexa Fluor 488), attachment point and linker length can alter the selectivity and potency of the parent molecule. Fluorescent derivatives of adenosine agonists and antagonists (e.g. XAC and other heterocyclic antagonist scaffolds) have been synthesized and characterized pharmacologically. Some are useful AR probes for flow cytometry, fluorescence correlation spectroscopy, fluorescence microscopy, fluorescence polarization, fluorescence resonance energy transfer, and scanning confocal microscopy. Thus, the approach of fluorescent labeled GPCR ligands, including those for ARs, is a growing dynamic research field.     

Fluorescent proteins for single‐molecule fluorescence applications

We present single‐molecule fluorescence data of fluorescent proteins GFP, YFP, DsRed, and mCherry, a new derivative of DsRed. Ensemble and single‐molecule fluorescence experiments proved mCherry as an ideally suited fluorophore for single‐molecule applications, demonstrated by high photostability and rare fluorescence‐intensity fluctuations. Although mCherry exhibits the lowest fluorescence quantum yield among the fluorescent proteins investigated, its superior photophysical characteristics suggest mCherry as an ideal alternative in single‐molecule fluorescence experiments. Due to its spectral characteristics and short fluorescence lifetime of 1.46 ns, mCherry complements other existing fluorescent proteins and is recommended for tracking and localization of target molecules with high accuracy, fluorescence resonance energy transfer (FRET), fluorescence lifetime imaging microscopy (FLIM), or multicolor applications. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Determination of oligonucleotide molecular masses by MALDI mass spectrometry

MALDI mass spectrometry (MS) of 14- to 42-mer homogeneous oligonucleotides and their mixtures was carried out using a Vision 2000 instrument (Thermo BioAnalysis, Finnigan, United States). Conditions for the determination of oligonucleotide molecular masses were optimized by applying various matrices and operation modes. The most reproducible results with minimal uncontrolled decomposition of the oligonucleotides including their apurinization during the MALDI MS registration were obtained using 2,4,6-trihydroxyacetophenone as a matrix instead of 3-hydroxypicolinic acid usually employed in the mass spectrometry of oligonucleotides. Our approach allows the determination of molecular masses of oligonucleotides obtained by chemical synthesis and the evaluation of their component composition and purity. It was applied to the mass spectrometric analysis of oligonucleotides containing a 3-(methyl-C-phosphonate) group or a modified 1,N ⁶-ethenodeoxyadenosine unit.__________Translated from Bioorganicheskaya Khimiya, Vol. 31, No. 2, 2005, pp. 151–158.Original Russian Text Copyright © 2005 by Streletskii, Kozlova, Esipov, Kayushin, Korosteleva, Esipov.     

Minimizing the Influence of Fluorescent Tags on IgG Partition in PEG–Salt Aqueous Two‐Phase Systems for Rapid Screening Applications

Aqueous two‐phase extraction (ATPE) has been showing significant potential in the biopharmaceutical industry, allowing the selective separation of high‐value proteins directly from unclarified cell culture supernatants. In this context, effective high‐throughput screening tools are critical to perform a rapid empirical optimization of operating conditions. In particular, microfluidic ATPE screening devices, coupled with fluorescence microscopy to continuously monitor the partition of fluorophore‐labeled proteins, have been recently demonstrated to provide short diffusion distances and rapid partition, using minimal reagent volumes. Nevertheless, the currently overlooked influence of the labeling procedure on partition must be carefully evaluated to validate the extrapolation of results to the unlabeled molecule. Here, three fluorophores with different global charge and reactivity selected to label immunoglobulin G (IgG) at degrees of labeling (DoL) ranging from 0.5 to 7.6. Labeling with BODIPY FL maleimide (DoL = 0.5), combined with tris(2‐carboxyethyl) phosphine (TCEP) to generate free thiol groups, is the most promising strategy to minimize the influence of the fluorophore on partition. In particular, the partition coefficient (K_p) measured in polyethylene glycol (PEG) 3350–phosphate systems with and without the addition of NaCl using microtubes (batch) or microfluidic devices (continuous) is comparable to those quantified for the native protein.     

Fluorescent lipoprotein probe

The fluorescent cholesterol analog cholesta-5,7,9(11)triene-3-β-ol was used to label high-density and low-density lipoproteins in vivo (rabbit) and in vitro (human). Rabbit feeding experiments demonstrated that in vivo both the esterified and nonesterified forms of the fluorophore were incorporated by these particles. Using in vitro labeling techniques, it was possible to selectively incorporate either the free form of the fluorophore or both the free and the esterified forms depending upon the presence or absence of serum esterases during incubation. Subsequent to labeling, the thermotropic behavior of the low- and high-density lipoproteins was evaluated using temperature-dependent fluorescence intensity measurements. Purified low-density lipoprotein samples (human and rabbit) containing both forms of the fluorophore were observed to undergo a thermotropic transition between 27 and 32°C. However, this transition was not observed in low-density lipoprotein samples containing only the nonesterified form of the probe nor was it observed in any of the high-density lipoprotein samples, even those containing both forms of the fluorophore. These results provide further evidence that the previously reported thermotropic transition in low-density lipoprotein is due to a reordering of the low-density lipoprotein cholesterol ester core (Deckelbaum, R.J., Shipley, G. G., Small, D. M., Lees, R. S., and George, P. K. (1975) Science190, 392–394; Sears, B., Deckelbaum, R. J., Janiak, M. J., Shipley, G. G., and Small, D. M. (1976) Biochemistry15, 4151–4157; Chana, G. S., Sheppard, R. J., Mills, G. L., and Grant, E. H. (1980) Phys. Med. Biol.25, 427–432).     

Selective labeling of α-bungarotoxin with fluorescein isothiocyanate and its use for the study of toxin-acetylcholine receptor interactions

The main product of the reaction of fluorescein isothiocyanate (FITC) and bungarotoxin (Bgt) under near stoichiometric conditions is a monofluorescein derivative preferentially labeled at Lys 26, a highly conserved residue known to be involved in the binding (McDaniel, C. S., Manshouri, T., and Atassi, M. Z. (1987)J. Prot. Chem. 6, 455–461; Garcia-Borron, J. C., Bieber, A. L., and Martinez-Carrion, M. (1987)Biochemistry 26, 4295–4303) of postsynaptic neurotoxins specific for the nicotinic acetylcholine receptor (AcChR). The fluorescently labeled toxin retains a high affinity for the AcChR, and an unaltered specificity. Binding of FITC-Bgt to AcChR results in a significant decrease in the fluorescence intensity of the probe. This AcChR-mediated quenching of FITC-Bgt fluorescence allows for a continuous monitoring of the binding process. The quenching of free and bound FITC-Bgt by charged and neutral quenchers shows few fluorophore accessibility changes as induced by the toxin-bound state. The results are consistent with a model in which the positively charged concave surface of the toxin interacts with a negatively charged complementary surface in the receptor molecule.