Development of an amperometric immunosensor for detection of staphylococcal enterotoxin type A in cheese

This paper reports a novel electrochemical immunosensor for the sensitive detection of staphylococcal enterotoxin A (SEA) based on self-assembly monolayer (SAM) and protein A immobilization on gold electrode. Three different methods of protein A immobilization were tested: physical adsorption, cross-linking using glutaraldehyde and covalent binding after activation with N-hydroxysuccinimide (NHS)/N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) on cysteamine-modified gold electrode. The EDC/NHS method for protein A immobilization was selected to lead development of the biosensor. The coating steps of the surface modification were characterized by cyclic voltammetry and the biosensor response by chronoamperometry. The advantages of the immunosensor were exposed in its high sensitivity and specificity. The proposed amperometric immunosensor was successfully used for determination of SEA in contaminated and non-contaminated cheese samples with excellent responses.     

Electrochemical impedance detection of DNA hybridization based on dendrimer modified electrode

Bioactive ultrathin films with the incorporation of amino-terminated G4 PAMAM dendrimers have been prepared via layer-by-layer self-assembly methods on a gold electrode and used for the DNA hybridization analysis. Surface plasmon resonance (SPR), X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS) are used to characterize the successful construction of the multicomponent film on the gold substrate. The dendrimer-modified surfaces improve the immobilization capacity of the probe DNA greatly, compared to the AET (2-aminoethanethiol) SAM sensor surfaces without dendrimer molecules. DNA hybridization analysis is monitored by EIS. The dendrimer-based electrochemical impedance DNA biosensor shows high sensitivity and selectivity for DNA hybridization assay. The multicomponent films also display a high stability during repeated regeneration and hybridization cycles.     

DNA microdevice for electrochemical detection of Escherichia coli 0157:H7 molecular markers

An electrochemical DNA sensor based on the hybridization recognition of a single-stranded DNA (ssDNA) probe immobilized onto a gold electrode to its complementary ssDNA is presented. The DNA probe is bound on gold surface electrode by using self-assembled monolayer (SAM) technology. An optimized mixed SAM with a blocking molecule preventing the nonspecific adsorption on the electrode surface has been prepared. In this paper, a DNA biosensor is designed by means of the immobilization of a single stranded DNA probe on an electrochemical transducer surface to recognize specifically Escherichia coli (E. coli) 0157:H7 complementary target DNA sequence via cyclic voltammetry experiments. The 21 mer DNA probe including a C6 alkanethiol group at the 5' phosphate end has been synthesized to form the SAM onto the gold surface through the gold sulfur bond. The goal of this paper has been to design, characterise and optimise an electrochemical DNA sensor. In order to investigate the oligonucleotide probe immobilization and the hybridization detection, experiments with different concentration of DNA and mismatch sequences have been performed. This microdevice has demonstrated the suitability of oligonucleotide Self-assembled monolayers (SAMs) on gold as immobilization method. The DNA probes deposited on gold surface have been functional and able to detect changes in bases sequence in a 21-mer oligonucleotide.     

Self-assembly DNA-conjugated polymer for detection of single nucleotide polymorphism

We developed a self-assembly DNA-conjugated polymer based on polyacrylic acid (PAA) for DNA chip fabrication. A 20-mer single-stranded DNA (ssDNA, probe-1), and 3-(2-pyridyldithio)propionyl hydrazide (PDPH), for promoting self-assembled immobilization, were both covalently attached to PAA as sidechains. This DNA-conjugated PAA was then spontaneously immobilized on a gold substrate. Probe-1 on the immobilized polymer was hybridized to a 34-mer ssDNA (probe-2), which had the sequence desired for analyzing the target DNA. The fluorescence intensity after incubating the P-1 DNA-conjugated polymer with probe-2 DNA was much higher than with control sequence in the first hybridization. The interactions between target DNA and the DNA-conjugated PAA were investigated by fluorescence measurement. The interaction of fully matched target DNA with this immobilized DNA conjugated polymer has been studied at different ion strength conditions. SNP sequences as targets showed less than 15% the intensity of fully matched target DNA in the second hybridization, indicating that the gold surfaces coated with the DNA-conjugated PAA was highly specific to fully matched DNA. The DNA-conjugated PAA immobilized on a gold substrate is characterized by reduced nonspecific adsorption, due to less electrostatic repulsion as well as the polymer coating. Therefore, DNA-conjugated PAA can be used for probe DNA immobilization method.     

Development of DNA electrochemical biosensor based on covalent immobilization of probe DNA by direct coupling of sol-gel and self-assembly technologies

A new procedure for fabricating deoxyribonucleic acid (DNA) electrochemical biosensor was developed based on covalent immobilization of target single-stranded DNA (ssDNA) on Au electrode that had been functionalized by direct coupling of sol-gel and self-assembled technologies. Two siloxanes, 3-mercaptopropyltrimethoxysiloxane (MPTMS) and 3-glycidoxypropyltrimethoxysiloxane (GPTMS) were used as precursors to prepare functionally self-assembly sol-gel film on Au electrode. The thiol group of MPTMS allowed assembly of MPTMS sol-gel on gold electrode surface. Through co-condensation between silanols, GPTMS sol-gel with epoxide groups interconnected into MPTMS sol-gel and enabled covalent immobilization of target NH(2)-ssDNA through epoxide/amine coupling reaction. The concentration of MPTMS and GPTMS influenced the performance of the resulting biosensor due to competitive sol-gel process. The linear range of the developed biosensor for determination of complementary ssDNA was from 2.51 x 10(-9) to 5.02 x 10(-7)M with a detection limit of 8.57 x 10(-10)M. The fabricated biosensor possessed good selectivity and could be regenerated. The covalent immobilization of target ssDNA on self-assembled sol-gel matrix could serve as a versatile platform for DNA immobilization and fabrication of biosensors.     

Investigation of DNA orientation on gold by EC-STM.

The immobilization of thiol-derivatized DNA on a Au (111) single crystal surface by self-assembly has been investigated by electrochemical scanning tunneling microscopy (EC-STM). Continuous potential-dependent orientation changes of double-stranded oligodeoxynucleotides (ODN) have been observed in a certain potential range from 200 to 600 mV (versus SCE). It is suggested that the DNA duplexes stand straight on the gold surface at potentials negative of the potential of zero charge (pzc) and then lay down on the surface when the potential shifts positively. These results are in agreement with the expectation based on the Coulombic interaction consideration between negatively charged DNA helices and gold surface. As the applied potential shifts positively, the surface charge changes from negative to positive, that is, the Coulombic force between negatively charged DNA helices and gold surfaces changes from repulsion to attraction. However, for the single-stranded oligodeoxynucleotides, no distinct changes in the surface structure were observed with the applied potential.     

Electrochemical studies of DNA immobilization onto the azide-terminated monolayers and its interaction with taxol

A surface modification procedure for the creation of self-assembled monolayers (SAMs) that can be used as a scaffold for double-stranded DNA (dsDNA) incorporation onto the gold surfaces is described. The SAMs of an azidohexane thiol derivative were prepared on the Au electrode and then used for the immobilization of dsDNA. The electrochemical characteristics of dsDNA onto the SAM-modified gold electrode were investigated by cyclic voltammetry and electrochemical impedance spectroscopy, and the surface concentration of dsDNA onto the SAMs surface was estimated. The interaction of dsDNA with the anticancer drug, taxol (paclitaxel), was also studied on the surface of DNA/SAM/Au electrode. The observed decrease in the guanine oxidation peak current was used to monitor the interaction of taxol with DNA. The resulting Langmuir isotherm for taxol binding to DNA at the modified electrode was used to evaluate the binding constant of taxol-DNA. The results obtained supported the groove binding interaction of taxol with DNA. The modified electrode was used as a sensitive sensor for quantification of taxol in human serum sample.     

Studies of temperature-dependent electronic transduction on DNA hairpin loop sensor

A self-assembly monolayer (SAM) of hairpin DNA can be formed on a gold substrate in order to make special biosensors. Labeling the hairpin loop probes with electroactive compositions rather than a fluorophore illustrates interesting profiles of redox current versus temperature. For a biosensor interacting with perfectly complementary targets, the profile shows a characteristic plateau, which disappears when the targets have a single base variation. The plateau is split into multiple steps by tuning the hybridization temperature. We propose that the phenomena are due to hairpin loop compartmentalization. The novel characteristics lead to a thermal gradient detection method that permits perfect discrimination of a target sequence from single nucleotide mismatches.     

Electrical detection of biomolecular interactions with metal-insulator-semiconductor diodes

We report the label-free detection of DNA hybridization using a metal-insulator-semiconductor (MIS) diode or capacitor. Upon immobilization of single-stranded DNA on the gold gate of a MIS capacitor, the capacitance versus voltage characteristics show a significant shift in the direction of negative voltages as expected from the immobilization of negative charges on the gate. The hybridization with the complementary strand gives rise to a further significant shift in the same direction as before, which is consistent with the increase of negative charges on the gate brought about by the hybridization. Fluorescence studies indicate that the immobilization and hybridization of DNA can be electrostatically promoted by electric fields externally applied to the MIS capacitors. The MIS diode detection method is applicable to all biomolecular interactions that affect the surface dipole at the interface between the metal gate and the electrolyte and can be extended to other chemical and biochemical systems such as proteins and cells.     

Optimization of DNA-directed immobilization on mixed oligo(ethylene glycol) monolayers for immunodetection

The development of protein chips has suffered from problems regarding long-term protein stability and activity. We present a protein sensor surface for immunodetection that is prepared by a DNA-directed protein immobilization method on a mixed self-assembled monolayer (SAM). By this approach, an immobilized single-stranded DNA (ssDNA) surface can be transferred/modified into a protein chip by flowing in ssDNA-conjugated protein when the protein chip measurement is needed. Therefore, the long-term stability of the protein chip will not be a problem for various applications. We tried various compositions for the SAM layer, the length of the ssDNA spacer, the end-point nucleotide composition, and the processes of ssDNA immobilization of the SAM for an optimized condition for shifting the DNA chip to a protein chip. The evaluations were made by using surface plasmon resonance. Our results indicated that a 50:1 ratio of oligo(ethylene glycol) (OEG)/COOH-terminated OEG and DNA sequences with 20mer are the best conditions found here for making a protein chip via a DNA-directed immobilization (DDI) method. The designed end-point nucleotide composition contains a few guanines or cytosines, and ssDNA immobilization of the SAM by dehybridizing immobilized double-stranded DNA (dsDNA) can improve the hybridization efficiency.     

A generic expression system to produce proteins that co-assemble with alkane thiol SAM

Surface biology aims to observe and control biological processes by combining bio-, surface, and physical chemistry. Self-assembled monolayers (SAM) on gold surfaces have provided excellent methods for nanoscale surface preparation for such studies. However, extension of this work requires the specific immobilization of whole protein domains and the direct incorporation of recombinant proteins into SAM is still problematic. In this study a short random coil peptide has been designed to insert into thioalkane layers by formation of a hydrophobic helix. Surface plasmon resonance (SPR) studies show that specific immobilization via the internal cysteine is achieved. Addition of the peptide sequence to the terminus of a protein at the genetic level enables the production of a range of recombinant fusion-proteins with good yield. SPR shows that the proteins display the same gold-binding behavior as the peptide. It is shown that cell growth control can be achieved by printing the proteins using soft lithography with subsequent infilling with thio-alkanes The expression plasmid is constructed so that any stable protein domain can be easily cloned, expressed, purified and immobilized.     

Electrochemical studies of kanamycin immobilization on self-assembled monolayer and interaction with DNA

The electrochemical characteristics of kanamycin onto self-assembled monolayer (SAM) modified gold electrode (SAM/Au) is investigated by cyclic voltammetry. In the potential range 0-0.6 V, Cu(II) yields a pair of stable redox waves at the bare gold electrode. E(pa) is located at 0.189 V and E(pc) at 0.254 V. In contrast, Cu(II) is reduced at a more positive potential and a decreasing current at the kanamycin SAM/Au electrode. Cu(II) and kanamycin can form a stoichiometry complex with chemical ratio of 2:1. The interaction of Cu(II)-kanamycin complex with calf thymus DNA is also studied in the solution. And the interactive mode between Cu(II)-kanamycin complex and DNA is verified by the fluorescence method. Binding constants (K) of the Cu(II)-kanamycin complex to DNA and binding site size (s) are calculated from voltammetric data and equal to 1.5 x 10(7) l/mol and 4 bp, respectively.     

Conformational transitions and redox potential shifts of cytochrome P450 induced by immobilization

Cytochrome P450 (P450) from Pseudomonas putida was immobilized on Ag electrodes coated with self-assembled monolayers (SAMs) via electrostatic and hydrophobic interactions as well as by covalent cross-linking. The redox and conformational equilibria of the immobilized protein were studied by potential-dependent surface-enhanced resonance Raman spectroscopy. All immobilization conditions lead to the formation of the cytochrome P420 (P420) form of the enzyme. The redox potential of the electrostatically adsorbed P420 is significantly more positive than in solution and shows a steady downshift upon shortening of the length of the carboxyl-terminated SAMs, i.e., upon increasing the strength of the local electric field. Thus, two opposing effects modulate the redox potential of the adsorbed enzyme. First, the increased hydrophobicity of the heme environment brought about by immobilization on the SAM tends to upshift the redox potential by stabilizing the formally neutral ferrous form. Second, increasing electric fields tend to stabilize the positively charged ferric form, producing the opposite effect. The results provide insight into the parameters that control the structure and redox properties of heme proteins and contribute to the understanding of the apparently anomalous behavior of P450 enzymes in bioelectronic devices.     

An FET-type charge sensor for highly sensitive detection of DNA sequence

We have fabricated an field effect transistor (FET)-type DNA charge sensor based on 0.5 microm standard complementary metal oxide semiconductor (CMOS) technology which can detect the deoxyribonucleic acid (DNA) probe's immobilization and information on hybridization by sensing the variation of drain current due to DNA charge and investigated its electrical characteristics. FET-type charge sensor for detecting DNA sequence is a semiconductor sensor measuring the change of electric charge caused by DNA probe's immobilization on the gate metal, based on the field effect mechanism of MOSFET. It was fabricated in p-channel (P) MOSFET-type because the phosphate groups present in DNA have a negative charge and this charge determines the effective gate potential of PMOSFET. Gold (Au) which has a chemical affinity with thiol was used as the gate metal in order to immobilize DNA. The gate potential is determined by the electric charge which DNA possesses. Variation of the drain current versus time was measured. The drain current increased when thiol DNA and target DNA were injected into the solution, because of the field effect due to the electrical charge of DNA molecules. The experimental validity was verified by the results of mass changes detected using quartz crystal microbalance (QCM) under the same measurement condition. Therefore it is confirmed that DNA sequence can be detected by measuring the variation of the drain current due to the variation of DNA charge and the proposed FET-type DNA charge sensor might be useful in the development for DNA chips.     

Comparison of different protein immobilization methods on quartz crystal microbalance surface in flow injection immunoassay.

In this study, a quartz crystal microbalance (QCM) system operated repetitively in flow injection analysis (FIA) mode, is reported. Four immobilization approaches of seven different methods include: (i) physical adsorption; (ii) two thioamine thiolation methods, using cysteamine and cystamine for gold chemisorption and further coupling; (iii) two oxidized dextran spacer methods, coupling of cysteamine and cystamine thiolated QCM surface with periodate-oxidized dextran for further Schiff acid-base reaction; and (iv) two thiol-gold chemisorption-based self-assembled monolayer (SAM), applying short-chain, C(3), and long-chain, C(11), mercapto fatty acids to insolubilize human serum albumin (HSA) on QCM surface. Effects of these protein immobilization methods on FIA immunoassay of anti-HSA were compared. At the 0.01 mg/ml anti-HSA level, the lowest analyte concentration tested, the SAM using 11-mercaptoundecanoic acid as QCM surface activating agent generated a larger frequency shift than the other immobilization methods. This implied that the use of thiolated long-chain fatty acid constructed as self-assembled monolayer may thereby potentially be a useful protein immobilization method in QCM-FIA application.     

Self-assembled monolayers with latent aldehydes for protein immobilization

Aldehyde functions are widely used for immobilization of biomolecules on glass surfaces but have found little attention for biofunctionalization of self-assembled monolayers (SAMs) on gold, due to interference between thiol and aldehyde functions. This problem was recently solved by synthesis of an alkanethiol that carried a vicinal diol group [Jang et al. (2003) Nano Lett. 3, 691-694]. The latter served as a latent aldehyde function that was unmasked by short exposure of the vicinal diol-terminated SAM to aqueous periodate. However, the synthesis of the new vicinal diol-terminated alkane thiol was time-consuming and had an overall yield of approximately 3.5%. In the present study, a general modular strategy was introduced by which SAM components with vicinal diol functions were rapidly synthesized with high yield: this was accomplished by amide bond formation between a SAM-forming carboxylic acid (exemplified by lipoic acid and 16-mercaptohexadecanoic acid) with 3-aminopropane-1,2-diol, using suitable protecting groups. The disulfide or free thiol group afforded SAM formation on gold and, after periodate oxidation of the vicinal diol functions, proteins were covalently bound via their lysine residues. At 1 mg/mL protein concentration, complete surface coverage was reached within minutes. No further protein was bound by nonspecific adsorption, but cognate proteins were specifically bound with high capacity. Pyrogallol-O-hexadecanoic acid and 10-undecenoic acid were also coupled with 3-aminopropane-1,2-diol by amide bond formation, thereby producing latent aldehyde-containing SAM components for metal oxides and hydrogen-terminated silicon, respectively, to show the general usefulness of the new synthetic design.     

Optical detection of DNA hybridization based on fluorescence quenching of tagged oligonucleotide probes by gold nanoparticles

A novel system for the detection of DNA hybridization in a homogeneous format is developed. This method is based on fluorescence quenching by gold nanoparticles used as both nanoscaffolds for the immobilization of capture sequences and nanoquenchers of fluorophores attached to detection sequences. The oligonucleotide-functionalized gold nanoparticles are synthesized by derivatizing the colloidal gold solution with 5'-thiolated 12-base oligonucleotides. Introduction of sequence-specific target DNAs (24 bases) into the mixture containing dye-tagged detection sequences and oligonucleotide-functionalized gold nanoparticles results in the quenching of carboxytetramethylrhodamine-labeled DNA fluorescence because DNA hybridization occurs and brings fluorophores into close proximity with oligonucleotide-functionalized gold nanoparticles. The quenching efficiency of fluorescence increases with the target DNA concentration and provides a quantitative measurement of sequence-specific DNA in sample. A linearity is obtained within the range from 1.4 to 92 nM. The target sequence is detected down to 2 nM. This new system not only overcomes many of the drawbacks inherent in radioisotopic measurement or enzyme-linked assay but also avoids the requirement for the stem-loop structure compared with conventional molecular beacons. Furthermore, the background signal that is defined as fluorescence quenching arising from electrostatic attraction between positively charged fluorophores and negatively charged gold nanoparticles is comparatively low due to electrostatic repulsion between negatively charged oligonucleotides. In addition, this is a homogeneous assay that can offer the potential to be monitored in real time, be amenable to automation, eliminate washing steps, and reduce the risk of contamination.     

Hybridization biosensor using di(2,2'-bipyridine)osmium (III) as electrochemical indicator for detection of polymerase chain reaction product of hepatitis B virus DNA

A novel hepatitis B virus (HBV) DNA biosensor was developed by immobilizing covalently single-stranded HBV DNA fragments to a gold electrode surface via carboxylate ester to link the 3(')-hydroxy end of the DNA with the carboxyl of the thioglycolic acid (TGA) monolayer. A short-stranded HBV DNA fragment (181bp) of known sequence was obtained and amplified by PCR. The surface hybridization of the immobilized single-stranded HBV DNA fragment with its complementary DNA fragment was evidenced by electrochemical methods using [Os(bpy)(2)Cl(2)](+) as a novel electroactive indicator. The formation of double-stranded HBV DNA on the gold electrode resulted in a great increase in the peak currents of [Os(bpy)(2)Cl(2)](+) in comparison with those obtained at a bare or single-stranded HBV DNA-modified electrode. The mismatching experiment indicated that the surface hybridization was specific. The difference between the responses of [Os(bpy)(2)Cl(2)](+) at single-stranded and double-stranded DNA/TGA gold electrodes suggested that the label-free hybridization biosensor could be conveniently used to monitor DNA hybridization with a high sensitivity. X-ray photoelectron spectrometry technique has been employed to characterize the immobilization of single-stranded HBV DNA on a gold surface.     

Development of an immunosensor for human ferritin, a nonspecific tumor marker, based on surface plasmon resonance

A direct human ferritin immunosensor was developed using anti-human ferritin monoclonal antibodies (MAbs) immobilized on the gold surface of a self-assembled surface plasmon resonance (SPR) apparatus. A kind of self-assembled monolayer (SAM) prepared by cystamine-glutaraldehyde method was applied to immobilize the MAbs. The reusability of the sensor chip adopting the SAM was found to be better than the other immobilization methods including adsorption, protein A, concanavalin A method. Ten cycles of measurements could be performed on the same chip regenerated with a 0.1M HCl solution. A linear relationship existed between the angle shifts (millidegrees) and the log values of ferritin concentrations in the range from 0.2 to 200 ng/ml in buffer and human serum. When used for 15 days, the angle shifts were all >95% of those on the response at the first day. A 10 M NaOH solution was used for clearing nonspecific binding in human serum. Correlation coefficient was 0.991 between this SPR method and chemiluminescent immunoassay for determination of ferritin in clinical human serum samples. The SPR sensor offers advantages of simplicity of immobilization, high sensitivity, high specificity, low sample requirement, high reusability, no label and no pretreatment etc.     

Engineering bioactive surfaces with Fischer carbene complex: protein A on self-assembled monolayer for antibody sensing

A Fischer carbene complex was grafted onto self-assembled monolayers (SAMs) on gold or glass by a copper-free "click" reaction. Pendant lysine residues of protein A obtained from Staphylococcus aureus rapidly reacted with the electrophilic metal complex on SAM effecting a covalent attachment of protein A with the surface. The protein A coated surface further led to bioaffinity immobilization of rabbit IgG in an oriented manner, a feature that also permits its purification from rabbit serum. Rabbit IgG could be removed from protein A coated surface by pH adjustment. The regenerated protein A surface was reused three times without loss of activity.