Cellular response to magnetic nanoparticles "PEGylated" via surface-initiated atom transfer radical polymerization

A new method to PEGylate magnetic nanoparticles with a dense layer of poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) by surface-initiated atom transfer radical polymerization (ATRP) is reported. In this approach, an initiator for ATRP was first immobilized onto the magnetic nanoparticle surface, and then P(PEGMA) was grafted onto the surface of magnetic nanoparticle via copper-mediated ATRP. The modified nanoparticles were subjected to detailed characterization using FTIR, XPS, and TGA. The P(PEGMA)-immobilized nanoparticles dispersed well in aqueous media. The saturation magnetization values of the P(PEGMA)-immobilized nanoparticles were 19 emu/g and 11 emu/g after 2 and 4 h polymerization respectively, compared to 52 emu/g for the pristine magnetic nanoparticles. The response of macrophage cells to pristine and P(PEGMA)-immobilized nanoparticles was compared. The results showed that the macrophage cells are very effective in cleaning up the pristine magnetic nanoparticles. With the P(PEGMA)-immobilized nanoparticles, the amount of nanoparticles internalized into the cells is greatly reduced to <2 pg/cell over a 5 day period. With this amount of nanoparticles uptake, no significant cytotoxicity effects were observed.     

Antibacterial polypropylene via surface-initiated atom transfer radical polymerization

Polypropylene (PP) coated by a non-leachable biocide was prepared by chemically attaching poly(quaternary ammonium) (PQA) to the surface of PP. The well-defined poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA), a precursor of PQA, was grown from the surface of PP via atom transfer radical polymerization (ATRP). The tertiary ammine groups in PDMAEMA were consequently converted to QA in the presence of ethyl bromide. Successful surface modification was confirmed by ATR-FTIR, contact angle measurement, and an antibacterial activity test against Escherichia coli (E. coli). The biocidal activity of the resultant surfaces depends on the amount of the grafted polymers (the number of available quaternary ammonium units). With the same grafting density, the surface grafted with relatively high MW polymers (M(n) > 10,000 g/mol) showed almost 100% killing efficiency (killing all of the input E. coli (2.9 x 10(5)) in the shaking test), whereas a low biocidal activity (85%) was observed for the surface grafted with shorter PQA chains (M(n) = 1,500 g/mol).     

Beta-hairpin and beta-sheet formation in designed linear peptides

Recent knowledge about the determinants of beta-sheet formation and stability has notably been improved by the structural analysis of model peptides with beta-hairpin structure in aqueous solution. Several experimental studies have shown that the turn region residues can not only determine the stability, but also the conformation of the beta-hairpin. Specific interstrand side-chain interactions, hydrophobic and polar, have been found to be important stabilizing interactions. The knowledge acquired in the recent years from peptide systems, together with the information gathered from mutants in proteins, and the analysis of known protein structures, has led to successful design of a folded three-stranded monomeric beta-sheet structure.     

Modification of jute fibers with polystyrene via atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) was investigated as a method of covalently bonding polystyrene to jute (Corchorus capsularis) and as a possible approach to fiber composites with enhanced properties. Jute fibers were modified with a brominated initiator and subsequently ATRP modified to attach polystyrene and then examined using SEM, DSC, TGA, FTIR, XPS, elemental analysis, and Py-GC-MS. These techniques confirmed that polystyrene had been covalently bound to the fibers and consequently ATRP-modified jute fiber mats were used to prepare hot-pressed polystyrene composites. Composite specimens were tensile tested and fracture surfaces examined using SEM. Although SEM examination suggested different fracture modes between unmodified fiber and ATRP-modified samples, the tensile strength of modified samples was slightly lower on average than that of unmodified samples. For fiber composite applications, we conclude that further optimization of the ATRP method is required, possibly targeting higher and more uniform loading of polystyrene on the fibers.     

Folding thermodynamics of three beta-sheet peptides: a model study

We study the folding thermodynamics of a beta-hairpin and two three-stranded beta-sheet peptides using a simplified sequence-based all-atom model, in which folding is driven mainly by backbone hydrogen bonding and effective hydrophobic attraction. The native populations obtained for these three sequences are in good agreement with experimental data. We also show that the apparent native population depends on which observable is studied; the hydrophobicity energy and the number of native hydrogen bonds give different results. The magnitude of this dependence matches well with the results obtained in two different experiments on the beta-hairpin.     

Ultralow fouling polyacrylamide on gold surfaces via surface-initiated atom transfer radical polymerization

In this work, polyacrylamide is investigated as an ultralow fouling surface coating to highly resist protein adsorption, cell adhesion, and bacterial attachment. Polyacrylamide was grafted on gold surfaces via surface-initiated atom transfer radical polymerization (ATRP). Protein adsorption from a wide range of biological media, including single protein solutions of fibrinogen, bovine serum albumin, and lysozyme, dilute and undiluted human blood serum, and dilute and undiluted human blood plasma, was studied by surface plasmon resonance (SPR). Dependence of the protein resistance on polyacrylamide film thickness was examined. With the optimal film thickness, the adsorption amount of all three single proteins on polyacrylamide-grafted surfaces was <3 pg/mm(2), close to the detection limit of SPR. The average nonspecific adsorptions from 10% plasma, 10% serum, 100% plasma, and 100% serum onto the polyacrylamide-grafted surfaces were 5, 6.5, 17, and 28 pg/mm(2), respectively, comparable (if not better) than the adsorption levels on poly(ethylene glycol) (PEG) and zwitterionic poly(sulfobetaine methacrylate) surfaces, the best antifouling materials known to date. The polyacrylamide-grafted surfaces were also shown strongly resistant to adhesion from bovine aortic endothelial cells and two bacterial species, Gram-positive Staphylococcus epidermidis ( S. epidermidis ) and Gram-negative Pseudomonas aeruginosa ( P. aeruginosa ). Strong hydrogen bond with water is considered the key attribute for the ultralow fouling properties of polyacrylamide. This is the first work to graft gold surfaces with polyacrylamide brushes via ATRP to achieve ultralow fouling surfaces, demonstrating that polyacrylamide is a promising alternative to traditional PEG-based antifouling materials.     

Laccase-catalyzed polymerization of tyrosine-containing peptides

Laccase-catalyzed polymerization of tyrosine and tyrosine-containing peptides was studied in the presence and absence of ferulic acid (FA). Advanced spectroscopic methods such as MALDI-TOF MS, EPR, FTIR microscopy and HPLC-fluorescence, as well as more conventional analytical tools: oxygen consumption measurements and SDS/PAGE were used in the reaction mechanism studies. Laccase was found to oxidize tyrosine and tyrosine-containing peptides, with consequent polymerization of the compounds. The covalent linkage connecting the compounds was found to be an ether bond. Only small amounts of dityrosine bonds were detected in the polymers. When FA was added to the reaction mixtures, it was found to be incorporated into the polymer structure. Thus, in addition to homopolymers, different heteropolymers containing two or four FA residues were formed in the reactions.     

The design of linear peptides that fold as monomeric beta-sheet structures.

Current knowledge about the determinants of beta-sheet formation has been notably improved by the structural and kinetic analysis of model peptides, by mutagenesis experiments in proteins and by the statistical analysis of the protein structure database (Protein Data Bank; PDB). In the past year, several peptides comprising natural and non-natural amino acids have been designed to fold as monomeric three-stranded beta-sheets. In all these cases, the design strategy has involved both the statistical analysis of the protein structure database and empirical information obtained in model beta-hairpin systems and in proteins. Only in one case was rotamer analysis performed to check for the compatibility of the sidechain packing. It is foreseeable that, in future designs, algorithms exploring the sequence and conformational space will be employed. For the design of small proteins (less than 30 amino acids), questions remain about the demonstration of two-state behavior, the formation of a well-defined network of mainchain hydrogen bonds and the quantification of the structured populations.     

Amphiphilic beta-sheet peptides can bind to double and triple stranded DNA

It was shown that synthetic peptides with amphiphilic beta-sheet structure can bind to and stabilize double and triple stranded DNA. CD spectra indicated that beta-sheet conformation of peptides were emphasized in the presence or absence of DNA and that no significant change of DNA conformation occurred. UV melting study at pH 7.0 revealed that interaction of peptides with DNA and its hybrids are sensitive and specific depending the host structure.     

Caspase 8 mediated apoptotic cell death induced by beta-sheet forming polyalanine peptides

Expansion of a polyalanine stretch from 10 to 12-17 residues in the N-terminus of the protein PABP2 has been implicated in the genetically acquired disease oculopharyngeal muscular dystrophy, characterized by nuclear protein deposits. Here we report a correlation between the structural properties and cell toxicity of two peptides mimicking the N-terminal domain of PABP2: one containing seven and the other 11 uninterrupted alanine residues. Consistent with earlier observations, the longer peptide (11-ala) was found to adopt beta-sheet structure while the shorter one (7-ala) formed alpha-helix over a wide range of concentrations ( approximately 20-500 microM). We observed that treatment with 11-ala resulted in significantly enhanced death of Chinese hamster V79 cells, compared to the effect of treatment with 7-ala, via the cytochrome c mediated apoptotic pathway. Increases in caspase 8 and caspase 3 activity were also observed in human cells (K562) treated with 11-ala. These results indicate that the toxicity of pathogenic peptides is directly linked to their beta-sheet structure and also support recent observations that small oligomeric species of peptides and proteins are the key toxic elements in causing protein aggregation diseases.     

Subtle Recognition of 14-Base Pair DNA Sequences via Threading Polyintercalation

Small molecules that bind DNA in a sequence-specific manner could act as antibiotic, antiviral, or anticancer agents because of their potential ability to manipulate gene expression. Our laboratory has developed threading polyintercalators based on 1,4,5,8-naphthalene diimide (NDI) units connected in a head-to-tail fashion by flexible peptide linkers. Previously, a threading tetraintercalator composed of alternating minor-major-minor groove-binding modules was shown to bind specifically to a 14 bp DNA sequence with a dissociation half-life of 16 days [Holman, G. G., et al. (2011) Nat. Chem. 3, 875-881]. Herein are described new NDI-based tetraintercalators with a different major groove-binding module and a reversed N to C directionality of one of the minor groove-binding modules. DNase I footprinting and kinetic analyses revealed that these new tetraintercalators are able to discriminate, by as much as 30-fold, 14 bp DNA binding sites that differ by 1 or 2 bp. Relative affinities were found to correlate strongly with dissociation rates, while overall C(2) symmetry in the DNA-binding molecule appeared to contribute to enhanced association rates.     

Cellulose microfibrils grafted with PBA via surface-initiated atom transfer radical polymerization for biocomposite reinforcement

Immobilizing poly(butyl acrylate) (PBA) on cellulose microfibrils (CMFs) by atom transfer radical polymerization (ATRP) of butyl acrylate (BA) on the surface of 2-bromoisobutyryl-functionalized CMF generated highly hydrophobic microfibrils (CMF-PBA) with a hard core and a soft-shell structure. TGA and static water contact angle results suggested that the surfaces of the modified CMF samples were not completely covered by PBA chains until the molecular weight of grafts became sufficiently long. The GPC results indicated that the grafts with low molecular weight showed controlled/"living" characteristics of the surface-initiated ATRP; however, there existed more side reactions with the increase in molecular weights. Biocomposites consisting of polypropylene (PP) and CMF-PBA samples exhibited significantly improved compatibility, interface adhesion, and mechanical properties with the increase in PBA graft length. The findings confirmed that the longer grafts facilitated the better entanglement of PBA grafts with PP macromolecules and thus further improved the mechanical properties.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N'-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2?h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24?h exposure) and cyprid settlement (24 and 48?h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

Antibacterial activity of linear peptides spanning the carboxy-terminal beta-sheet domain of arthropod defensins

The antibacterial activity of peptides without disulfide bridges, spanning the carboxy-terminal segment of arthropod defensins, has been investigated. Although all the peptides have net positive charges, they exhibited varying antibacterial potencies and spectra. Atomic force and fluorescence microscopic analyses indicate that the peptides exert their activity by permeabilizing the outer and inner membranes of Gram-negative bacteria such as Escherichia coli. It appears that the plasticity observed in the activity of mammalian defensins with respect to sequence, number of disulfide bridges or net positive charge, is also observed in insect defensins.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N′-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2 h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24 h exposure) and cyprid settlement (24 and 48 h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

Competing intrachain interactions regulate the formation of beta-sheet fibrils in bovine PrP peptides

At the heart of the pathogenesis of transmissible spongiform encephalopathies (TSEs), such as BSE, scrapie, and Creutzfeldt-Jakob disease, lies a poorly understood structural rearrangement of PrP, an abundant glycoprotein of the nervous and lymphoid systems. The normal form (PrP(C)), rich in alpha-helix, converts into an aberrant beta-sheet-dominated form (PrP(Sc)), which seems to be at the center of the pathotoxic symptoms observed in TSEs. To understand this process better at a molecular level, we have studied the interactions between different peptides derived from bovine PrP and their structural significance. We show that two unstructured peptides derived from the central region of bovine PrP, residues 115-133 and 140-152, respectively, interact stoichiometrically under physiological conditions to generate beta-sheet-dominated fibrils. However, when both peptides are incubated in the presence of a third peptide derived from an adjoining alpha-helical region (residues 153-169), the formation of beta-sheet-rich fibrils is abolished. These data indicate that native PrP(C) helix 1 might inhibit the strong intrinsic beta-sheet-forming propensity of sequences immediately N-terminal to the globular core of PrP(C), by keeping in place intrachain interactions that would prevent these amyloidogenic regions from triggering aggregation. Moreover, these results indicate new ways in which PrP(Sc) formation could be prevented.     

Structure and assembly of designed beta-hairpin peptides in crystals as models for beta-sheet aggregation

De novo designed beta-hairpin peptides have generally been recalcitrant to crystallization. The crystal structures of four synthetic peptide beta-hairpins, Boc-Leu-Val-Val-DPro-Gly-Leu-Phe-Val-OMe (1), Boc-Leu-Phe-Val-DPro-Ala-Leu-Phe-Val-OMe (2), Boc-Leu-Val-Val-DPro-Aib-Leu-Val-Val-OMe (3), and Boc-Met-Leu-Phe-Val-DPro-Ala-Leu-Val-Val-Phe-OMe (4), are described. The centrally positioned DPro-Xxx segment promotes prime beta-turn formation, thereby nucleating beta-hairpin structures. In all four peptides well-defined beta-hairpins nucleated by central type II' DPro-Xxx beta-turns have been characterized by X-ray diffraction, providing a view of eight crystallographically independent hairpins. In peptides 1-3 three intramolecular cross-strand hydrogen bonds stabilized the observed beta-hairpin, with some fraying of the structures at the termini. In peptide 4, four intramolecular cross-strand hydrogen bonds stabilized the hairpin. Peptides 1-4 reveal common features of packing of beta-hairpins into crystals. Two-dimensional sheet formation mediated by intermolecular hydrogen bonds formed between antiparallel strands of adjacent molecule is a recurrent theme. The packing of two-dimensional sheets into the crystals is mediated in the third dimension by bridging solvents and interactions of projecting side chains, which are oriented on either face of the sheet. In all cases, solvation of the central DPro-Xxx peptide unit beta-turn is observed. The hairpins formed in the octapeptides are significantly buckled as compared to the larger hairpin in peptide 4, which is much flatter. The crystal structures provide insights into the possible modes of beta-sheet packing in regular crystalline arrays, which may provide a starting point for understanding beta-sandwich and cross-beta-structures in amyloid fibrils.     

Nanoengineered analytical immobilized metal affinity chromatography stationary phase by atom transfer radical polymerization: separation of synthetic prion peptides

Atom transfer radical polymerization (ATRP) was employed to create isolated, metal-containing nanoparticles on the surface of nonporous polymeric beads with the goal of developing a new immobilized metal affinity chromatography (IMAC) stationary phase for separating prion peptides and proteins. Transmission electron microscopy was used to visualize nanoparticles on the substrate surface. Individual ferritin molecules were also visualized as ferritin-nanoparticle complexes. The column's resolving power was tested by synthesizing peptide analogs to the copper binding region of prion protein and injecting mixtures of these analogs onto the column. As expected, the column was capable of separating prion-related peptides differing in number of octapeptide repeat units (PHGGGWGQ), (PHGGGWGQ)(2), and (PHGGGWGQ)(4). Unexpectedly, the column could also resolve peptides containing the same number of repeats but differing only in the presence of a hydrophilic tail, Q-->A substitution, or amide nitrogen methylation.