Myosin thick filaments from adult rabbit skeletal muscles

Myosin subfragment 1 (S1) forms dimers in the presence of Mg(2+) or MgADP or MgATP. The entire myosin molecule forms head-head dimers in the presence of MgATP. The angle between the two subunits in the S1 dimer is 95 degrees. Assuming that the length of the globular part of S1 is approximately 12 nm and that the S1/S2 joint (lever arm approximately 7 nm) is clearly bent, the cylinder tangent to this dimer should have a diameter of approximately 18 nm, close to the approximately 16-20 nm suggested by many studies for the diameter of thick filaments in situ. These conclusions led us to re-examine our previous model, according to which two heads from two opposite myosin molecules are inserted into the filament core and interact as dimers. We studied synthetic filaments by electron microscopy, enzyme activity assays, controlled digestion and filament-filament interaction analysis. Synthetic filaments formed by rapid dilution in the presence of 1 mM EDTA at room temperature ( approximately 22 degrees C) had all their myosin heads outside the backbone. These filaments are called superfilaments (SF). Synthetic filaments formed by slow dilution, in the presence of either 2 mM Mg(2+) or 0.5 mM MgATP and at low temperature ( approximately 0 degrees C) had one myosin head outside the backbone and one head inside. These filaments are called filaments (F). Synthetic filaments formed by slow dilution, in the presence of 4 mM MgATP at low temperature ( approximately 0 degrees C) had most of their heads inserted in the filament core. These filaments are called antifilaments (AF). These experimental results provide important new information about myosin synthetic filaments. In particular, we found that myosin heads were involved in filament assembly and that filament-filament interactions can occur via the external heads. Native filaments (NF) from rabbit psoas muscle were also studied by enzyme assays. Their structure depended on the age of the rabbit. NF from 4-month-old rabbits were three-stranded, i.e. six myosin heads per crown, two of which were inside the core and four outside. NF from 18-month-old rabbits were two-stranded (similar to F).     

In vitro motility of skeletal muscle myosin and its proteolytic fragments

We have compared actin-activated myosin ATPase activity, myosin binding to actin, and the velocity of myosin-induced actin sliding in order to understand the mechanism of myosin motility. In our in vitro assay, F-actin slides at a constant velocity, regardless of length. The F-actin could slide over myosin heads at KCl concentrations below a critical value (60 mM with myosin and HMM, 100 mM with S-1), and the sliding velocities were quite similar below the critical KCl concentration. However, at KCl concentrations close to the critical value, the sliding F-actin is attached to only one or a few particular points on the surface, each of which perhaps consists of a single head of myosin. The KATPase values for actin-activated ATPase were approximately 300 microM for S-1 and approximately 200 microM with HMM below the critical KCl concentration, and approximately 5,000 microM above the critical KCl concentration. This increase in KATPase is due to a drastic reduction in the binding affinity of myosin heads to F-actin, as determined by a proteolytic digestion method and direct observation by fluorescence microscopy. We also show that the Vmax of actin-activated myosin ATPase activity decreases steadily with increasing KCl concentration, even though the velocity of F-actin sliding remains unchanged. This result provides evidence that the ATPase activity is not necessarily linked to motility. We discuss possible models that do not require a tight coupling between myosin ATPase and motility.     

Interhead distances in myosin attached to F-actin estimated by fluorescence energy transfer spectroscopy.

Fluorescence resonance energy transfer (FRET) spectroscopy has been used to determine distances between probes attached to the most reactive sulfhydryl (SH1) group on individual myosin "heads." We measured intramolecular and intermolecular interhead distances as well as the distance between one head of heavy meromyosin (HMM) mixed with subfragment-1 (S1) heads attached to F-actin under rigor conditions. The SH1 cysteine was specifically labeled with either a donor (5-((((2-iodoacetyl)amino)ethyl)amino)naphthalene-1-sulfonic acid) or an acceptor probe (5-iodoacetamidofluorescein). In free solution, the distance between these probes was too large to allow significant FRET, but in the rigor complex with F-actin, intermolecular interhead distances between S1 molecules, HMM molecules, or S1 and HMM were determined to be 6.0-6.3 nm. The radial coordinate of the labels relative to F-actin was 5.0-6.4 nm. However, the intramolecular interhead distance in HMMs in which the two heads were labeled with D and A probes was estimated to be larger. The binding affinity of the second head of HMM(D/A) to F-actin may be reduced because of heterogeneous modification of the SH1 groups, such that the probability of single-head binding is increased.     

Structure of the myosin head in solution and the effect of light chain 2 removal.

Structural properties of rabbit skeletal myosin head (S1) and the influence of the DTNB light chain (LC2) on the size and shape of myosin heads in solution were investigated by small angle x-ray scattering. The LC2 deficient myosin head, S1 (-LC2), and the S1 containing LC2 light chain, S1 (+LC2) were studied in parallel. The respective values of the radius of gyration were found to be (40.2 +/- 0.5) A and (46.7 +/- 1) A, while the maximum dimension was (190 +/- 15) A for both species. The large difference between the two Rg values suggest that LC2 is located close to one extremity of the myosin head, in agreement with most electron microscopy observations. All models derived from the x-ray scattering pattern of the native myosin head share a common overall morphology, showing two main regions, an asymmetric globular portion which tapers smoothly into a thinner domain of roughly equivalent length making an angle of approximately 60 degrees, with a contour length of approximately 210 A.     

Myosin V is a left-handed spiral motor on the right-handed actin helix

Myosin V is a two-headed, actin-based molecular motor implicated in organelle transport. Previously, a single myosin V molecule has been shown to move processively along an actin filament in discrete approximately 36 nm steps. However, 36 nm is the helical repeat length of actin, and the geometry of the previous experiments may have forced the heads to bind to, or halt at, sites on one side of actin that are separated by 36 nm. To observe unconstrained motion, we suspended an actin filament in solution and attached a single myosin V molecule carrying a bead duplex. The duplex moved as a left-handed spiral around the filament, disregarding the right-handed actin helix. Our results indicate a stepwise walking mechanism in which myosin V positions and orients the unbound head such that the head will land at the 11th or 13th actin subunit on the opposing strand of the actin double helix.     

Rotational dynamics of spin-labeled F-actin in the sub-millisecond time range.

The rotational motions of F-actin filaments and myosin heads attached to them have been measured by saturation transfer electron paramagnetic resonance spectroscopy using spin-labels rigidly bound to actin, or to the myosin head region in intact myosin molecules, heavy meromyosin, and subfragment-1. The spin-label attached to F-actin undergoes rotational motion having an effective correlation time of the order of 10^?4 seconds. This cannot be interpreted as rotation of the entire F-actin filament or local rotation of the spin-label, but must represent an internal rotational mode of F-actin, possibly a bending or flexing motion, or a rotation of an actin monomer or a segment of it. The rate of this rotational motion is reduced approximately fourfold by myosin, HMM or S-1; HMM and S-1 are equally effective, on a molar basis, in slowing this rotation and both produce their maximal effect at a ratio of about one molecule of HMM or S-1 per ten actin monomers. With chymotryptic S-1, the effect is partially reversed at higher concentrations. With S-1 prepared with papain in the presence of Mg²⁺, the reversal is smaller, while with HMM or myosin there is no reversal at higher concentrations. Tropomyosin slightly decreases the actin rotational mobility, and the addition of HMM to the actin-tropomyosin complex produces a further slowing. The rotational correlation time for acto-HMM is the same whether the spin-label is on actin or HMM, indicating that the rotation of the head region of HMM when bound to F-actin is controlled by a mode of rotation within the F-actin filaments.     

Myosin head configuration in relaxed insect flight muscle: x-ray modeled resting cross-bridges in a pre-powerstroke state are poised for actin binding

Low-angle x-ray diffraction patterns from relaxed insect flight muscle recorded on the BioCAT beamline at the Argonne APS have been modeled to 6.5 nm resolution (R-factor 9.7%, 65 reflections) using the known myosin head atomic coordinates, a hinge between the motor (catalytic) domain and the light chain-binding (neck) region (lever arm), together with a simulated annealing procedure. The best head conformation angles around the hinge gave a head shape that was close to that typical of relaxed M*ADP*Pi heads, a head shape never before demonstrated in intact muscle. The best packing constrained the eight heads per crown within a compact crown shelf projecting at approximately 90 degrees to the filament axis. The two heads of each myosin molecule assume nonequivalent positions, one head projecting outward while the other curves round the thick filament surface to nose against the proximal neck of the projecting head of the neighboring molecule. The projecting heads immediately suggest a possible cross-bridge cycle. The relaxed projecting head, oriented almost as needed for actin attachment, will attach, then release Pi followed by ADP, as the lever arm with a purely axial change in tilt drives approximately 10 nm of actin filament sliding on the way to the nucleotide-free limit of its working stroke. The overall arrangement appears well designed to support precision cycling for the myogenic oscillatory mode of contraction with its enhanced stretch-activation response used in flight by insects equipped with asynchronous fibrillar flight muscles.     

Differential mobility of skeletal and cardiac tropomyosin on the surface of F-actin.

Polarized phosphorescence from the triplet probe erythrosin-5-iodoacetamide attached to sulfhydryls in rabbit skeletal and cardiac muscle tropomyosin (Tm) was used to measure the microsecond rotational dynamics of these tropomyosins in a complex with F-actin. The steady-state phosphorescence anisotropy of skeletal tropomyosin on F-actin was 0.025 +/- 0.005 at 20 degrees C; the comparable anisotropy for cardiac tropomyosin was 0.010 +/- 0. 003. Measurements of the anisotropy as a function of temperature and solution viscosity (modulated by addition of glycerol) indicated that both skeletal and cardiac tropomyosin undergo complex rotational motions on the surface of F-actin. Models assuming either long axis rotation of a rigid rod or torsional twisting of a flexible rod adequately fit these data; both analyses indicated that cardiac Tm is more mobile than skeletal Tm and that the increased mobility on the surface of F-actin reflected either the rotational motion of a smaller physical unit or the torsional twisting of a less rigid molecule. The binding of myosin heads (S1) to the Tm-F-actin complexes increased the anisotropy to 0.049 +/- 0.004 for skeletal and 0.054 +/- 0.007 for cardiac tropomyosin. The titration of the skeletal tropomyosin-F-actin complex by S1 showed a break at an S1/actin ratio of 0.14; this complex had an anisotropy of 0.040 +/- 0.007, suggesting that one bound head effectively restricted the motion of each skeletal tropomyosin. A similar titration with cardiac tropomyosin reached a plateau at an S1/actin ratio of 0.4, suggesting that 2-3 myosin heads are required to immobilize cardiac Tm. Surface mobility is predicted by structural models of the interaction of tropomyosin with the actin filament while the decrease in tropomyosin mobility upon S1 binding is consistent with current theories for the proposed role of myosin binding in the mechanism of tropomyosin-based regulation of muscle contraction.     

Rotational motions of myosin heads in myofibril studied by phosphorescence anisotropy decay measurements

We studied the rotational Brownian motions of myosin heads, of which the sulfhydryl group was selectively labeled with the triplet probe 5-eosinylmaleimide, in myofibril by using flash-induced phosphorescence anisotropy decay measurements. The anisotropy decay curve under relaxing conditions consisted of a fast (submicrosecond) and a slow (a few microseconds) component and a small constant part as in the synthetic myosin filaments in solution. The decay curves could be analyzed by assuming that a head part, i.e. subfragment 1 (S1), wobbles in the first cone and a part connecting S1 and the tail of a myosin molecule of which the length is shorter than subfragment 2 (S2) wobbles in the second cone (a double-cone model); the semiangles of the former and the latter cones were about 30 degrees and 50 degrees, respectively. The rotational freedom of myosin heads was only slightly restricted by the limited space of the filament lattice in myofibrils. Under rigor conditions, no motion of myosin heads was observed in the 10-microseconds time scale.     

Rotational dynamics of spin-labeled F-actin during activation of myosin S1 ATPase using caged ATP.

The most probable source of force generation in muscle fibers in the rotation of the myosin head when bound to actin. This laboratory has demonstrated that ATP induces microsecond rotational motions of spin-labeled myosin heads bound to actin (Berger, C. L. E. C. Svensson, and D. D. Thomas. 1989. Proc. Natl. Acad. Sci. USA. 86:8753-8757). Our goal is to determine whether the observed ATP-induced rotational motions of actin-bound heads are accompanied by changes in actin rotational motions. We have used saturation transfer electron paramagnetic resonance (ST-EPR) and laser-induced photolysis of caged ATP to monitor changes in the microsecond rotational dynamics of spin-labeled F-actin in the presence of myosin subfragment-1 (S1). A maleimide spin label was attached selectively to cys-374 on actin. In the absence of ATP (with or without caged ATP), the ST-EPR spectrum (corresponding to an effective rotational time of approximately 150 microseconds) was essentially the same as observed for the same spin label bound to cys-707 (SH1) on S1, indicating that S1 is rigidly bound to actin in rigor.(ABSTRACT TRUNCATED AT 250 WORDS)     

Negative staining of myosin molecules

A reproducible method has been developed for the negative staining of myosin molecules. The dimensions of stained molecules are in close agreement with those obtained by metal shadowing. Sharp bends in the tail, indicative of hinge regions, were observed at two positions 44 nm and 76 nm from the head-tail junction. The tail was often ill-defined at the position of the first (44 nm) bend. The bend positions may be sites of proteolytic cleavage that result in the production of long and short myosin subfragment S2. About half the molecules exhibited bending to various degrees at one or both of these positions, but cases where the tail folded back on itself in a 180 degrees bend were comparatively rare (approximately equal to 10%). However, in the absence of EGTA, a large fraction of the molecules (approximately equal to 80%) exhibited 180 degrees bends. A small region, approximately 20 nm long, at the tip of the tail often appears to be significantly different from the rest. The heads are about 19 nm long and roughly pear-shaped. Although sometimes straight, more often they show a pronounced curvature. Both senses of curvature were observed, but those curved in a clockwise manner were the most common, indicating preferential binding of one side of the head to the carbon substrate. An analysis of the different combinations of head shapes in individual molecules indicates that each head can rotate independently around its long axis. No preferred angle of orientation between the two heads in a molecule, or between either head and the tail could be found. Substructure has been observed within the heads.     

Myosin binding protein C positioned to play a key role in regulation of muscle contraction: structure and interactions of domain C1

Myosin binding protein C (MyBP-C) is a thick filament protein involved in the regulation of muscle contraction. Mutations in the gene for MyBP-C are the second most frequent cause of hypertrophic cardiomyopathy. MyBP-C binds to myosin with two binding sites, one at its C-terminus and another at its N-terminus. The N-terminal binding site, consisting of immunoglobulin domains C1 and C2 connected by a flexible linker, interacts with the S2 segment of myosin in a phosphorylation-regulated manner. It is assumed that the function of MyBP-C is to act as a tether that fixes the S1 heads in a resting position and that phosphorylation releases the S1 heads into an active state. Here, we report the structure and binding properties of domain C1. Using a combination of site-directed mutagenesis and NMR interaction experiments, we identified the binding site of domain C1 in the immediate vicinity of the S1-S2 hinge, very close to the light chains. In addition, we identified a zinc binding site on domain C1 in close proximity to the S2 binding site. Its zinc binding affinity (K_d of approximately 10-20 μM) might not be sufficient for a physiological effect. However, the familial hypertrophic cardiomyopathy-related mutation of one of the zinc ligands, glutamine 210 to histidine, will significantly increase the binding affinity, suggesting that this mutation may affect S2 binding. The close proximity of the C1 binding site to the hinge, the light chains and the S1 heads also provides an explanation for recent observations that (a) shorter fragments of MyBP-C unable to act as a tether still have an effect on the actomyosin ATPase and (b) as to why the myosin head positions in phosphorylated wild-type mice and MyBP-C knockout mice are so different: Domain C1 bound to the S1-S2 hinge is able to manipulate S1 head positions, thus influencing force generation without tether. The potentially extensive extra interactions of C1 are expected to keep it in place, while phosphorylation dislodges the C1-C2 linker and domain C2. As a result, the myosin heads would always be attached to a tether that has phosphorylation-dependent length regulation.     

Three-dimensional structure of myosin subfragment-1 from electron microscopy of sectioned crystals

Image analysis of electron micrographs of thin-sectioned myosin subfragment-1 (S1) crystals has been used to determine the structure of the myosin head at approximately 25-A resolution. Previous work established that the unit cell of type I crystals of myosin S1 contains eight molecules arranged with orthorhombic space group symmetry P212121 and provided preliminary information on the size and shape of the myosin head (Winkelmann, D. A., H. Mekeel, and I. Rayment. 1985. J. Mol. Biol. 181:487-501). We have applied a systematic method of data collection by electron microscopy to reconstruct the three-dimensional (3D) structure of the S1 crystal lattice. Electron micrographs of thin sections were recorded at angles of up to 50 degrees by tilting the sections about the two orthogonal unit cell axes in sections cut perpendicular to the three major crystallographic axes. The data from six separate tilt series were merged to form a complete data set for 3D reconstruction. This approach has yielded an electron density map of the unit cell of the S1 crystals of sufficient detail. to delineate the molecular envelope of the myosin head. Myosin S1 has a tadpole-shaped molecular envelope that is very similar in appearance to the pear-shaped myosin heads observed by electron microscopy of rotary-shadowed and negatively stained myosin. The molecule is divided into essentially three morphological domains: a large domain on one end of the molecule corresponding to approximately 60% of the total molecular volume, a smaller central domain of approximately 30% of the volume that is separated from the larger domain by a cleft on one side of the molecule, and the smallest domain corresponding to a thin tail-like region containing approximately 10% of the volume. This molecular organization supports models of force generation by myosin which invoke conformational mobility at interdomain junctions within the head.     

The two actin-binding regions on the myosin heads of cardiac muscle

In the presence of myosin S1 or myosin heads, actin filaments tend to form bundles. The biological meaning of the bundling of actin filaments has been unclear. In this study, we found that the cardiac myosin heads can form the bundles of actin filaments more rapidly than can skeletal S1, as monitored by light scattering and electron microscopy. Moreover, the actin bundles formed by cardiac S1 were found to be more stable against mechanical agitation. The distance between actin filaments in the bundles was approximately 20 nm, which is comparable to the length of a myosin head and two actin molecules. This suggests the direct binding of S1 tails to the adjacent actin filament. The "essential" light chain of cardiac myosin could be cross-linked to the actin molecule in the bundle. When monomeric actin molecules were added to the bundle, the bundles could be dispersed into individual filaments. The three-dimensional structure of the dispersed actin filaments was reconstructed from electron cryo-microscopic images of the single actin filaments dispersed by monomer actin. We were able to demonstrate that cardiac myosin heads bind to two actin molecules: one actin molecule at the conventional actin-binding region and the other at the essential light-chain-binding region. This capability of cardiac myosin heads to bind two actin molecules is discussed in view of lower ATPase activity and slower shortening velocity than those of skeletal ones.     

MgATP binding changes neither the shape nor the flexibility of the heads of single myosin molecules.

The structural mechanism by which myosin heads exert force is unknown. One possibility is that the tight binding of the heads to actin drives them into a force-generating configuration. Another possibility is that the force-generating conformational change is inherent to the myosin heads. In this case the heads would make force by changing their shape according to the species of nucleotide in their active sites, the tight attachment to actin serving only to provide traction. To test this latter possibility, we used negative stain electron microscopy to search for a MgATP-induced shape change in the heads of single myosin molecules. We compared the heads of 10S smooth muscle myosin monomers (wherein MgATP is trapped at the active site) with the MgATP-free heads of 6S monomers. We found that to a resolution of about 2 nm, MgATP binding to the unrestrained myosin head does not drive it to change its shape or its flexibility. This result suggests that the head makes force by virtue of an induced fit to actin.     

Arrangement of the heads of myosin in relaxed thick filaments from tarantula muscle

Thick filaments from leg muscle of tarantula, maintained under relaxing conditions (Mg-ATP and EGTA), were negatively stained and photographed with minimal electron dose. Particles were selected for three-dimensional image reconstruction by general visual appearance and by the strength and symmetry of their optical diffraction patterns, the best of which extend to spacings of 1/5 nm-1. The helical symmetry is such that, on a given layer-line, Bessel function contributions of different orders start to overlap at fairly low resolution and must therefore be separated computationally by combining data from different views. Independent reconstructions agree well and show more detail than previous reconstructions of thick filaments from Limulus and scallop. The strongest feature is a set of four long-pitch right-handed helical ridges (pitch 4 X 43.5 nm) formed by the elongated myosin heads. The long-pitch helices are modulated to give ridges with an axial spacing of 14.5 nm, lying in planes roughly normal to the filament axis and running circumferentially. We suggest that the latter may be formed by the stacking of a subfragment 1 (S1) head from one myosin molecule on an S1 from an axially neighbouring molecule. Internal features in the map indicate an approximate local twofold axis relating the putative heads within a molecule. The heads appear to point in opposite directions along the filament axis and are located very close to the filament backbone. Thus, for the first time, the two heads of the myosin molecule appear to have been visualized in a native thick filament under relaxing conditions.     

Submillisecond rotational dynamics of spin-labeled myosin heads in myofibrils.

The rotational motion of crossbridges, formed when myosin heads bind to actin, is an essential element of most molecular models of muscle contraction. To obtain direct information about this molecular motion, we have performed saturation transfer EPR experiments in which spin labels were selectively and rigidly attached to myosin heads in purified myosin and in glycerinated myofibrils. In synthetic myosin filaments, in the absence of actin, the spectra indicated rapid rotational motion of heads characterized by an effective correlation time of 10 microseconds. By contrast, little or no submillisecond rotational motion was observed when isolated myosin heads (subfragment-1) were attached to glass beads or to F-actin, indicating that the bond between the myosin head and actin is quite rigid on this time scale. A similar immobilization of heads was observed in spin-labeled myofibrils in rigor. Therefore, we conclude that virtually all of the myosin heads in a rigor myofibril are immobilized, apparently owing to attachment of heads to actin. Addition of ATP to myofibrils, either in the presence or absence of 0.1 mM Ca2+, produced spectra similar to those observed for myosin filaments in the absence of actin, indicating rapid submillisecond rotational motion. These results indicate that either (a) most of the myosin heads are detached at any instant in relaxed or activated myofibrils or (b) attached heads bearing the products of ATP hydrolysis rotate as rapidly as detached heads.     

Structure of Limulus telson muscle thick filaments

Computer analysis of electron micrographs of negatively stained thick filaments isolated from the telson levator muscle of the horseshoe crab (Limulus polyphemus) has shown that they have a four-stranded helical structure. The repeating units along each helix have a bent extended shape (measuring approximately 20 nm × 8 nm × 8 nm) and are inclined at an angle of about 30 ° to the helical path. At the resolution of this study, it was difficult to establish the exact size of the surface subunits, but our results are probably more consistent with each unit representing the two heads of a single myosin molecule rather than larger aggregates.     

A mutant heterodimeric myosin with one inactive head generates maximal displacement

Each of the heads of the motor protein myosin II is capable of supporting motion. A previous report showed that double-headed myosin generates twice the displacement of single-headed myosin (Tyska, M.J., D.E. Dupuis, W.H. Guilford, J.B. Patlak, G.S. Waller, K.M. Trybus, D.M. Warshaw, and S. Lowey. 1999. Proc. Natl. Acad. Sci. USA. 96:4402-4407). To determine the role of the second head, we expressed a smooth muscle heterodimeric heavy meromyosin (HMM) with one wild-type head, and the other locked in a weak actin-binding state by introducing a point mutation in switch II (E470A). Homodimeric E470A HMM did not support in vitro motility, and only slowly hydrolyzed MgATP. Optical trap measurements revealed that the heterodimer generated unitary displacements of 10.4 nm, strikingly similar to wild-type HMM (10.2 nm) and approximately twice that of single-headed subfragment-1 (4.4 nm). These data show that a double-headed molecule can achieve a working stroke of approximately 10 nm with only one active head and an inactive weak-binding partner. We propose that the second head optimizes the orientation and/or stabilizes the structure of the motion-generating head, thereby resulting in maximum displacement.     

Electron tomography of swollen rigor fibers of insect flight muscle reveals a short and variably angled S2 domain

Subfragment 2 (S2), the segment that links the two myosin heads to the thick filament backbone, may serve as a swing-out adapter allowing crossbridge access to actin, as the elastic component of crossbridges and as part of a phosphorylation-regulated on-off switch for crossbridges in smooth muscle. Low-salt expansion increases interfilament spacing (from 52 nm to 67 nm) of rigor insect flight muscle fibers and exposes a tethering segment of S2 in many crossbridges. Docking an actoS1 atomic model into EM tomograms of swollen rigor fibers identifies in situ for the first time the location, length and angle assignable to a segment of S2. Correspondence analysis of 1831 38.7 nm crossbridge repeats grouped self-similar forms from which class averages could be computed. The full range of the variability in angles and lengths of exposed S2 was displayed by using class averages for atomic fittings of acto-S1, while S2 was modeled by fitting a length of coiled-coil to unaveraged individual repeats. This hybrid modeling shows that the average length of S2 tethers along the thick filament (except near the tapered ends) is approximately 10 nm, or 16% of S2's total length, with an angular range encompassing 90 degrees axially and 120 degrees azimuthally. The large range of S2 angles indicates that some rigor bridges produce positive force that must be balanced by others producing drag force. The short tethering segment clarifies constraints on the function of S2 in accommodating variable myosin head access to actin. We suggest that the short length of S2 may also favor intermolecular head-head interactions in IFM relaxed thick filaments.