3,4,6-Tri-O-acetyl-2-deoxy-2-[18F]fluoroglucopyranosyl phenylthiosulfonate: a thiol-reactive agent for the chemoselective 18F-glycosylation of peptides

3,4,5-Tri-O-acetyl-2-[18F]fluoro-2-deoxy-d-glucopyranosyl 1-phenylthiosulfonate (Ac3-[18F]FGlc-PTS) was developed as a thiol-reactive labeling reagent for the site-specific 18F-glycosylation of peptides. Taking advantage of highly accessible 1,3,4,6-tetra-O-acetyl-2-deoxy-2-[18F]fluoroglucopyranose, a three-step radiochemical pathway was investigated and optimized, providing Ac3-[18F]FGlc-PTS in a radiochemical yield of about 33% in 90 min (decay-corrected and based on starting [18F]fluoride). Ac3-[18F]FGlc-PTS was reacted with the model pentapeptide CAKAY, confirming chemoselectivity and excellent conjugation yields of >90% under mild reaction conditions. The optimized method was adopted to the 18F-glycosylation of the alphavbeta3-affine peptide c(RGDfC), achieving high conjugation yields (95%, decay-corrected). The alphavbeta3 binding affinity of the glycosylated c(RGDfC) remained uninfluenced as determined by competition binding studies versus 125I-echistatin using both isolated alphavbeta3 and human umbilical vein endothelial cells (Ki = 68 +/- 10 nM (alphavbeta3) versus Ki = 77 +/- 4 nM (HUVEC)). The whole radiosynthetic procedure, including the preparation of the 18F-glycosylating reagent Ac3-[18F]FGlc-PTS, peptide ligation, and final HPLC purification, provided a decay-uncorrected radiochemical yield of 13% after a total synthesis time of 130 min. Ac3-[18F]FGlc-PTS represents a novel 18F-labeling reagent for the mild chemoselective 18F-glycosylation of peptides indicating its potential for the design and development of 18F-labeled bioactive S-glycopeptides suitable to study their pharmacokinetics in vivo by positron emission tomography (PET).     

In vivo evaluation of type 2 transglutaminase contribution to the metastasis formation in melanoma

Three strategies for chemoselective labeling of RGD peptides with ¹⁸F have been compared. Aminooxy [¹⁸F]fluorobenzaldehyde conjugation provided 40 ± 12% decay-corrected radiochemical yield using a fully automated method. An one-pot protocol for ‘click labeling’ of the RGD scaffold with 2-[¹⁸F]fluoroethylazide afforded 47 ± 8% decay-corrected radiochemical yield. Attempted conjugation with 3-[¹⁸F]fluoropropanethiol led to extensive decomposition and was therefore found unsuitable for labeling of the RGD peptide investigated. The results suggest that ‘click labeling’ of RGD peptides provides an attractive alternative to aminooxy aldehyde condensation, however, 2-[¹⁸F]-fluoroethylazide may be too small to allow separation of large ¹⁸F-labeled RGD peptides from their precursors.     

General method for labeling siRNA by click chemistry with fluorine-18 for the purpose of PET imaging

The alkyne-azide Cu(I)-catalyzed Huisgen cycloaddition, a click-type reaction, was used to label a double-stranded oligonucleotide (siRNA) with fluorine-18. An alkyne solid support CPG for the preparation of monostranded oligonucleotides functionalized with alkyne has been developed. Two complementary azide labeling agents (1-(azidomethyl)-4-[(18)F]fluorobenzene) and 1-azido-4-(3-[(18)F]fluoropropoxy)benzene have been produced with 41% and 35% radiochemical yields (decay-corrected), respectively. After annealing with the complementary strand, the siRNA was directly labeled by click chemistry with [(18)F]fluoroazide to produce the [(18)F]-radiolabeled siRNA with excellent radiochemical yield and purity.     

Efficient (18)F-Labeling of Large 37-Amino-Acid pHLIP Peptide Analogues and Their Biological Evaluation

Solid tumors often develop an acidic microenvironment, which plays a critical role in tumor progression and is associated with increased level of invasion and metastasis. The 37-residue pH (low) insertion peptide (pHLIP) is under study as an imaging platform because of its unique ability to insert into cell membranes at a low extracellular pH (pH(e) < 7). Labeling of peptides with [(18)F]-fluorine is usually performed via prosthetic groups using chemoselective coupling reactions. One of the most successful procedures involves the alkyne-azide copper(I) catalyzed cycloaddition (CuAAC). However, none of the known "click" methods have been applied to peptides as large as pHLIP. We designed a novel prosthetic group and extended the use of the CuAAC "click chemistry" for the simple and efficient (18)F-labeling of large peptides. For the evaluation of this labeling approach, a d-amino acid analogue of WT-pHLIP and an l-amino acid control peptide K-pHLIP, both functionalized at the N-terminus with 6-azidohexanoic acid, were used. The novel 6-[(18)F]fluoro-2-ethynylpyridine prosthetic group, was obtained via nucleophilic substitution on the corresponding bromo-precursor after 10 min at 130 °C with a radiochemical yield of 27.5 ± 6.6% (decay corrected) with high radiochemical purity ≥98%. The subsequent Cu(I)-catalyzed "click" reaction with the azido functionalized pHLIP peptides was quantitative within 5 min at 70 °C in a mixture of water and ethanol using Cu-acetate and sodium l-ascorbate. [(18)F]-d-WT-pHLIP and [(18)F]-l-K-pHLIP were obtained with total radiochemical yields of 5-20% after HPLC purification. The total reaction time was 85 min including formulation. In vitro stability tests revealed high stability of the [(18)F]-d-WT-pHLIP in human and mouse plasma after 120 min, with the parent tracer remaining intact at 65% and 85%, respectively. PET imaging and biodistribution studies in LNCaP and PC-3 xenografted mice with the [(18)F]-d-WT-pHLIP and the negative control [(18)F]-l-K-pHLIP revealed pH-dependent tumor retention. This reliable and efficient protocol promises to be useful for the (18)F-labeling of large peptides such as pHLIP and will accelerate the evaluation of numerous [(18)F]-pHLIP analogues as potential PET tracers.     

"Click labeling" with 2-[18f]fluoroethylazide for positron emission tomography

As an effort in the development of more flexible (18)F-labeling chemistry, we report herein on the use of the Cu(I)-catalyzed Huisgen cycloaddition, also known as the "click reaction", to form (18)F-labeled 1,2,3-triazoles. Nucleophilic fluorination of 2-azidoethyl-4-toluenesulfonate followed by distillation provided 2-[(18)F]fluoroethylazide in 55% radiochemical yield (decay-corrected). 2-[(18)F]fluoroethylazide was reacted with a small library of terminal alkynes in the presence of excess Cu(2+)/ascorbate or copper powder. The most reactive alkyne, N-benzylpropynamide provided nearly quantitative incorporation of 2-[(18)F]fluoroethylazide after 15 min at ambient temperature, whereas the majority of the alkyne substrates provided excellent yields of the corresponding (18)F-labeled 1,2,3-triazoles following heating to 80 degrees C. Using the method described, a model peptide was obtained in 92.3 +/- 0.3% (n = 3) radiochemical yield (decay-corrected) after purification by semipreparative HPLC.     

Synthesis of a new heterobifunctional linker, N-[4-(aminooxy)butyl]maleimide, for facile access to a thiol-reactive 18F-labeling agent

A new heterobifunctional linker containing an aldehyde-reactive aminooxy group and a thiol-reactive maleimide group, namely N-[4-(aminooxy)butyl]maleimide, was synthesized as a stable HCl salt by O-alkylation of either N-hydroxyphthalimide or N-(4-monomethoxytrityl)hydroxylamine, followed by N-alkylation of maleimide, in an overall yield of 18% (seven steps) or 29% (five steps), respectively. This heterobifunctional linker allowed a simple and efficient synthesis of a maleimide-containing thiol-reactive (18)F-labeling agent. Thus, N-[4-[(4-[(18)F]fluorobenzylidene)aminooxy]butyl]maleimide (specific activity: approximately 3000 Ci/mmol at end of synthesis) was synthesized in two steps involving the preparation of 4-[(18)F]fluorobenzaldehyde, followed by its aminooxy-aldehyde coupling reaction to the heterobifunctional linker, with an overall radiochemical yield of approximately 35% (decay corrected) within approximately 60 min from end of bombardment. Initial (18)F-labeling experiments were carried out using a thiol-containing tripeptide glutathione (GSH) and a 5'-thiol-functionalized oligodeoxynucleotide (5'-S-ODN) in phosphate-buffered saline (PBS, pH 7.5). After standing at room temperature for 10 min, the (18)F-labeled GSH and 5'-S-ODN were obtained in (18)F-labeling yields of approximately 70% and approximately 5% (decay-corrected), respectively. The heterobifunctional linker is easy to synthesize and provides a facile access to the maleimide-containing thiol-reactive (18)F-labeling agent, which could be advantageously employed in the development of (18)F-labeled biomomolecules for use with positron emission tomography.     

Site-specific labeling of annexin V with F-18 for apoptosis imaging

Annexin V is useful in detecting apoptotic cells by binding to phosphatidylserine (PS) that is exposed on the outer surface of the cell membrane during apoptosis. In this study, we examined the labeling of annexin V-128, a mutated form of annexin V that has a single cysteine residue at the NH 2 terminus, with the thiol-selective reagent (18)F-labeling agent N-[4-[(4-[(18)F]fluorobenzylidene)aminooxy]butyl]maleimide ([(18)F]FBABM). We also examined the cell binding affinity of the (18)F-labeled annexin V-128 ([(18)F]FAN-128). [(18)F]FBABM was synthesized in two-step, one-pot method modified from literature procedure. (Toyokuni et al., Bioconjugate Chem. 2003, 14, 1253-1259). The average yield of [(18)F]FBABM was 23 +/- 4% (n = 4, decay-corrected) and the specific activity was approximately 6000 Ci/mmol. The total synthesis time was approximately 92 min. The critical improvement of this study was identifying and then developing a purification method to remove an impurity N-[4-[(4-dimethylaminobenzylidene)aminooxy]butyl]maleimide 4, whose presence dramatically decreased the yield of protein labeling. Conjugation of [(18)F]FBABM with the thiol-containing annexin V-128 gave [(18)F]FAN-128 in 37 +/- 9% yield (n = 4, decay corrected). Erythrocyte binding assay of [(18)F]FAN-128 showed that this modification of annexin V-128 did not compromise its membrane binding affinity. Thus, an in vivo investigation of [ (18)F]FAN-128 as an apoptosis imaging agent is warranted.     

Synthesis of 4-(5-[18F]fluoromethyl-3-phenylisoxazol-4-yl)benzenesulfonamide, a new [18F]fluorinated analogue of valdecoxib, as a potential radiotracer for imaging cyclooxygenase-2 with positron emission tomography

Fluoroalkyl and fluoroaryl analogues of valdecoxib were found to possess potent inhibitory activities against cyclooxygenase-2 comparable to that of the parent valdecoxib. Among them, the fluoromethyl analogue was chosen for 18F-labeling. Thus, 4-(5-[18F]fluoromethyl-3-phenylisoxazol-4-yl)benzenesulfonamide (approximately 2000 Ci/mmol at end of synthesis) was synthesized by [18F]fluoride-ion displacement of the corresponding tosylate in approximately 40% decay-corrected radiochemical yield within approximately 120 min from end of bombardment.     

Production of [F-18]fluoroannexin for imaging apoptosis with PET

Recombinant human-annexin-V was conjugated with 4-[F-18]fluorobenzoic acid (FBA) via its reaction with the N-hydroxysuccinimidyl ester (FBA-OSu) at pH 8.5. A series of reactions using varying amounts of annexin-V, unlabeled FBA-OSu, and time produced products with different conjugation levels. Products were characterized by mass spectrometry and a cell-binding assay to assess the effect of conjugation. In each case, the conjugated protein was a mixture of proteins with a range of conjugation. Annexin-V could be conjugated with an average of two FBA mole equivalents without decreasing its affinity for red blood cells (K(d) 6-10 nM) with exposed phosphatidylserine. An average conjugation of 7.7 (range 3-13) diminished the binding 3-fold. Large-scale production and purification of [F-18]FBA-OSu from [F-18]fluoride was accomplished within 90 min and in 77% radiochemical yield (decay-corrected to the end of cyclotron bombardment). The conjugation reaction of annexin with [F-18]FBA-OSu was studied with respect to activity level, protein mass, and concentration. Under the most favorable conditions, >25 mCi [F-18]fluoroannexin (FAN) was isolated in 64% yield (decay-corrected for a 22 min conjugation process) from labeling 1.1 mg of annexin-V. A pilot PET imaging study of [F-18]fluoroannexin in normal rats showed high uptake in the renal excretory system and demonstrated sufficient clearance from most other internal organs within 1 h. [F-18]Fluoroannexin should prove useful in imaging targeted apoptosis.     

Preparation of 18F-human serum albumin: a simple and efficient protein labeling method with 18F using a hydrazone-formation method

18F-labeling of proteins and peptides is important for positron emission tomography (PET). Although there are many methods for the labeling of proteins with (18)F, most of these are characterized by complicated procedures or low yields. Here, we report a novel and simple method which includes the preparation of [18F]fluorobenzaldehyde ([18F]FBA) and successive conjugation with hydrazinonicotinic acid-human serum albumin conjugate (HYNIC-HSA) via hydrazone formation. HYNIC-HSA, which can also be used for labeling with (99m)Tc, was prepared via reaction with N-hydroxysuccinimide (NHS) or tetrafluorophenyl (TFP) esters of HYNIC with HSA. No-carrier-added [18F]FBA was prepared by the nucleophilic substitution of [18F]fluoride to 4-trimethylammonium benzaldehyde triflate in the presence of tetrabutylammonium bicarbonate. [18F]FBA was purified by passing ion exchange cartridges (IC-H and QMA) and was adsorbed to a C18 Sep-Pak cartridge. The adsorbed [18F]FBA was then eluted with 50% ethanol. HYNIC-HSA was added to the solution and conjugated with [18F]FBA via hydrazone formation. 18F-HSA was purified with a PD10 column. Biodistribution of 18F-HSA, (99m)Tc-HSA, and [18F]FBA in mice were investigated at 10, 20, and 60 min after intravenous injection. The number of conjugated HYNIC molecules per HSA ranged from 5.2 to 23.2 depending on the reaction conditions. The labeling efficiency of 18F-FBA was 67 +/- 15.7%. The radiochemical purity after purification was over 99%. The conjugation efficiency of HYNIC-HSA with [18F]FBA was between 25% and 90%. The conjugation efficiency was observed to increase with increases in the number of conjugated HYNIC, the HYNIC-HSA concentration, or temperature. 18F-HSA exhibited a biodistribution pattern similar to that of (99m)Tc-HSA while [18F]FBA showed much lower blood activity than that of 18F-HSA and (99m)Tc-HSA. We concluded that 18F-HSA was successfully labeled using a novel method which involves hydrazone formation between [18F]FBA and HYNIC-HSA. This method can be applied to the 18F-labeling of other proteins or peptides.     

1-[3-(2-[18F]fluoropyridin-3-yloxy)propyl]pyrrole-2,5-dione: design, synthesis, and radiosynthesis of a new [18F]fluoropyridine-based maleimide reagent for the labeling of peptides and proteins

FPyME (1-[3-(2-fluoropyridin-3-yloxy)propyl]pyrrole-2,5-dione) was designed as a [(18)F]fluoropyridine-based maleimide reagent for the prosthetic labeling of peptides and proteins via selective conjugation with a thiol (sulfhydryl) function. Its pyridinyl moiety carries the radioactive halogen (fluorine-18) which can be efficiently incorporated via a nucleophilic heteroaromatic substitution, and its maleimido function ensures the efficient alkylation of a free thiol function as borne by cysteine residues. [(18)F]FPyME (HPLC-purified) was prepared in 17-20% non-decay-corrected yield, based on starting [(18)F]fluoride, in 110 min using a three-step radiochemical pathway. The developed procedure involves (1) a high-yield nucleophilic heteroaromatic ortho-radiofluorination on [3-(3-tert-butoxycarbonylaminopropoxy)pyridin-2-yl]trimethylammonium trifluoromethanesulfonate as the fluorine-18 incorporation step, followed by (2) rapid and quantitative TFA-induced removal of the N-Boc-protective group and (3) optimized maleimide formation using N-methoxycarbonylmaleimide. Typically, 4.8-6.7 GBq (130-180 mCi) of radiochemically pure [(18)F]FPyME ([(18)F]-1) could be obtained after semipreparative HPLC in 110 min starting from a cyclotron production batch of 33.3 GBq (900 mCi) of [(18)F]fluoride (overall radiochemical yields, based on starting [(18)F]fluoride: 28-37% decay-corrected). [(18)F]FPyME ([(18)F]-1) was first conjugated with a small model hexapeptide ((N-Ac)KAAAAC), confirming the excellent chemoselectivity of the coupling reaction (CH(2)SH versus CH(2)NH(2)) and then conjugated with two 8-kDa proteins of interest, currently being developed as tumor imaging agents (c-AFIM-0 and c-STxB). Conjugation was achieved in high yields (60-70%, isolated and non-decay-corrected) and used optimized, short-time reaction conditions (a 1/9 (v/v) mixture of DMSO and 0.05 M aq Tris NaCl buffer (pH 7.4) or 0.1 M aq PBS (pH 8), at room temperature for 10 min) and purification conditions (a gel filtration using a Sephadex NAP-10 cartridge or a SuperDex Peptide HR 10/30 column), both compatible with the chemical stability of the proteins and the relatively short half-life of the radioisotope concerned. The whole radiosynthetic procedure, including the preparation of the fluorine-18-labeled reagent, the conjugation with the protein and the final purification took 130-140 min. [(18)F]FPyME ([(18)F]-1) represents a new, valuable, thiol-selective, fluorine-18-labeled reagent for the prosthetic labeling with fluorine-18 of peptides and proteins. Because of its excellent chemoselectivity, [(18)F]FPyME offers an interesting alternative to the use of the nonselective carboxylate and amine-reactive [(18)F]reagents and can therefore advantageously be used for the design and development of new peptide- and protein-based radiopharmaceuticals for PET.     

Synthesis and application of [18F]FDG-maleimidehexyloxime ([18F]FDG-MHO): a [18F]FDG-based prosthetic group for the chemoselective 18F-labeling of peptides and proteins

2-[(18)F]Fluoro-2-deoxy-D-glucose ([(18)F]FDG) as the most important PET radiotracer is available in almost every PET center. However, there are only very few examples using [(18)F]FDG as a building block for the synthesis of (18)F-labeled compounds. The present study describes the use of [(18)F]FDG as a building block for the synthesis of (18)F-labeled peptides and proteins. [(18)F]FDG was converted into [(18)F]FDG-maleimidehexyloxime ([(18)F]FDG-MHO), a novel [(18)F]FDG-based prosthetic group for the mild and thiol group-specific (18)F labeling of peptides and proteins. The reaction was performed at 100 degrees C for 15 min in a sealed vial containing [(18)F]FDG and N-(6-aminoxy-hexyl)maleimide in 80% ethanol. [(18)F]FDG-MHO was obtained in 45-69% radiochemical yield (based upon [(18)F]FDG) after HPLC purification in a total synthesis time of 45 min. Chemoselecetive conjugation of [(18)F]FDG-MHO to thiol groups was investigated by the reaction with the tripeptide glutathione (GSH) and the single cysteine containing protein annexin A5 (anxA5). Radiolabeled annexin A5 ([(18)F]FDG-MHO-anxA5) was obtained in 43-58% radiochemical yield (based upon [(18)F]FDG-MHO, n = 6), and [(18)F]FDG-MHO-anxA5 was used for a pilot small animal PET study to assess in vivo biodistribution and kinetics in a HT-29 murine xenograft model.     

Click chemistry for (18)F-labeling of RGD peptides and microPET imaging of tumor integrin alphavbeta3 expression

The cell adhesion molecule integrin alpha vbeta 3 plays a key role in tumor angiogenesis and metastasis. A series of (18)F-labeled RGD peptides have been developed for PET of integrin expression based on primary amine reactive prosthetic groups. In this study, we report the use of the Cu(I)-catalyzed Huisgen cycloaddition, also known as a click reaction, to label RGD peptides with (18)F by forming 1,2,3-triazoles. Nucleophilic fluorination of a toluenesulfonic alkyne provided (18)F-alkyne in high yield (nondecay-corrected yield: 65.0 +/- 1.9%, starting from the azeotropically dried (18)F-fluoride), which was then reacted with an RGD azide (nondecay-corrected yield: 52.0 +/- 8.3% within 45 min including HPLC purification). The (18)F-labeled peptide was subjected to microPET studies in murine xenograft models. Murine microPET experiments showed good tumor uptake (2.1 +/- 0.4%ID/g at 1 h postinjection (p.i.)) with rapid renal and hepatic clearance of (18)F-fluoro-PEG-triazoles-RGD 2 ( (18)F-FPTA-RGD2) in a subcutaneous U87MG glioblastoma xenograft model (kidney 2.7 +/- 0.8%ID/g; liver 1.9 +/- 0.4%ID/g at 1 h p.i.). Metabolic stability of the newly synthesized tracer was also analyzed (intact tracer ranging from 75% to 99% at 1 h p.i.). In brief, the new tracer (18)F-FPTA-RGD2 was synthesized with high radiochemical yield and high specific activity. This tracer exhibited good tumor-targeting efficacy and relatively good metabolic stability, as well as favorable in vivo pharmacokinetics. This new (18)F labeling method based on click reaction may also be useful for radiolabeling of other biomolecules with azide groups in high yield.     

F-18 Labeling Protocol of Peptides Based on Chemically Orthogonal Strain-Promoted Cycloaddition under Physiologically Friendly Reaction Conditions

We introduce the high-throughput synthesis of various (18)F-labeled peptide tracers by a straightforward (18)F-labeling protocol based on a chemo-orthogonal strain-promoted alkyne azide cycloaddition (SPAAC) using aza-dibenzocyclootyne-substituted peptides as precursors with (18)F-azide synthon to develop peptide based positron emission tomography (PET) molecular imaging probes. The SPAAC reaction and subsequent chemo-orthogonal purification reaction with azide resin proceeded quickly and selectively under physiologically friendly reaction conditions (i.e., toxic chemical reagents-free, aqueous medium, room temperature, and pH ≈7), and provided four (18)F-labeled tumor targetable bioactive peptides such as cyclic Arg-Gly-Asp (cRGD) peptide, bombesin (BBN), c-Met binding peptide (cMBP), and apoptosis targeting peptide (ApoPep) in high radiochemical yields as direct injectable solutions without any HPLC purification and/or formulation processes. In vitro binding assay and in vivo PET molecular imaging study using the (18)F-labeled cRGD peptide also demonstrated a successful application of our (18)F-labeling protocol.     

New F-18 prosthetic group via oxime coupling

A novel fluorine-18 prosthetic ligand, 5-(1,3-dioxolan-2-yl)-2-(2-(2-(2-fluoroethoxy)ethoxy)ethoxy)pyridine [(18)F]2, has been synthesized. The prosthetic ligand is formed in high radiochemical yield (rcy = 71 ± 2%, n = 3) with excellent radiochemical purity (rcp = 99 ± 1%, n = 3) in a short reaction time (10 min). [(18)F]2 is a small, neutral, organic complex, easily synthesized in four steps from a readily available starting material. It can be anchored onto a target molecule containing an aminooxy functional group under acidic conditions by way of an oxime bond. We report herein two examples [(18)F]23 and [(18)F]24, potential imaging agents for β-amyloid plaques, which were labeled with this prosthetic group. This approach could be used for labeling proteins and peptides containing an aminooxy group. Biodistribution in male ICR mice for both oxime labeled complexes [(18)F]23 and [(18)F]24 were compared to that of the known β-amyloid plaque indicator, [(18)F]-AV-45, florbetapir 1. Oximes [(18)F]23 and [(18)F]24 are larger in size and therefore should reduce the blood-brain barrier (BBB) penetration. The brain uptake for oxime [(18)F]23 appeared to be reduced, but still retained some capability to cross the BBB. Oxime [(18)F]24 showed promising results after 2 min post injection (0.48% dose/gram); however, the uptake increased after 30 min post injection (0.92% dose/gram) suggesting an in vivo decomposition/metabolism of compound [(18)F]24. We have demonstrated a general protocol for the fluoride-18 labeling with a new prosthetic ligand [(18)F]2 that is tolerant toward several functional groups and is formed via chemoselective oxime coupling.     

Evaluation of a maleimido derivative of CHX-A' DTPA for site-specific labeling of affibody molecules

Affibody molecules are a new class of small targeting proteins based on a common three-helix bundle structure. Affibody molecules binding a desired target may be selected using phage-display technology. An Affibody molecule Z HER2:342 binding with subnanomolar affinity to the tumor antigen HER2 has recently been developed for radionuclide imaging in vivo. Introduction of a single cysteine into the cysteine-free Affibody scaffold provides a unique thiol group for site-specific labeling of recombinant Affibody molecules. The recently developed maleimido-CHX-A' DTPA was site-specifically conjugated at the C-terminal cysteine of Z HER2:2395-C, a variant of Z HER2:342, providing a homogeneous conjugate with a dissociation constant of 56 pM. The yield of labeling with (111)In was >99% after 10 min at room temperature. In vitro cell tests demonstrated specific binding of (111)In-CHX-A' DTPA-Z 2395-C to HER2-expressing cell-line SKOV-3 and good cellular retention of radioactivity. In normal mice, the conjugate demonstrated rapid clearance from all nonspecific organs except kidney. In mice bearing SKOV-3 xenografts, the tumor uptake of (111)In-CHX-A' DTPA-Z 2395-C was 17.3 +/- 4.8% IA/g and the tumor-to-blood ratio 86 +/- 46 (4 h postinjection). HER2-expressing xenografts were clearly visualized 1 h postinjection. In conclusion, coupling of maleimido-CHX-A' DTPA to cysteine-containing Affibody molecules provides a well-defined uniform conjugate, which can be rapidly labeled at room temperature and provides high-contrast imaging of molecular targets in vivo.     

Synthesis and evaluation of radiolabeled AGI-5198 analogues as candidate radiotracers for imaging mutant IDH1 expression in tumors

Mutations in the metabolic enzyme isocitrate dehydrogenase 1 (IDH1) are commonly found in gliomas. AGI-5198, a potent and selective inhibitor of the mutant IDH1 enzyme, was radiolabeled with radioiodine and fluorine-18. These radiotracers were evaluated as potential probes for imaging mutant IDH1 expression in tumors with positron emission tomography (PET). Radioiodination of AGI-5198 was achieved using a tin precursor in 79?±?6% yield (n?=?9), and ¹⁸F-labeling was accomplished by the Ugi reaction in a decay-corrected radiochemical yield of 2.6?±?1.6% (n?=?5). The inhibitory potency of the analogous nonradioactive compounds against mutant IDH1 (IDH1-R132H) was determined in enzymatic assays. Cell uptake studies using radiolabeled AGI-5198 analogues revealed somewhat higher uptake in IDH1-mutated cells than that in wild-type IDH1 cells. The radiolabeled compounds displayed favorable tissue distribution characteristics in vivo, and good initial uptake in IDH1-mutated tumor xenografts; however, tumor uptake decreased with time. Radioiodinated AGI-5198 exhibited higher tumor-to-background ratios compared with ¹⁸F-labeled AGI-5198; unfortunately, similar results were observed in wild-type IDH1 tumor xenografts as well, indicating lack of selectivity for mutant IDH1 for this tracer. These results suggest that AGI-5198 analogues are not a promising platform for radiotracer development. Nonetheless, insights gained from this study may help in design and optimization of novel chemical scaffolds for developing radiotracers for imaging the mutant IDH1 enzyme.     

Integrated bioprocess for production of human proinsulin C-peptide via heat release of an intracellular heptameric fusion protein

An integrated bioprocess has been developed suitable for production of recombinant peptides using a gene multimerization strategy and site-specific cleavage of the resulting gene product. The process has been used for production in E. coli of the human proinsulin C-peptide via a fusion protein BB-C7 containing seven copies of the 31-residues C-peptide monomer. The fusion protein BB-C7 was expressed at high level, 1.8 g l(-1), as a soluble gene product in the cytoplasm. A heat treatment procedure efficiently released the BB-C7 fusion protein into the culture medium. This step also served as an initial purification step by precipitating the majority of the host cell proteins, resulting in a 70% purity of the BB-C7 fusion protein. Following cationic polyelectrolyte precipitation of the nucleic acids and anion exchange chromatography, native C-peptide monomers were obtained by enzymatic cleavage at flanking arginine residues. The released C-peptide material was further purified by reversed-phase chromatography and size exclusion chromatography. The overall yield of native C-peptide at a purity exceeding 99% was 400 mg l(-1) culture, corresponding to an overall recovery of 56%. The suitability of this process also for the production of other recombinant proteins is discussed.     

18F]Galacto-RGD: synthesis, radiolabeling, metabolic stability, and radiation dose estimates

It has been demonstrated in various murine tumor models that radiolabeled RGD-peptides can be used for noninvasive determination of alphavbeta3 integrin expression. Introduction of sugar moieties improved the pharmacokinetic properties of these peptides and led to tracer with good tumor-to-background ratios. Here we describe the synthesis, radiolabeling, and the metabolic stability of a glycosylated RGD-peptide ([18F]Galacto-RGD) and give first radiation dose estimates for this tracer. The peptide was assembled on a solid support using Fmoc-protocols and cyclized under high dilution conditions. It was conjugated with a sugar amino acid, which can be synthesized via a four-step synthesis starting from pentaacetyl-protected galactose. For radiolabeling of the glycopeptide, 4-nitrophenyl-2-[18F]fluoropropionate was used. This prosthetic group allowed synthesis of [18F]Galacto-RGD with a maximum decay-corrected radiochemical yield of up to 85% and radiochemical purity >98%. The overall radiochemical yield was 29 +/- 5% with a total reaction time including final HPLC preparation of 200 +/- 18 min. The metabolic stability of [18F]Galacto-RGD was determined in mouse blood and liver, kidney, and tumor homogenates 2 h after tracer injection. The average fraction of intact tracer in these organs was approximately 87%, 76%, 69%, and 87%, respectively, indicating high in vivo stability of the radiolabeled glycopeptide. The expected radiation dose to humans after injection of [18F]Galacto-RGD has been estimated on the basis of dynamic PET studies with New Zealand white rabbits. According to the residence times in these animals the effective dose was calculated using the MIRDOSE 3.0 program as 2.2 x 10(-2) mGy/MBq. In conclusion, [18F]Galacto-RGD can be synthesized in high radiochemical yields and radiochemical purity. Despite the time-consuming synthesis of the prosthetic group 185 MBq of [18F]Galacto-RGD, a sufficient dose for patient studies, can be produced starting with approximately 2.2 GBq of [18F]flouride. Moreover, the fast excretion, the suitable metabolic stability and the low estimated radiation dose allow to evaluate this tracer in human studies.     

Synthesis of [¹¹C]uric acid, using [¹¹C]phosgene, as a possible biomarker in PET imaging for diagnosis of gout

The synthesis and in vivo evaluation of (11)C -labeled uric acid ([(11)C]1), a potential imaging agent for the diagnosis of urate-related life-style diseases, was performed using positron emission tomography (PET) image analysis. First, the synthesis of [(11)C]1 was achieved by reacting 5,6-diaminouracil (2) with (11)C-labeled phosgene ([(11)C]COCl(2)). The radiochemical yield of [(11)C]1 was 37±7% (decay-corrected based on [(11)C]COCl(2)) with specific radioactivities of 96-152GBq/μmol at the end of synthesis (n=6). The average time of radiosynthesis from the end of bombardment, including formulation, was about 30min with >98% radiochemical purity. Second, the synthetic approach to [(11)C]1 was optimized using 5,6-diaminouracil sulfate (3) with [(11)C]COCl(2) in the presence of 1,8-bis(dimethylamino)naphthalene. [(11)C]1 was synthesized in 36±6% radiochemical yield, 89-142GBq/μmol of specific radioactivities, and 98% radiochemical purity by this method (n=5). This allowed the synthesis of [(11)C]1 to be carried out repeatedly and the radiochemical yield, specific radioactivities, average time of synthesis, and radiochemical purity of [(11)C]1 were similar to those obtained using 2. PET studies in rats showed large differences in the accumulation of radioligand in the limbs under normal and hyperuricemic conditions. Thus, an efficient and convenient automated synthesis of [(11)C]1 has been developed, and preliminary PET evaluation of [(11)C]1 confirmed the increased accumulation of radioactivity in the limbs of a rat model of hyperuricemia.