Exploitation of plasmid pMRC01 to direct transfer of mobilizable plasmids into commercial lactococcal starter strains

Genetic analysis of the 60.2-kb lactococcal plasmid pMRC01 revealed a 19.6-kb region which includes putative genes for conjugal transfer of the plasmid and a sequence resembling an origin of transfer (oriT). This oriT-like sequence was amplified and cloned on a 312-bp segment into pCI372, allowing the resultant plasmid, pRH001, to be mobilized at a frequency of 3.4 x 10(-4) transconjugants/donor cell from an MG1363 (recA mutant) host containing pMRC01. All of the resultant chloramphenicol-resistant transconjugants contained both pRH001 and genetic determinants responsible for bacteriocin production and immunity of pMRC01. This result is expected, given that transconjugants lacking the lacticin 3147 immunity determinants (on pMRC01) would be killed by bacteriocin produced by the donor cells. Indeed, incorporation of proteinase K in the mating mixture resulted in the isolation of transformants, of which 47% were bacteriocin deficient. Using such an approach, the oriT-containing fragment was exploited to mobilize pRH001 alone to a number of lactococcal hosts. These results demonstrate that oriT of pMRC01 has the potential to be used in the development of mobilizable food-grade vectors for the genetic enhancement of lactococcal starter strains, some of which may be difficult to transform.     

Exploitation of Plasmid pMRC01 To Direct Transfer of Mobilizable Plasmids into Commercial Lactococcal Starter Strains

Genetic analysis of the 60.2-kb lactococcal plasmid pMRC01 revealed a 19.6-kb region which includes putative genes for conjugal transfer of the plasmid and a sequence resembling an origin of transfer (oriT). This oriT-like sequence was amplified and cloned on a 312-bp segment into pCI372, allowing the resultant plasmid, pRH001, to be mobilized at a frequency of 3.4 × 10⁻⁴ transconjugants/donor cell from an MG1363 (recA mutant) host containing pMRC01. All of the resultant chloramphenicol-resistant transconjugants contained both pRH001 and genetic determinants responsible for bacteriocin production and immunity of pMRC01. This result is expected, given that transconjugants lacking the lacticin 3147 immunity determinants (on pMRC01) would be killed by bacteriocin produced by the donor cells. Indeed, incorporation of proteinase K in the mating mixture resulted in the isolation of transformants, of which 47% were bacteriocin deficient. Using such an approach, the oriT-containing fragment was exploited to mobilize pRH001 alone to a number of lactococcal hosts. These results demonstrate that oriT of pMRC01 has the potential to be used in the development of mobilizable food-grade vectors for the genetic enhancement of lactococcal starter strains, some of which may be difficult to transform.     

Variable bacteriocin production in the commercial starter Lactococcus lactis DPC4275 is linked to the formation of the cointegrate plasmid pMRC02

Lactococcus lactis DPC4275 is a bacteriocin-producing transconjugant of the industrial starter strain DPC4268. Strain DPC4275 was generated through conjugal transfer by mating DPC4268 with L. lactis MG1363 containing the 60-kb plasmid pMRC01, which encodes the genetic determinants for the lantibiotic lacticin 3147 and for a phage resistance mechanism of the abortive infection type. The many significant applications of this strain prompted a genetic analysis of its apparently unstable bacteriocin-producing phenotype. Increased levels of lacticin 3147 produced by DPC4275 were associated with the appearance of an 80-kb plasmid, designated pMRC02, which was derived from DNA originating from pMRC01 (60 kb) and a resident DPC4268 proteinase plasmid, pMT60 (60 kb). Indeed, pMRC02 was shown to be derived from the insertion of a 17-kb fragment of pMRC01, encompassing the lacticin 3147 operon, into pMT60. The presence of pMRC02 at a high copy number was found to correlate with increased levels of lacticin 3147 in DPC4275 compared to the wild-type containing pMRC01. Subsequent transfer of pMRC02 into the plasmid-free strain MG1363 by electroporation allowed a direct phenotypic comparison with pMRC01, also studied in the MG1363 background. Plasmid pMRC02 displayed phage resistance similar to that by pMRC01, although it was less potent, as demonstrated by a larger plaque size for phage c2 infection of MG1363(pMRC02). While this locus is flanked by IS946 elements, the sequencing of pMT60-pMRC01 junction sites established that this event was unlikely to be insertion sequence mediated and most probably occurred by homologous recombination followed by deletion of most of pMRC01. This was not a random occurrence, as nine other transconjugants investigated were found to have the same junction sites. Such derivatives of commercial strains producing increased levels of bacteriocin could be exploited as protection cultures for food applications.     

Variable Bacteriocin Production in the Commercial Starter Lactococcus lactis DPC4275 Is Linked to the Formation of the Cointegrate Plasmid pMRC02

Lactococcus lactis DPC4275 is a bacteriocin-producing transconjugant of the industrial starter strain DPC4268. Strain DPC4275 was generated through conjugal transfer by mating DPC4268 with L. lactis MG1363 containing the 60-kb plasmid pMRC01, which encodes the genetic determinants for the lantibiotic lacticin 3147 and for a phage resistance mechanism of the abortive infection type. The many significant applications of this strain prompted a genetic analysis of its apparently unstable bacteriocin-producing phenotype. Increased levels of lacticin 3147 produced by DPC4275 were associated with the appearance of an 80-kb plasmid, designated pMRC02, which was derived from DNA originating from pMRC01 (60 kb) and a resident DPC4268 proteinase plasmid, pMT60 (60 kb). Indeed, pMRC02 was shown to be derived from the insertion of a 17-kb fragment of pMRC01, encompassing the lacticin 3147 operon, into pMT60. The presence of pMRC02 at a high copy number was found to correlate with increased levels of lacticin 3147 in DPC4275 compared to the wild-type containing pMRC01. Subsequent transfer of pMRC02 into the plasmid-free strain MG1363 by electroporation allowed a direct phenotypic comparison with pMRC01, also studied in the MG1363 background. Plasmid pMRC02 displayed phage resistance similar to that by pMRC01, although it was less potent, as demonstrated by a larger plaque size for phage c2 infection of MG1363(pMRC02). While this locus is flanked by IS946 elements, the sequencing of pMT60-pMRC01 junction sites established that this event was unlikely to be insertion sequence mediated and most probably occurred by homologous recombination followed by deletion of most of pMRC01. This was not a random occurrence, as nine other transconjugants investigated were found to have the same junction sites. Such derivatives of commercial strains producing increased levels of bacteriocin could be exploited as protection cultures for food applications.     

Sequence and analysis of the 60 kb conjugative, bacteriocin-producing plasmid pMRC01 from Lactococcus lactis DPC3147

The complete sequence of pMRC01, a large conjugative plasmid from Lactococcus lactis ssp. lactis DPC3147, has been determined. Using a shotgun sequencing approach, the 60 232 bp plasmid sequence was obtained by the assembly of 1056 underlying sequences (sevenfold average redundancy). Sixty-four open reading frames (ORFs) were identified. Analysis of the gene organization of pMRC01 suggests that the plasmid can be divided into three functional domains, with each approximately 20 kb region separated by insertion sequence (IS) elements. The three regions are (i) the conjugative transfer region, including a 16-gene Tra (transfer) operon; (ii) the bacteriocin production region, including an operon responsible for the synthesis of the novel bacteriocin lacticin 3147; and (iii) the phage resistance and plasmid replication region of the plasmid. The complete sequence of pMRC01 provides important information about these industrially relevant phenotypes and gives insight into the structure, function and evolution of large Gram-positive conjugative plasmids in general. The completely sequenced pMRC01 plasmid should also provide a useful framework for the design of novel plasmids to be incorporated into starter strain improvement programmes for the dairy industry.     

Use of lacticin 481 to facilitate delivery of the bacteriophage resistance plasmid, pCBG104 to cheese starters

AIMS: Use of lacticin 481 to facilitate the conjugal transfer of the bacteriophage resistance plasmid pCBG104 to various starter cultures. METHODS AND RESULTS: A raw milk isolate of Lactococcus was found to harbour determinants for lacticin 481 production and immunity and phage resistance on a plasmid designated pCBG104. The lacticin 481 was successfully used to mobilize the phage resistance determinant to a variety of cheese starters enabling the formation of highly phage resistant starters. In addition, it facilitated the stacking of a number of phage resistance genes, namely a type I restriction modification system, a phage abortive infection system and a phage adsorption blocking system in a single Lactococcus strain without the use of recombinant techniques. The transconjugants were all shown to produce lacticin 481 and to contain the entire 481 operon. Subsequently one transconjugant was selected and successfully used for large-scale cheddar cheese manufacture. CONCLUSIONS: Lacticin 481 could be used as a food-grade selectable marker to facilitate the introduction of advantageous traits to starter cultures for industrial food fermentations. SIGNIFICANCE AND IMAPCT OF THE STUDY: Food-grade selectable markers greatly facilitate the introduction of various advantageous traits to starter cultures for industrial food fermentation. Indeed self-cloning which is becoming increasingly important for strain improvement has a requirement for the identification and demonstration of the utility of tools such as lacticin 481.     

In vivo genetic exchange of a functional domain from a type II A methylase between lactococcal plasmid pTR2030 and a virulent bacteriophage.

The conjugative plasmid pTR2030 confers bacteriophage resistance to lactococci by two independent mechanisms, an abortive infection mechanism (Hsp+) and a restriction and modification system (R+/M+). pTR2030 transconjugants of lactococcal strains are used in the dairy industry to prolong the usefulness of mesophilic starter cultures. One bacteriophage which has emerged against a pTR2030 transconjugant is not susceptible to either of the two defense systems encoded by the plasmid. Phage nck202.50 (phi 50) is completely resistant to restriction by pTR2030. A region of homology between pTR2030 and phi 50 was subcloned, physically mapped, and sequenced. A region of 1,273 bp was identical in both plasmid and phage, suggesting that the fragment had recently been transferred between the two genomes. Sequence analysis confirmed that the transferred region encoded greater than 55% of the amino domain of the structural gene for a type II methylase designated LlaI. The LlaI gene is 1,869 bp in length and shows organizational similarities to the type II A methylase FokI. In addition to the amino domain, upstream sequences, possibly containing the expression signals, were present on the phage genome. The phage phi 50 fragment containing the methylase amino domain, designated LlaPI, when cloned onto the shuttle vector pSA3 was capable of modifying another phage genome in trans. This is the first report of the genetic exchange between a bacterium and a phage which confers a selective advantage on the phage. Definition of the LlaI system on pTR2030 provides the first evidence that type II systems contribute to restriction and modification phenotypes during host-dependent replication of phages in lactococci.     

Increasing phage resistance of cheese starters : a case study using Lactococcus lactis DPC4268

This study serves as an example of strategies used to increase the phage resistance of an important Irish Cheddar cheese starter, Lactococcus lactis DPC4268. It describes the emergence and persistence of a lytic bacteriophage, 4268, that has a relatively large burst size and exhibits no homology to the most common phage types encountered in Irish cheese plants. Inherent difficulties were encountered that prevented the effective introduction of conjugative phage-resistance plasmids pNP40 and pMRC01 to strain DPC4268. In fact, pNP40-associated Abi systems were naturally present in six of 19 starters. Control of phage 4268 was eventually achieved by generating a mutant of DPC4268, which was subsequently used for cheese manufacture.     

Cloning and DNA sequence analysis of two abortive infection phage resistance determinants from the lactococcal plasmid pNP40.

The lactococcal plasmid pNP40, from Lactococcus lactis subsp. lactis biovar diacetylactis DRC3, confers complete resistance to the prolate-headed phage phi c2 and the small isometric-headed phage phi 712 in L. lactis subsp. lactis MG1614. A 6.0-kb NcoI fragment of pNP40 cloned in the lactococcal Escherichia coli shuttle vector pAM401 was found to confer partial resistance to phi 712. Subcloning and deletion analysis of the recombinant plasmid pPG01 defined a 2.5-kb ScaIHpaI fragment as conferring phage insensitivity. Sequence analysis of this region confirmed the presence of two overlapping open reading frames (ORFs). Further subcloning of pNP40 to characterize the resistance determinant active against phi c2 identified a 5.6-kb EcoRV fragment of pNP40 which, when cloned in pAM401, conferred partial resistance to both phi c2 and phi 712. Subcloning and deletion analysis of the recombinant plasmid pCG1 defined a 3.7-kb EcoRV-XbaI fragment as encoding phage insensitivity. DNA sequence analysis of this region revealed the presence of a single complete ORF. The introduction of a frameshift mutation at the unique BglII site within this ORF disrupted the phage resistance phenotype, confirming that this ORF is responsible for the observed phage insensitivity. The mechanisms encoded by pPG01 and pCG1 in L. lactis subsp. lactis MG1614 conformed to the criteria defining abortive infection and were designated AbiE and AbiF, respectively. Analysis of the phage DNA content of phi 712-infected hosts containing AbiF demonstrated that it inhibited the rate of phage DNA replication, while AbiE had little effect on phage DNA replication, suggesting a later target of inhibition. The predicted protein product of abiF shows significant homology to the products of two other lactococcal abortive infection genes, abiD and abiD1.     

The ability of the plasmid-encoded restriction and modification system LlaBIII to protect Lactococcus lactis against bacteriophages

AIMS: To investigate the potential of the plasmid-encoded restriction and modification (R/M) system LlaBIII to protect Lactococcua lactis against bacteriophages during milk fermentations. METHODS AND RESULTS: The R/M system LlaBIII on plasmid pJW566 was cloned with a chloramphenicol cassette, resulting in plasmid pJK1. When introduced into L. lactis strains, pJK1 conferred increased phage resistance against the three most common lactococcal phage species 936, c2, and P335 and three unclassified industrial phages. The growth of the strains in RSM was not affected by the presence of plasmid pJK1. CONCLUSIONS: The plasmid-encoded R/M system LlaBIII has great ability to protect L. lactis strains against bacteriophages in milk fermentations. SIGNIFICANCE AND IMPACT OF THE STUDY: This study evaluates the ability of the LlaBIII R/M system to function as a phage defence mechanism which is an essential step prior to considering utilizing it for improving starter cultures.     

Conjugal transfer of plasmid-borne bacteriocin production in Enterococcus faecalis 226 NWC

Enterococcus faecalis 226 NWC, isolated from natural whey cultures utilized as starter in water-buffalo Mozzarella cheese manufacture, produces a bacteriocin, designated Enterocin 226 NWC, which is inhibitory to Listeria monocytogenes. Plasmid analysis of E. faecalis 226 NWC showed a single 5.2-kb plasmid, pEF226. In conjugation experiments, pEF226 was transferred into a plasmid-free strain of E. faecalis JH2-2. The transfer required direct cell-to-cell contact and was not inhibited by DNase. The identity of conjugation was confirmed by digestion with SmaI restriction endonuclease and subsequent pulsed-field gel electrophoresis (PFGE) of the genomic DNA of E. faecalis 226, E. faecalis JH2-2 and of the isolates after the mating. The data indicate that the ability of E. faecalis 226 NWC to produce the bacteriocin is linked to the 5.2-kb conjugative plasmid pEF226.     

Developing applications for lactococcal bacteriocins

While much of the applied research carried out to date with bacteriocins has concerned nisin, lactococci produce other bacteriocins with economic potential. An example is the two component bacteriocin lacticin 3147, which is active over a wide pH range and has a broad spectrum of activity against Gram-positive bacteria. Since the genetic determinants for lacticin 3147 are encoded on a large self-transmissible plasmid, the bacteriocin genes may be conveniently transferred to different lactococcal starters. The resulting food-grade strains can then be used to make a significant impact on the safety and quality of a variety of fermented foods, through the inhibition of undesirable microflora. The bacteriocin is heat stable so it can also be used as an ingredient in a powdered form such as a spray-dried fermentate. Given the observation that lacticin 3147 is effective at physiological pH, there is also considerable potential for biomedical applications. Field trials have demonstrat ed its efficacy in the prevention of mastitis infections in dairy cows. In contrast to lacticin 3147, the lactococcin bacteriocins A, B and M have a narrow spectrum of activity limited to lactococci. Strains which produce these inhibitors can be exploited in the acceleration of cheese ripening by assisting the premature lysis of starter cultures.     

Proteinase PI and lactococcin A genes are located on the largest plasmid in Lactococcus lactis subsp. lactis bv. diacetylactis S50

Lactococcus lactis subsp. lactis bv. diacetylactis S50 produces a lactococcin A-like bacteriocin named bacteriocin S50, and cell envelope-associated PI-type proteinase activity. This strain harbours 3 small size plasmids: pS6 (6.3 kb), pS7a (7.31 kb), and pS7b (7.27 kb). Plasmid curing using a combination of novobiocin treatment (10 microg.mL-1) and sublethal temperature (40 degrees C) resulted in a very low yield (0.17%) of Prt-, Bac-, Bacs derivatives, which retained all 3 small size resident plasmids. Pulsed-field gel electrophoresis of DNA isolated from the strain S50 and cured derivatives in combination with restriction enzyme analysis and DNA-DNA hybridization revealed that S50 contains 2 additional large plasmids: pS140 (140 kb) and pS80 (80 kb). Conjugation experiments using strain S50 as a donor and various lactococcal recipients resulted in Prt+, Bac+, Bacr transconjugants. Analysis of these transconjugants strongly indicated that plasmid pS140 harbours the prt and bac genes encoding proteinase and bacteriocin production, and immunity to bacteriocin, since each Prt+, Bac+, Bacr tranconjugant contained pS140. Accordingly, none of the Prt-,Bac-, Bacs transconjugants contained this plasmid. pS140 was a self-transmissible conjugative plasmid regardless of the host lactococcal recipient used in the test. Frequency of conjugation of plasmid pS140 did not depend on either the donor or recipient strain.     

Overproduction of wild-type and bioengineered derivatives of the lantibiotic lacticin 3147

Lacticin 3147 is a broad-spectrum two-peptide lantibiotic whose genetic determinants are located on two divergent operons on the lactococcal plasmid pMRC01. Here we introduce each of 14 subclones, containing different combinations of lacticin 3147 genes, into MG1363 (pMRC01) and determine that a number of them can facilitate overproduction of the lantibiotic. Based on these studies it is apparent that while the provision of additional copies of genes encoding the biosynthetic/production machinery and the regulator LtnR is a requirement for high-level overproduction, the presence of additional copies of the structural genes (i.e., ltnA1A2) is not.     

Sequence analysis of the lactococcal plasmid pNP40: a mobile replicon for coping with environmental hazards

The conjugative lactococcal plasmid pNP40, identified in Lactococcus lactis subsp. diacetylactis DRC3, possesses a potent complement of bacteriophage resistance systems, which has stimulated its application as a fitness-improving, food-grade genetic element for industrial starter cultures. The complete sequence of this plasmid allowed the mapping of previously known functions including replication, conjugation, bacteriocin resistance, heavy metal tolerance, and bacteriophage resistance. In addition, functions for cold shock adaptation and DNA damage repair were identified, further confirming pNP40's contribution to environmental stress protection. A plasmid cointegration event appears to have been part of the evolution of pNP40, resulting in a "stockpiling" of bacteriophage resistance systems.     

Conjugal Transfer of Bacteriophage Resistance Determinants on pTR2030 into Streptococcus cremoris Strains

Agar surface conjugal matings were used to introduce heat-sensitive phage resistance (Hsp⁺) determinants carried on the conjugal plasmid pTR2030 into Streptococcus cremoris KH, HP, 924, and TDM1. Lactose-fermenting (Lac⁺) transconjugants were selected from matings of Lac⁻ variants of S. cremoris KH, HP, 924, and TDM1 with Streptococcus lactis ME2 or a high-frequency donor, S. lactis T-EK1 (pTR1040, Lac⁺; pTR2030, Hsp⁺). For all of the S. cremoris strains examined, select Lac⁺ transconjugants were completely resistant to plaquing by their homologous lytic phages. In all cases the plaquing efficiencies were less than 10⁻⁹. Acquisition of a 30-megadalton plasmid (pTR2030) in the S. cremoris phage-resistant transconjugants was demonstrated by direct plasmid analysis, by hybridization with ³²P-labeled probes, or by conjugal transfer of pTR2030 out of the phage-resistant transconjugants into a plasmid-cured recipient, S. lactis LM2302. Acid production, coagulation ability, and proteolytic activity of phage-resistant transconjugants in milk were comparable to those of their phage-sensitive parents. Further, S. cremoris phage-resistant transconjugants were not attacked by phage in starter culture activity tests, which included a 40°C incubation period. The results demonstrated that phage resistance determinants on pTR2030 could be conjugally transferred to a variety of S. cremoris strains and confer resistance to phage under conditions encountered during cheese manufacture. Phage-resistant transconjugants of S. cremoris M43 and HP were also constructed without the use of antiblotic markers to select conjugal recipients from mating mixtures.     

A food-grade approach for functional analysis and modification of native plasmids in Lactococcus lactis

While plasmids from lactic acid bacteria possess many traits that are of industrial value, their exploitation is often frustrated by an inability to conduct food-grade engineering of native plasmids or to readily screen for their transfer. Here we describe a system that uses a RepA(+) temperature-sensitive helper plasmid and a RepA(-) cloning vector to overcome these problems while maintaining the food-grade status of the native plasmid. This strategy was used to precisely delete ltnA1 alone, or in conjunction with ltnA2 (encoding the structural proteins of the lantibiotic lacticin 3147), from the native 60.2-kb plasmid pMRC01 and to select for the transfer of pMRC01 between Lactococcus lactis strains.     

Evidence for the conjugal transfer of the broad host range plasmid pIP501 into strains of Lactobacillus helveticus

The conjugative broad host range plasmid pIP501 was transferred from Streptococcus faecalis to a series of strains of lactic streptococci used commercially as dairy starter cultures. With these transconjugants as donors the plasmid was exconjugated to two strains of Lactobacillus helveticus and a commercially used strain of Strep. thermophilus. There was evidence that the plasmid could transfer between isogenic derivatives of one of the strains of Lact. helveticus. Transfer from Lact. helveticus to Strep. faecalis was also detected but at a low frequency. There was no evidence for the conjugal transfer of plasmid pIP501 into a strain of Lact. bulgaricus by exconjugation from either lactic streptococci or Lactobacillus sp.     

Evidence for the conjugal transfer of the broad host range plasmid pIP501 into strains of Lactobacillus helveticus

The conjugative broad host range plasmid pIP501 was transferred from Streptococcus faecalis to a series of strains of lactic streptococci used commercially as dairy starter cultures. With these transconjugants as donors the plasmid was exconjugated to two strains of Lactobacillus helveticus and a commercially used strain of Strep, thermophilus. There was evidence that the plasmid could transfer between isogenic derivatives of one of the strains of Lact. helveticus. Transfer from Lact. helveticus to Strep. faecalis was also detected but at a low frequency. There was no evidence for the conjugal transfer of plasmid pIP501 into a strain of Lact. bulgaricus by exconjugation from either lactic streptococci or Lactobacillus sp.     

Streptococcus cremoris M12R transconjugants carrying the conjugal plasmid pTR2030 are insensitive to attack by lytic bacteriophages

Conjugal transfer of lactose-fermenting ability (Lac+), nisin resistance (Nisr), and phage resistance (Hsp+) was demonstrated in matings between Streptococcus lactis ME2 (donor) and Streptococcus cremoris M43a (recipient), a derivative of M12R. Transconjugants were detected by transfer of Lac+ and were found to exhibit Nisr and harbor a 40-megadalton plasmid (pTR1040). Fifty-six percent of Lac+ transconjugants were resistant to the S. cremoris M12R lytic phage. Efficiency of plaquing for phage m12r . M12 on a phage-resistant transconjugant, T2r-M43a, was less than 4.3 X 10(-10). Five additional phages which were virulent for S. cremoris M12R and isolated from industrial sources failed to plaque on S. cremoris T2r-M43a. Mating experiments with T2r-M43a revealed that phage resistance was accompanied by high-frequency conjugation ability (Tra+) and the appearance of both pTR1040 and pTR2030 encoding Lac+ Nisr and Tra+ Hsp+, respectively, in transconjugants of S. lactis LM2302. Phage-sensitive Lac+ transconjugants of S. cremoris M43a (T2s-M43a) showed no conjugal ability. These observations confirmed that pTR2030 was present and responsible for the phage resistance and conjugal ability exhibited by the S. cremoris transconjugant T2r-M43a. Unlike the S. lactis LM2302 transconjugant carrying pTR2030, resistance of T2r-M43a to phage was not affected at high temperatures (35 to 40 degrees C) or destabilized in repeated transfers through a starter culture activity test. These results demonstrated that phage resistance conferred by pTR2030 in the S. cremoris transconjugant was effective against industrially significant phages under fermentation conditions normally encountered during cheese manufacture.