Pedaling power and speed production vs. technical factors and track difficulty in bicycle motocross cycling

Mateo, M, Blasco-Lafarga, C, and Zabala, M. Pedaling power and speed production vs. technical factors and track difficulty in BMX cycling. J Strength Cond Res 25(12): 3248-3256, 2011-This article analyzes whether there is a determined profile in the production of cyclic and acyclic periods in relation to the phases of a bicycle motocross (BMX) race and whether this profile is related to the variables, Difficulty of track and Techniques used. After an initial test for determining maximum pedaling power (Pmax), 9 athletes belonging to the Spanish national team completed 3 series of 3 different types of races: (a) Complete track without pedaling; (b) Track, pedaling only at the gate start; and (c) track with free pedaling. The triple test was carried out over 3 days and on different level tracks: (a) high difficulty (HD), (b) medium difficulty (MD), and (c) low difficulty (LD). Our results show that average peak power applied in the BMX race was 85.21 ± 2.15% Pmax, coming down to 73.02 ± 18.38% at the gate start and to 51.37 ± 15.84% on the first straight. On the other hand, mean power (MP) in the BMX race is 33.79 ± 8.60% MPmax, with statistically significant differences in relation to the difficulty of the track (p < 0.000; 0.009; higher in the easiest). The mean velocity developed is 34.21 ± 1.0 km·h with significant differences (p < 0.000) in relation to the difficulty of the track. Acyclic efforts accounted for 86.3%, and cyclic efforts accounted for the remaining 16.7% of the overall performance in the race, with differences in relation to the difficulty of the track (p ≤ 0.003). Both power profile and performance (measured as velocity) are dependent on the phases and techniques of the race and are significantly affected by the level of difficulty of the track. The greater the technical level of the track, the lesser the possibility of developing cyclic power and vice versa.     

Effects of horizontal shoulder abduction and adduction on the activity and strength of the scapular protractors

Increased activity of the serratus anterior (SA) muscle combined with decreased activity of the pectoralis major (PM) muscle during scapular protraction exercise is a widely used method for selective strengthening of the former muscle. However, the role played by the PM during maximal scapular protraction remains unclear. The objective of our study was to investigate the effects of horizontal shoulder abduction (decreasing PM activity) and adduction (increasing activity) on the strength and activity of the scapular protractors (the SA and PM) during maximal protraction. Twenty-nine healthy males performed maximal scapular protraction combined with horizontal shoulder abduction or adduction. The strength and activity of the PM and SA decreased significantly (both p < 0.01) during maximal scapular protraction combined with horizontal shoulder abduction, compared with maximal scapular protraction alone, but increased significantly (both p < 0.01) when maximal scapular protraction was combined with horizontal shoulder adduction. We thus conclude that the PM stabilizes the activated SA during maximal scapular protraction, which effectively increases SA activity and scapular protraction strength in the serratus punch posture.     

Effects of different movement directions on electromyography recorded from the shoulder muscles while passing the target positions

PurposeWe compared electromyography (EMG) recorded from the shoulder joint muscles in the same position for different movement directions.MethodsFifteen healthy subjects participated. They performed shoulder elevation from 0° to 120°, shoulder depression from 120° to 0°, shoulder horizontal adduction from ?15° to 105°, and shoulder horizontal abduction from 105° to ?15°. The target positions were 90° shoulder elevation in the 0°, 30°, 60°, and 90° planes (0°, 30°, 60°, and 90° positions). EMG signals were recorded from the supraspinatus (SSP) muscle by fine-wire electrodes. EMG signals from the infraspinatus (ISP), anterior deltoid, middle deltoid, and posterior deltoid muscles were recorded using active surface electrodes.ResultsDuring elevation and horizontal abduction, the SSP showed significantly higher activity than that shown during depression and during horizontal adduction in the 0°, 30°, and 60° positions. During elevation, the ISP showed significantly higher activity than during depression and during horizontal adduction in the 90° position. During horizontal abduction, the ISP showed significantly higher activity than during depression in the 90° position.ConclusionsWhen the movement tasks were performed in different movement directions at the same speed, each muscle showed characteristic activity.     

Clinical and neuropathological study about the neurotization of the suprascapular nerve in obstetric brachial plexus lesions

Background

The lack of recovery of active external rotation of the shoulder is an important problem in children suffering from brachial plexus lesions involving the suprascapular nerve. The accessory nerve neurotization to the suprascapular nerve is a standard procedure, performed to improve shoulder motion in patients with brachial plexus palsy.

Methods

We operated on 65 patients with obstetric brachial plexus palsy (OBPP), aged 5-35 months (average: 19 months). We assessed the recovery of passive and active external rotation with the arm in abduction and in adduction. We also looked at the influence of the restoration of the muscular balance between the internal and the external rotators on the development of a gleno-humeral joint dysplasia. Intraoperatively, suprascapular nerve samples were taken from 13 patients and were analyzed histologically.

Results

Most patients (71.5%) showed good recovery of the active external rotation in abduction (60°-90°). Better results were obtained for the external rotation with the arm in abduction compared to adduction, and for patients having only undergone the neurotization procedure compared to patients having had complete plexus reconstruction. The neurotization operation has a positive influence on the glenohumeral joint: 7 patients with clinical signs of dysplasia before the reconstructive operation did not show any sign of dysplasia in the postoperative follow-up.

Conclusion

The neurotization procedure helps to recover the active external rotation in the shoulder joint and has a good prevention influence on the dysplasia in our sample. The nerve quality measured using histopathology also seems to have a positive impact on the clinical results.     

Generating dynamic simulations of movement using computed muscle control

Computation of muscle excitation patterns that produce coordinated movements of muscle-actuated dynamic models is an important and challenging problem. Using dynamic optimization to compute excitation patterns comes at a large computational cost, which has limited the use of muscle-actuated simulations. This paper introduces a new algorithm, which we call computed muscle control, that uses static optimization along with feedforward and feedback controls to drive the kinematic trajectory of a musculoskeletal model toward a set of desired kinematics. We illustrate the algorithm by computing a set of muscle excitations that drive a 30-muscle, 3-degree-of-freedom model of pedaling to track measured pedaling kinematics and forces. Only 10 min of computer time were required to compute muscle excitations that reproduced the measured pedaling dynamics, which is over two orders of magnitude faster than conventional dynamic optimization techniques. Simulated kinematics were within 1 degrees of experimental values, simulated pedal forces were within one standard deviation of measured pedal forces for nearly all of the crank cycle, and computed muscle excitations were similar in timing to measured electromyographic patterns. The speed and accuracy of this new algorithm improves the feasibility of using detailed musculoskeletal models to simulate and analyze movement.     

Determinants of metabolic cost during submaximal cycling.

The metabolic cost of producing submaximal cycling power has been reported to vary with pedaling rate. Pedaling rate, however, governs two physiological phenomena known to influence metabolic cost and efficiency: muscle shortening velocity and the frequency of muscle activation and relaxation. The purpose of this investigation was to determine the relative influence of those two phenomena on metabolic cost during submaximal cycling. Nine trained male cyclists performed submaximal cycling at power outputs intended to elicit 30, 60, and 90% of their individual lactate threshold at four pedaling rates (40, 60, 80, 100 rpm) with three different crank lengths (145, 170, and 195 mm). The combination of four pedaling rates and three crank lengths produced 12 pedal speeds ranging from 0.61 to 2.04 m/s. Metabolic cost was determined by indirect calorimetery, and power output and pedaling rate were recorded. A stepwise multiple linear regression procedure selected mechanical power output, pedal speed, and pedal speed squared as the main determinants of metabolic cost (R(2) = 0.99 +/- 0.01). Neither pedaling rate nor crank length significantly contributed to the regression model. The cost of unloaded cycling and delta efficiency were 150 metabolic watts and 24.7%, respectively, when data from all crank lengths and pedal speeds were included in a regression. Those values increased with increasing pedal speed and ranged from a low of 73 +/- 7 metabolic watts and 22.1 +/- 0.3% (145-mm cranks, 40 rpm) to a high of 297 +/- 23 metabolic watts and 26.6 +/- 0.7% (195-mm cranks, 100 rpm). These results suggest that mechanical power output and pedal speed, a marker for muscle shortening velocity, are the main determinants of metabolic cost during submaximal cycling, whereas pedaling rate (i.e., activation-relaxation rate) does not significantly contribute to metabolic cost.     

Muscles within muscles: Coordination of 19 muscle segments within three shoulder muscles during isometric motor tasks.

The aim of the present study was to determine how the intra-muscular segments of three shoulder muscles were coordinated to produce isometric force impulses around the shoulder joint and how muscle segment coordination was influenced by changes in movement direction, mechanical line of action and moment arm (ma). Twenty male subjects (mean age 22 years; range 18-30 years) with no known history of shoulder pathologies, volunteered to participate in this experiment. Utilising an electromyographic technique, the timing and intensity of contraction within 19 muscle segments of three superficial shoulder muscles (Pectoralis Major, Deltoid and Latissimus Dorsi) were studied and compared during the production of rapid (e.g. approximately 400ms time to peak) isometric force impulses in four different movement directions of the shoulder joint (flexion, extension, abduction and adduction). The results of this investigation have suggested that the timing and intensity of each muscle segment's activation was coordinated across muscles and influenced by the muscle segment's moment arm and its mechanical line of action in relation to the intended direction of shoulder movement (e.g. flexion, extension, abduction or adduction). There was also evidence that motor unit task groups were formed for individual motor tasks which comprise motor units from both adjacent and distant muscles. It was also confirmed that for any particular motor task, individual muscle segments can be functionally classified as prime mover, synergist or antagonist - classifications which are flexible from one movement to the next.     

The association between negative muscle work and pedaling rate.

The objective of this research was to use a pedal force decomposition approach to quantify the amount of negative muscular crank torque generated by a group of competitive cyclists across a range of pedaling rates. We hypothesized that negative muscular crank torque increases at high pedaling rates as a result of the activation dynamics associated with muscle force development and the need for movement control, and that there is a correlation between negative muscular crank torque and pedaling rate. To test this hypothesis, data were collected during 60, 75, 90, 105 and 120 revolutions per minute (rpm) pedaling at a power output of 260 W. The statistical analysis supported our hypothesis. A significant pedaling rate effect was detected in the average negative muscular crank torque with all pedaling rates significantly different from each other (p < 0.05). There was no negative muscular crank torque generated at 60 rpm and negligible amounts at 75 and 90 rpm. But substantial negative muscular crank torque was generated at the two highest pedaling rates (105 and 120 rpm) that increased with increasing pedaling rates. This result suggested that there is a correlation between negative muscle work and the pedaling rates preferred by cyclists (near 90 rpm), and that the cyclists' ability to effectively accelerate the crank with the working muscles diminishes at high pedaling rates.     

Static optimization underestimates antagonist muscle activity at the glenohumeral joint: A musculoskeletal modeling study

Static optimization is commonly employed in musculoskeletal modeling to estimate muscle and joint loading; however, the ability of this approach to predict antagonist muscle activity at the shoulder is poorly understood. Antagonist muscles, which contribute negatively to a net joint moment, are known to be important for maintaining glenohumeral joint stability. This study aimed to compare muscle and joint force predictions from a subject-specific neuromusculoskeletal model of the shoulder driven entirely by measured muscle electromyography (EMG) data with those from a musculoskeletal model employing static optimization. Four healthy adults performed six sub-maximal upper-limb contractions including shoulder abduction, adduction, flexion, extension, internal rotation and external rotation. EMG data were simultaneously measured from 16 shoulder muscles using surface and intramuscular electrodes, and joint motion evaluated using video motion analysis. Muscle and joint forces were calculated using both a calibrated EMG-driven neuromusculoskeletal modeling framework, and musculoskeletal model simulations that employed static optimization. The EMG-driven model predicted antagonistic muscle function for pectoralis major, latissimus dorsi and teres major during abduction and flexion; supraspinatus during adduction; middle deltoid during extension; and subscapularis, pectoralis major and latissimus dorsi during external rotation. In contrast, static optimization neural solutions showed little or no recruitment of these muscles, and preferentially activated agonistic prime movers with large moment arms. As a consequence, glenohumeral joint force calculations varied substantially between models. The findings suggest that static optimization may under-estimate the activity of muscle antagonists, and therefore, their contribution to glenohumeral joint stability.     

A feedback inclusive neuromuscular training program alters frontal plane kinematics

Anterior cruciate ligament (ACL) neuromuscular training programs have demonstrated beneficial effects in reducing ACL injuries, yet further evaluation of their effects on biomechanical measures across a sports team season is required to elucidate the specific factors that are modifiable. The purpose of this study was to evaluate the effects of a 10-week off-season neuromuscular training program on lower extremity kinematics. Twelve Division I female soccer players (age: 19.2 ± 0.8 years, height: 1.67 ± 0.1 m, weight: 60.2 ± 6.5 kg) performed unanticipated dynamic trials of a running stop-jump task pretraining and posttraining. Data collection was performed using an 8-camera Vicon system (Los Angeles, CA, USA) and 2 Bertec (Columbus, OH, USA) force plates. The 10-week training program consisted of resistance training 2 times per week and field training, consisting of plyometric, agility, and speed drills, 2 times per week. Repeated measures analyses of variance (ANOVAs) were used to assess the differences between pretraining and posttraining kinetics and kinematics of the hip, knee, and ankle at initial contact (IC), peak knee flexion (PKF), and peak stance. Repeated measures ANOVAs were also used to assess isometric strength differences pretraining and posttraining. The alpha level was set at 0.05 a priori. The training program demonstrated significant increases in left hip extension, left and right hip flexion, and right hip adduction isometric strength. At IC, knee abduction angle moved from an abducted to an adducted position (-1.48 ± 3.65° to 1.46 ± 3.86°, p = 0.007), and hip abduction angle increased (-6.05 ± 4.63° to -10.34 ± 6.83°, p = 0.007). Hip abduction angle at PKF increased (-2.23 ± 3.40° to 6.01 ± 3.82°, p = 0.002). The maximum knee extension moment achieved at peak stance increased from pretraining to posttraining (2.02 ± 0.32 to 2.38 ± 0.75 N·m·kg?1, p = 0.027). The neuromuscular training program demonstrated a potential positive effect in altering mechanics that influence the risk of incurring an ACL injury.     

Cineradiographic study of forelimb movements during quadrupedal walking in the brown lemur (Eulemur fulvus, Primates: Lemuridae)

Movements of forelimb joints and segments during walking in the brown lemur (Eulemur fulvus) were analyzed using cineradiography (150 frames/sec). Metric gait parameters, forelimb kinematics, and intralimb coordination are described. Calculation of contribution of segment displacements to stance propulsion shows that scapular retroversion in a fulcrum near the vertebral border causes more than 60% of propulsion. The contribution by the shoulder joint is 30%, elbow joint 5%, and wrist joint 1%. Correlation analysis was applied to reveal the interdependency between metric and kinematic parameters. Only the effective angular movement of the elbow joint during stance is speed-dependent. Movements of all other forelimb joints and segments are independent of speed and influence, mainly, linear gait parameters (stride length, stance length). Perhaps the most important result is the hitherto unknown and unexpected degree of scapular mobility. Scapular movements consist of ante-/retroversion, adduction/abduction, and scapular rotation about the longitudinal axis. Inside rotation of the scapula (60 degrees -70 degrees ), together with flexion in the shoulder joint, mediates abduction of the humerus, which is not achieved in the shoulder joint, and is therefore strikingly different from humeral abduction in man. Movements of the shoulder joint are restricted to flexion and extension. At touch down, the shoulder joint of the brown lemur is more extended compared to that of other small mammals. The relatively long humerus and forearm, characteristic for primates, are thus effectively converted into stride length. Observed asymmetries in metric and kinematic behavior of the left and right forelimb are caused by an unequal lateral bending of the spinal column.     

Relationship of biomechanical factors to baseball pitching velocity: within pitcher variation

To reach the level of elite, most baseball pitchers need to consistently produce high ball velocity but avoid high joint loads at the shoulder and elbow that may lead to injury. This study examined the relationship between fastball velocity and variations in throwing mechanics within 19 baseball pitchers who were analyzed via 3-D high-speed motion analysis. Inclusion in the study required each one to demonstrate a variation in velocity of at least 1.8 m/s (range 1.8-3.5 m/s) during 6 to 10 fastball pitch trials. Three mixed model analyses were performed to assess the independent effects of 7 kinetic, 11 temporal, and 12 kinematic parameters on pitched ball velocity. Results indicated that elbow flexion torque, shoulder proximal force, and elbow proximal force were the only three kinetic parameters significantly associated with increased ball velocity. Two temporal parameters (increased time to max shoulder horizontal adduction and decreased time to max shoulder internal rotation) and three kinematic parameters (decreased shoulder horizontal adduction at foot contact, decreased shoulder abduction during acceleration, and increased trunk tilt forward at release) were significantly related to increased ball velocity. These results point to variations in an individual's throwing mechanics that relate to pitched ball velocity, and also suggest that pitchers should focus on consistent mechanics to produce consistently high fastball velocities. In addition, pitchers should strengthen shoulder and elbow musculature that resist distraction as well as improve trunk strength and flexibility to maximize pitching velocity and help prevent injury.     

Incidence of early posterior shoulder dislocation in brachial plexus birth palsy

Background

Nerve transfers are commonly employed in the treatment of brachial plexus injuries. We report the use of a new donor for transfer, the platysma motor branch.

Methods

A patient with complete avulsion of the brachial plexus and phrenic nerve paralysis had the suprascapular nerve neurotized by the accessory nerve, half of the hypoglossal nerve transferred to the musculocutaneous nerve, and the platysma motor branch connected to the medial pectoral nerve.

Results

The diameter of both the platysma motor branch and the medial pectoral nerve was around 2 mm. Eight years after surgery, the patient recovered 45° of abduction. Elbow flexion and shoulder adduction were rated as M4, according to the BMC. There was no deficit after the use of the above-mentioned nerves for transfer. Volitional control was acquired for independent function of elbow flexion and shoulder adduction.

Conclusion

The use of the platysma motor branch seems promising. This nerve is expendable; its section led to no deficits, and the relearning of motor control was not complicated. Further anatomical and clinical studies would help to clarify and confirm the usefulness of the platysma motor branch as a donor for nerve transfer.     

Influence of moderately intense strength training on flexibility in sedentary young women

The present study is the first to examine whether moderately intense resistance training improves flexibility in an exclusively young, sedentary women population. Twenty-four, young, sedentary women were divided into 3 groups as follows: agonist/antagonist (AA) training group, alternated strength training (AST) group, or a control group (CG). Training occurred every other day for 8 weeks for a total of 24 sessions. Training groups performed 3 sets of 10 to 12 repetitions per set except for abdominal training where 3 sets of 15 to 20 reps were performed. Strength (1 repetition maximum bench press) and flexibility were assessed before and after the training period. Flexibility was assessed on 6 articular movements: shoulder flexion and extension, horizontal shoulder adduction and abduction, and trunk flexion and extension. Both groups increased strength and flexibility significantly from baseline and significantly when compared with the CG (p ≤ 0.05). The AST group increased strength and flexibility significantly more than the AA group (p ≤ 0.05) in all but one measurement. This study shows that resistance training can improve flexibility in young sedentary women in 8 weeks.     

Motor unit recruitment in the trapezius muscle with special reference to coarse arm movements.

Chronic shoulder pain is common in a variety of occupations. The "Cinderella hypothesis" suggests that the pain originates from damaged type I muscle fibres driven into degenerative processes as a result of too long activation and too short recovery time. The main purpose of this study was to investigate if the same motor units are active during all phases of coarse arm movements. Eight healthy volunteers participated in the study. Intramuscular electromyographic signals were picked up with a four-lead fine wire electrode, during a unilateral straight arm movement. The movement started with either (part 1) an abduction or a flexion, then (2) a movement in the horizontal plane from the sagittal to the frontal plane or vice versa, and finally (3) an adduction or an extension to the start position. The movement cycle was performed in three different speeds, slow, medium, and high, with one, two or five cycles per 20 s, respectively. On an average, the motor unit action potentials (MUAPs) of 6 motor units (range, 1-15) were identified per trail. In total 94% of the MUAP trains that were identified showed firings in all 3 parts of the movements. The findings support the Cinderella hypothesis, although there is a need to further investigate the temporal pattern of long-term motor unit activity.     

Efficacy of two different stretch training programs (passive vs. proprioceptive neuromuscular facilitation) on shoulder and hip range of motion in older people

The aim of this study was to determine the influence of 2 methods of stretch training (passive and proprioceptive neuromuscular facilitation [PNF]) on range of motion (ROM) in older people between the age of 60 and 70 years over a period of 13 weeks. Fifty-four participants (39 women and 15 men) were divided into 3 groups: passive (n = 17; 66.5 ± 6.5 years), PNF (n = 17; age, 64.7 ± 4.0 years old), and control (n = 17; age, 66.4 ± 4.5 years). The subjects trained 2 times per week on nonconsecutive days for 13 weeks. Each training session included 2 flexibility exercises focused on the shoulder and hip joints. The PNF group performed 6 seconds of passive stretching, 3 seconds of muscular contractions, and 2 seconds of relaxation. The passive group performed 10 seconds of stretching and 5 seconds of relaxation. This sequence was repeated 3 times by each group. The control group did not perform any stretching. In the PNF group, there was an increase in hip ROM (p < 0.001) between pretest and posttest in the passive group and an improvement (p < 0.001) was observed between pretest and posttest, whereas in the control group, there was a significant decrease (p < 0.01) in hip ROM between pretest and posttest. In shoulder ROM, there was an increase (p < 0.001) between pretest and posttest in the passive group and an improvement (p < 0.001) was observed between pretest and posttest in the PNF group. There were no changes in shoulder ROM between pretest and posttest in the control group. The analysis of variance showed significant differences in hip and shoulder ROM between passive and control groups and PNF and control groups, but no significant differences were found between passive and PNF. The main finding was that the ability of physically active older people to increase ROM in response to stretching techniques is similar for both passive and PNF techniques.     

A kinematic comparison of alterations to knee and ankle angles from resting measures to active pedaling during a graded exercise protocol

ABSTRACT: Peveler, WW, Shew, B, Johnson, S, and Palmer, TG. A kinematic comparison of alterations to knee and ankle angles from resting measures to active pedaling during a graded exercise protocol. J Strength Cond Res 26(11): 3004-3009, 2012-Saddle height is one of the most researched areas of bike fit. The current accepted method for adjusting saddle height involves the use of a goniometer to adjust saddle height so that a knee angle between 25° and 35° is obtained. This measurement is taken while the cyclist maintains a static position with the pedal at the 6-o'-clock position. However, the act of pedaling is dynamic, and angles may alter during movement. The purpose of this study was to examine the alterations to knee and ankle angle occurring from static measures to active pedaling across intensities experienced by cyclists during a graded exercise protocol. Thirty-four recreational to highly trained cyclists were evaluated using 2D analysis of stationary position and 3 active levels (level 1, respiratory exchange ratio of 1.00, and max). Dependent measures were compared using repeated measures analysis of variance (p = 0.05). When examining the results, it is evident that significant alterations to pedal stroke occur from stationary measures to active pedaling and as intensity increases toward maximal. Plantar flexion increased when moving from stationary measures to active pedaling, which resulted in an increase in knee angle. Although still greater than stationary measures, less plantar flexion occurred at higher intensities when compared with lower intensity cycling. Less plantar flexion at higher intensities is most likely a result of application of a larger downward torque occurring because of greater power requirements at higher intensities. There appeared to be greater variability in angle when examining novice cyclists in relation to more experienced cyclists. Although stationary measures are where a bike fit session will begin, observation during the pedal cycle may be needed to fine-tune the riders' fit.     

Characterizing upper limb muscle volume and strength in older adults: a comparison with young adults

Aging is associated with the loss of muscle volume (MV) and force leading to difficulties with activities of daily living. However, the relationship between upper limb MV and joint strength has not been characterized for older adults. Quantifying this relationship may help our understanding of the functional declines of the upper limb that older adults experience. Our objective was to assess the relationship between upper limb MV and maximal isometric joint moment-generating capacity (IJM) in a single cohort of healthy older adults (age ≥ 65 years) for 6 major functional groups (32 muscles). MV was determined from MRI for 18 participants (75.1±4.3 years). IJM at the shoulder (abduction/adduction), elbow (flexion/extension), and wrist (flexion/extension) was measured. MV and IJM measurements were compared to previous reports for young adults (28.6±4.5 years). On average older adults had 16.5% less total upper limb MV compared to young adults. Additionally, older adult wrist extensors composed a significantly increased percentage of upper limb MV. Older adult IJM was reduced across all joints, with significant differences for shoulder abductors (p<0.0001), adductors (p=0.01), and wrist flexors (p<0.0001). Young adults were strongest at the shoulder, which was not the case for older adults. In older adults, 40.6% of the variation in IJM was accounted for by MV changes (p≤0.027), compared to 81.0% in young adults. We conclude that for older adults, MV and IJM are, on average, reduced but the significant linear relationship between MV and IJM is maintained. These results suggest that older adult MV and IJM cannot be simply scaled from young adults.     

Muscles within muscles: the neuromotor control of intra-muscular segments

The aim of this investigation was to anatomically identify, and then determine the function of, individual segments within the human deltoid muscle. The anatomical structure of the deltoid was determined through dissection and/or observation of the shoulder girdles of 11 male cadavers (aged 65–84 years). These results indicate that the deltoid consists of seven anatomical segments (D1–D7) based upon the distinctive arrangement of each segment's origin and insertion. Radiographic analysis of a cadaveric shoulder joint suggested that only the postero-medial segment D7 has a line of action directed below the shoulder joint's axis of rotation. The functional role of each individual segment was then determined utilising an electromyographic (EMG) technique. Seven miniature (1 mm active plate; 7 mm interelectrode distance) bipolar surface electrodes were positioned over the proximal portion of each segment's muscle belly in 18 male and female subjects (18–30 years). EMG waveforms were then recorded during the production of rapid isometric shoulder abduction and adduction force impulses with the shoulder joint in 40 degrees of abduction in the plane of the scapula. Each subject randomly performed 15 abduction and 15 adduction isometric force impulses following a short familiarisation period. All subjects received visual feed back on the duration and amplitude of each isometric force impulse produced via a visual force-time display which compared subject performance to a criterion force-time curve. Movement time was 400 ms (time-to-peak isometric force) at an intensity level of 50% maximal voluntary contraction. Temporal and intensity analyses of the EMG waveforms, as well as temporal analysis of the isometric force impulses, revealed the neuromotor control strategies utilised by the CNS to control the activity of each muscle segment. The results showed that segmental neuromotor control strategies differ across the breadth of the muscle and that individual segments of the deltoid can be identified as having either “prime mover”, “synergist”, “stabiliser” or “antagonist” functions; functional classifications normally associated with whole muscle function. Therefore, it was concluded that the CNS can “fine tune” the activity of at least six discrete segments within the human deltoid muscle to efficiently meet the demands of the imposed motor task. Accepted: 15 December 1997