Triply triggered doxorubicin release from supramolecular nanocontainers

The synthesis of a supramolecular double hydrophilic block copolymer (DHBC) held together by cucurbit[8]uril (CB[8]) ternary complexation and its subsequent self-assembly into micelles is described. This system is responsive to multiple external triggers including temperature, pH and the addition of a competitive guest. The supramolecular block copolymer assembly consists of poly(N-isopropylacrylamide) (PNIPAAm) as a thermoresponsive block and poly(dimethylaminoethylmethacrylate) (PDMAEMA) as a pH-responsive block. Moreover, encapsulation and controlled drug release was demonstrated with this system using the chemotherapeutic drug doxorubicin (DOX). This triple stimuli-responsive DHBC micelle system represents an evolution over conventional double stimuli-responsive covalent diblock copolymer systems and displayed a significant reduction in the viability of HeLa cells upon triggered release of DOX from the supramolecular micellar nanocontainers.     

Delineation of the hydroxyapatite-nucleating domains of bone sialoprotein

Bone sialoprotein (BSP) is a highly modified, anionic phosphoprotein that is expressed almost exclusively in mineralizing connective tissues and has been shown to be a potent nucleator of hydroxyapatite (HA). Two polyglutamic acid (poly[E]) regions, predicted to be in an alpha-helical conformation and located in the amino-terminal half of the molecule, are believed to be responsible for this activity. Using a prokaryotic expression system, full-length rat BSP was expressed and tested for HA nucleating activity in a steady-state agarose gel system. The unmodified protein is less potent than native bone BSP, indicating a role for the post-translational modifications in HA nucleation. Site-directed mutagenesis of the poly[E] regions in full-length BSP was performed, replacing the poly[E] with either polyaspartic acid (poly[D]) or polyalanine (poly[A]) to examine role of charge and conformation, respectively, in HA nucleation. Replacement of single domains with either poly[A] or poly[D] did not alter nucleating activity nor did replacement of both domains with poly[D]. Replacement of both domains with poly[A], however, significantly decreased nucleating activity. In addition, two recombinant peptides, each encompassing one of the two poly[E] domains, were expressed and tested for nucleating activity. Whereas the peptide encompassing the second poly[E] domain was capable of nucleating HA, the first domain peptide showed no activity. The conformation of the wild-type and mutated proteins and peptides were studied by circular dichroism and small angle x-ray scattering, and no secondary structure was evident. These results demonstrate that a sequence of at least eight contiguous glutamic acid residues is required for the nucleation of HA by BSP and that this nucleating "site" is not alpha-helical in conformation.     

Adsorbed surfactants for affinity chromatography. end-group modification of ethylene glycol polymers

The hydroxyl end-groups of Pluronic F108 [a tri-block copolymer surfactant of poly(ethylene glycol) and poly(propylene glycol) [PEG-PPG-PEG]] were converted into primary amine and quaternary ammonium equivalents for use in a new approach to affinity chromatography. The preparation of sulphonic acid end-groups was also attempted.     

Preparation and characterization of poly(acrylic acid)-hydroxyethyl cellulose graft copolymer

Poly(acrylic acid) hydroxyethyl cellulose [poly(AA)-HEC] graft copolymer was prepared by polymerizing acrylic acid (AA) with hydroxyethyl cellulose (HEC) using potassium bromate/thiourea dioxide (KBrO(3)/TUD) as redox initiation system. The polymerization reaction was carried out under a variety of conditions including concentrations of AA, KBrO(3) and TUD, material to liquor ratio and polymerization temperature. The polymerization reaction was monitored by withdrawing samples from the reaction medium and measuring the total conversion. The rheological properties of the poly(AA)-HEC graft copolymer were investigated. The total conversion and rheological properties of the graft copolymer depended on the ratio of KBrO(3) to TUD and on acrylic acid concentration as well as temperature and material to liquor ratio. Optimum conditions of the graft copolymer preparation were 30mmol KBrO(3) and 30mmol TUD/100g HEC, 100% AA (based on weight of HEC), duration 2h at temperature 50°C using a material to liquor ratio of 1:10.     

The biodegradation of poly-3-hydroxyalkanoates,PHAs, with long alkyl substitutents byPseudomonas maculicola

Utilizing a quantitative clear zone technique, the activity of an extracellular depolymerase system fromPseudomonas maculicola was investigated. Polymer degradation was influenced by the amount and availability of secondary carbon sources, with a simultaneous utilization of both sources. The initial carbon source in the liquid preculture also affected the eventual colony growth and polymer degradation. The enzyme solution was determined to readily degrade poly-3-hydroxyalkanoates (PHAs) with relatively long alkyl substituents at the 3 position: poly-3-hydroxyoctanoate (PHO), poly-3-hydroxynonanoate (PHN), and their copolymers (P[HO-co-HN]) and poly-3-hydroxyundecanoate (PHU). However, the system was unable to degrade either PHAs with shorter alkyl groups, including poly-3-hydroxybutyrate (PHB) and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-co-HV]) or PHAs with unusual substituents such as poly(3-hydroxy-5-phenylvaleric acid) (PHPV). It is proposed that degradation of these more bulky side chain polymers was prevented by the inability of the bacteria to assimilate their monomeric components, which inhibited the successful utilization of secondary carbon sources and thus inhibited colony growth.     

Synthesis and characterization of poly(dimer acid-brassylic acid) copolymer and poly(dimer acid-pentadecandioic acid) copolymer

Poly(dimer acid-brassylic acid) [P(DA-BA)] copolymers and poly(dimer acid-pentadecandioic acid) [P(DA-PA)] copolymers were prepared by melt polycondensation of the corresponding mixed anhydride prepolymers. The copolymers were characterized by Fourier transform infrared (FTIR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), wide angle x-ray powder-diffraction, and thermal gravimetric analysis (TGA). In vitro studies show that all the copolymers are degradable in phosphate buffer at 37 degrees C, and leaving an oily dimer acid residue after hydrolysis for the copolymer with high content of dimer acid. The release profiles of hydrophilic model drug, ciprofloxcin hydrochloride, from the copolymers, follow first-order release kinetics. All the preliminary results suggested that the copolymer might be potentially used as drug delivery devices.     

新型生物材料聚(乳酸-苯丙氨酸)的直接熔融聚合法制备与表征

直接以廉价的外消旋乳酸(D,L-LA)和苯丙氨酸(Phe)为原料,以氧化亚锡为催化剂,采用熔融聚合法合成了新型生物材料聚(乳酸-苯丙氨酸)共聚物。用特性粘数[η]、FTIR、1HNMR、DSC、GPC、XRD等进行系统表征,并考察了不同投料比对共聚物的影响。随着投料比中苯丙氨酸含量n(Phe)的增加,共聚物由一定的结晶性逐渐转变为无定形态。所得共聚物的Mw在2700~3900之间,能满足该生物降解材料在药物缓释领域中的应用。     

Application of a quartz crystal nanobalance to the molecularly imprinted recognition of phenylalanine in solution

A quartz crystal nanobalance (QCN) biosensor was developed for the selective determination of phenylalanine (Phe) in aqueous solutions. A Phe imprinted copolymer was synthesized using polyacrylonitrile and acrylic acid [poly(AN-co-AA)]. The copolymer was then coated on quartz crystal electrode to form complementary structures for the template recognition of Phe. The composite electrode was then used to determine Phe levels in solution. Determinations were based on frequency shifts of molecularly imprinted polymer (MIP) modified quartz crystal electrode caused by Phe adsorption. The frequency shifts were linearly dependent on Phe concentration over the range 50∼500 mgL⁻¹. The results obtained show that the imprinted poly(AN-co-AA) modified biosensor had higher sensitivity (0.5839 Hz/mgL⁻¹) than a non-molecularly imprinted copolymer (0.2724 Hz/mgL⁻¹). Furthermore, good reproducibility, R.S.D. = 1.84% (n = 7) was observed, and the detection limit was 45 mgL⁻¹. The selectivity of the imprinted poly(AN-co-AA) modified biosensor was examined using a number of analytes similar to Phe, i.e., dopamine (DA), ascorbic acid (AscA), vanillylmandelic acid (VMA), uric acid (UA), tryptophan (Trp), and tyrosine (Tyr), and the results obtained showed a size dependent selective effect.     

Stabilization of disulfide linkage in drug-polymer-immunoglobulin conjugate by microenvironmental control

The stability of disulfide linkage in the conjugate composed of the anti-cancer agent adriamycin, poly(ethylene glycol)-poly(aspartic acid) block copolymer, and immunoglobulin G was studied. The disulfide linkage between the block copolymer and immunoglobulin G was found to be resistant to reduction with dithiothreitol (DTT). This extraordinary resistance is considered to be brought about by steric hindrance of the poly(aspartic acid) chain binding adriamycin.     

Synthesis of biodegradable polyesters by Gram negative bacterium isolated from Malaysian environment

A locally isolated Gram negative bacterium, Cupriavidus sp. USMAA9-39 was able to produce various types of biodegradable polyesters through a two-step cultivation process. These are copolymer poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)], copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] and terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) [P(3HB-co-3HV-co-4HB)]. These polymers were synthesized by this bacterium when grown with a combination of some carbon sources. The biosynthesis of P(3HB-co-4HB) was achieved by using carbon sources such as γ-butyrolactone or 1,4-butanediol or by a combination of oleic acid with either γ-butyrolactone or 1,4-butanediol. Meanwhile, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was produced using 1-pentanol or valeric acid or by a combination of oleic acid with either 1-pentanol or valeric acid. When γ-butyrolactone or 1,4-butanediol with either valeric acid or 1-pentanol were used as mixed carbon sources, P(3HB-co-3HV-co-4HB) terpolymer were produced. The presence of 3HB, 3HV or/and 4HB monomers were confirmed by gas chromatography and nuclear magnetic resonance (NMR) spectroscopy.     

Incorporation of polyethylene glycol in polyhydroxyalkanoic acids accumulated by Azotobacter chroococcum MAL-201

Azotobacter chroococcum MAL-201 (MTCC 3853), a free-living nitrogen-fixing bacterium accumulates poly(3-hydroxybutyric acid) [PHB, 69% of cell dry weight (CDW)] when grown on glucose and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [PHBV with 19.2 mol% 3HV] when grown on glucose and valerate. Use of ethylene glycol (EG) and/or polyethylene glycols (PEGs) of low molecular weight as sole carbon source were detrimental to A. chroococcum growth and polymer yields. PEG-200, however, in the presence of glucose was incorporated into the polyhydroxyalkanoate (PHA) polymer. Addition of PEG-200 (150 mM) to culture medium during mid-log phase growth favored increased incorporation of EG units (12.48 mol%) into the PHB polymer. In two-step culture experiments, where valerate and PEG simultaneously were used in fresh medium, EG was incorporated most effectively in the absence of glucose, leading to the formation of a copolymer containing 18.05 mol% 3HV and 14.78 mol% EG. The physico-mechanical properties of PEG-containing copolymer (PHBV–PEG) were compared with those of the PHB homopolymer and the PHBV copolymer. The PHBV–PEG copolymer appeared to have less crystallinity and greater flexibility than the short-chain-length (SCL) PHA polymers.     

Differences in melting behavior between homopolymers and copolymers of DNA: Role of nonbonded forces for GC and the role of the hydration spine and premelting transition for AT

Melting measurements of the mono-base-pair DNA polymers showed that the melting temperature T_m of the B-DNA homopolymer poly (dA ) · poly (dT) is higher than that of the copolymer poly [d(A-T)]. On the other hand, the T_mof the B-DNA homopolymer poly (dG) · poly (dC) is lower than that of the copolymer poly [d (G-C)]. From a structural point of view, the cross-strand base-stacking interaction in a DNA homopolymer is weaker than that in a DNA copolymer with the same base pair. One would then expect that all the DNA homopolymers are less stable than the copolymer with the same base pair. We find that the inversion of the melting order seen in the AT mono-base-pair DNA polymers is caused by the enhanced thermal stability of poly (dA) · poly (dT) from a well-defined spine of hydration attached to its minor groove. In this paper we employ the modified self-consistent phonon theory to calculate base-pair opening probabilities of four B-DNA polymers: poly(dA)-poly(dT), poly(dG) · poly(dC), poly[d(A-T)], and poly[d(G-C)] at temperatures from room temperature through the melting regions. Our calculations show that the spine of hydration can give the inverted melting order of the AT polymers as compared to the GC polymers in fair agreement with experimental measurements. Our calculated hydration spine disruption behavior in poly(dA) · poly(dT) at premelting temperatures is also in agreement with experimentally observed premelting transitions in poly (dA) · poly (dT). The work is in a sense a test of the validity of our models of nonbonded interactions and spine of hydration interactions. We find we have to develop the concept of a strained bond to fit observations in poly (dA) · poly(dT). The strained-bond concept also explains the otherwise anomalous stability of the hydration chain. © 1993 John Wiley & Sons, Inc.     

Thiol-yne and thiol-ene "click" chemistry as a tool for a variety of platinum drug delivery carriers, from statistical copolymers to crosslinked micelles

Statistical and block copolymers based on poly(2-hydroxyethyl methacrylate) (PHEMA) and poly[oligo(ethylene glycol) methylether methacrylate] (POEGMEMA) were modified with 4-pentenoic anhydride or 4-oxo-4-(prop-2-ynyloxy)butanoic anhydride to generate polymers with pendant vinyl or acetylene, respectively. Subsequent thiol-ene or thiol-yne reaction with thioglycolic acid or 2-mercaptosuccinic acid leads to polymers with carboxylate functionalities, which were conjugated with cisplatin (cis-diamminedichloroplatinum(II) (CDDP)) to generate a drug carrier for Pt-drugs. Only the polymers modified with 2-mercaptosuccinic acid resulted in the formation of soluble well-defined polymers with gel formation being prevented. Due to the hydrophobicity of the drug, the block copolymers took on amphiphilic character leading to micelle formation. The micelles were in addition crosslinked to further stabilize their structure. Pt-containing statistical copolymer, micelles, and crosslinked micelles were then tested regarding their cellular uptake by the A549 lung cancer cell line to show a superior uptake of crosslinked micelles. However, due to the better Pt release of the statistical copolymer, the highest cytotoxicity was observed with this type of polymer architecture.     

Biodegradable amphiphilic triblock copolymer bearing pendant glucose residues: preparation and specific interaction with Concanavalin A molecules

A novel biodegradable amphiphilic block copolymer PLGG-PEG-PLGG bearing pendant glucose residues is successfully prepared by the coupling reaction of 3-(2-aminoethylthio)propyl-alpha-D-glucopyranoside with the pendant carboxyl groups of PLGG-PEG-PLGG in the presence of N,N'-carbonyldiimidazole. The polymer PLGG-PEG-PLGG, i.e., poly{(lactic acid)-co-[(glycolic acid)-alt-(L-glutamic acid)]}-block-poly(ethylene glycol)-block- poly{(lactic acid)-co-[(glycolic acid)-alt-(L-glutamic acid)]}, is prepared by ring-opening copolymerization of L-lactide (LLA) with (3s)-benzoxylcarbonylethylmorpholine-2,5-dione (BEMD) in the presence of dihydroxyl PEG with molecular weight of 2000 as macroinitiator and Sn(Oct)2 as catalyst, and then by catalytic hydrogenation. The glucose-grafted copolymer shows a lower degree of cytotoxicity to ECV-304 cells and improved specific recognition and binding with Concanavalin A (Con A). Therefore, this kind of glucose-grafted copolymer may find biomedical applications.     

Block copolymerization of vinyl compounds by the terminal-group activation of poly(α-amino acids) and the characterization of block copolymers

The terminal amino groups of polysarcosine, poly(γ-benzyl l-glutamate), and poly(ε-benzyloxycarbonyl-l-lysine) were haloacetylated. The mixture of the terminally haloacetylated poly(α-amino acid) and styrene or methyl methacrylate was photoirradiated in the presence of Mn₂(CO)₁₀, or heated with Mo(CO)₆, yielding A-B-A-type block copolymers consisting of poly(α-amino acid) (the A component) and vinyl polymer (the B component). The block copolymers were characterized, and the present investigation revealed that the thermally initiated polymerization of vinyl compounds by the trichloroacetyl poly(α-amino acid)/Mo(CO)₆ system was the most suitable for the synthesis of the α-amino acid/vinyl compound block copolymers. The A-B-A type block copolymers showed higher antithrombogenicity than the corresponding homopolymers. In particular, a film of the A-B-A-type block copolymer of poly[Glu(OBzl)] and polystyrene possessed a microphase-separated structure and did not induce a conformational change of fibrinogen adsorbed, leading to a high antithrombogenicity.     

Structural transformation of apocytochrome c induced by alternating copolymers of maleic acid and alkene

Apocytochrome c interacts with two copolymers: poly(isobutylene-alt-maleic acid) (PIMA) and poly(1-tetradecene-alt-maleic acid) (PTMA). The interaction leads to apocytochrome c, a conformational change from random coil to alpha-helical structure. The alpha-helix content is influenced by the copolymer concentration, the length of alkyl chain of the copolymers, and pH of the medium. The electrostatic attraction between the copolymer and protein is an indispensable factor for the folding of the protein at acid pH. The hydrophobic interaction is an important factor over the entire pH range, especially when both the copolymer and protein carry negative charges at alkaline pH. The electrostatic and hydrophobic attractions between the copolymer and protein exclude water molecules, promoting the formation of hydrogen bonds within the helical structure. On the other hand, the hydrogen bonds formed between the ionized carboxyl of the copolymer and the amide of the protein partly restrain the formation of hydrogen bonds within the helical structure when the copolymer concentration is higher at pH 6.5 and 10.5.     

Biodegradable amphiphilic block copolymers bearing protected hydroxyl groups: synthesis and characterization

A new biodegradable amphiphilic block copolymer, poly(ethylene glycol)-b-poly(L-lactide-co-9-phenyl-2,4,8,10-tetraoxaspiro[5,5]undecan-3-one) [PEG-b-P(LA-co-PTO)], was successfully prepared by ring-opening polymerization (ROP) of L-lactide (LA) and functionalized carbonate monomer 9-phenyl-2,4,8,10-tetraozaspiro[5,5]undecan-3-one (PTO) in the presence of monohydroxyl poly(ethylene glycol) as macroinitiator using Sn(Oct)2 as catalyst. NMR, FT-IR, and GPC studies confirmed the copolymer structure. It could self-assemble into micelles in aqueous solution with critical micelle concentration (CMC) in the magnitude of mg/L, which changed with the composition of the copolymer. After catalytic hydrogenation, copolymers with active hydroxyl groups were obtained. Adhesion and proliferation of Vero cells on the copolymer films showed that the synthesized copolymers were good biocompatible materials. In vitro degradation of the copolymer before and after deprotection was investigated in the presence of proteinase K. The free hydroxyl groups on the copolymers were capable of further modification with biotin. This new amphiphilic block copolymer has great potential for both drug encapsulation and conjugate because of its low CMC and the presence of active hydroxyl groups.     

The immobilization of enzymes and cells of Bacillus stearothermophilus onto poly(maleic anhydride/styrene)-Co-polyethylene and poly(maleic anhydride/vinyl acetate)-Co-polyethylene

The graft copolymer, poly(maleic anhydride/styrene)-co-polyethylene was prepared. The copolymer immobilized bovine serum albumin (BSA), but the amount coupled appeared to be effected by the amount of styrene in the graft copolymer, temperature, and pH of the coupling medium. Competition existed between hydrolysis of the grafted anhydride groups and the protein. A graft copolymer with 66% add-on immobilized 4.5 mg/glucose oxidase/g copolymer, 4.6 mg alkaline phosphates/g copolymer and 0.2 mg cell of Bacillus stearothermophilus/g copolymer. A number of copolymers containing poly(maleic anhydride/vinyl acetate)-co-polyethylene were prepared to cover a range of grafting levels. These immobilized larger quantities of BSA, alkaline phosphatase, and cells of B. stearothermophilus than did the styrene graft copolymer. The copolymer was also hydrolyzed to release the hydroxyl group from the poly(vinyl acetate) component of the grafted chains. Using p-benzoquinone as the "activating agent," the copolymer coupled to BSA and to acid phosphatase. Using p-toluene-sulfonyl chloride, the copolymer was very effective in immobilizing trypsin.     

Screening of microorganisms for biodegradation of poly(lactic-acid) and lactic acid-containing polymers.

The ability of some microorganisms to use lactic acid stereocopolymers and copolymers with glycolic acid as sole carbon and energy sources was studied under controlled or natural conditions. First, 14 filamentous fungal strains were tested in liquid cultures, adopting total lactic acid consumption, nitrogen source exhaustion, and maximal biomass production as selection criteria. Two strains of Fusarium moniliforme and one strain of Penicillium roqueforti were able to totally assimilate DL-lactic acid, partially soluble racemic oligomers (MW = 1,000), and the nitrogen source. Only one strain of F. moniliforme was able to grow on a poly(lactic acid)-glycolic acid copolymer (MW = 150,000) after 2 months of incubation at 28 degrees C on synthetic agar medium. Mycelium development was examined by scanning electron microscopy. F. moniliforme filaments were observed to grow not only at the copolymer surface but also through the bulk of the copolymer. In a second approach, plates made of a racemic poly(lactic acid) were buried in the soil before being incubated in petri dishes containing mineral agar medium under controlled conditions. Five strains of different filamentous fungi were isolated, and their ability to assimilate racemic poly(lactic acid) oligomers was tested in liquid cultures.     

Inhibition of DNA polymerase alpha by bleomycin

Bleomycin is an important anti-tumor agent which works primarily through it's degradation of DNA template. Using synthetic single (poly[dA]-oligo-[dT]) and double stranded (poly[dA-dT]) templates, we noted significant inhibition when the BLM resistant homopolymer was used. Furthermore, when each of the components of the DNA polymerase assay were treated with bleomycin separately, followed by removal of bleomycin, significant inhibition (35%) of the enzyme was observed. The limited inhibition of DNA polymerase by BLM was attributed to residual activity of the enzyme-inhibitor complex.