The inhibition of caeruloplasmin by azide

1. The inhibition of the oxidase activity of caeruloplasmin by azide was investigated at 25 degrees and 7.5 degrees . 2. The inhibition is reversible on dilution or Sephadex treatment, indicating a caeruloplasmin-azide complex. 3. The enzyme is protected against azide inhibition by chloride, acetate or EDTA, the last-named acting not by chelation but by a non-specific effect similar to that of acetate. 4. Lineweaver-Burk plots with different concentrations of azide are parallel. This may occur either when the enzyme-substrate complex or when a subsequent intermediate structure of the enzyme forms the inhibited complex. 5. At 7.5 degrees inhibition may be shown not to occur until after the initial reaction of enzyme with substrate. 6. At 7.5 degrees , the inhibition is of the mutual-depletion type, inhibitory concentrations of azide being comparable with the concentration of caeruloplasmin. It is shown that the binding of a single azide group completely inhibits a caeruloplasmin molecule. 7. An arrangement of the four valence-changing copper atoms of caeruloplasmin is proposed in which they are so close together in the cuprous form that reoxidation may occur by the simultaneous transfer of four electrons from the copper atoms to a single oxygen molecule.     

Carbonic anhydrase inhibitors. Inhibition of the zinc and cobalt gamma-class enzyme from the archaeon Methanosarcina thermophila with anions

Anions represent the second class of inhibitors of the zinc enzyme carbonic anhydrase (CA, EC 4.2.1.1), in addition to sulfonamides, which possess clinical applications. The first inhibition study of the zinc and cobalt gamma-class enzyme from the archaeon Methanosarcina thermophila (Cam) with anions is reported here. Inhibition data of the alpha-class human isozymes hCA I and hCA II (cytosolic) as well as the membrane-bound isozyme hCA IV with a large number of anionic species such as halides, pseudohalides, bicarbonate, carbonate, nitrate, nitrite, hydrosulfide, bisulfite, and sulfate, etc., are also provided for comparison. The best Zn-Cam anion inhibitors were hydrogen sulfide and cyanate, with inhibition constants in the range of 50-90 microM, whereas thiocyanate, azide, carbonate, nitrite, and bisulfite were weaker inhibitors (K(I)s in the range of 5.8-11.7 mM). Fluoride, chloride, and sulfate do not inhibit this enzyme appreciably up to concentrations of 200 mM, whereas the substrate bicarbonate behaves as a weak inhibitor (K(I)s of 42 mM). The best Co-Cam inhibitor was carbonate, with an inhibition constant of 9 microM, followed by nitrate and bicarbonate (K(I)s in the range of 90-100 microM). The metal poisons were much more ineffective inhibitors of this enzyme, with cyanide possessing an inhibition constant of 51.5mM, whereas cyanate, thiocyanate, azide, iodide, and hydrogen sulfide showed K(I)s in the range of 2.0-6.1mM. As for Zn-Cam, fluoride, chloride, and sulfate are not inhibitors of Co-Cam. These major differences between the two gamma-CAs investigated here can be explained only in part by the different geometries of the metal ions present within their active sites.     

Carbonic anhydrase inhibitors. Inhibition of the beta-class enzyme from the methanoarchaeon Methanobacterium thermoautotrophicum (Cab) with anions

The first inhibition study of the beta-class carbonic anhydrase (CA, EC 4.2.1.1) from the methanoarchaeon Methanobacterium thermoautotrophicum (Cab) with anions is reported here. Inhibition data of the alpha-class human isozymes hCA I and hCA II (cytosolic) as well as the membrane-bound isozyme hCA IV and the gamma-class enzyme from another archaeon, Methanosarcina thermophila (Cam) with a large number of anionic species such as halides, pseudohalides, bicarbonate, carbonate, nitrate, nitrite, hydrosulfide, bisulfite, sulfate, etc., are also provided for comparison. The best Cab anion inhibitors were thiocyanate and hydrogen sulfide, with inhibition constants in the range of 0.52-0.70 mM, whereas cyanate, iodide, carbonate, and nitrate were weaker inhibitors (Ki's in the range of 7.8-13.2 mM). Fluoride, chloride, and sulfate do not inhibit this enzyme appreciably, whereas the CA substrate bicarbonate, or other anions, such as bromide, nitrite, bisulfite, or sulfamate behave as weak inhibitors (Ki in the range of 40-45 mM). It is interesting to note that the metal poison, coordinating anions cyanide and azide are also rather weak Cab inhibitors (Ki in the range of 27-55 mM), whereas sulfamide is a very weak Cab inhibitor (Ki of 103 mM), although it strongly inhibits Cam (Ki of 70 microM). Surprisingly, phenylboronic and phenylarsonic acids, which have been investigated for the inhibition of all these CAs for the first time, showed very weak activity against the alpha-CA isozymes, but were effective Cab and Cam inhibitors. The best Cab inhibitors were just these two compounds (Ki's of 0.20-0.33 mM), whereas the best Cam inhibitor was sulfamic acid (Ki of 96 nM). These major differences of behavior between the diverse CAs investigated here toward anion inhibitors can be difficultly explained considering the convergent evolution of so diverse enzymes for the binding and turnover of small molecules such as carbon dioxide and anions.     

The oxidation of NN-dimethyl-p-phenylenediamine by oxidizing agents and by caeruloplasmin

1. The oxidation of NN-dimethyl-p-phenylenediamine (DPD) by inorganic oxidants and by caeruloplasmin was studied. Some experiments were also made with NNN'N'-tetramethyl-p-phenylenediamine (TPD). 2. E(mM) (550) of the first free radical oxidation product of DPD (DPD(+)) was 9.8 and E(mM) (563) of the corresponding product of TPD (TPD(+)) was 12.5. 3. The non-enzymic decomposition of DPD(+) was studied with respect to temperature, pH, concentration and DPD/DPD(+) ratio, thus defining conditions for enzyme experiments under which DPD(+) extinction at 550mmu was proportional to enzyme activity. 4. Rates of oxidation of DPD to DPD(+) by caeruloplasmin were constant over a range of DPD concentrations. At low DPD concentrations a lag period occurred, which was eliminated by addition of DPD(+). 5. A lag period was not observed with TPD, but at low TPD concentrations the rate of TPD(+) formation was greater when TPD(+) was added. This suggests that TPD(+) may compete weakly as a substrate with TPD and may be oxidized further by the enzyme before a non-enzymic reaction with TPD to form more TPD(+). 6. With DPD sulphate or acetate or TPD sulphate as substrate, Lineweaver-Burk plots were curved. With DPD hydrochloride the chloride ion caused inhibition at higher concentrations, opposing the curvature. 7. Curved Lineweaver-Burk plots were interpreted in terms of two types of substrate binding site with different K(m) values but similar V(max.) values. 8. The apparent thermodynamic changes associated with enzyme-substrate-complex formation at the sites with higher K(m) suggest that considerable conformational change may occur on binding at these sites. 9. With substrate concentrations at which only the low-K(m) sites are involved 2mol. of DPD(+)/mol. of caeruloplasmin are formed before a steady state is established. At higher substrate concentrations up to 3.2mol. of DPD(+)/mol. of caeruloplasmin are formed at this initial stage. 10. Results are discussed in relation to caeruloplasmin structures in which (a) two valence-changing and two permanently cuprous copper atoms are more accessible than the remaining four copper atoms or (b) binding of substrate at one site hinders access of substrate to another site.     

Interaction of mono- and dianions with cyanase: evidence for apparent half-site binding

Cyanase is an inducible enzyme in Escherichia coli that catalyzes bicarbonate-dependent hydrolysis of cyanate. The dianions oxalate, oxalacetate, and malonate are slow-binding inhibitors of cyanase, and some monoanions such as azide and chloride also inhibit cyanase activity [Anderson, P. M., & Little, R. M. (1986) Biochemistry 25, 1621-1626]. The purpose of this study was to investigate the interaction of selected dianions and monoanions by kinetic and equilibrium dialysis binding studies in an effort to obtain information about the active site and catalytic mechanism. Measurement of the effectiveness of 30 different dianions as inhibitors of cyanase showed a significant degree of structural and/or isomeric specificity and considerable variation with respect to the slow-binding nature of the inhibition. Oxalate and oxalacetate both show extreme slow-binding inhibition at very low concentrations. Kinetic studies of the rate of inhibition of cyanase by oxalate showed that the reaction is pseudo first order with respect to oxalate concentration and the results are consistent with a pathway in which oxalate forms a complex with the enzyme in a rapid initial reversible step followed by a slow isomerization step leading to a complex with a very low dissociation constant. The rate of inhibition is significantly reduced by the presence of relatively low concentrations of either azide (analogue of cyanate) or bicarbonate. Equilibrium dialysis binding studies showed that the stoichiometry of binding at saturation for oxalate, malonate, chloride, and bicarbonate is about 0.5 mol of ligand bound/mol of subunit for each compound.(ABSTRACT TRUNCATED AT 250 WORDS)     

Inhibitors of caeruloplasmin

1. A method is described by which substances inhibiting caeruloplasmin oxidase activity directly may be distinguished from those acting on stimulatory contaminant iron or on the product of enzyme action. 2. Many previously reported inhibitors, including saturated aliphatic carboxylates, hydrazines, 1,10-phenanthroline, borate and various psycho-active drugs, are found either not to act on the enzyme or to inhibit it only weakly. 3. A series of inorganic anions are compared as inhibitors. Anions such as azide and cyanide with strong copper-binding properties are the most effective inhibitors. There is a general inverse relationship between anion size and inhibitory power. Iodide is anomalous, the order of effectiveness of halides being F(-)>I(-)[unk]Cl(-)>Br(-). 4. Multidentate copperchelating ligands have little inhibitory effect. 5. A group of substances containing the structural unit [unk]C=[unk].CO(2)H, including fumarate and benzoate, cause inhibition. 6. Relative inhibitions by a series of mono-substituted benzoates are inversely related to molecular size. 7. Results are discussed in relation to earlier work on the disposition and function of the copper atoms of caeruloplasmin.     

The inhibition of caeruloplasmin by cyanide

1. The reversible inhibition of the oxidase activity of caeruloplasmin by cyanide was investigated. 2. The kinetics are unusual, being competitive but with the inhibited complex formed only during cycling. 3. Inhibitory concentrations of cyanide are comparable with that of caeruloplasmin. 4. One azide group completely inhibits a caeruloplasmin molecule but two cyanide groups are required. 5. The results suggest that azide binds to a half-reduced or fully reduced conformational isomer of the enzyme whereas cyanide binds to completely reoxidized isomers, and that inhibited complexes contain ligand bridges between copper atoms.     

Structural basis and mechanism of the inhibition of the type-3 copper protein tyrosinase from Streptomyces antibioticus by halide ions

The inhibition of the type-3 copper enzyme tyrosinase by halide ions was studied by kinetic and paramagnetic (1)H NMR methods. All halides are inhibitors in the conversion of l-3,4-dihydroxyphenylalanine (l-DOPA) with apparent inhibition constants that follow the order I(-) < F(-) < Cl(-) < Br(-) at pH 6.80. The results show that the inhibition arises from the interaction of halide with both the oxidized (affinity F(-) > Cl(-) > Br(-) > I(-)) and reduced (affinity I(-) > Br(-) > Cl(-) > F(-)) enzyme. The paramagnetic (1)H NMR of the oxidized enzyme complexed with the halides is consistent with a direct interaction of halide with the type-3 site and shows that the (Cu-His(3))(2) coordination occurs in all halide-bound species. It is surmised that halides bridge both of the copper ions in the active site. Fluoride and chloride are shown to bind only to the low pH form of oxidized tyrosinase, explaining the strong pH dependence of the inhibition by these ions. We further show that p-toluic acid and the bidentate transition state analogue, Kojic acid, displace chloride from the oxidized active site, whereas the monodentate substrate analogue, p-nitrophenol, forms a ternary complex with the enzyme and the chloride ion. On the basis of the experimental results, a model is formulated for the inhibitor action and for the reaction of diphenols with the oxidized enzyme.     

Conserved active site residues limit inhibition of a copper-containing nitrite reductase by small molecules

The interaction of copper-containing dissimilatory nitrite reductase from Alcaligenes faecalis S-6 ( AfNiR) with each of five small molecules was studied using crystallography and steady-state kinetics. Structural studies revealed that each small molecule interacted with the oxidized catalytic type 2 copper of AfNiR. Three small molecules (formate, acetate and nitrate) mimic the substrate by having at least two oxygen atoms for bidentate coordination to the type 2 copper atom. These three anions bound to the copper ion in the same asymmetric, bidentate manner as nitrite. Consistent with their weak inhibition of the enzyme ( K i >50 mM), the Cu-O distances in these AfNiR-inhibitor complexes were approximately 0.15 A longer than that observed in the AfNiR-nitrite complex. The binding mode of each inhibitor is determined in part by steric interactions with the side chain of active site residue Ile257. Moreover, the side chain of Asp98, a conserved residue that hydrogen bonds to type 2 copper-bound nitrite and nitric oxide, was either disordered or pointed away from the inhibitors. Acetate and formate inhibited AfNiR in a mixed fashion, consistent with the occurrence of second acetate binding site in the AfNiR-acetate complex that occludes access to the type 2 copper. A fourth small molecule, nitrous oxide, bound to the oxidized metal in a side-on fashion reminiscent of nitric oxide to the reduced copper. Nevertheless, nitrous oxide bound at a farther distance from the metal. The fifth small molecule, azide, inhibited the reduction of nitrite by AfNiR most strongly ( K ic = 2.0 +/- 0.1 mM). This ligand bound to the type 2 copper center end-on with a Cu-N c distance of approximately 2 A, and was the only inhibitor to form a hydrogen bond with Asp98. Overall, the data substantiate the roles of Asp98 and Ile257 in discriminating substrate from other small anions.     

Design and kinetic characterization of multisubstrate inhibitors of dopamine beta-hydroxylase

The synthesis and kinetics characterization of a new class of dopamine beta-hydroxylase (DBH; EC 1.14.17.1) inhibitor, 1-(4-hydroxybenzyl)imidazole-2-thiol, is reported. These inhibitors, which incorporate a phenethylamine substrate mimic and an oxygen mimic into a single molecule, exhibit both the kinetic properties and the potency (Kis approximately 10(-9) M) expected for a multisubstrate inhibitor and are therefore classified as such. Steady-state kinetic experiments with these multisubstrate inhibitors and their substructural analogues support the recently proposed pH-dependent changes in substrate binding order [Ahn, N., & Klinman, J. P. (1983) Biochemistry 22, 3106] and a mechanism whereby the inhibitor binds specifically to the reduced Cu+ form of enzyme at both the phenethylamine substrate site and the active-site copper atom(s). A Yonetani-Theorell double-inhibition experiments indicates mutually exclusive binding of the inhibitor substructures p-cresol and 1-methylimidazole-2-thiol to suggest an extremely short intersite distance between the phenethylamine binding site and the active-site copper atom(s).     

Interaction of anions with the active site of carboxypeptidase A

Studies of azide inhibition of peptide hydrolysis catalyzed by cobalt(II) carboxypeptidase A identify two anion binding sites. Azide binding to the first site (KI = 35 mM) inhibits peptide hydrolysis in a partial competitive mode while binding at the second site (KI = 1.5 M) results in competitive inhibition. The cobalt electronic absorption spectrum is insensitive to azide binding at the first site but shows marked changes upon azide binding to the second site. Thus, azide elicits a spectral change with new lambda max (epsilon M) values of 590 (330) and 540 nm (190) and a KD of 1.4 M, equal to the second kinetic KI value for the cobalt enzyme, indicating that anion binding at the weaker site involves an interaction with the active-site metal. Remarkably, in the presence of the C-terminal products of peptide or ester hydrolysis or carboxylate inhibitor analogues, anion (e.g., azide, cyanate, and thiocyanate) binding is strongly synergistic; thus, KD for azide decreases to 4 mM in the presence of L-phenylalanine. These ternary complexes have characteristic absorption, CD, MCD, and EPR spectra. The absorption spectra of azide/carboxylate inhibitor ternary complexes with Co(II)CPD display a near-UV band between 305 and 310 nm with epsilon M values around 900-1250 M-1 cm-1. The lambda max values are close to the those of the charge-transfer band of an aquo Co(II)-azide complex (310 nm), consistent with the presence of a metal azide bond in the enzyme complex.(ABSTRACT TRUNCATED AT 250 WORDS)     

An X-ray crystallographic study of the binding sites of the azide inhibitor and organic substrates to ceruloplasmin, a multi-copper oxidase in the plasma

Ceruloplasmin is a multi-copper oxidase, which contains most of the copper present in the plasma. It is an acute-phase reactant that exhibits a two- to three-fold increase over the normal concentration of 300?μg/ml in adult plasma. However, the precise physiological role(s) of ceruloplasmin has been the subject of intensive debate and it is likely that the enzyme has a multi-functional role, including iron oxidase activity and the oxidation of biogenic amines. The three-dimensional X-ray structure of the human enzyme was elucidated in 1996 and showed that the molecule was composed of six cupredoxin-type domains arranged in a triangular array. There are six integral copper atoms per molecule (mononuclear sites in domains 2, 4 and 6 and a trinuclear site between domains 1 and 6) and two labile sites with roughly 50% occupancy. Further structural studies on the binding of metal cations by the enzyme indicated a putative mechanism for ferroxidase activity. In this paper we report medium-resolution X-ray studies (3.0–3.5?Å) which locate the binding sites for an inhibitor (azide) and various substrates [aromatic diamines, biogenic amines and (+)-lysergic acid diethylamide, LSD]. The binding site of the azide moiety is topologically equivalent to one of the sites reported for ascorbate oxidase. However, there are two distinct binding sites for amine substrates: aromatic diamines bind on the bottom of domain 4 remote from the mononuclear copper site, whereas the biogenic amine series typified by serotonin, epinephrine and dopa bind in close vicinity to that utilised by cations in domain 6 and close to the mononuclear copper. These binding sites are discussed in terms of possible oxidative mechanisms. The binding site for LSD is also reported.     

Carbonic anhydrase inhibitors: the inhibition profiles of the human mitochondrial isoforms VA and VB with anions are very different

The first anion inhibition study of the mitochondrial human carbonic anhydrase (hCA, EC 4.2.1.1) isoform hCA VB is reported. Fluoride, chloride, bromide, iodide, cyanate, thiocyanate, cyanide, azide, bicarbonate, carbonate, nitrate, nitrite, hydrogen sulfide, bisulfite, sulfate, sulfamide, sulfamic acid, phenylboronic acid and phenylarsonic acid were compared as inhibitors of the two mitochondrial isozymes hCA VA and hCA VB. These enzymes are involved in biosynthetic reactions leading to fatty acid and Krebs cycle intermediates biosynthesis in addition to acting as catalysts for the interconversion of carbon dioxide and bicarbonate. The anion inhibition profiles of the two isoforms are dramatically different. The best hCA VB inhibitors were cyanate, thiocyanate, cyanide and hydrogensulfide (K(I)s of 80-76 microM) whereas the least effective ones were the halides (K(I)s of 11-72 mM), with the best inhibitor being fluoride and the least effective ones bromide and iodide. Whereas hCA VA is not sensitive to bicarbonate inhibition (K(I) of 82 mM) similarly to the cytosolic isoform hCA II, hCA VB is well inhibited by this anion, with a K(I) of 0.71 mM. Overall, hCA VB is more sensitive to anion inhibitors as compared to hCA VA. Such data support prior suggestions that the two mitochondrial isozymes play different physiological functions.     

Two sites of interaction of anions with cytochrome a in oxidized bovine cytochrome c oxidase

An interaction between cytochrome a in oxidized cytochrome c oxidase (CcO) and anions has been characterized by EPR spectroscopy. Those anions that affect the EPR g = 3 signal of cytochrome a can be divided into two groups. One group consists of halides (Cl-, Br-, and I-) and induces an upfield shift of the g = 3 signal. Nitrogen-containing anions (CN-, NO2-, N3-, NO3-) are in the second group and shift the g = 3 signal downfield. The shifts in the EPR spectrum of CcO are unrelated to ligand binding to the binuclear center. The binding properties of one representative from each group, azide and chloride, were characterized in detail. The dependence of the shift on chloride concentration is consistent with a single binding site in the isolated oxidized enzyme with a Kd of approximately 3 mm. In mitochondria, the apparent Kd was found to be about four times larger than that of the isolated enzyme. The data indicate it is the chloride anion that is bound to CcO, and there is a hydrophilic size-selective access channel to this site from the cytosolic side of the mitochondrial membrane. An observed competition between azide and chloride is interpreted by azide binding to three sites: two that are apparent in the x-ray structure plus the chloride-binding site. It is suggested that either Mg2+ or Arg-438/Arg-439 is the chloride-binding site, and a mechanism for the ligand-induced shift of the g = 3 signal is proposed.     

Substrate Inhibition Competes with Halide Inhibition in Polyphenol Oxidase

Polyphenol oxidase (PPO) is a ubiquitous enzyme important in the food industry. Although PPO activity followed Michaelis?CMenten kinetics at catechol concentrations of up to 1?mM, it slowly decreased at catechol concentrations above 2?mM. This result indicated that in addition to the active site (site A), the enzyme possesses a second catechol-binding site (site B) that exerts an inhibitory effect on PPO activity. Halides inhibit PPO activity in such a way that substrate inhibition is lessened when halide concentration is increased. Furthermore, elevated concentrations of catechol diminished the degree of inhibition by halides. These findings suggest that halides also bind to site B to inhibit PPO activity. A steady-state kinetic analysis demonstrated that the dissociation constant between catechol and PPO depended on the binding of halides to site B. The dissociation constants were greatest when chloride bound to the site. Bromide and iodide yielded lower dissociation constants, in that order. These data indicate that the binding of halide to site B modulated the structure of site A, thereby exerting an inhibitory effect.     

Structure of cyanase reveals that a novel dimeric and decameric arrangement of subunits is required for formation of the enzyme active site

BACKGROUND: Cyanase is an enzyme found in bacteria and plants that catalyzes the reaction of cyanate with bicarbonate to produce ammonia and carbon dioxide. In Escherichia coli, cyanase is induced from the cyn operon in response to extracellular cyanate. The enzyme is functionally active as a homodecamer of 17 kDa subunits, and displays half-site binding of substrates or substrate analogs. The enzyme shows no significant amino acid sequence homology with other proteins. RESULTS: We have determined the crystal structure of cyanase at 1.65 A resolution using the multiwavelength anomalous diffraction (MAD) method. Cyanase crystals are triclinic and contain one homodecamer in the asymmetric unit. Selenomethionine-labeled protein offers 40 selenium atoms for use in phasing. Structures of cyanase with bound chloride or oxalate anions, inhibitors of the enzyme, allowed identification of the active site. CONCLUSIONS: The cyanase monomer is composed of two domains. The N-terminal domain shows structural similarity to the DNA-binding alpha-helix bundle motif. The C-terminal domain has an 'open fold' with no structural homology to other proteins. The subunits of cyanase are arranged in a novel manner both at the dimer and decamer level. The dimer structure reveals the C-terminal domains to be intertwined, and the decamer is formed by a pentamer of these dimers. The active site of the enzyme is located between dimers and is comprised of residues from four adjacent subunits of the homodecamer. The structural data allow a conceivable reaction mechanism to be proposed.     

Kinetic properties of cyanase

Cyanase is an inducible enzyme in Escherichia coli that catalyzes the hydrolysis of cyanate. Bicarbonate is required for activity, perhaps as a substrate, and the initial product of the reaction is carbamate, which spontaneously breaks down to ammonia and bicarbonate [Anderson, P. M. (1980) Biochemistry 19, 2882]. The purpose of this study was to characterize the kinetic properties of cyanase. Initial velocity studies showed that both cyanate and bicarbonate act as competitive substrate inhibitors. A number of monovalent anions act as inhibitors. Azide and acetate appear to act as competitive inhibitors with respect to cyanate and bicarbonate, respectively. Chloride, bromide, nitrate, nitrite, and formate also inhibit, apparently as the result of binding at either substrate site. Malonate and several other dicarboxylic dianions at very low concentrations display "slow-binding", reversible inhibition which can be prevented by saturating concentrations of either substrate. The results are consistent with a rapid equilibrium random mechanism in which bicarbonate acts as a substrate, bicarbonate and cyanate bind at adjacent anion-binding sites, and both substrates can bind at the other substrate anion binding site to give a dead-end complex.     

Effects of azide on the S2 state EPR signals from Photosystem II

The anion azide, N₃ ^-, has been previously found to be an inhibitor of oxygen evolution by Photosystem II (PS II) of higher plants. With respect to chloride activation, azide acts primarily as a competitive inhibitor but uncompetitive inhibition also occurs [Haddy A, Hatchell JA, Kimel RA and Thomas R (1999) Biochemistry 38: 6104–6110]. In this study, the effects of azide on PS II-enriched thylakoid membranes were characterized by electron paramagnetic resonance (EPR) spectroscopy. Azide showed two distinguishable effects on the S₂ state EPR signals. In the presence of chloride, which prevented competitive binding, azide suppressed the formation of the multiline and g = 4.1 signals concurrently, indicating that the normal S₂ state was not reached. Signal suppression showed an azide concentration dependence that correlated with the fraction of PS II centers calculated to bind azide at the uncompetitive site, based on the previously determined inhibition constant. No evidence was found for an effect of azide on the Fe(II)Q_A ^- signals at the concentrations used. This result is consistent with placement of the uncompetitive site on the donor side of PS II as suggested in the previous study. In chloride-depleted PS II-enriched membranes azide and fluoride showed similar effects on the S₂ state EPR signals, including a notable increase and narrowing of the g = 4.1 signal. Comparable effects of other anions have been described previously and apparently take place through the chloride-competitive site. The two azide binding sites described here correlate with the results of other studies of Lewis base inhibitors.This revised version was published online in October 2005 with corrections to the Cover Date.     

Peroxidative oxidation of halides catalysed by myeloperoxidase. Effect of fluoride on halide oxidation

It was found that all halides can compete with cyanide for binding with myeloperoxidase. The lower is the pH, the higher is the affinity of halides. The apparent dissociation constants (Kd) of myeloperoxidase-cyanide complex were determined in the presence of F-, Cl-, Br- and I- in the pH range of 4 to 7. In slightly acidic pH (4 - 6) fluoride and chloride exhibit a higher affinity towards the enzyme than bromide and iodide. Taking into account competition between cyanide and halides for binding with myeloperoxidase the dissociation constants of halide-myeloperoxidase complexes were calculated. All halides except fluoride can be oxidized by H2O2 in the presence of myeloperoxidase. However, since fluoride can bind with myeloperoxidase, it can competitively inhibit the oxidation of other halides. Fluoride was a competitive inhibitor with respect to other halides as well as to H2O2. Inhibition constants (Ki) for fluoride as a competitive inhibitor with respect to H2O2 increased from iodide oxidation through bromide to chloride oxidation.     

The interaction of myeloperoxidase with ligands as studied by EPR

1. The reaction of myeloperoxidase with fluoride, chloride and azide has been studied by EPR. 2. Fluoride decreases the rhombicity of the high-spin heme signal of myeloperoxidase and the nuclear spin of the fluoride atom induces a splitting in g parallel of 35 G. This observation demonstrates that fluoride binds as an axial ligand to the heme iron of the enzyme. 3. Addition of chloride to the fluoride-treated enzyme increases the rhombicity of the high-spin heme signal and brings about a disappearance of the splitting at g parallel. The addition of azide to the fluoride-treated enzyme changes the spin state of the heme iron from a high-to a low-spin state (gx = 2.68, gy = 2.22 and gz = 1.80). 4. Upon addition of chloride or fluoride to low-spin azido-myeloperoxidase this compound is converted into the high-spin chlorido- or fluorido-myeloperoxidase. These observations demonstrate that these ligands compete for a binding site at or close to the heme iron of myeloperoxidase.