The life – history of the peach silver mite,Aculus fockeui (Acari: Eriophyidae) in Egypt

The peach silver mite Aculus fockeui (Nalepa and Trouessart) successfully developed from egg to adult stage when reared on a nectarine or peach leaflet attached with soft lateral divided branch dipped in test tube at different constant temperatures and 70% r.h. The effect of temperature on the development, reproduction and population growth was investigated. Below 20°C all activity ceased and by 33°C the adult began to slow down and cease all activity. At least of 34% of the generation time was spent in the egg stage at 29°C. Adult longevity decreased with increasing temperature. Fecundity was highest at 29°C with 43.16 eggs per female. Life table parameters showed that the population of A. fockeui on nectarine leaves multiplied 30.04 times in a generation time of 18.49 days at 29°C, while the population on peach leaves increased 13.87 times in a generation time of 19.18 days under the same conditions.     

Lessons from interactions within the cassava green mite fungal pathogen Neozygites tanajoae system and prospects for microbial control using Entomophthorales

Most fungal pathogens lack the capacity to search for their host but rather develop sit-and-wait strategies that favour contact with them. The success of these strategies depends upon the interactions of the pathogen with its host, the host plant and the environmental conditions, which altogether determine its transmissibility. Given the limited success that has characterized application of sustainable microbial control, particularly using Entomophthorales, interaction studies have been conducted with the entomophthoralean fungus Neozygites tanajoae, pathogenic to the cassava green mite (CGM), Mononychellus tanajoa, to help understand differences observed between laboratory and field performances of this pathogen. Reciprocal pathogen-host interactions as well as tritrophic interactions involving the host plant were studied. It was found that herbivory triggers the release of volatiles that promote sporulation of isolates of N. tanajoae, whereas the host mite avoids haloes of spores of this pathogen. However, the host mite does not avoid the pathogen when inside the mummified fungus-killed cadaver. The status of microbial control of CGM in Africa is reviewed and implications of these interactions are discussed for prospective application of microbial control using Entomophthorales.     

Evaluation of the predatory mite, Neoseiulus californicus, for spider mite control on greenhouse sweet pepper under hot arid field conditions

The efficacy of Neoseiulus californicus (a generalist predatory mite) for the biological control of Tetranychus urticae, was compared to release of Phytoseiulus persimilis (a specialist predatory mite) and an acaricide treatment in sweet pepper plants grown in greenhouse tunnels in a hot and arid climate. To ensure uniform pest populations, spider mites were spread on pepper plants in two seasons; a natural infestation occurred in one season. Predators were released prophylactically and curatively in separate tunnels when plants were artificially infested with spider mites, and at low and moderate spider mite populations when infestations occurred naturally. Although spider mite populations did not establish well the first year, fewer spider mites were recovered with release of N. californicus than with all other treatments. In the second year, spider mites established and the prophylactic release of N. californicus compared favorably with the acaricide-treated plants. In the course of monitoring arthropod populations, we observed a significant reduction in western flower thrips (Frankliniella occidentalis) populations in tunnels treated with N. californicus as compared with non-treated control tunnels. Our field trials validate results obtained from potted-plant experiments and confirm that N. californicus is a superior spider mite predator at high temperatures and low humidities.     

Enabling mycelial application of Hirsutella thompsonii for managing the coconut mite

Laboratory and field studies were conducted to examine the prospect of mycelial application of Hirsutella thompsonii as an alternative to the use of mycelial-conidial formulations of the fungus in the suppression of the coconut mite, Aceria guerreronis. In a series of laboratory experiments, glycerol, yeast extract powder and dehydrated malt extract broth were found to be the best among nine substances investigated as possible adjuvants for use on coconut palms in the field along with H. thompsonii mycelia. H. thompsonii biomass in the presence of adjuvants not only produced more colonies but also yielded more conidia per pellet. In terms of the density of conidia generated on a mycelial mat the treatments varied highly significantly in two methods, with glycerol showing an average of 106% increase over control. Though irradiance with simulated sunlight resulted in reduced conidiogenesis, in general, adjuvant-treated pellets, both exposed and unexposed to simulated sunlight, produced substantial conidiation compared with control, irrespective of the two incubation conditions. Better conidiation was observed under alternating light-dark regime than under total darkness in all the treatments. Glycerol boosted the pathogenicity of H. thompsonii by 16.5% over control. In the field, a newly developed mycelial formulation of H. thompsonii applied after tank-mixing separately with the three selected adjuvants brought down the post-treatment population of the coconut mite by 85.6-97.1%. Application of the fungus in combination with glycerol resulted in a tolerable mean nut damage grade of 2.0 during the pre-harvest stage, compared with an acute score of 4.0 in control palms.     

Biodiversity Realism: Preserving the tree of life

Biodiversity is a key concept in the biological sciences. While it has its origin in conservation biology, it has become useful across multiple biological disciplines as a means to describe biological variation. It remains, however, unclear what particular biological units the concept refers to. There are currently multiple accounts of which biological features constitute biodiversity and how these are to be measured. In this paper, I draw from the species concept debate to argue for a set of desiderata for the concept of “biodiversity” that is both principled and coheres with the concept’s use. Given these desiderata, this concept should be understood as referring to difference quantified in terms of the phylogenetic structure of lineages, also known as the ‘tree of life’.     

Trans-shell infection by pathogenic micro-organisms reduces the shelf life of non-incubated bird's eggs: a constraint on the onset of incubation?

Many birds initiate incubation before clutch completion, which results in asynchronous hatching. The ensuing within-brood size disparity often places later-hatched nestlings at a developmental disadvantage, but the functional significance of the timing of the onset of incubation is poorly understood. Early incubation may serve to maintain the viability of early-laid eggs, which declines over time owing to the putative effects of ambient temperature. An unexplored risk to egg viability is trans-shell infection by micro-organisms. We experimentally investigated the rate and magnitude of microbial trans-shell infection of the egg, and the relative effects of ambient temperature and micro-organisms on hatching success. We show that infection of egg contents is prevalent and occurs within the time required to lay a clutch. The probability of infection depends on the climatic conditions, the exposure period and the phylogenetic composition of the eggshell microbiota. We also demonstrate that microbial infection and ambient temperature act independently to reduce egg viability considerably. Our results suggest that these two factors could affect the onset of avian incubation in a wide range of environments.     

Calculating biological behaviors of epigenetic states in the phage λ life cycle

The biology and behavior of bacteriophage regulation have been the focus of classical investigations of molecular control of gene expression. Both qualitative and quantitative aspects of this behavior have been systematically characterized experimentally. Complete understanding of the robustness and stability of the genetic circuitry for the lysis-lysogeny switch remains an unsolved puzzle. It is an excellent test case for our understanding of biological behavior of an integrated network based on its physical, chemical, DNA, protein, and functional properties. We have used a new approach to non-linear dynamics to formulate a new mathematical model, performed a theoretical study on the phage life cycle, and solved the crucial part of this puzzle. We find a good quantitative agreement between the theoretical calculation and published experimental observations in the protein number levels, the lysis frequency in the lysogen culture, and the lysogenization frequency for mutants of O_R. We also predict the desired robustness for the genetic switch. We believe that this is the first successful example in the quantitative calculation of robustness and stability of the phage regulatory network, one of the simplest and most well-studied regulatory systems.     

Effect of carbon source on the β-glucosidase system of the thermophilic fungus Humicola grisea

H. grisea produced an extracellular -glucosidase (EC 3.2.1.21) at high activity in media supplemented with carboxymethyl cellulose (CMC) or cellobiose. Cellobiose-induced -glucosidase was insensitive to glucose repression whereas that of CMC-supplemented cultures was partially repressed. Molecular sieving revealed three main active components (M_r 50, 128 and 240 kDa). Glucose competitively inhibited -glucosidase activities with K_i values of 0.9mM and 3.3mM (extracellular) and 10.2mM and 22.6mM (cytosolic), induced in the presence of CMC or cellobiose respectively.The authors are with the Departamento de Biologia, Faculdade de Filosofia. Ciências e Letras de Ribeirão Preto, Universidade de São Paulo-14040-901 Ribeirão Preto, São Paulo, Brasil;     

Cancer: A matter of life cycle?

In the last decade, the concept of "cancer stem cells" has emerged, recognised by the fact that only a small fraction of tumour cells appears to retain the stem cell properties of self-renewal and unlimited proliferation. At the same time, it is well known that cancer is an age-related disease developing at the limit of proliferating cell senescence. The apparent need to link senescence and the capacity for self-renewal has lead some authors to suggest that cancers develop from amongst senescing stem cells. However, an alternative solution has recently been proffered by Sundaram M, Guernsey DL, Rajaraman MM, Rajaraman R [Neosis: a novel type of cell division in cancer. Cancer Biol Ther 2004;3:207-18], who suggest that stemness may be a transient, cyclic property afforded by de-polyploidisation of senescing cells which have undergone polyploidisation. In this mini-review, we attempt to reconcile both of these views by the idea that cycling polyploidy intermitting senescence and rejuvenation may be features of a life cycle analogous to the life cycles of certain unicellular organisms. Furthermore, we suggest that mitotic catastrophe may represent a mechanism through which the cell can switch from the usual mitotic cell-cycle to this evolutionarily conserved life cycle. Intriguingly, some most recent data suggest that cell senescence may be reversible and that stem cells are tolerant to polyploidy caused by genotoxic stress.     

In vitro effect of pesticides on the germination, vegetative growth, and conidial production of two strains of Metarhizium anisopliae

Entomopathogenic fungi are widely used as biological control agents against a broad range of insect and arachnid pests. However, the control efficacy of entomopathogenic fungi is variable because of unfavourable and fluctuating environmental conditions and intrinsic factors. One strategy to enhance entomopathogenic fungi efficacy is a combined use of entomopathogenic fungi and low dosages of pesticides. These sub-lethal dosages of chemicals can increase the control efficiency of entomopathogenic fungi but only if they do not affect the fungi. Adverse effects could include the inhibition of germination and/or vegetative growth as well as conidiogenesis. The present study investigated the in vitro effects of different concentrations of fipronil, permethrin, imidacloprid, NeemAzal, and amitraz as potential candidates for combined applications on two strains of the entomopathogenic fungus Metarhizium anisopliae (MA). MA was inoculated on a medium amended with five different concentrations (0.32-200 ppm) of the abovementioned pesticides. The germination, vegetative growth, and sporulation were evaluated. The results showed, according to a physiology parameter compatibility classification, that all pesticides were compatible with both tested MA strains. Only fipronil in the higher dose rates of 40 and 200 ppm was close to moderately toxic to MA-7. Furthermore, only higher concentrations of the pesticides caused a slight inhibition (about 15%) of conidial germination and a reduction in colony size. Sporulation was reduced at most by approximately 50% by 40 or 200 ppm of fipronil or amitraz, respectively. Therefore, it is possible to use the tested pesticides in combination with either strain of MA for an integrated pest management approach. Studies on the effect of these combinations on target organisms are in progress.     

A Theoretical Assessment of the Effects of Smoking on the Transmission Dynamics of Tuberculosis

Smoking has long being associated with tuberculosis. We present a tuberculosis dynamics model taking into account the fact that some people in the population are smoking in order to assess the effects of smoking on tuberculosis transmission. The epidemic thresholds known as the reproduction numbers and equilibria for the model are determined and stabilities analyzed. Qualitative analysis of the model including positivity and persistence of solutions are presented. The model is numerically analyzed to assess the effects of smoking on the transmission dynamics of tuberculosis. Numerical simulations of the model show that smoking enhances tuberculosis transmission, progression to active disease and in a population of smokers, tuberculosis cannot be controlled even when treatment success is assumed to be as high as 88%. Further, analysis of the reproduction numbers indicates that the number of active tuberculosis cases increases as the number of smokers increase.     

The reciprocal influence of the liver and blood stages of the malaria parasite’s life cycle

While the liver and blood stages of the Plasmodium life cycle are commonly regarded as two separate fields of malaria research, several studies have pointed towards the existence of a bidirectional cross-talk, where one stage of mammalian infection may impact the establishment and progression of the other. Despite the constraints in experimentally addressing concurrent liver and blood stage Plasmodium infections, animal models and clinical studies have unveiled a plethora of molecular interactions between the two. Here, we review the current knowledge on the reciprocal influence of hepatic and erythrocytic infection by malaria parasites, and discuss its impacts on immunity, pathology and vaccination against this deadly disease.     

Life cycle thinking in small and medium enterprises: the results of research on the implementation of life cycle tools in Polish SMEs—Part 3: LCC-related aspects

Purpose

This article is the third of a series of articles presenting the results of research on the implementation of life cycle management tools in small- and medium-sized companies in Poland. The purpose of the three-part series of articles is to present the results of research on the implementation of life cycle tools in Polish small and medium enterprises (SMEs). This work is part of a project financed by the Polish Agency for Enterprise Development (PAED) which began in February 2011. It was carried out by the Wielkopolska Quality Institute—a business environment institution associated with the Polish Centre for LCA (PCLCA). The main practical objective of the project was to support SMEs in their business development, e.g. by expanding their horizons beyond the sphere of their operation and identifying new areas for the improvement and promotion of the products and services on offer. The specific objective of the analysis involving the assessment of life-cycle costs of products and services was an attempt to answer the question to determine whether the assessment carried out in accordance with the life-cycle cost (LCC) methodology is a good tool for cost management in this type of business. Part 3 describes the results of studies on the assessment of the implementation of LCC in SMEs conducted in 50 companies involved in the project.

Methods

In order to assess the effectiveness of the project and the effectiveness of the implementation of LCA and LCC, a survey was conducted of small- and medium-sized businesses where the implementation works had been fully completed. In total, 50 organisations agreed to participate in the LCC survey (while 46 in the LCA—part 2 paper), which was 71 % of all the companies where the LCA and LCC studies had been carried out within the project. The survey was conducted using individual in-depth interviews. Questions to the representatives of the companies referred both to aspects of their operating in the market (characteristics of a company, its market share, management systems, environmental policy, suppliers, clients) and the implementation of their environmental service (assessment of its effectiveness, motivation, difficulties in its implementation), as well as opinions on the potential applications of LCA in their current operations.

Results and discussion

The experience and observations of LCC experts resulting from their cooperation with the analysed organisations are largely supported by the results of the survey. The overall impression gained from the project is that the small- and medium-sized enterprises considered have a problem with accepting and understanding the life-cycle perspective, and show limited interest in taking liability for environmental and cost aspects beyond the mandatory legal standards and boundaries of their business operations. Nevertheless, the LCC analyses aroused much bigger interest among the companies than the environmental due to the fact that the cost aspects in companies undergoing normal development are seen as an important source of information about the structure of the costs generated with respect to the products or services provided. It is important to note that a very important factor encouraging businesses to join the studies was the fact that they were cost-free. Moreover, the planned introduction of a new product onto the market was the argument that often influenced the decision to implement the LCC. The survey has shown that companies rarely perform cost analyses including all stages of the life cycle of a product or service. Although the awareness of the importance of conducting economic researches for the entire life cycle of a product or service is great, it turned out to be problematic to unambiguously define the practical use of such an analysis, at least at the present stage of development of the companies surveyed.

Conclusions

The results obtained in the survey indicate that in the case of simple products, with a short life cycle, complex cost analyses may seem less useful. For more complex products or services, with long periods of use, high reliability required, and high operating costs, the analyses presented are useful tools that increase the economic efficiency of the projects implemented. It appears that from the point of view of polish SMEs, the usefulness of an LCA is seen mainly from the angle of opportunities for cost reduction (preferably in business) and increased sales (marketing). A good solution would be to conduct relatively simple, but integrated LCA/LCC analyses in SMEs so that the companies would clearly see the economic effects of the proposed environmental improvements.     

Nutrition in the life cycle assessment of foods—function or impact?

Purpose

This work provides an unambiguous conceptual framework for inclusion of nutrition in Life Cycle Assessments (LCAs) of food that enables the distinction between two different roles of nutrition, namely serving as the basis of food comparisons via the functional unit and as an impact pathway that links food ingestion with human health effects.

Methods

We compare how nutritional aspects have been considered in the functional unit of published LCAs of food with the procedural requirements for ensuring comparability of the functional units. We consider the relevance of nutrient profiling models for assessing food- and diet-related health damages and benefits in the context of LCAs of food. We finally recommend a method that will enable a systematic, comparative, and holistic assessment of the marginal health effect of food products on human health.

Results and discussion

Satiety is proposed as a central attribute for comparisons of food products, while weighted measures of nutrient content are suggested to be largely misplaced as part of the functional unit. In contrast, nutritional measures have a large role to play in assessing the human health impacts of the marginal ingestion of specific food products. Such measures should enable a direct quantification of human health effect and benefits and should take advantage of robust epidemiological evidence.

Conclusions

Nutritional measures enter into both the functional unit in the form of satiety measures and into the calculation of impacts in the form of the marginal influence of the specific food item on the human health impact of the overall diet. To enhance the differentiation of health impacts at the level of individual food items, it is recommended to combine the nutrient balance indicator with the DALY Nutritional Index (DANI) in each specific dietary context.

     

Is the life cycle of high arctic aphids adapted to climate change?

The high arctic aphid Acyrthosiphon svalbardicum Heikinheimo is endemic to Svalbard and has developed a shortened life cycle to cope with harsh environmental conditions prevailing in this archipelago. Previous studies in the 1990s showed that contrarily to Sitobion calvulum, a species which is also restricted to Svalbard and displays a two-generation life cycle, A. svalbardicum can produce a third generation that, on average, should complete its development and reproduction once every 28 years. Because temperature has risen substantially in Svalbard during the past 10 –15 years and is predicted to rise further, budget requirements for this extra-generation should be met more and more frequently and the impact of the resulting demographic increase should be easily measurable in field populations of A. svalbardicum. Here, we tested this hypothesis by performing a series of experiments designed to study population dynamics and morph production of A. svalbardicum. Surprisingly, the three-generation life cycle was not detected either in field populations surveyed for two consecutive years or in controlled conditions where temperature was manipulated. Although we cannot reject the possibility that A. svalbardicum populations may develop a three-generation life cycle under certain circumstances, this strategy seems very rare and not adaptive as it would have been selected in the recent years of warming observed in Svalbard.     

Increasing the lifetime of products by nanomaterial inclusions—life cycle energy implications

The International Journal of Life Cycle Assessment - Typically, the high energy required to manufacture nanomaterials is weighed against the benefits transferred to a product. Adequately...     

How can a life cycle inventory parametric model streamline life cycle assessment in the wooden pallet sector?

Purpose

This study discusses the use of parameterization within the life cycle inventory (LCI) in the wooden pallet sector, in order to test the effectiveness of LCI parametric models to calculate the environmental impacts of similar products. Starting from a single case study, the objectives of this paper are (1) to develop a LCI parametric model adaptable to a range of wooden pallets, (2) to test this model with a reference product (non-reversible pallet with four-way blocks) and (3) to determine numerical correlations between the environmental impacts and the most significant LCI parameters; these correlations can be used to improve the design of new wooden pallets.

Methods

The conceptual scheme for defining the model is based on ISO14040-44 standards. First of all, the product system was defined identifying the life cycle of a generic wood pallet, as well as its life cycle stages. A list of independent and dependent parameters was used to describe the LCI flows of a generic wooden pallet. The LCI parametric model was applied to calculate the environmental impacts of the reference product, with regard to a selection of impact categories at midpoint level (climate change, human toxicity, particulate matter formation, agricultural land occupation, fossil depletion). The model was then applied to further 11 wooden pallets belonging to the same category.

Results and discussion

The definition of a LCI parametric model based on 31 independent parameters and 21 dependent parameters streamlined the data collection process, as the information required for fulfilling the LCI are standard information about the features of the wooden pallet and its manufacturing process. The contribution analysis on the reference product revealed that the most contributing life cycle stages are wood and nails extraction and manufacturing (positive value of environmental impact) and end-of-life (avoided impact). This result is driven by two parameters: mass of wood and average distance for transport of wood. Based on the results of the application of the LCI parametric model to the identified products, one parameter-based regression and one multiple non-linear regression allowed to define a correlation between the life cycle impact assessment (LCIA) category indicators considered and the most influencing parameters.

Conclusions

The definition of LCI parametric model in the wooden pallet sector can effectively be used for calculating the environmental impacts of products with different designs, as well as for obtaining a preliminary estimation of the life cycle environmental impacts of new products.