Distribution of platelets on flat substrata

Rabbit platelets attached at a high density to flat glass were examined in a scanning electron microscope. Contours of neighbouring well-spread platelets were almost parallel to each other; overlapping of the edges of two cells were small and rare. Quantitative analysis has shown that overlappings actually observed were much smaller in area that those calculated on the basis of the assumption that platelets are randomly distributed on the substratum. Thus, contact inhibition of spreading is characteristic not only of nucleated cells but also of platelets.     

Surface movements during the spreading of blood platelets

When human blood platelets spread on a substratum they increase their surface area as much as 4-fold. We investigated the mechanism of spreading by light microscopy and by scanning and transmission electron microscopy. Contact of a platelet with a glass surface induces formation of thin extensions which spread out over the substratum. These extensions resemble the actin-containing microspikes and lammelipodia of tissue cells in culture and appear to be drawn from the peripheral cortical layer associated with the plasma membrane. If platelets are initially labeled on their external surface with cationic ferritin or lentil-conjugated gold particles and then allowed to spread, the labels are retained in the central region, or granulomere. Proteins released by the spreading platelet--fibronectin and fibrinogen--also remain in this central unspread region. Peripheral regions of spread platelet surface (hyalomere) were unlabeled following the above procedures but could be labeled with cationic ferritin or lentil-conjugated gold provided these were applied after spreading was completed. These markers are cleared with time from the periphery, moving centripetally to accumulate at the granulomere. We suggest, on the basis of these observations, that platelets spread onto a substratum by a closely similar mechanism to that used by cells such as fibroblasts. In both cases the spreading involves the peripheral actin cortex and is accompanied by a continual centripetal movement of surface components--a "membrane flow"--which continues even after spreading is completed.     

Contact formation by fibroblasts adhering to heparan sulfate-binding substrata (fibronectin or platelet factor 4)

The process of cell-substratum adhesion of BALB/c 3T3 fibroblasts on fibronectin (FN)-coated substrata was compared with that of cells adhering to substrata coated with the heparan sulfate (HS)-binding protein, platelet factor four (PF4). FN has binding domains for HS and an unidentified cell surface receptor, whereas PF4 binds to only HS on the surface of the cell. The attachment and early spreading sequences of cells on either substratum were similar as shown by scanning electron microscopy (SEM). Within 2 h of spreading, cells on FN developed typical fibroblastic morphologies, whereas those on PF4 lacked polygonal orientations and formed numerous broadly spread lamellae. Interference reflection microscopic analysis indicated that PF4-adherent cells formed only close adhesive contacts, whereas FN-adherent cells formed both close contacts and tight focal contacts. Cells on either substratum responded to Ca2+ chelation with EGTA by rounding up, but remained adherent to the substratum by relatively EGTA-resistant regions of the cell's undersurface, demonstrating that cell surface HS by binding to an appropriate substratum is capable of initiating a Ca2+-dependent spreading response. The EGTA-resistant substratum-attached material on PF4 was morphologically similar to that on FN, the latter of which was derived from both tight focal contacts and discrete specializations within certain close contacts. These studies show that heparan sulfate proteoglycans on the surface of these cells can participate in the formation of close contact adhesions by binding to an appropriate substratum and suggest that sub-specializations within close contact adhesions may evolve into tight focal contacts by the participation of an unidentified cell surface receptor which binds specifically to fibronectin but not to PF4. In addition, the functional role of FN in tight focal contact formation is demonstrated.     

Dynamics of the spreading of normal and transformed hamster cells]

Morphological peculiarities of spreading studied by scanning electron microscopy in two lines of transformed hamster fibroblasts (HETR and HEC--40) were compared to the normal hamster embryo fibroblasts (NHG). The surface of spherical not streading cells was of a mixed type microrelief (small blebs and microvilli). In transformed cells, the microvillous component was more developed than in their normal counterparts. During cell spreading distinct differences were observed between normal and transformed cells in their cell surface contact interaction with solid substratum. NHF cells formed a well-developed concentrically disposed thin lamelloplasm, while HEC-40 cells had asimmetrically disposed lamelloplasm in combination with long filopodia and HETR cells had a rather thick lamelloplasm consisting of several fragments (often forming star-like pattern). At the polarization stage of spreading neither HETR nor HEC-40 reached the same degree of spreading and flattening as NHF. Moreover, the dorsal surface of transformed cells had a complex microrelief in contrast to a rather smooth surface of NHF. These results are discussed in connection with earlier results on spreading of normal and transformed mouse fibroblasts.     

Cyclic AMP increases the Adhesion of Fibroblasts to Substratum

THE interaction between the cell surface and the substratum is very important in determining several characteristics of cells growing in tissue culture. Transformed cells are less adherent to the substratum than untransformed cells¹ and this reduced interaction with the substratum may be responsible for abnormal properties such as the loss of contact or density dependent inhibition of growth² and the ability to form colonies in agar and to grow in suspension culture.     

Adhesion sites of neural tumor cells : Morphogenesis of substratum-attached material

An analysis by scanning electron microscopy (SEM) has been performed of the attachment, neurite outgrowth, EGTA-mediated detachment, and morphological characteristics of substratum-attached material (SAM) for non-neurite- or neurite-containing rat neuroblastoma cells growing on serum-coated plastic coverslips. Attachment is initiated by filopodial contact with the substratum and with subsequent broad spreading of the surface membrane; footpad-type adhesion sites commonly observed in fibroblasts are not apparent at the periphery of these neuronal cells. During serum starvation, neurite extension occurs by elongation into bipolar cells, membrane ruffling and filopodial extension at these polar ends, and growth cone extension over the substratum. With time, some growth cones terminate membrane ruffling and spread extensively into a footpad-like morphology. EGTA-mediated detachment occurs by cell body rounding and pulling away from small focal areas of contact between the surface membrane and the substratum. After complete detachment, two morphologically different classes of SAM are identified. Non-neurite-containing neuroblastoma cells leave large membranous pools of SAM which are rigid and raised off the substratum, revealing small focal contact areas. A second morphological class of SAM is identified in neurite-containing cultures as small pools of membranous material tightly bound to the substratum and reminiscent of the footpad SAM deposited by fibroblasts. Along with the biochemical differences noted previously for the SAMs from non-neurite- or neurite-containing cultures, these studies indicate that the adhesion between the growth cone of neurites and the serum-coated substratum is significantly different from the adhesion processes occurring between the cell body and the substratum.     

Cell spreading factor. Occurrence and specificity of action.

A factor required for spreading of substratum-attached baby hamster kidney cells (BHK), Chinese hamster ovary (CHO) cells, HeLa cells, and L cells has been isolated and purified from fetal calf serum. A similar factor has also been found in calf, porcine, human, rabbit, and chicken sera. The spreading factor was active when adsorbed to the substratum and prior adsorption of other proteins prevented cell spreading, regardless of the addition of spreading factor or unfractionated serum to the incubation medium. Antibody against the fetal calf spreading factor inhibited the spreading activity associated with unfractionated fetal calf serum and also the spreading activity associated with calf serum and porcine serum. In model system studies it was found that antibody against BHK cell surfaces induced cell spreading when the antibody was adsorbed to the substratum; when it was present in the incubation medium as well as on the substratum, cell spreading was not observed. The data are discussed in terms of the hypothesis that there is a specific serum factor which adsorbs to the substratum surface and is thereby activated, and which then forms the target for certain cell surface receptors. Interaction between adsorbed-activated factor and cell surface receptors leads to cell spreading.     

Electron microscopic study of the interaction between neoplastic fibroblasts and the substrate in tissue culture]

Electron microscope study of neoplastic L fibroblasts was carried out in 15, 30, 60, and 90 min after their attachment to solid substratum. Comparative analysis of neoplastic and normal fibroblasts at the same stages was carried out. Spreading rate of L fibroblasts proved slower than that of normal fibroblasts. Primary reaction of neoplastic cells was disturbed on the contact with substratum: it was morphologically manifested in changing of structure of the cell lower surface. Bundles of microfilaments were absent from the neoplastic fibroblasts' cytoplasm. The above changes, apparently, may entail the lesser degree of spreading and the weaker attachement of neoplastic fibroblasts to the substratum.     

Induction of cell spreading by substratum-adsorbed ligands directed against the cell surface

Studies were carried out to compare the spreading of baby hamster kidney (BHK) cells, which occurs by an interaction between the cells and a specific serum glycoprotein (ASF) adsorbed onto the substratum surface, with the spreading of BHK cells that occurs by an interaction between the cells and substrata coated with ligands directed at various cell surface determinants. The ligands tested were polycationic ferritin, concanavalin A (ConA) and antibody directed against BHK plasma membranes. Cell spreading onto ASF and ligand-coated substrata were similar even though different cell surface components were apparently involved. The similarities were:

1. 1. The shape of the spread cells.

2. 2. The inhibition of cell spreading by conditions that interfere with metabolic activity, block free sulfhydryl groups, or interfere with microtubules and microfilaments.

3. 3. The similar reorganization of certain cell surface antigenic determinants during cell spreading onto any of the substrata.

The results indicate that cell spreading is a general cellular response to specific cell-substratum interactions but does not depend upon binding between a unique cell surface receptor and the substratum.     

Focal contacts of spreading platelets with the substratum

Contacts with glass substratum formed by the spreading rabbit platelets were examined by an antibody-exclusion method; monoclonal antibodies against 80 kD bovine serum protein were used. It was found that platelets form focal contacts in the course of spreading. The size of the largest focal contacts formed by platelets is smaller than that of the contacts formed by fibroblasts. The antibody-exclusion method revealed focal contacts of platelets much more clearly than interference reflection microscopy (IRM). The similarity of reactions involved in spreading platelets and of large nucleus-containing tissue cells is discussed.     

The serum dependence of baby hamster kidney cell attachment to a substratum

Normal attachment and spreading of baby hamster kidney cells onto a non-living substratum requires the presence of a specific serum component adsorbed to the substratum surface and Ca²⁺ ions in the medium. In the absence of the adsorbed serum factor or Ca²⁺ ions cells attach but do not spread. Thus, although the initial rate of BHK cell attachment is faster in serum-free medium than serum-containing medium, no cell spreading occurs in serum-free medium. Adsorption of serum onto the substratum results in a lag phase in the time course of cell attachment which can be eliminated by blocking the negatively charged groups of the serum components adsorbed to the substratum surface; blocking positively charged groups or free sulfhydryl groups of the adsorbed serum components is without effect. The requirement for serum components can be substituted for by adsorbing molecules such as concanavalin A or polycationic ferritin to the substratum surface; however, only ConA results in normal morphology of cell spreading. The data are discussed in terms of a non-electrostatic direct cell-substratum binding model of cell attachment.     

Locomotory behavior, contact inhibition, and pattern formation of 3T3 and polyoma virus-transformed 3T3 cells in culture

The social behavior of 3T3 cells and their polynoma virus-transformed derivative (Py3T3 cells) was examined by time-lapse cinemicrography in order to determine what factors are responsible for the marked differences in the patterns formed by the two cell lines in culture. Contrary to expectations, both cell types have been found to exhibit contact inhibition of cell locomotion. Therefore, the tendency of 3T3 cells to form monolayers and of Py3T3 cells to form crisscrossed multilayers cannot be explained on the basis of the presence versus the absence of contact inhibition. Morevover, with the exception of cell division control, the social behavior of the two cell types is qualitively similar. Both exhibit cell underlapping and, after contact between lamelliopodia, both show inhibition of locomotory activity and adhesion formation. Neither cell type was observed to migrate over the surface of another cell. The two cell types do show quantitative differences in the frequency of underlapping, the frequency with which contact results in inhibition of locomotion, and the proportion of the cell margin that adheres to the substratum. The increased frequency pf Py3T3 underlapping is correlated with the reduced frequency of substratum adhesions, which in turn favors underlapping. On the basis of these observations, it is concluded that the differences in culture patterns are the result of differences in the shapes of the individual cells, such that underlapping, and hence crisscrossing, is favored in Py3T3 cell interactions and discouraged in 3T3 cells.     

The removal of extracellular fibronectin from areas of cell-substrate contact

Immunofluorescent labeling for fibronectin was largely excluded from sites of closest contact between spreading chicken gizzard fibroblasts and the substratum. This was observed by double immunofluorescent labeling of fixed cells for fibronectin and vinculin, a smooth muscle intracellular protein that is specifically associated with focal adhesion plaques, in conjunction with interference-reflection microscopy. When the cells were plated on a fibronectin-coated substratum they adhered to its surface and rapidly spread on it. The immunofluorescent labeling for fibronectin in those cultures (after fixation and triton permeabilization) was usually absent from the newly formed, vinculin-containing focal adhesion plaques. We have found, however, that the accessibility to the cell-substrate gap at the focal adhesion plaques is limited and therefore a more direct approach was adopted. We have found that cells spreading on a substrate coated with rhodamine-labeled fibronectin progressively removed the underlying protein from the substrate. The removal of fibronectin involved at least two distinct mechanisms. Part of the substrate-associated fibronectin was removed from small areas and displaced toward the cell center. The arrowhead-shaped areas from which fibronectin was removed often coincided with vinculin-rich focal contacts. We observed, however, many areas where focal contacts were found over unperturbed fibronectin carpet, as well as fibronectin-free areas with no overlapping focal contacts. The possibilities that fibronectin is actively displaced from areas of cell-substrate contact, that the focal adhesion plaques are transiently associated with these areas and their implications on the dynamics of cell spreading and locomotion are discussed. The second route of fibronectin removal from the substrate was endocytosis. The rhodamine-labeled fibronectin was found in the cells in a partial or transient association with clathrin-containing structures.     

Cellular growth control: properties of a unique adhering derivative of L5178Y cells

A new cell line derived from L5178Y murine lymphoma cells with unique properties is described. The cells, L5178Y Adh, grow simultaneously in suspension culture and attached to a substratum but not in contact with each other. Limitation of growth of the cells in either the suspended state or attached to substratum is not linked to a limiting surface or cell density in a manner analogous to “contact inhibition.” The adhering and non-adhering cells grow with different doubling times. Cell size analysis indicates that initial gravity settling of the inoculum determines which cells attach. Contact of these cells' external surface with substratum may then initiate events which ensure attachment of adhering populations.     

Requirement for diacylglycerol and protein kinase C in HeLa cell-substratum adhesion and their feedback amplification of arachidonic acid production for optimum cell spreading.

Release of arachidonic acid (AA) and subsequent formation of a lipoxygenase (LOX) metabolite(s) is an obligatory signal to induce spreading of HeLa cells on a gelatin substratum (Chun and Jacobson, 1992). This study characterizes signaling pathways that follow the LOX metabolite(s) formation. Levels of diacylglycerol (DG) increase upon attachment and before cell spreading on a gelatin substratum. DG production and cell spreading are insignificant when phospholipase A2 (PLA2) or LOX is blocked. In contrast, when cells in suspension where PLA2 activity is not stimulated are treated with exogenous AA, DG production is turned on, and inhibition of LOX turns it off. This indicates that the formation of a LOX metabolite(s) from AA released during cell attachment induces the production of DG. Consistent with the DG production is the activation of protein kinase C (PKC) which, as with AA and DG, occurs upon attachment and before cell spreading. Inhibition of AA release and subsequent DG production blocks both PKC activation and cell spreading. Cell spreading is also blocked by the inhibition of PKC with calphostin C or sphingosine. The inhibition of cell spreading induced by blocking AA release is reversed by the direct activation of PKC with phorbol ester. However, the inhibition of cell spreading induced by PKC inhibition is not reversed by exogenously applied AA. In addition, inhibition of PKC does not block AA release and DG production. The data indicate that there is a sequence of events triggered by HeLa cell attachment to a gelatin substratum that leads to the initiation of cell spreading: AA release, a LOX metabolite(s) formation, DG production, and PKC activation. The data also provide evidence indicating that HeLa cell spreading is a cyclic feedback amplification process centered on the production of AA, which is the first messenger produced in the sequence of messengers initiating cell spreading. Both DG and PKC activity that are increased during HeLa cell attachment to a gelatin substratum appear to be involved. DG not only activates PKC, which is essential for cell spreading, but is also hydrolyzed to AA. PKC, which is initially activated as consequence of AA production, also increases more AA production by activating PLA2.     

The relative importance of topography and RGD ligand density for endothelial cell adhesion

The morphology and function of endothelial cells depends on the physical and chemical characteristics of the extracellular environment. Here, we designed silicon surfaces on which topographical features and surface densities of the integrin binding peptide arginine-glycine-aspartic acid (RGD) could be independently controlled. We used these surfaces to investigate the relative importance of the surface chemistry of ligand presentation versus surface topography in endothelial cell adhesion. We compared cell adhesion, spreading and migration on surfaces with nano- to micro-scaled pyramids and average densities of 6×10(2)-6×10(11) RGD/mm(2). We found that fewer cells adhered onto rough than flat surfaces and that the optimal average RGD density for cell adhesion was 6×10(5) RGD/mm(2) on flat surfaces and substrata with nano-scaled roughness. Only on surfaces with micro-scaled pyramids did the topography hinder cell migration and a lower average RGD density was optimal for adhesion. In contrast, cell spreading was greatest on surfaces with 6×10(8) RGD/mm(2) irrespectively of presence of feature and their size. In summary, our data suggest that the size of pyramids predominately control the number of endothelial cells that adhere to the substratum but the average RGD density governs the degree of cell spreading and length of focal adhesion within adherent cells. The data points towards a two-step model of cell adhesion: the initial contact of cells with a substratum may be guided by the topography while the engagement of cell surface receptors is predominately controlled by the surface chemistry.     

Spreading of normal and transformed fibroblasts in dense cultures

Cell spreading in dense cultures of normal mouse embryo fibroblasts and of the two lines of mouse transformed fibroblasts was examined by electron microscopy. The mean number of cell layers in culture and cell population density per unit area of the substrate were detetmined; the mean area of the cell projection on the substratum was found from these data.Normal fibroblasts formed multilayefed sheet in dense culture. The cells in this sheet were well-spread. These cells formed thin lamellae (lamellar cytoplasm) over the surface of other cells and over the intercellular substance. The mean cell area in dense culture was not smaller than that of the cell spread on the substratum in sparse culture.Dense cultures of two transformed lines (M 22 and L) had differing morphologies: cultures of one line (M 22) were multilayered, those of the other line (L) were monolayered. Decreased spreading and almost complete (M 22) or complete (L) absence of lamellar cytoplasm were characteristic of both transformed lines. The mean area of the cell in dense cultures of both lines was several times smaller than that of their normal progenitors.It is concluded that similar reactions leading to the spreading accompanied by the formation of lamellar cytoplasm can be induced by the contact of fibroblast with various surfaces: that of the substratum in sparse culture, that of other cells and of intercellular structures in dense culture. Deficiency of these reactions characteristic for transformed fibroblasts may be responsible for abnormal morphology of their cultures.     

Modulation of survival and proliferation of BSC-1 cells through changes in spreading behavior caused by the tumor-promoting phorbol ester TPA

The effect of a tumor-promoting phorbol ester on spreading behavior was investigated to clarify the involvement of the interactions between cells and substratum in the maintenance of cell viability and the control of cell proliferation. BSC-1 cells did not spread and lost cell viability after a 24-h incubation in the absence of calf serum. Addition of calf serum initially induced radial spreading and then polarized spreading, with the formation on stress fibers and focal contact-like structure, and enhanced survival. Vitronectin also induced both radial spreading and polarized spreading, and enhanced cell survival. 12-O-Tetradecanoylphorbol-13-acetate (TPA) induced radial spreading with actin ribbons in the absence of serum. It improved the survival of cells attached to the substratum, but not in suspension. TPA suppressed polarized spreading, formation of stress fibers and of focal contact-like structure, and cell proliferation, in the presence of serum. Phorbol did not have any effect. These results suggest that enhancement of radial spreading and inhibition of polarized spreading of BSC-1 cells by TPA are closely related to the enhancement of cell survival and inhibition of cell growth.     

Microexudates from Cells Grown in Tissue Culture

Cellular substrata of known molecular structure and measurable dimensions can be constructed as transferred films from Langmuir troughs or as adsorbed films. In addition, large molecules in culture media form measurable adsorbates. With the techniques of ellipsometry and surface chemistry it is possible to characterize and measure (within ± 3A) as a function of several parameters a microexudate of molecular dimensions deposited when tissue cultured cells contact certain substrata. The selective attraction of substratum and cell for microexudate has been determined, and the time course of deposition in Eagle's medium is characterized by a rapid initial accretion of material. During this period, microexudate can diffuse several cell diameters and cannot be detected in the culture medium. In Eagle's medium the cells cannot be detached from glass surfaces by versene or trypsin unless the surface of cell or substratum is coated with certain molecules. Trypsin becomes adsorbed to cell surfaces, continues to be enzymatically active on the surface, and digests protein components of microexudate and substratum. Microexudate appears to be a complex mosaic of molecules (including protein) synthesized within or on the surfaces of cells and secreted by cells or transferred from their surfaces to specific substrata. It is proposed that this mosaic plays, on the molecular level, a significant role in cell-to-cell interactions, cell locomotion and adhesion, and the selective application and spreading of cells on various surfaces.     

Thermodynamic aspects of cell spreading on solid substrata

To verify the validity of thermodynamic approaches to the prediction of cellular behavior, cell spreading of three different cell types on solid substrata was determined in vitro. Solid substrata as well as cell types were selected on the basis of their surface free energies, calculated from contact angle measurements. The surface free energies of the solid substrata ranged from 18-116 erg cm-2. To measure contact angles on cells, a technique was developed in which a multilayer of cells was deposited on a filter and air dried. Cell surface free energies ranged from 60 erg cm-2 for fibroblasts, and 57 for smooth muscle cells, to 91 for HeLa epithelial cells. After adsorption of serum proteins, cell surface free energies of all three cell types converged to approx 74 erg cm-2. The spreading of these cell types from RPMI 1640 medium on the various solid substrata showed that both in the presence and in the absence of serum proteins in the medium, cells spread poorly on low energy substrata (Ys less than 50 erg cm-2), whereas good cell spreading was observed on the higher energy substrata. Calculations of the interfacial free energy of adhesion (delta Fadh) show that delta Fadh decreases with increasing Ys, and equals zero around 45 erg cm-2 for all three cell types in the presence of serum proteins and for HeLa epithelium cells in the absence of serum proteins. This explains the spreading of these cells on the various substrata upon a thermodynamic basis. The results clearly show that substratum surface free energy has a predictive value with respect to cell spreading in vitro, both in the presence and absence of serum proteins. It is noted, however, that interfacial thermodynamics fail to explain the behavior of fibroblasts and smooth muscle cells in the absence of serum proteins, most likely because of the relatively high surface charges of these two cell types.