The DNA polymerase III holoenzyme: an asymmetric dimeric replicative complex with leading and lagging strand polymerases.

The DNA Polymerase III holoenzyme forms initiation complexes on primed DNA in an ATP-dependent reaction. We demonstrate that the nonhydrolyzable ATP analog, ATP gamma S, supports the formation of an isolable leading strand complex that loads and replicates the lagging strand only in the presence of ATP, beta, and the single-stranded DNA binding protein. The single endogenous DnaX complex within DNA polymerase III holoenzyme assembles beta onto both the leading and lagging strand polymerases by an ordered mechanism. The dimeric replication complex disassembles in the opposite order from which it assembled. Upon ATP gamma S-induced dissociation, the leading strand polymerase is refractory to disassembly allowing cycling to occur exclusively on the lagging strand. These results establish holoenzyme as an intrinsic asymmetric dimer with distinguishable leading and lagging strand polymerases.     

Fluorescence energy transfer between the primer and the beta subunit of the DNA polymerase III holoenzyme.

We report here our initial success in using fluorescence energy transfer to map the position of the subunits of the DNA polymerase III holoenzyme within initiation complexes formed on primed DNA. Using primers containing a fluorescent derivative 3 nucleotides from the 3'-terminus and acceptors of fluorescence energy transfer located on Cys333 of the beta subunit, a donor-acceptor distance of 65 A was measured. Coupling this distance with other information enabled us to propose a model for the positioning of beta within initiation complexes. Examination of the fluorescence properties of a labeled primer with the unlabeled beta subunit and other assemblies of DNA polymerase III holoenzyme subunits allowed us to distinguish all of the known intermediates of the holoenzyme-catalyzed reaction. Specific fluorescence changes could be assigned for primer annealing, Escherichia coli single-stranded DNA-binding protein binding, 3'----5' exonucleolytic hydrolysis of the primer, DNA polymerase III* binding, initiation complex formation upon the addition of beta in the presence of ATP, and DNA elongation. These fluorescence changes are sufficiently large to support future detailed kinetic studies. Particularly interesting was the difference in fluorescence changes accompanying initiation complex formation as compared to binding of DNA polymerase III holoenzyme subunit assemblies. Initiation complex formation resulted in a strong fluorescence enhancement. Binding of DNA polymerase III* led to a fluorescence quenching, and transfer of beta to primed DNA by the gamma delta complex did not change the fluorescence. This demonstrates a rearrangement of subunits accompanying initiation complex formation. Monitoring fluorescence changes with labeled beta, we have determined that beta binds with a stoichiometry of one monomer/primer terminus.     

Adenosine 5'-O-(3-thiotriphosphate) can support the formation of an initiation complex between the DNA polymerase III holoenzyme and primed DNA

Adenosine 5'-O-(3-thiotriphosphate) (ATP gamma S) will substitute for ATP in the formation of an initiation complex between the DNA polymerase III holoenzyme of Escherichia coli and primed DNA. The initiation complex formed in the presence of ATP gamma S between the DNA polymerase III holoenzyme and single-stranded DNA-binding protein-encoated primed M13 Gori DNA is stabile and isolable by gel filtration at room temperature. Upon addition of the four required deoxynucleoside triphosphates, this complex is rapidly converted to the duplex replicative form without dissociation of the polymerase. Initiation complexes formed in the presence of either ATP gamma S or ATP are indistinguishable by their resistance to antibody directed against the beta subunit of the holoenzyme and by their ability to elongate without further activation. A 2-fold difference was observed, however, in both the extent of initiation complex formation and in the dissociation of initiation complexes once formed. This difference is discussed in the light of previous proposals regarding a dimeric polymerase capable of replicating both strands at a replication fork concurrently.     

ATP activation of DNA polymerase III holoenzyme of Escherichia coli. I. ATP-dependent formation of an initiation complex with a primed template

ATP (or dATP) stimulates DNA synthesis by DNA polymerase III holoenzyme (holoenzyme) on the synthetic template-primer poly(dA).oligo(dT)12. Nonhydrolyzable ATP analogs and other natural (deoxy)ribonucleoside triphosphates are inactive. Because the nonhydrolyzable analog 5'-deoxyadenylylimidodiphosphate is efficiently used by holoenzyme for incorporation, the ATP (or dATP) requirement for activation of replication of natural DNA could be determined. Analysis of lag times in DNA synthesis and isolation of intermediates showed that ATP (or dATP) is required in the formation of an initiation complex between holoenzyme and primed DNA template, but not for subsequent DNA synthesis. ATP is bound to holoenzyme in the absence of DNA with a KD value of 0.8 microM; 2 to 3 molecules of ATP per molecule of holoenzyme are bound without apparent cooperativity. Binding of ATP to DNA polymerase III (holoenzyme minus beta subunit) is weak (KD greater than 5 microM) and binding to the beta subunit alone is not observed. However, holoenzyme reconstituted by mixing DNA polymerase III with beta subunit binds ATP as tightly (KD = 0.6 microM) as the original holoenzyme.     

ATP activation of DNA polymerase III holoenzyme from Escherichia coli. II. Initiation complex: stoichiometry and reactivity

DNA polymerase III holoenzyme (holenzyme) has an ATPase activity elicited only by a primed DNA template. Reaction of preformed ATP.holoenzyme complex with a primed template results in hydrolysis of the ATP bound to the holoenzyme, release of ADP and Pi, and formation of an initiation complex between holoenzyme and the primed template. Approximately two ATP molecules are hydrolyzed for each initiation complex formed, a value in keeping with the number bound in the ATP.holoenzyme complex. The possibility that the latter and the initiation complex contain two holoenzyme molecules is supported by the presence of two beta monomers in the initiation complex. Holoenzyme action in the absence of ATP resembles that of pol III (the holoenzyme core) or DNA polymerase III (holoenzyme lacking the beta subunit), with or without ATP, in sensitivity to salt and in processivity of elongation. The initiation complex formed by ATP-activated holoenzyme resists a level of KCl (150 mM) that completely inhibits nonactivated holoenzyme and the incomplete forms of the holoenzyme, and displays a processivity at least 20 times greater. Upon completing replication of available template, holoenzyme can dissociate and form an initiation complex with another primed template, provided ATP is available to reactivate the holoenzyme. By inference, no essential subunits are lost in the cycle of initiation, elongation and dissociation.     

Proofreading activity of DNA polymerase III responds like elongation activity to auxiliary subunits

A comparison of the 3'----5' proofreading properties between Escherichia coli DNA polymerase III holoenzyme and DNA polymerase III' was conducted. This study indicated that the influence of the holoenzyme auxiliary subunits on the proofreading exonuclease parallels their effect on the elongation reaction. At physiological ionic strengths the auxiliary subunits markedly stimulated the exonuclease rate in an ATP-dependent reaction, while the exonuclease rate of DNA polymerase III' was not affected by ATP. E. coli single-stranded DNA binding protein stimulated the 3'----5' exonuclease activity of holoenzyme and inhibited DNA polymerase III'. Similarly, the auxiliary subunits and ATP converted the proofreading activity to a highly processive exonuclease. Our observation, that the exonuclease activity of the DNA polymerase III holoenzyme responded to ATP, salt, and E. coli single-stranded DNA-binding protein like the elongation activity, is consistent with the polymerase and exonuclease subunits acting within the same complex in a coordinated reaction.     

Properties of initiation complexes formed between Escherichia coli DNA polymerase III holoenzyme and primed DNA in the absence of ATP

In the presence of ATP, the beta subunit of the Escherichia coli DNA polymerase III holoenzyme can induce a stable initiation complex with the other holoenzyme subunits and primed DNA that is capable of highly processive synthesis. We have recently demonstrated that the ATP requirement for processive synthesis can be bypassed by an excess of the beta subunit (Crute, J., LaDuca, R., Johanson, K., McHenry, C., and Bambara, R. (1983) J. Biol. Chem. 258, 11344-11349). To examine the complex formed with excess beta subunit, and the lengths of the products of processive synthesis, we have designed a uniquely primed DNA template. Poly(dA)4000 was tailed with dCTP by terminal deoxynucleotidyl transferase and the resulting template annealed to oligo(dG)12-18. In the presence of excess beta, the lengths of processively extended primers nearly equaled the full-length of the DNA template. Similar length synthesis occurred in the presence or absence of spermidine or single-stranded DNA-binding protein. When the beta subunit was present at normal holoenzyme stoichiometry it could induce highly processive synthesis without ATP, although inefficiently. Both ATP and excess beta increased the amount of initiation complex formation, but complexes produced with excess beta did so without the time delay observed with ATP, suggesting different mechanisms for formation. Almost 50% of initiation complexes formed without ATP survived a 30-min incubation with anti-beta IgG, reflecting a stability similar to those formed with ATP. The ability to form initiation complexes in the absence of ATP permitted the demonstration that cycling of the holoenzyme to a new primer, after chain termination with a dideoxynucleotide, is not affected by the presence of ATP.     

Analysis of the ATPase subassembly which initiates processive DNA synthesis by DNA polymerase III holoenzyme.

The gamma complex (gamma delta delta' chi psi) subassembly of DNA polymerase III holoenzyme transfers the beta subunit onto primed DNA in a reaction which requires ATP hydrolysis. Once on DNA, beta is a "sliding clamp" which tethers the polymerase to DNA for highly processive synthesis. We have examined beta and the gamma complex to identify which subunit(s) hydrolyzes ATP. We find the gamma complex is a DNA dependent ATPase. The beta subunit, which lacks ATPase activity, enhances the gamma complex ATPase when primed DNA is used as an effector. Hence, the gamma complex recognizes DNA and couples ATP hydrolysis to clamp beta onto primed DNA. Study of gamma complex subunits showed no single subunit contained significant ATPase activity. However, the heterodimers, gamma delta and gamma delta', were both DNA-dependent ATPases. Only the gamma delta ATPase was stimulated by beta and was functional in transferring the beta from solution to primed DNA. Similarity in ATPase activity of DNA polymerase III holoenzyme accessory proteins to accessory proteins of phage T4 DNA polymerase and mammalian DNA polymerase delta suggests the basic strategy of chromosome duplication has been conserved throughout evolution.     

The beta subunit dissociates readily from the Escherichia coli DNA polymerase III holoenzyme

Purified DNA polymerase III holoenzyme (holoenzyme) was separated by glycerol gradient sedimentation into the beta subunit and the subassembly that lacks it (pol III). In the presence of ATP, beta subunit dimer dissociated from holoenzyme with a KD of 1 nM; in the absence of ATP, the KD was greater than 5 nM. The beta subunit was known to remain tightly associated in the holoenzyme upon formation of an initiation complex with a primed template and during the course of replication. With separation from the template, holoenzyme dissociated into beta and pol III. Cycling to a new template depended on the reformation of holoenzyme. Holoenzyme was in equilibrium with pol III and the beta subunit in crude enzyme fractions as well as in pure preparations.     

Dynamics of termination during in vitro replication of ultraviolet-irradiated DNA with DNA polymerase III holoenzyme of Escherichia coli

During in vitro replication of UV-irradiated single-stranded DNA with Escherichia coli DNA polymerase III holoenzyme termination frequently occurs at pyrimidine photodimers. The termination stage is dynamic and characterized by at least three different events: repeated dissociation-reinitiation cycles of the polymerase at the blocked termini; extensive hydrolysis of ATP to ADP and inorganic phosphate; turnover of dNTPs into dNMP. The reinitiation events are nonproductive and are not followed by further elongation. The turnover of dNTPs into dNMPs is likely to result from repeated cycles of insertion of dNMP residues opposite the blocking lesions followed by their excision by the 3'----5' exonucleolytic activity of the polymerase. Although all dNTPs are turned over, there is a preference for dATP, indicating that DNA polymerase III holoenzyme has a preference for inserting a dAMP residue opposite blocking pyrimidine photodimers. We suggest that the inability of the polymerase to bypass photodimers during termination is due to the formation of defective initiation-like complexes with reduced stability at the blocked termini.     

Saccharomyces cerevisiae replication factor C. II. Formation and activity of complexes with the proliferating cell nuclear antigen and with DNA polymerases delta and epsilon.

Lag times in DNA synthesis by DNA polymerase delta holoenzyme were due to ATP-mediated formation of an initiation complex on the primed DNA by the polymerase with the proliferating cell nuclear antigen (PCNA) and replication factor C (RF-C). Lag time analysis showed that high affinity binding of RF-C to the primer terminus required PCNA and that this complex was recognized by the polymerase. The formation of stable complexes was investigated through their isolation by Bio-Gel A-5m filtration. A stable complex of RF-C and PCNA on primed single-stranded mp18 DNA was isolated when these factors were preincubated with the DNA and with ATP, or, less efficiently with ATP gamma S. These and additional experiments suggest that ATP binding promotes the formation of a labile complex of RF-C with PCNA at the primer terminus, whereas its hydrolysis is required to form a stable complex. Subsequently, DNA polymerase delta binds to either complex in a replication competent fashion without further energy requirement. DNA polymerase epsilon did not associate stably with RF-C and PCNA onto the DNA, but its transient participation with these cofactors into a holoenzyme-like initiation complex was inferred from its kinetic properties and replication product analysis. The kinetics of the elongation phase at 30 degrees, 110 nucleotides/s by DNA polymerase delta holoenzyme and 50 nucleotides/s by DNA polymerase epsilon holoenzyme, are in agreement with in vivo rates of replication fork movement in yeast. A model for the eukaryotic replication fork involving both DNA polymerase delta and epsilon is proposed.     

A model for Escherichia coli DNA polymerase III holoenzyme assembly at primer/template ends. DNA triggers a change in binding specificity of the gamma complex clamp loader

The gamma complex of the Escherichia coli DNA polymerase III holoenzyme assembles the beta sliding clamp onto DNA in an ATP hydrolysis-driven reaction. Interactions between gamma complex and primer/template DNA are investigated using fluorescence depolarization to measure binding of gamma complex to different DNA substrates under steady-state and presteady-state conditions. Surprisingly, gamma complex has a much higher affinity for single-stranded DNA (K(d) in the nM range) than for a primed template (K(d) in the microM range) under steady-state conditions. However, when examined on a millisecond time scale, we find that gamma complex initially binds very rapidly and with high affinity to primer/template DNA but is converted subsequently to a much lower affinity DNA binding state. Presteady-state data reveals an effective dissociation constant of 1.5 nM for the initial binding of gamma complex to DNA and a dissociation constant of 5.7 microM for the low affinity DNA binding state. Experiments using nonhydrolyzable ATPgammaS show that ATP binding converts gamma complex from a low affinity "inactive" to high affinity "active" DNA binding state while ATP hydrolysis has the reverse effect, thus allowing cycling between active and inactive DNA binding forms at steady-state. We propose that a DNA-triggered switch between active and inactive states of gamma complex provides a two-tiered mechanism enabling gamma complex to recognize primed template sites and load beta, while preventing gamma complex from competing with DNA polymerase III core for binding a newly loaded beta.DNA complex.     

Dynamics of DNA polymerase III holoenzyme of Escherichia coli in replication of a multiprimed template

Movements of DNA polymerase III holoenzyme (holoenzyme) in replicating a template multiprimed with synthetic pentadecadeoxynucleotides (15-mers) annealed at known positions on a single-stranded circular or linear DNA have been analyzed. After extension of one 15-mer on a multiprimed template, holoenzyme moves downstream in the direction of chain elongation to the next primer. Holoenzyme readily traverses a duplex, even 400 base pairs long, to exploit its 3'-hydroxyl end as the next available primer. This downstream polarity likely results from an inability to diffuse upstream along single-stranded DNA. These holoenzyme movements, unlike formation of the initial complex with a primer, do not require ATP. Time elapsed between completion of a chain and initiation on the next downstream primer is rapid (1 s or less); dissociation of holoenzyme to form a complex with another primed template is slow (1-2 min). Thus, holoenzyme diffuses rapidly only on duplex DNA, probably in both directions, and forms an initiation complex with the first primer encountered. Based on these findings, schemes can be considered for holoenzyme action at the replication fork of a duplex chromosome.     

DNA Polymerase α Subunit Residues and Interactions Required for Efficient Initiation Complex Formation Identified by a Genetic Selection

Biophysical and structural studies have defined many of the interactions that occur between individual components or subassemblies of the bacterial replicase, DNA polymerase III holoenzyme (Pol III HE). Here, we extended our knowledge of residues and interactions that are important for the first step of the replicase reaction: the ATP-dependent formation of an initiation complex between the Pol III HE and primed DNA. We exploited a genetic selection using a dominant negative variant of the polymerase catalytic subunit that can effectively compete with wild-type Pol III α and form initiation complexes, but cannot elongate. Suppression of the dominant negative phenotype was achieved by secondary mutations that were ineffective in initiation complex formation. The corresponding proteins were purified and characterized. One class of mutant mapped to the PHP domain of Pol III α, ablating interaction with the ϵ proofreading subunit and distorting the polymerase active site in the adjacent polymerase domain. Another class of mutation, found near the C terminus, interfered with τ binding. A third class mapped within the known β-binding domain, decreasing interaction with the β₂ processivity factor. Surprisingly, mutations within the β binding domain also ablated interaction with τ, suggesting a larger τ binding site than previously recognized.     

DNA polymerase III holoenzyme from Thermus thermophilus identification, expression, purification of components, and use to reconstitute a processive replicase

DNA replication in bacteria is performed by a specialized multicomponent replicase, the DNA polymerase III holoenzyme, that consist of three essential components: a polymerase, the beta sliding clamp processivity factor, and the DnaX complex clamp-loader. We report here the assembly of the minimal functional holoenzyme from Thermus thermophilus (Tth), an extreme thermophile. The minimal holoenzyme consists of alpha (pol III catalytic subunit), beta (sliding clamp processivity factor), and the essential DnaX (tau/gamma), delta and delta' components of the DnaX complex. We show with purified recombinant proteins that these five components are required for rapid and processive DNA synthesis on long single-stranded DNA templates. Subunit interactions known to occur in DNA polymerase III holoenzyme from mesophilic bacteria including delta-delta' interaction, deltadelta'-tau/gamma complex formation, and alpha-tau interaction, also occur within the Tth enzyme. As in mesophilic holoenzymes, in the presence of a primed DNA template, these subunits assemble into a stable initiation complex in an ATP-dependent manner. However, in contrast to replicative polymerases from mesophilic bacteria, Tth holoenzyme is efficient only at temperatures above 50 degrees C, both with regard to initiation complex formation and processive DNA synthesis. The minimal Tth DNA polymerase III holoenzyme displays an elongation rate of 350 bp/s at 72 degrees C and a processivity of greater than 8.6 kilobases, the length of the template that is fully replicated after a single association event.     

The DNA polymerase-primase from drosophila melanogaster embryos. Rate and fidelity of polymerization on single-stranded DNA templates

The DNA polymerase activity of the near homogeneous, multisubunit DNA polymerase-primase from Drosophila melanogaster embryos has been compared to Escherichia coli DNA polymerase III core, DNA polymerase III, and DNA polymerase III holoenzyme. The rate of deoxynucleotide incorporation by the Drosophila polymerase on singly primed phi X174 DNA is similar to that observed with equivalent levels of DNA polymerase III holoenzyme in the absence of E. coli single-stranded DNA binding protein. However, analysis of the DNA products indicates that the Drosophila polymerase is less processive than DNA polymerase III holoenzyme, and closely resembles DNA polymerase III. The Drosophila polymerase-primase contains neither 3'-5' exonuclease nor RNase H-like activities, and catalyzes no significant pyrophosphate exchange. There is a low level of DNA-dependent ATPase activity which can be eliminated by a second glycerol gradient sedimentation (Kaguni, L.S., Rossignol, J.-M., Conaway, R.C., and Lehman, I.R. (1983) Proc. Natl. Acad. Sci. U. S. A. 80, 2221-2225). Although lacking a 3'-5' exonuclease, the replication fidelity of the D. melanogaster polymerase is similar to that of E. coli DNA polymerase III holoenzyme which possesses such an activity.     

Accessory proteins bind a primed template and mediate rapid cycling of DNA polymerase III holoenzyme from Escherichia coli

DNA polymerase III holoenzyme was assembled from pure proteins onto a primer template scaffold. The assembly process could be divided into two stages. In the time-consuming first stage, beta subunit and gamma.delta subunit complex were required in forming a tightly bound ATP-activated "preinitiation complex" with a single-stranded DNA bacteriophage circle uniquely primed with a synthetic pentadecadeoxyribonucleotide. This finding substantiates an earlier study using crude protein preparations in a homopolymer system lacking Escherichia coli single-stranded DNA binding protein (Wickner, S. (1976) Proc. Natl. Acad. Sci. U. S. A. 73, 3511-3515). In the second stage, the polymerase III core and the tau subunit rapidly seek out and bind the preinitiation complex to form DNA polymerase III holoenzyme capable of rapid and entirely processive replication of the circular DNA. ATP is not required beyond formation of the preinitiation complex. It is remarkable that the fully assembled DNA polymerase III holoenzyme is so stably bound to the primed DNA circle (4-min half-time of dissociation), yet upon completing a round of synthesis the polymerase cycles within 10 s to a new preinitiation complex on a challenge primed DNA circle. Efficient polymerase cycling only occurred when challenge primed DNA was endowed with a preinitiation complex implying that cycling is mediated by a polymerase subassembly which dissociates from its accessory proteins and associates with a new preinitiation complex. These subunit dynamics suggest mechanisms for polymerase cycling on the lagging strand of replication forks in a growing chromosome.     

The beta subunit of the Escherichia coli DNA polymerase III holoenzyme interacts functionally with the catalytic core in the absence of other subunits

We have previously demonstrated that the addition of a stoichiometric excess of the beta subunit of Escherichia coli DNA polymerase III holoenzyme to DNA polymerase III or holoenzyme itself can lead to an ATP-independent increase in the processivity of these enzyme forms (Crute, J. J., LaDuca, R. J., Johanson, K. O., McHenry, C. S., and Bambara, R. A. (1983) J. Biol. Chem. 258, 11344-11349). Here, we show that the beta subunit can interact directly with the catalytic core of the holoenzyme, DNA polymerase III, generating a new form of the enzyme with enhanced catalytic and processive capabilities. The addition of saturating levels of the beta subunit to the core DNA polymerase III enzyme results in as much as a 7-fold stimulation of synthetic activity. Two populations of DNA products were generated by the DNA polymerase III X beta enzyme complex. Short products resulting from the addition of 5-10 nucleotides/primer fragment were generated by DNA polymerase III in the presence and absence of added beta subunit. A second population of much longer products was generated only in beta-supplemented DNA polymerase III reactions. The DNA polymerase III-beta reaction was inhibited by single-stranded DNA binding protein and was unaffected by ATP, distinguishing it from the holoenzyme-catalyzed reaction. Complex formation of the DNA polymerase III core enzyme with beta increased the residence time of the enzyme on synthetic DNA templates. Our results demonstrate that the beta stimulation of DNA polymerase III can be attributed to a more efficient and highly processive elongation capability of the DNA polymerase III X beta complex. They also prove that at least part of beta's normal contribution to the DNA polymerase III holoenzyme reaction takes place through interaction with DNA polymerase III core enzyme components to produce the essential complex necessary for efficient elongation in vivo.