Anticarcinogenic Reactivity of Copper-Dischiffbases with Superoxide Dismutase-Like Activity

CuPu(Py)₂ and CuPu(Im)₂, two novel dischiffbase coordinated low Mr active centre analogues of Cu_{2, Zn2} superoxide dismutase, were shown to effectively catalyze the production of hydroxyl radicals in the presence and absence of TPA activated polymorphonuclear leukocytes. These stable copper chelates exhibited a pronounced anticarcinogenic reactivity in male Sprague Dawley rats implanted with Walker 256 carcinosarcoma cells. When four doses of 5°mol/kg CuPu(Py)₂ and CuPu(Im)₂, respectively, were administered intratumorally, reduction in tumor size, delay of metastasis and a significant increase in survival of the hosts were observed, resulting in 75% of total remissions. 60% of the animals recovered totally from the carcinosarcoma, when CuPu(Py)₂ was applicated intravenously.     

Ruthenium complexes containing tertiary phosphines and imidazole or 2,2′-bipyridine ligands

Complexes RuCl₃(PPh₃)L₂ (L = MeIm (1a, Im (1b)) and [RuCl₂(PPh₃)₂(bipy)]Cl·4H₂O (2) have been synthesized via the ruthenium(III) precursor RuCl₃(PPh₃)₂ (DMA), and characterized, including an X-ray structural analysis for 1a (MeIm = N-methylimidazole, Im = imidazole, bipy = 2,2′-bipyridyl, and DMA = N, N′-dimethylacetamide). Crystals of 1a are monoclinic, space group P2₁/n, A = 10.5491(5), B = 20.4934(9), C = 12.8285(4) Å, β = 90.166(4)°, Z = 4. The structure, which reveals a mer configuration for the chlorides, and cis-methylimidazoles, was solved by conventional heavy atom methods and was refined by full-matrix least-square procedures to R = 0.041 and R_w = 0.042 for 3328 reflections with I 3σ(I). From the RuCl₂(PPh₃)₃ precursor, the ruthenium(II) complexes RuCl₂(PPh₃)₂L₂ and [RuCl(PPh₃)L₄]Cl have been made (L = Im or MeIm), while [RuCl(dppb)Im₃]Cl has been made from [RuCl₂(dppb)]₂(μ-dppb) (dppb = Ph₂P(CH₂)₄PPh₂).     

Single-crystal EPR studies of a spin-frustrated imidazolate-bridged trinuclear copper(II) complex

The single-crystal and polycrystalline powder EPR spectra of the trinuclear compound [L₃Cu₃(Im)₃](ClO₄)₃, L = 1,4,7-trimethyl-1,4,7-triazacyclononane, and Im = imidazolate, have been measured in the temperature range 4.2–300 K. The spectra are explained based on the spin-frustration, the low symmetry, and the intercluster exchange interactions.     

Chemiluminescence Assays of Cu2Zn2 Superoxide Dismutase Mimicking Cu-Complexes

The aqueous decay of K₃CrO₈ was used to compare the reactivity of Cu₂Zn₂ superoxide dismutase and two active centre analogues where the first shell atoms around the copper are four unsaturated nitrogens. Unlike the acetate or biuret type Cu(II) chelates these di-Schiff-base complexes had an identical reactivity compared to that of the intact enzyme. Nanomolar concentrations of copper coordinated in these complexes were sufficient to inhibit the K₃CrO₈ induced chemiluminescence by 50%.

Furthermore, a lucigenin amplified chemiluminescence assay based on isolated polymorph nuclear leucocytes in the absence and presence of whole, unseparated blood was developed and successfully employed. CuPu(Im), and CuPu(Py), equivalent to 0.5 and 0.8 SOD units. only, were required to inhibit the photon emission by 50% in the absence of bovine serum albumin. Even in the presence of 600 μM albumin mimicking the competitive copper chelation in biological fluids Cu-Pu(Py)₂ and CuPu(lm)₂ remained active, whereas the carboxylate-and biuret type chelates Cu(Sal)₂ and Cu(Ser)₂ reacted like CuSO₄ The same reactivity of these low M, SOD mimics was seen in human blood.     

The synthesis, structure and SOD-like behaviors of a μ-imidazolato-dicopper(II) complex with a binucleating hexaazamacrocycle

The synthesis, crystal structure and magnetic properties of the imidazolate-bridged dinuclear copper(II) complex [LCu₂(Im)(DMSO)₂](ClO₄)₃(DMSO), where ImH is imidazole, and L is 3, 6, 9, 17, 20, 23-hexaazatricyclo[23.3.1.1^11,13]triaconta-1(29), 11(30), 12, 14, 25(26), 27-hexaene, have been studied. Single crystal X-ray diffraction determination reveals the distorted tetragonal pyramid geometries of the imidazolate bridged dicopper(II) center are incorporated within the binucleating macrocycle. Both copper atoms are five-coordinated by four basal nitrogen atoms (three from the macrocycle and one from the imidazolate) and one oxygen atom from the DMSO molecule. Two coordinated DMSO molecules are situated at the same side of the macrocycle. The Cu–Cu separation in the complex is 5.93 Å. Magnetic measurements and ESR spectroscopy studies exibit an antiferromagnetic exchange interaction with a coupling constant of J= − 26.94 cm⁻¹. Investigations on the pH-dependent ESR of the title compound in frozen 50% aqueous DMSO solution confirm the existence of the bridged cation [LCu₂(Im)]³⁺ as a major species in solution mainly in the range 5.2pH11.5. The imidazolate bridge is broken in the pH range of 5.2–3.3, which is close to that for the native enzyme.     

Chemistry of vinylidene complexes XI. Synthesis of trinuclear MnFePt complexes by means of consecutive assembling out of mono- and dimetal vinylidene precursors

The dimetal μ-vinylidene complexes Cp(CO)₂MnPt(μ-C = CHPh)L₂ (L = tert.-phosphine or -phosphite), which have been obtained by coupling of the mononuclear complex Cp(CO)₂Mn=C=CHPh and unsaturated PtL₂ unit, add smoothly the Fe(CO)₄ moiety to produce trimetal MnFePt compounds. The μ₃-vinylidene cluster CpMnFePt(μ₃-C=CHPh)(CO)₆(PPh₃) was prepared in quantitative yields from the reactions of Cp(CO)₂MnPt(μ-C=CHPh)(PPh₃)L (L = PPh₃ or CO) with Fe₂(CO)₉ in benzene at 20 °C. The phosphite-substituted complexes Cp(CO)₂Mnpt(μ-C=CHPh)L₂ (L = P(OEt)₃ or P(OPrⁱ)₃) react under analogous conditions with Fe₂(CO)₉ to give mixtures (2:3) of the penta- and hexacarbonyl clusters, CpMnFePt(μ₃-C = CHPh)(CO)₅L₂ and CpMnFePt(μ₃-C = CHPh)(CO)₆L, respectively. The similar reaction of the dimetal complex Cp(CO)₂MnPt(μ-C = CHPh)(dppm), in which the Pt atom is chelated by dppm = Ph₂PCH₂PPhPin2 ligand, gives only a 15% yield of the analogous trimetal μ₃-vinylidene hexacarbonyl product CpMnFePt(μ₃-C = CHPh)(CO)(dppm), but the major product (40%) is the tetranuclear μ₄-vinylidene cluster (dppm)PtFe₃(μ₄-C = CHPh)(CO)₉. The IR and ¹H, ¹³C and ³¹P NMR data for the new complexes are reported and discussed.     

The propensity of alkoxide and aryloxide derivatives of tungsten carbonyls to aggregate in solution. Synthesis and X-ray structures of dinuclear, trinuclear and tetranuclear complexes derived from the MeOW(CO)5 anion

The complex [Et₄N][W(CO)₅OMe] (1) has been prepared from the reaction of the photochemically generated W(CO)₅THF adduct and [Et₄N][OH] in methanol. Complex 1 was shown to undergo rapid CO dissociation in THF to quantitatively provide the dimeric dianion, [W(CO)₄OMe]₂²⁻. The resulting THF insoluble salt [Et₄N]₂[W(CO)₄OMe]₂ (2) has been structurally characterized by X-ray crystallography, with the doubly bridging methoxide ligands being in an anti configuration. Complex 2 was found to subsequently react with excess methoxide ligand in a THF slurry to afford the face-sharing octahedron complex [Et₄N]₃[W₂(CO)₆(OMe)₃] (3) which contains three doubly bridging methoxide groups. In the absence of excess methoxide ligand complex 2 cleanly yields the tetrameric complex [Et₄N]₄[W(CO)₃OMe]₄ (4) which has been structurally characterized as a cubane-like arrangement with triply bridging μ³-methoxide groups and W(CO)₃ units. Although complex 3 was not characterized in the solid state, the closely related glycolate derivative [Et₄N]₃[W₂(CO)₆(OCH₂CH₂OH)₃] (5) was synthesized and its structure determined by X-ray crystallography. The trianions of complex 5 are linked in the crystal lattice by strong intermolecular hydrogen bonds. Crystal data for 2: space group P2₁/n, a = 7.696(2), b = 22.019(4), c = 9.714(2) Å, β = 92.22(3)°, Z = 4, R = 6.43%. Crystal data for 4: space group Fddd, a = 12.433(9), b = 24.01(2), c = 39.29(3) Å, Z = 8, R = 8.13%. Crystal data for 5: space group P2₁2₁2₁, a = 11.43(2), b = 12.91(1), c = 29.85(6) Å, Z = 8, R = 8.29%. Finally, the rate of CO ligand dissociation in the closely related aryloxide derivatives [Et₄N][W(CO)₅OR] (R = C₆H₅ and 3,5-F₂C₆H₃) were measured to be 2.15 × 10⁻² and 1.31 × 10⁻³ s⁻¹, respectively, in THF solution at 5°C. Hence, the value of the rate constant of 2.15 × 10⁻² s⁻¹ establishes a lower limit for the first-order rate constant for CO loss in the W(CO)₅OMe⁻ anion, since the methoxide ligand is a better π-donating group than phenoxide.     

Cis- and trans-titanium complexes with doubly silyl-bridged dicyclopentadienyl ligands: molecular structure of [(TiCl)2(μ-O){(SiMe2)2(η-C5H3)2}]2(μ-O)2

The reaction of TiCl₄ with Li₂[(SiMe₂)₂(η⁵-C₅H₃)₂] in toluene at room temperature afforded a mixture of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] in a molar ratio of 1/2 after recrystallization. The complex trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] was hydrolyzed immediately by the addition of water to THF solutions to give trans-[(TiCl₂)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] as a solid insoluble in all organic solvents, whereas hydrolysis of cis-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] under different conditions led to the dinuclear μ-oxo complex cis-[(TiCl₂)₂)(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] and two oxo complexes of the same stoichiometry [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ as crystalline solids. Alkylation of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] with MgCIMe led respectively to the partially alkylated cis-[(TiMe₂Cl)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] and the totally alkylated trans-[(TiMe₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] compounds. The crystal and molecular structure of the tetranuclear oxo complex [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ was determined by X-ray diffraction.     

Mono-η complexes of chromium(II) and chromium(0). Electron demanding substituents, structural and spectroscopic data comparisons

Using thermal and photochemical methods a series of new chromium complexes has been prepared: (ν⁶-p-C₆H₄F₂)Cr(CO)₃; (ν⁶-C₆H₅CF₃)Cr(CO)₃; [m-C₆H₄(CF₃)₂]Cr(CO)₃; (ν⁶-C₆H₅F)Cr(CO)₂H(SiCl₃); (ν⁶-C₆H₅F)Cr(CO)₂(SiCl₃)₂; (p-C₆H₄F₂)Cr(CO)₂-H(SiCl₃); (C₆H₅CF₃)Cr(CO)₂H(SiCl₃(p-C₆H₄F₂)Cr(CO)₂(SiCl₃)₂; C₆H₅CF₃)Cr(CO)₂(SiCl₃)₂; [m-C₆H₄(CF₃)₂]Cr(CO)₂-H(SiCl₃); [m-C₆H₄(CF₃)₂]Cr(CO)₂(SiCl₃)₂. Two compounds were structurally characterized by X-ray diffraction. These data combined with IR and ¹H NMR have allowed assessment of some of the electronic and steric effects. The Cr-arene bond is considerably longer in the Cr(II) derivatives than in the Cr(0) species. Also the Cr center, as might be expected, is less electron rich in the Cr(II) dicarbonyl disilyl derivatives. The ν⁶-p-C₆H₄F₂ ligands are slightly folded so that the C---F carbons are moved further away from the Cr center. Comparison of structural and electronic effects is made with a series of similar chromium compounds reported in the literature. These new (arene)Cr(II) derivatives possess more labile ν⁶-arene ligands, which promise a rich chemistry at the chromium center.     

The interaction of Lewis acidic boron derivatives with Re(CO)5−nH(PMe3)n complexes

Lewis acid adducts of the hydrides cis- and trans-Re(CO)(PMe₃)₄H (1) and (2), mer-Re(CO)₂(PMe₃)₃H (3), fac-Re(CO)₂(PMe₃)₃H (4) and trans-Re(CO)₃(PMe₃)₂H (5) were studied with BH₃ and 9-borabicyclo[3,3,1] norbonane (BBNH). Using BH₃·THF and (BBNH)₂ 1 and 2 afforded Re(CO)(PMe₃)₃(η²-BH₄) (6) and Re(CO)(PMe₃)₃(η²-BBNH₂) (7) as stable and isolable products. VT IR studies established for the reaction to 7 that BBNH first attaches in a pre-equilibrium to the O_CO atom of 1 or 2. At higher temperatures ReH adduct formation occurs with instantaneous transformation to 7 and elimination of PMe₃·BBNH. In a similar way, the hydrides 3 and 4 were converted with BH₃·THF and (BBNH)₂ to yield the stable complexes Re(CO)₂(PMe₃)₂(η²-BH₄) (8) and Re(CO)₂(PMe₃)₂(η²-BBNH₂) (9). The intermediacy of the η¹-BH₄ adducts mer-/fac-Re(CO)₂(PMe₃)₃(η¹-BH₄) was confirmed by VT ¹H, ³¹P NMR and VT IR experiments. The conversion of 5 with BH₃·THF led to equilibria with adducts at the O_CO terminus in trans position to H and with H_Re as revealed by VT IR studies. Temperature dependent ³¹P equilibrium studies allowed to calculate ΔH=−4.9 kcal mol⁻¹ and ΔS=+0.034 e.u. for this reaction. These adducts could not be isolated. Compound 5 does not react with (BBNH)₂ even at elevated temperatures. DFT calculations were carried out to support the structures of the BH₃ adducts of 5. In addition a vibrational analysis helped to unravel the IR band assignments of the involved compounds. DFT calculations on 8 confirmed its C_2v structure. X-ray diffraction studies were carried out on single crystals of 6 and 7.     

Reactivity of cationic carbonyl/phosphine ruthenium(II) compounds

Cis(or trans)-[RuCl₂(CO)₂(PPh₃)₂] react with two and one equivalents of AgBF₄ to give the recently reported [Ru(CO)₂(PPh₃)₂][BF₄]₂·CH₂Cl₂ (1) and novel [RuCl(CO)₂(PPh₃)₂][BF₄] · 1/2 CH₂Cl₂ (2), respectively. Cis-[RuCl₂(CO)₂(PPh₃)₂] also reacts with two equivalents of AgBF₄ in the presence of CO to give [Ru(CO)₃(PPh₃)₂][BF₄]₂ (3). Reactions of 1 and 2 with NaOMe and CO at 1 atm produce the carbomethoxy species [Ru(COOMe)₂(CO)₂(PPh₃)₂] (4) and [RuCl(COOMe)(CO)₂(PPh₃)₂] (5), respectively. Complex 4 can also be formed from the reaction of 3 with NaOMe and CO. Alternatively, 4 is formed from cis-[RuCl₂(CO)₂(PPh₃)₂] with NaOMe and CO at elevated pressure (10 atm); if these reactants are refluxed under 1 atm of CO, [Ru(CO)₃(PPh₃)₂] is the product. The reaction of [RuCl(CO)₃(PPh₃)₂][AlCl₄] with NaOMe provides an alternative route to the preparation of 5, but the product is contaminated with [RuCl₂(CO)₂(PPh₃)₂]. Compounds 1. 2, 4 and 5 have been characterised by IR, ¹H NMR and analysis, whilst the formulation of 3 is proposed from spectroscopic data only. This account also examines the reactivity of [Ru(CO)₂(PPh₃)₂][BF₄]₂ · CH₂Cl₂ with NaBH₄, conc. HCl, KI and, finally, MeCOONa in the presence of CO. The products of these reactions, namely cis-[RuH₂(CO)₂(PPh₃)₂], cis-[RuCl₂(CO)₂(PPh₃)₂], cis-[RuI₂(CO)₂(PPh₃)₂] and [Ru(OOCMe)₂(CO)₂(PPh₃)₂], have been identified by comparison of their spectra with previous literature.     

尿素与磷酸二氢钾配施对板栗光合特性及生长结实的影响

肥料配施可提高肥料利用效率,改善树体营养结构,起到平衡施肥的作用.选取7年生板栗树为试材,采用树干注射的方法,研究尿素和磷酸二氢钾不同配施处理对板栗光合特性及生长结实的影响.结果表明: 尿素和磷酸二氢钾配施具有明显的正向协同效应,二者配施较单一施肥可显著提高板栗光合能力及产量和品质.单施(NH₂)₂CO可降低叶绿素含量,单施KH₂PO₄可增加叶绿素含量,而二者配施使叶绿素含量显著增加.4种配施处理均可提高叶片及枝条的N、P、K含量,其中0.3%(NH₂)₂CO+0.3%KH₂PO₄处理效果最好.不同施肥处理均可改善光合参数,但仍以配施处理为好,其中0.3%(NH₂)₂CO+0.3%KH₂PO₄处理可显著提高光合速率、最大净光合、表观量子效率、羧化效率、瞬时水分利用效率、氮素利用效率.配施可同时促进枝条加长和加粗生长,并提高混合芽数量,而单施(NH₂)₂CO仅能促进加长生长,对提高混合芽数量效果不显著.配施对提高坚果产量和质量效果优于单一施肥,在0.3%(NH₂)₂CO+0.3%KH₂PO₄处理下坚果产量、单粒质量和总糖含量等关键指标较对照分别提高68.2%、25.5%和14.9%.     

Bimetallic cyclooligosiloxanolate complexes of copper and nickel

The bimetallic cyclosiloxanolate cluster complexes Na[PhSiO₂)₆Cu₄Ni₂(μ₆-Cl)(PhSiO₂)₆] (1) and Na[(PhSiO₂)₆Cu₃Ni₃(μ6-Cl)(PhSiO₂)₆] (2) were prepared by Na⁺ and Ni²⁺ ion exchange from in situ generated Na₂ {[(PhSiO₂)₆]₂Na₄Ni₄(OH)₂}. Complexes 1 and 2 were characterized by analytical, spectroscopic and electrochemical methods as well as complex 2 by single-crystal X-ray diffraction. The X-ray structure shows a sandwich-type array comprising two superimposed cyclosiloxanolate rings and an M₆Cl unit in between. For the first time the regioselectivity of the metal ion exchange could be deduced from the X-ray structural parameters.     

Structure and physicochemical properties of barley non-starch polysaccharides—II. Alkaliextractable β-glucans and arabinoxylans

Three fractions containing hemicellulosic material were obtained by sequential extraction of barley residue (left after removal of water-extractable polysaccharides) with saturated barium hydroxide [Ba(OH)₂ fraction], distilled water [Ba(OH)₂/H₂O fraction], and 1 m sodium hydroxide [NaOH fraction]. The yields of the fractions were 1.6, 1.7, and 2.6% (w/w), respectively, of the dry barley grist. The Ba(OH)₂ fraction contained mainly arabinose and xylose, 35.8% and 60.9%, respectively. The Ba(OH)₂/H₂O fraction in addition to 26.7% Ara and 36.6% Xyl contained also 34.8% Glc. The NaOH fraction was composed of 14.2% Ara, 44.0% Xyl, and 40.9% Glc. The Ba(OH)₂/H₂O and NaOH extracts were further fractionated by stepwise (NH₄)₂SO₄ precipitation into several subfractions with varying amounts of β-glucans and arabinoxylans. β-Glucans in Ba(OH)₂/H₂O and NaOH fractions were characterized by high ratios of β-(1→4)/β-(1→3) linkages, large amounts of contiguously linked β-(1→4) segments, and high ratios of cellotriosyl/cellotetraosyl units. The alkali-extractable arabinoxylans, especially those NaOH-extractable, were characterized by a very low degree of substitution, high xylose/arabinose ratio, and a small content of doubly substituted xylose residues. Some populations of arabinoxylans displayed structural features that would enable them to self-associate or to interact with β-glucans.     

Synthesis, structure, and heterogeneous catalytic activity of tungsten chalcogenide cubane cluster containing alkaline earth metal complex

A new compound containing a cubane tungsten chalcogenide cluster [W₄(μ₃-Te)₄(CN)₁₂]⁶⁻ and Ca²⁺ complex units has been prepared by the reaction of aqueous solution of K₆[W₄(μ₃-Te)₄(CN)₁₂] · 5H₂O with the solution of a Ca(NO₃)₂ and phen(1,10-phenanthroline) (1:2 molar ratio) in a solvent mixture of H₂O/EtOH. The structure of [{Ca(phen)₂(H₂O)}{Ca(phen)(H₂O)₄}{Ca(phen)₂(H₂O)₃}][W₄Te₄(CN)₁₂] · 5H₂O 1 has been determined by X-ray crystallography. Compound 1 contains [{Ca(phen)(H₂O)₄}{Ca(phen)₂(H₂O)₃}][W₄(μ₃- Te)₄(CN)₁₂] units bridged by {Ca(phen)₂(H₂O)}²⁺ units to form an one-dimensional zigzag chain structure. Interestingly, compound 1 showed a heterogeneous catalytic activity in the transesterification of a range of esters with methanol under the mild conditions. Moreover, it can be reused without any loss of activity through 10 runs with ester.     

Triphenylbismuth seven-coordinate complexes of molybdenum(II) and tungsten(II)

The seven-coordinate complexes [MI₂(CO)₃(NCMe)₂] (M = Mo and W) react with one equivalent of BiPh₃ in CH₂Cl₂ at room temperature to give the monoacetonitrile complexes [MI₂(CO)₃(NCMe)(BiPh₃)]. The molybdenum complex [MoI₂(CO)₃(NCMe)(BiPh₃)] after stirring in CH₂Cl₂ at room temperature for 5 h affords the iodide-bridged dimer [Mo(μ-I)I(CO)₃(BiPh₃)]₂, whereas the tungsten complex [WI₂(CO)₃(NCMe)(BiPh₃)] does not appear to dimerise even after stirring for 48 h in CH₂Cl₂ at room temperature. Reaction of [MI₂(CO)₃(NCMe)₂] with two equivalents of BiPh₃ gives the bistriphenylbismuth compounds [MI₂(CO)₃(BiPh₃)₂] in good yield. The new mixed ligand complexes [MI₂(CO)₃L(BiPh₃)] were prepared either by reaction of [MI₂(CO)₃(NCMe)(BiPh₃)]in situ with one equivalent of L(L = P(OPh)₃), or an in situ reaction of [MI₂(CO)₃(NCMe)L] (L = PPh₃ and SbPh₃; and L = AsPh₃ and PPh₂Cy (for M = Mo only) with an equimolar quantity of BiPh₃. Reaction of [MoI₂(CO)₃(NCMe)(BiPh₃)] with one equivalent of 2,2′-bipyridyl (bipy) in CH₂Cl₂ at room temperature afforded the cationic complexes [MoI(CO)₃(bipy)(BiPh₃)]I in good yield. The complex [WI₂(CO)₃(NCMe)(BiPh₃)] (prepared in situ) reacts with two equivalents of NaS₂CNMe₂·2H₂O to eventually give the non-triphenylbismuth containing product [W(CO)₃(S₂CNMe₂)₂] in high yield.     

The new enneanuclear nickel carbonyl anion [Ni9(CO)16] and its relationships with the [Ni12(CO)21] and [Ni6Rh3(CO)17] clusters

The reaction of [N(PPh₃)₂]₂[Ni₆(CO)₁₂] with Cu(PPh₃)_xCl (x=1, 2), as well as the degradation of [N(PPh₃)₂]₂[H₂Ni₁₂(CO)₂₁] with PPh₃, affords the new and unstable dark orange–brown [N(PPh₃)₂]₂[Ni₉(CO)₁₆].THF salt in low yields. This salt has been characterized by a CCD X-ray diffraction determination, along with IR spectroscopy and elemental analysis. The close-packed two-layer metal core geometry of the [Ni₉(CO)₁₆]²⁻ dianion is directly related to that of the bimetallic [Ni₆Rh₃(CO)₁₇]³⁻ trianion and may be envisioned to be formally derived from the hcp three-layer geometry of [Ni₁₂(CO)₂₁]⁴⁻ by the substitution of one of the two outer [Ni₃(CO)₃(μ−CO)₃]²⁻ layers with a face-bridging carbonyl group.     

Substitution reaction mechanisms of dihydrido-ruthenium(II) phosphine complexes: hydribe basicity and molecular hydrogen intermediates

Kinetic and activation parameter data for the reactions of cct-Ru(H)₂(CO)₂(PPh₃)₂ (1) (cct = cis, cis, trans) in THF with thiols, CO and PPh₃ to give cct-RuH(SR)(CO)₂(PPh₃)₂, Ru(CO)₃(PPh₃)₂ and Ru(CO)₂(PPh₃)₂, respectively, reveal a common, rate-determining step, the initial dissociation of H₂ from 1; the activated complex probably resembles the corresponding Ru(η²-H₂) species. Reaction of Ru(H)₂(dppm)₂ (2) (as a cis/trans mixture, DPPM = bis(diphenylphosphino)methane) with thiols initially generated cis- and trans- RuH(SR) (dppm)₂ with a rate that depends on both the type and concentration of thiol. The higher basicity of the hydride ligands in 2 (versus 1), which is demonstrated by deuterium exchange with CD₃OD, gives rise in the thiol reaction to an initial protonation step prior to loss of H₂. A species detected in the thiol reaction is possibly [RuH(η²-H₂ (dppm)₂]², the anticipated intermediate for this reaction and for the hydrogen exchange with alcohol. A longer reaction of 2 with PhCH₂SH gives solely cis-Ru(SCH₂Ph)₂(dppm)₂.     

Synthesis and structures of the cuboidal iron-sulfur-nitrosyl-phosphine clusters [Fe4S3(NO)4(PR3)3] (R = Et, Pr, C6H11)

A series of cuboidal iron-sulfur clusters [Fe₄S₃(NO)₄(PR₃)₃]^0,1+ (R = Et, Prⁱ, Cy) were synthesized by two routes: reductive desulfurization of [Fe₄S₄(NO)₄] by tertiary phosphines, and substitution of triphenylphosphine in [Fe₄4S₃(NO)₄(PPh₃)₃] by a more basic phosphine. The structures of 3[Fe₄S₃(NO)₄(PEt₃)₃] · 0.5Et₂O, [Fe₄S₃(NO)₄(PEt₃)₃] [Fe₄S₃(NO)₇] and partially substituted [Fe₄S₃(NO)₄(PPh₃)_2⁻ (PPrⁱ₃)] have been determined by X-ray diffraction in order to define the cuboidal Fe₄S₃ core, previously known only in Roussin's black anion and its reduced form, [Fe₄S₃(NO)₇7]^1−,2−, and as a part of the iron-molybdenum cofactor of nitrogenase.     

Molecular structure and reactions of azobenzene complexes with iron-lithium compounds

Reactions of azobenzene have been studied with heteronuclear iron-lithium compounds formed in the reaction of FeCl₃ with LiPh, one of the dinitrogen reducing systems of the Vol'pin type: Ph₄FeLi₄(OEt₂)₄ (1) and (H₂)FePh₄Li₄(OEt₂)₄ (2). The structures of the azobenzene complexes formed, (N₂Ph₂)₃FeLi₃(OEt₂)₃ (3) and (N₂Ph₂)₃FeLi₂(THF)₂ (4), as well as an ether-containing analog of the latter, (N₂Ph₂)₃FeLi₂(OEt₂)₂ (5), were determined by X-ray analysis of single crystals. Coordination of azobenzene at FeLi₃ and FeLi₂ clusters was shown to result in a sigificant elongation of the NN bond; partial cleavage of this bond on protolysis of the complexes resulted in the formation of hydrazobenzene and aniline. Magnetic susceptibility measurements and theoretic analysis of a similar model complex leads to the conclusion that the iron oxidation state in 3 may be considered between iron (I) and iron(III) (close to iron(I)), whereas in 4 and 5 it is close to iron(II).