Selective fitness of four episomal shuttle-vectors carrying HIS3, LEU2, TRP1, and URA3 selectable markers in Saccharomyces cerevisiae

A comparison of the selective fitness of four 2-microm-based shuttle-plasmids carrying the yeast genes HIS3, LEU2, TRP1, and URA3 was performed. The effect of each marker on long-term growth rate and plasmid maintenance was measured. In selective medium, the LEU2 and URA3 plasmids were maintained at the lowest and the highest levels, respectively, while the HIS3 and TRP1 plasmids were maintained at an intermediate level. In synthetic complete medium, plasmid loss rate was lower for the genes TRP1 and URA3 than for the other two markers, and a similar pattern was observed for cells growing in rich medium. These results were confirmed by competition experiments among transformants with different plasmids in complete and rich media, indicating a different degree of fitness for the markers used. A potential correlation of the energy cost of plasmid maintenance with the secondary DNA structure and the level of expression of the selective markers is also investigated.     

Construction of hybrid plasmids containing the yeast replicator

In Saccharomyces cerevisiae strain 6-1G-P188 about 10 per cent of rRNA genes exist as extrachromosomal copies of rDNA repeating units. These extrachromosomal copies can be isolated as covalently closed molecules with lengths around 3mu. We have constructed a set of hybrid plasmids containing the bacterial vector pBR325, the LEU2 gene of yeast encoding beta-isopropylmalatedehydrogenase and various EcoRI restriction fragments of the 3mu DNA. We have tested the ability of our hybrid plasmids to transform LEU2 strain DC5 to leucine prototrophy. One of the plasmids Rcp21/11 transforms DC5 at the frequency comparable with that obtained with YEp13, containing the 2mu DNA replication origin. The 2400 bp EcoRI-B fragment of the 3mu DNA in Rcp21/11 carries a gene for 5S rRNA and two spacers. Our results on transformation experiments allow un to suggest that this EcoRI fragment also carries the 3mu DNA replication origin. Yeast transformants containing this plasmid are highly unstable but during the prolonged growth in selective conditions the stabilization of the LEU+ phenotype is observed being most likely a result of integration of Rcp21/11 into the yeast chromosome.     

Plasmid construction by homologous recombination in yeast

We describe a convenient method for constructing new plasmids that relies on interchanging parts of plasmids by homologous recombination in Saccharomyces cerevisiae. A circular recombinant plasmid of a desired structure is regenerated after transformation of yeast with a linearized plasmid and a DNA restriction fragment containing appropriate homology to serve as a substrate for recombinational repair. The free ends of the input DNA molecules need not be homologous in order for efficient recombination between internal homologous regions to occur. The method is particularly useful for incorporating into or removing from plasmids selectable markers, centromere or replication elements, or particular alleles of a gene of interest. Plasmids constructed in yeast can subsequently be recovered in an Escherichia coli host. Using this method, we have constructed an extended series of new yeast centromere, episomal and replicating (YCp, YEp, and YRp) plasmids containing, in various combinations, the selectable yeast markers LEU2, HIS3, LYS2, URA3 and TRP1.     

Insertion of transposon Tn9 into the spinal (Escherichia coli-Saccharomyces cerevisiae) plasmids and the expression of the prokaryotic gene of chloramphenicol resistance in yeast cells

Transposon Tn9 carrying camr gene which controls resistance to chloramphenicol has been introduced in vivo (in cells of Escherichia coli) into two chimeric shuttle plasmids pYF91 and YEp13. These plasmids consist of the different parts of the E. coli plasmid pBR322, the yeast 2mkm DNA plasmid and the yeast LEU2 structural gene. The plasmidis able to autonomously replicate in both yeast and bacterial cells. A recipient yeast strain carrying cams and leu2 markers was constructed to study the functional expression of the prokaryotic camr gene in eukaryotic yeast cells. The chimeric plasmids pYF91::Tn9 and YEp13::Tn9 were introduced into the yeast and bacterial recipient strains by transformation. The camr LEU2 yeast transformants were isolated. They were genetically unstable when grown on non-selective medium and they simultaneously lost camr and LEU2 markers with a frequency of 10 to 30%. The E. coli transformants were genetically stable under nonselective conditions and they maintain all plasmid markers. The chimeric plasmid pYF91::Tn9 was isolated from the yeast transformants and reintroduced into the cams leuB bacterial strain by transformation. The camr LEUB transformants were obtained. All these data confirm the possibility of the expression of the prokaryotic camr gene in yeast cells and present evidence for introduction of transposon Tn9 into chimeric plasmids.     

Construction and characterization of three yeast-Escherichia coli shuttle vectors designed for rapid subcloning of yeast genes on small DNA fragments

We have constructed three new subcloning plasmid vectors, pRC1, pRC2, and pRC3, derived from pKC7, which allow the rapid, single-step subcloning of yeast genes. Subcloning with these vectors utilizes a partial digestion with Sau3A to generate a quasi-random set of DNA fragments from the original plasmid. All three vectors contain a kanamycin resistance gene. Therefore, if the original cloned yeast DNA fragment is present in a vector that does not specify kanamycin resistance, the subclone pool can be propagated in Escherichia coli in the presence of kanamycin to select against parent plasmids that escaped restriction by Sau3A. Selection by complementation in yeast yields a collection of plasmids with smaller yeast DNA inserts containing the gene of interest. In the vectors pRC2 and pRC3, constructed from pRC1, the unique BamHI site is located within an intact tetracycline resistance gene, thus making it possible to screen bacterial transformants for those containing recombinant plasmid molecules. Vectors pRC2 and pRC3 also contain the yeast 2 micrometers DNA replication origin, and thus are more stable than plasmids carrying only the TRP1-associated replicator (ars1).     

Mechanism of high-copy-number integration of pMIRY-type vectors into the ribosomal DNA of Saccharomyces cerevisiae

Targeted integration of the yeast plasmid pMIRY2 into the ribosomal DNA (rDNA) of Saccharomyces cerevisiae by homologous recombination results in transformants carrying 100-200 copies of the plasmid per cell which are stably maintained over a large number of generations [Lopes et al., Gene 79 (1989) 199-206]. These properties make pMIRY2 an attractive vector for high-level production of (heterologous) proteins by yeast cells. We have investigated the mechanism underlying high-copy-number (hcn) integration of pMIRY-type plasmids and show that either targeting to a location outside the rDNA locus or use of the wild-type LEU2, instead of the deficient LEU2d gene, as selection marker reduces the copy number to the low value characteristic of standard integrating (YIp-type) yeast plasmids. Further experiments demonstrate that the hcn of pMIRY-type plasmids is achieved by amplification of a small number of copies initially integrated into the rDNA locus. Amplification depends upon the strong selection pressure created by the extremely low expression of the deficient LEU2d gene, but not on the presence of this gene per se. The hcn integration also occurs when either the TRP1 or URA3 gene is used as the selection marker, provided expression of the marker gene is severely curtailed, e.g., by removal of most of its 5'-flanking region.     

Isolation of a yeast vector marked by the mutation of multiple resistance to antibiotics

The plasmid mutation AntR determining multiple resistance to antibiotics--tetracycline and cycloheximide in Saccharomyces cerevisiae was earlier obtained and genetically characterized. In this work we describe experiments on cytoduction and transformation, proving the localization of this mutation in the yeast 2 mu DNA. As a result of cotransformation of the sensitive cells carrying a double mutation in the gene LEU2 with the yeast vector marked by LEU2 and 2 mu DNA obtained from the yeast AntR mutant, the Leu+ AntR clones were selected. Though the primary co-transformans contain both plasmids in an unlinked state, we managed to get clones in which the markers AntR and LEU2 were linked. The putative recombinant molecules were cloned in Escherichia coli and then introduced into the yeast recipient cells, differing by the presence of the endogenous 2 mu DNA. Retransformation of cir0 cells results in the appearance of the clones in which LEU2 and AntR markers segregate together. Thus, the result of cotransformation and selection in vivo is that the mutation of multiple resistance was included into the yeast vector plasmid, presumably, in its 2 mu part.     

A family of yeast expression vectors containing the phage f1 intergenic region

The construction and characterization of a family of yeast expression vectors is described. They have the following features: plasmid replication and selection (ApR) in Escherichia coli, packaging of single-stranded (ss) DNA upon infection of E. coli with a filamentous helper phage, replication in Saccharomyces cerevisiae based on the 2 mu plasmid origin of replication (ori), selection in yeast by complementation of LEU2 (pVT-L series, size 6.3 kb) or URA3 gene (pVT-U series, size 6.9 kb) and seven unique restriction sites for cloning within an 'expression cassette' which includes the promoter and 3' sequence of the ADH1 gene. The multiple cloning site as well as the ori and intergenic region of the phage f1 have been cloned in two orientations for convenient gene cloning and ssDNA strand selection. As a result any of these eight vectors can be chosen for cloning, expressing genes in yeast, sequencing and mutagenesis without the need for recloning into specialized vectors.     

Study of the stability of hybrid plasmids replicating in Saccharomyces cerevisiae due to DNA fragments from polyoma virus

Hybrid plasmid pSP97 carrying the entire genome of polyoma virus (PY), inserted into bacterial vector psV3, transforms yeast cells with the frequency 1 x 10(-2). Plasmid pSP97 is capable of autonomous replication in S. cerevisiae, while its structure remains unaltered, the stability of hybrid plasmid in transformants is 44%--100%. Plasmid pSP155 consisting of Ori-containing DNA segment from polyoma, pBR322 and yeast gene arg4, transforms yeast cells with the frequency 5 x 10(-3), the stability of plasmid in transformants is 23%--29%. Two types of plasmids were isolated from transformants: one was identical to SP155, while the another differed structurally and phenotypically from SP155. Plasmids pSP113 and pSP114, in addition to pBR322 and yeast gene arg4, contain a viral DNA segment that encodes genes from small and middle T-antigens. These plasmids transform yeast cells with low frequency (2 x 10(-4), 3 x 10(-5)), the stability of plasmids in yeast transformants is 100%. However, hybrid plasmids identical to pSP113 were isolated from transformants. Structural rearrangements have been observed in pSP114, which carries the arg4 gene in reversed orientation compared to pSP113.     

Transformation of Saccharomyces cerevisiae with UV-irradiated single-stranded plasmid.

UV-irradiated single-stranded replicative plasmids were used to transform different yeast strains. The low doses of UV used in this study (10-75 J/m2) caused a significant decrease in the transforming efficiency of plasmid DNA in the Rad+ strain, while they had no effect on transformation with double-stranded plasmids of comparable size. Neither the rev3 mutation, nor the rad18 or rad52 mutations influenced the efficiency of transformation with irradiated single-stranded plasmid. However, it was found to be decreased in the double rev3 rad52 mutant. Extracellular irradiation of plasmid that contains both URA3 and LEU2 genes (psLU) gave rise to up to 5% Leu- transformants among selected Ura+ ones in the repair-proficient strain. Induction of Leu- transformants was dose-dependent and only partially depressed in the rev3 mutant. These results suggest that both mutagenic and recombinational repair processes operate on UV-damaged single-stranded DNA in yeast.     

Modulating heterologous protein production in yeast: the applicability of truncated auxotrophic markers

The use of auxotrophic Saccharomyces cerevisiae strains for improved production of a heterologous protein was examined. Two different marker genes were investigated, encoding key enzymes in the metabolic pathways for amino acid (LEU2) and pyrimidine (URA3) biosynthesis, respectively. Expression plasmids, carrying the partly defective selection markers LEU2d and URA3d, were constructed. Two CEN.PK-derived strains were chosen and insulin analogue precursor was selected as a model protein. Different truncations of the LEU2 and URA3 promoters were used as the mean to titrate the plasmid copy number and thus the recombinant gene dosage in order to improve insulin productivity. Experiments were initially carried out in batch mode to examine the stability of yeast transformants and to select high yielding mutants. Next, chemostat cultivations were run at high cell density to address industrial applicability and long-term expression stability of the transformants. We found that the choice of auxotrophic marker is crucial for developing a yeast expression system with stable heterologous protein production. The incremental truncation of the URA3 promoter led to higher plasmid copy numbers and IAP yields, whereas the truncation of the LEU2 promoter caused low plasmid stability. We show that the modification of the level of the recombinant gene dosage by varying the degree of promoter truncation can be a strong tool for optimization of productivity. The application of the URA3d-based expression systems showed a high potential for industrial protein production and for further academic studies.     

Cloning of Saccharomyces cerevisiae DNA replication genes: isolation of the CDC8 gene and two genes that compensate for the cdc8-1 mutation.

The CDC8 gene, whose product is required for DNA replication in Saccharomyces cerevisiae, has been isolated on recombinant plasmids. The yeast vector YCp50 bearing the yeast ARS1, CEN4, and URA3 sequences, to provide for replication, stability, and selection, respectively, was used to prepare a recombinant plasmid pool containing the entire yeast genome. Plasmids capable of complementing the temperature-sensitive cdc8-1 mutation were isolated by transformation of a cdc8-1 mutant and selection for clones able to grow at the nonpermissive temperature. The entire complementing activity is carried on a 0.75-kilobase fragment, as revealed by deletion mapping. This fragment lies 1 kilobase downstream from the well-characterized sup4 gene, a gene known to be genetically linked to CDC8, thus confirming that the cloned gene corresponds to the chromosomal CDC8 gene. Two additional recombinant plasmids that complement the cdc8-1 mutation but that do not contain the 0.75-kilobase fragment or any flanking DNA were also identified in this study. These plasmids may contain genes that compensate for the lack of CDC8 gene product.     

Transformation in yeast: development of a hybrid cloning vector and isolation of the CAN1 gene.

We have constructed a plasmid, YEp13, which when used in conjunction with transformation in yeast is a suitable vector for isolating specific yeast genes. The plasmid consists of pBR322, the LEU2 gene of yeast, and a DNA fragment containing a yeast origin of replication from 2 mu circule. We have demonstrated the utility of this cloning system by isolating the yeast gene encoding the arginine permease, CAN1, from a pool of random yeast DNA fragments inserted into YEp13.     

New yeast-Escherichia coli shuttle vectors constructed with in vitro mutagenized yeast genes lacking six-base pair restriction sites

We describe the production of new alleles of the LEU2, URA3 and TRP1 genes of Saccharomyces cerevisiae by in vitro mutagenesis. Each new allele, which lacks restriction enzyme recognition sequences found in the pUC19 multicloning site, was used to construct a unique series of yeast-Escherichia coli shuttle vectors derived from the plasmid pUC19. For each gene a 2 mu vector (YEplac), an ARS1 CEN4 vector (YCplac) and an integrative vector (YIplac) was constructed. The features of these vectors include (i) small size; (ii) unique recognition site for each restriction enzyme found in the pUC19 multicloning site; (iii) screening for plasmids containing inserts by color assay; (iv) high plasmid yield; (v) efficient transformation of S. cerevisiae. These vectors should allow greater flexibility with regard to DNA restriction fragment manipulation and subcloning.     

Cloning and expression of the 3-isopropylmalate dehydrogenase gene from Candida albicans

Abstract A variety of Saccharomyces cerevisiae genes e.g. HIS3, LEU2, TRP1, URA3 , are expressed in Escherichia coli and have been isolated by complementation of mutations in the corresponding E. coli genes [1]. The LEU2 gene was one of the first S. cerevisiae genes to be isolated in this way [2], and its isolation led to the development of transformation systems for S. cerevisiae [3,4]. The leuB gene in E. coli [5] and the LEU2 gene in S. cerevisiae [6] both code for 3-isopropylmalate dehydrogenase (3-IMDH; EC 1.1.1.85) which is essential for the biosynthesis of leucine in both organisms. This paper describes the cloning of a fragment of C. albicans DNA carrying the gene for 3-IMDH which will be useful in the development of transformation methods in C. albicans .     

Targeted DNA integration within different functional gene domains in yeast reveals ORF sequences as recombinational cold-spots

The efficiency of gene targeting within different segments of genes in yeast was estimated by transforming yeast cells with double-stranded integrative plasmids, bearing functional gene domains [promoter (P), ORF (O) and terminator (T)] derived from the common genetic markers HIS3, LEU2 , TRP1 and URA3. Transformation experiments with circular plasmids carrying a single gene domain demonstrated that the 5 and 3 flanking DNA regions (P and T) of the HIS3 and URA3 genes are preferred as sites for plasmid integration by several fold over the corresponding ORFs. Moreover, when plasmids bearing combinations of two or three regions were linearized to target them to a specific site of integration, three of the ORFs were found to be less preferred as sites for plasmid integration than their corresponding flanking regions. Surprisingly, in up to 50% of the transformants obtained with plasmids that had been linearized within coding sequences, the DNA actually integrated into neighbouring regions. Almost the same frequencies of ORF mis-targeting were obtained with plasmid vectors containing only two functional domains (PO or OT) of the gene URA3, demonstrating that this event is not the consequence of competition between homologous DNA regions distal to the ORF. Therefore, we suggest that coding sequences could be considered to be cold spots for plasmid integration in yeast.Communicated by A. Aguilera     

Use of interplasmid recombination to generate stable selectable markers for yeast transformation: application to studies of actin gene control

A plasmid recombination system has been developed that relies upon interplasmid exchanges for yeast cell viability. Two types of plasmids, one carrying the LEU2 allele inserted within yeast actin gene sequences and the other carrying 2-microns plasmid DNA and an intact actin gene, were constructed. Neither plasmid alone yielded transformants in the haploid Leu- strain AH22, but when cotransformed, a number of colonies were obtained. Southern blot analysis revealed that transformants arose because of recombination events within the homologous actin sequences that transferred the LEU2 gene to the actin gene on the 2-microns plasmid. The recombinant plasmids could be recovered, and sequence analysis of one recombination site revealed that the exchange event was faithful at the nucleotide level. The resulting recombinant plasmids carried a defective actin gene and presumably arose because of a double-crossover event. Deletion mutations that prevented actin gene expression on one donor plasmid enabled the recovery at a high frequency of transformants resulting primarily from single-crossover events between the two plasmids. This was presumably because such events no longer generated an intact actin gene on a multicopy plasmid. Infrequently a transformant from a plasmid with an intact gene was recovered, but in these cases the plasmid was not present in multiple copies. These cells exhibited a slower growth rate, and Northern blot analysis revealed an elevated level of actin mRNA.     

Cloning, Disruption and Chromosomal Mapping of Yeast LEU3 , a Putative Regulatory Gene

The LEU3 gene of the yeast Saccharomyces cerevisiae, which is involved in the regulation of at least two LEU structural genes (LEU1 and LEU2), has been cloned by complementation of leu3 mutations and shown to reside within a 5.6-kb fragment. Transformation of leu3 mutants with LEU3-carrying multicopy plasmids restored normal, leucine-independent growth behavior in the recipients. It also restored approximately wild-type levels of isopropylmalate isomerase (LEU1) and beta-isopropylmalate dehydrogenase (LEU2), which were strongly reduced when exogenous leucine was supplied. Strains containing a disrupted leu3 allele were constructed by deleting 0.7-kb of LEU3 DNA and inserting the yeast HIS3 gene in its place. Like other leu3 mutants, these strains were leaky leucine auxotrophs, owing to a basal level of expression of LEU1 and LEU2. Southern transfer and genetic analyses of strains carrying a disrupted leu3 allele demonstrated that the cloned gene was LEU3, as opposed to a suppressor. Disruption of LEU3 was performed also with a diploid and shown to be nonlethal by tetrad analysis. Northern transfer experiments showed that the LEU3 gene produces mRNA approximately 2.9 kilonucleotides in length. The leu3 marker was mapped to chromosome XII by the spo11 method. Linkage to ura4 by about 44 centiMorgans places leu3 on the right arm of this chromosome.     

Mutants of S. CEREVISIAE Defective in the Maintenance of Minichromosomes

We have isolated yeast mutants that are defective in the maintenance of circular minichromosomes. The minichromosomes are mitotically stable plasmids, each of which contains a different ARS (autonomously replicating sequence), a centrometeric sequence, CEN5, and two yeast genes, LEU2 and URA3. Forty minichromosome maintenance-defective (Mcm-) mutants were characterized. They constitute 16 complementation groups. These mutants can be divided into two classes, specific and nonspecific, by their differential ability to maintain minichromosomes with different ARSs. The specific class of mutants is defective only in the maintenance of minichromosomes that carry a particular group of ARSs irrespective of the centromeric sequence present. The nonspecific class of mutants is defective in the maintenance of all minichromosomes tested irrespective of the ARS or centromeric sequence present. The specific class may include mutants that do not initiate DNA replication effectively at specific ARSs present on the minichromosomes; the nonspecific class may include mutants that are affected in the segregation and/or replication of circular plasmids in general.